Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Optimization of outdoor cultivation in flat panel airlift reactors for lipid production by Chlorella vulgaris

: Münkel, R.; Schmid-Staiger, U.; Werner, A.; Hirth, T.


Biotechnology & bioengineering 110 (2013), No.11, pp.2882-2893
ISSN: 0006-3592
ISSN: 1097-0290
Journal Article
Fraunhofer IGB ()

Microalgae are discussed as a potential renewable feedstock for biofuel production. The production of highly concentrated algae biomass with a high fatty acid content, accompanied by high productivity with the use of natural sunlight is therefore of great interest. In the current study an outdoor pilot plant with five 30L Flat Panel Airlift reactors (FPA) installed southwards were operated in 2011 in Stuttgart, Germany. The patented FPA reactor works on the basis of an airlift loop reactor and offers efficient intermixing for homogeneous light distribution. A lipid production process with the microalgae Chlorella vulgaris (SAG 211-12), under nitrogen and phosphorous deprivation, was established and evaluated in regard to the fatty acid content, fatty acid productivity and light yield. In the first set of experiments limitations caused by restricted CO2 availability were excluded by enriching the media with NaOH. The higher alkalinity allows a higher CO2 content of suppl ied air and leads to doubling of fatty acid productivity. The second set of experiments focused on how the ratio of light intensity to biomass concentration in the reactor impacts fatty acid content, productivity and light yield. The specific light availability was specified as mol photons on the reactor surface per gram biomass in the reactor. This is the first publication based on experimental data showing the quantitative correlation between specific light availability, fatty acid content and biomass light yield for a lipid production process under nutrient deprivation and outdoor conditions. High specific light availability leads to high fatty acid contents. Lower specific light availability increases fatty acid productivity and biomass light yield. An average fatty acid productivity of 0.39gL-1day-1 for a 12 days batch process with a final fatty acid content of 44.6% [w/w] was achieved. Light yield of 0.4gmolphotons-1 was obtained for the first 6 days of cultivation.