Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Fabrication and evaluation of SixNy coatings for total joint replacements

 
: Olofsson, J.; Pettersson, M.; Teuscher, N.; Heilmann, A.; Larsson, K.; Grandfield, K.; Persson, C.; Jacobson, S.; Engqvist, H.

:

Journal of materials science. Materials in medicine 23 (2012), No.8, pp.1879-1889
ISSN: 0957-4530
ISSN: 1573-4838
English
Journal Article
Fraunhofer IWM ( IMWS) ()
Fraunhofer IWM ()
silicon-nitride femoral heads; thin films; residual stresses; wear resistance; hip implants; ceramics; friction; hardness; carbide

Abstract
Wear particles from the bearing surfaces of joint implants are one of the main limiting factors for total implant longevity. Si3N4 is a potential wear resistant alternative for total joint replacements. In this study, SixNy-coatings were deposited on cobalt chromium-discs and Si-wafers by a physical vapour deposition process. The tribological properties, as well as surface appearance, chemical composition, phase composition, structure and hardness of these coatings were analysed. The coatings were found to be amorphous or nanocrystalline, with a hardness and coefficient of friction against Si3N4 similar to that found for bulk Si3N4. The low wear rate of the coatings indicates that they have a potential as bearing surfaces of joint replacements. The adhesion to the substrates remains to be improved.

: http://publica.fraunhofer.de/documents/N-206350.html