Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

System technology for laser-assisted milling with tool integrated optics

: Hermani, J.-P.; Emonts, M.; Brecher, C.


Hendow, S.T. (Ed.) ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
Fiber Lasers X. Technology, Systems, and Applications : San Francisco, California, USA; February 02, 2013
Bellingham, WA: SPIE, 2013 (Proceedings of SPIE 8601)
ISBN: 978-0-8194-9370-5
Paper 860125
Conference "Fiber Lasers - Technology, Systems, and Applications" <10, 2013, San Francisco/Calif.>
Conference Paper
Fraunhofer IPT ()

High strength metal alloys and ceramics offer a huge potential for increased efficiency (e. g. in engine components for aerospace or components for gas turbines). However, mass application is still hampered by cost- and time-consuming end-machining due to long processing times and high tool wear. Laser-induced heating shortly before machining can reduce the material strength and improve machinability significantly. The Fraunhofer IPT has developed and successfully realized a new approach for laser-assisted milling with spindle and tool integrated, co-rotating optics. The novel optical system inside the tool consists of one deflection prism to position the laser spot in front of the cutting insert and one focusing lens. Using a fiber laser with high beam quality the laser spot diameter can be precisely adjusted to the chip size. A high dynamic adaption of the laser power signal according to the engagement condition of the cutting tool was realized in order not to irradia te already machined work piece material. During the tool engagement the laser power is controlled in proportion to the current material removal rate, which has to be calculated continuously. The needed geometric values are generated by a CAD/CAM program and converted into a laser power signal by a real-time controller. The developed milling tool with integrated optics and the algorithm for laser power control enable a multi-axis laser-assisted machining of complex parts.