Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

A resonant cantilever sensor for monitoring airborne nanoparticles

 
: Wasisto, H.S.; Merzsch, S.; Stranz, A.; Waag, A.; Kirsch, I.; Uhde, E.; Salthammer, T.; Peiner, E.

:

Institute of Electrical and Electronics Engineers -IEEE-:
16th International Solid-State Sensors, Actuators and Microsystems Conference, TRANSDUCERS 2011 : 5-9 June 2011, Beijing
New York, NY: IEEE, 2011
ISBN: 978-1-4577-0157-3
ISBN: 978-1-4577-0156-6
pp.1116-1119
International Solid-State Sensors, Actuators and Microsystems Conference <16, 2011, Beijing>
English
Conference Paper
Fraunhofer WKI ()

Abstract
In this paper, a silicon resonant cantilever sensor is used for monitoring airborne nanoparticles (NPs) by detecting the resonant frequency shift that is directly induced by an additional NPs mass deposited on it. A piezoelectric stack actuator and a self-sensing technique using a piezoresistive strain gauge are involved in the sensor system in order to actuate and detect the oscillation of cantilever sensor, respectively. The dielectrophoresis (DEP) method is employed for trapping the airborne NPs in a stable carbon aerosol assessment. A thermal-induced frequency shift is also investigated with the purpose of observing the limitation imposed by thermal effects on the minimum detectable NPs mass. The proposed sensor reveals a mass sensitivity of 8.33 Hz/ng, a fundamental resonant frequency of 43.92 kHz, a quality factor of 1230, and a temperature coefficient of the resonant frequency (TCf) of 28.6 ppm/C. The results demonstrate a possibility of using this resonant canti lever in mobile airborne sensor applications.

: http://publica.fraunhofer.de/documents/N-189393.html