Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites by Selective Laser Melting (SLM): Densification, growth mechanism and wear behavior

 
: Gu, D.; Hagedorn, Y.-C.; Meiners, W.; Wissenbach, K.; Poprawe, R.

:

Composites science and technology 71 (2011), No.13, pp.1612-1620
ISSN: 0266-3538
English
Journal Article
Fraunhofer ILT ()

Abstract
Selective Laser Melting (SLM) Additive Manufacturing (AM) process was used to produce nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites. The influence of " volumetric energy density" () on densification activity, microstructural feature, nanohardness, and wear behavior of SLM-processed parts was studied. The densification levels of TiC/Ti parts remained above 97% as 120J/mm3. A further decrease in lowered the densification rate, due to the occurrence of balling effect. The TiC reinforcement experienced an interesting morphological change from the coarsened dendritic TiC (360J/mm3) to the accumulated whisker-structured TiC (180J/mm3) and to the uniformly dispersed nanoscale lamellar TiC (120J/mm3). As of 120J/mm3 was properly settled, the dynamic nanohardness (90.9GPa) and elastic modulus (256GPa) of SLM-processed TiC/Ti nanocomposites showed respectively ~22.7-fold and ~2.4-fold increase upon that of the unreinforced Ti. A uniform distribution of frict ion coefficient with a low average value <0.2 was obtained, leading to a considerably reduced wear rate of 1.8×10-7mm3/(Nm). A disappearance of nanostructured TiC reinforcement at an elevated of 360J/mm3 lowered the mechanical properties of TiC/Ti part consisting of the coarsened dendritic TiC.

: http://publica.fraunhofer.de/documents/N-189299.html