Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Single-wafer tracking in PV production lines

 
: Rein, S.; Krieg, A.; Weil, A.; Emanuel, G.; Glatthaar, M.; Grohe, A.; Preu, R.; Sattler, B.; Lorch, P.; Vayhinger, K.

:
Fulltext urn:nbn:de:0011-n-2098076 (386 KByte PDF)
MD5 Fingerprint: d4ff1afd12f46f19084a38430f40556a
Created on: 6.9.2012


Lincot, D. ; European Commission, Joint Research Centre -JRC-:
The compiled state-of-the-art of PV solar technology and deployment. 23rd European Photovoltaic Solar Energy Conference, EU PVSEC 2008. Proceedings. CD-ROM : Held in Valencia, Spain, 1 - 5 September 2008; Proceedings of the international conference
München: WIP-Renewable Energies, 2008
ISBN: 3-936338-24-8
ISBN: 978-3-936338-24-9
pp.1125-1130
European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <23, 2008, Valencia>
English
Conference Paper, Electronic Publication
Fraunhofer ISE ()

Abstract
Single-wafer tracking gains importance in PV production due to the increasing number of research lines and due to the expected deeper insight into the technological processes. Since pure logistic tracking is not robust enough for industrial application, a procedure for wafer identification is developed based on a standard bar code which is laser-scribed into the surface of the wafer within the active area of the solar cell and read-out with a specially developed vision system. The laser marking is shown to be robust enough to endure the various manufacturing steps and not to affect cell performance. The quality of different codes and the robustness of code detection by automatic vision inspection are investigated for the whole variety of different surfaces in solar cell manufacturing. Although the bar codes are hidden under diffuse illumination, they are clearly visible under direct illumination and can be decoded by a special image processing procedure. For cell processes with surface texturing on mono- and multi-crystalline silicon average detection rates of 97% and 94% are already achieved over the whole process sequence. As there is potential for improvement, the present work provides the basis for a robust tracking system in the near future.

: http://publica.fraunhofer.de/documents/N-209807.html