Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Distinguishing between individual contributions to the via resistance in carbon nanotubes based interconnects

 
: Fiedler, H.; Toader, M.; Hermann, S.; Rodriguez, R.D.; Sheremet, E.; Rennau, M.; Schulze, S.; Waechtler, T.; Hietschold, M.; Zahn, D.R.T.; Schulz, S.E.; Gessner, T.

:

ECS journal of solid state science and technology : jss 1 (2012), No.6, pp.M47-M51
ISSN: 2162-8769
ISSN: 2162-8777
English
Journal Article
Fraunhofer ENAS ()

Abstract
We report on the design and fabrication of carbon nanotube (CNT) vias based on a hybrid metal/CNT technology. The CNTs were integrated on a 4 inch Si wafer platform using conventional semiconductor processes. Multiwalled carbon nanotubes were grown vertically aligned on a copper based metal line. Via holes were prepared using a single damascene process. By employing a substrate-based selective deactivation of the catalyst, CNT growth was restricted to the vias. Following this process scheme, the impact of post-CNT growth procedures, like chemical mechanical planarization and sample annealing, were investigated and electrically evaluated using conductive atomic force microscopy and current-voltage (I-V) characterization. Probing 440 individual structures, the resistance of two series-connected 5 ?m vias were determined to be (800 ± 60) ? after chemical mechanical planarization. By obtaining the I-V characteristics of single CNTs within an individual via, we found that the measured resistance is determined by the contact resistance of the CNT-metal interface. Two mechanisms were found to be relevant here. First partial oxidation of the metal interface during processing, and secondly, stress-induced voiding caused by the high temperatures during the CNT growth process. Changes in the integration scheme to reduce the overall CNT via resistance are proposed.

: http://publica.fraunhofer.de/documents/N-229450.html