Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

A W-band x12 frequency multiplier MMIC in waveguide package using quartz and ceramic transitions

 
: Weber, R.; Tessmann, A.; Zink, M.; Kuri, M.; Stulz, H.-P.; Riessle, M.; Massler, H.; Maier, T.; Leuther, A.; Schlechtweg, M.; Kallfass, I.

:

IEEE Electron Devices Society; IEEE Solid-State Circuits Society; IEEE Microwave Theory and Techniques Society:
IEEE Compound Semiconductor Integrated Circuit Symposium, CSIC 2011 : 16-19 October 2011, Waikoloa, Hawaii
Piscataway/NJ: IEEE, 2011
ISBN: 978-1-61284-711-5 (Print)
ISBN: 978-1-61284-710-8 (Online)
ISBN: 978-1-61284-712-2
4 pp.
Compound Semiconductor Integrated Circuit Symposium (CSICS) <33, 2011, Waikoloa/Hawai>
English
Conference Paper
Fraunhofer IAF ()
metamorphic high electron mobility transistor; millimeter-wave monolithic integrated circuit; frequency multiplier; split-block module; waveguide package

Abstract
This paper describes a single-chip W-band frequency multiplier MMIC in a waveguide package. The multiplication factor by 12 has been obtained with a doubler, tripler and doubler chain. The MMIC has been realized in a 100 nm metamorphic HEMT technology. It has been packaged in a splitblock module using a high precision 50 µm thick quartz transition for the W-band output and a low cost ceramic transition on the input. A power supply board, embedded in the module, provides six different voltages to the MMIC. The packaged frequency multiplier achieves an output power of -0.8 dBm, a conversion gain of 0.2 dB and a 3-dB bandwidth of 16 GHz from 86 to 102 GHz with a suppression of the unwanted harmonics of more than 25.5 dBc. The phase-noise of the output signal is not affected by the multiplier circuit.

: http://publica.fraunhofer.de/documents/N-185825.html