Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Studies on Wet-Chemical Surface Conditioning for Al2o3 Passivation Layers Deposited with ALD

 
: Breitenstein, L.; Richter, A.; Hermle, M.; Warta, W.

:
Fulltext urn:nbn:de:0011-n-2210403 (410 KByte PDF)
MD5 Fingerprint: ae635d7903b25a3d609d9e7702c789e2
Created on: 7.12.2012


European Commission:
26th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC. Proceedings : 5th to 9th September 2011 at the CCH - Congress Centre and International Fair Hamburg in Germany
München: WIP-Renewable Energies, 2011
ISBN: 3-936338-27-2
pp.2247-2251
European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <26, 2011, Hamburg>
English
Conference Paper, Electronic Publication
Fraunhofer ISE ()
Solarzellen - Entwicklung und Charakterisierung; Silicium-Photovoltaik; Oberflächen: Konditionierung; Passivierung; Lichteinfang; Produktionsanlagen und Prozessentwicklung

Abstract
In order to enhance the passivation quality of thin Al2O3 layers in an Al2O3/SiNx stack an appropriate pre-deposition cleaning and wet-chemical surface conditioning plays an important role. In this study we present findings on the influence of wet-chemical surface conditioning on the passivation quality of thin ALD Al2O3 layers in an Al2O3/SiNx stack. Differently terminated sample surfaces have been investigated. Two different wet-chemical oxides, a HF last step as well as a native grown oxide of an out-of-box wafer have been analyzed regarding their impact on the passivation quality. Also the hydrophilic properties of the surface without a dielectric passivation layer have been measured. We find a direct correlation of the hydrophilic properties and passivation quality of the surface termination on the passivation quality of the Al2O3/SiNx stack. So far, a 60 s HF last step was found to be the best surface treatment for 5 nm Al2O3 layers. In comparison, a surface conditioning by wet-chemical oxides leads to lower lifetimes. In contrast native oxides grown on cleaned wafers were found to enhance the homogeneity and the passivation quality of Al2O3/SiNx stack systems with 0.5 nm Al2O3 layers significantly. Thereby the firing stability of the stack system is not affected.

: http://publica.fraunhofer.de/documents/N-221040.html