Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Development of a large area reference cell based on modified C-SI-module technology

 
: Schmitt, P.; Schmidt, T.; Tranitz, M.; Brachmann, S.

:
Fulltext urn:nbn:de:0011-n-2669269 (87 KByte PDF)
MD5 Fingerprint: 3f5547e9ab2d8bb293141c28b97448af
Created on: 29.11.2013


Mine, A. ; European Commission:
28th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2013. Proceedings. DVD-ROM : 30 September to 04 October 2013, Paris, France
München: WIP-Renewable Energies, 2013
ISBN: 3-936338-33-7
pp.3488-3491
European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <28, 2013, Paris>
English
Conference Paper, Electronic Publication
Fraunhofer ISE ()
Photovoltaische Module; Systeme und Zuverlässigkeit; Silicium-Photovoltaik; Photovoltaische Module und Kraftwerke; Modulentwicklung; Modulcharakterisierung; module; and Testing; Cell

Abstract
Reference cells are preferably used for the calibration of solar cells, solar modules, solar power plants and solar simulators [1]. Module calibration can take place indoor in measuring laboratories and production facilities, as well as outdoor at the site of the plant. So far, conventional reference cells usually contain small solar cells with dimensions of less than 50 mm x 50 mm. The state-of-the-art reference cell architecture does not necessarily match the cells and materials used in the respective modules. With these two restrictions considerable disadvantages are associated such as limited measurement accuracy and error susceptibility. The Large Area Reference Cell (LARC®)-concept allows the use of the same cell technology with similar module materials as the device under test (DUT) as well as a large active cell area of 156 mm x 156 mm. It thereby omits expensive and error-prone post-processing of measured data and improves the accuracy of the measurements.

: http://publica.fraunhofer.de/documents/N-266926.html