Options
2004
Journal Article
Titel
Calculation of high frequency ultrasonic signals for shear wave insonification in solid material
Abstract
The goal of the theoretical part is to simulate an automatic ultrasonic inspection with contact technique shear wave probes, where the high frequency signals are captured and used to perform a reconstruction based on the synthetic aperture focusing method "SAFT". Therefore the ultrasonic probe, the scanning path and the defects are parameters in a CAD model. The scattering behavior of the defect is calculated by the Kirchhoff approximation in its elastodynamic version. The result of the simulation - the high frequency data - and the result of the SAFT-reconstructions are compared with experimental results on a steel test block with side drilled and flat bottom holes. The model is validated by the experiment. One of the applications of the model is to identify multiple reflections.