Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Deposition of PZT thin film onto copper-coated polymer films by mean of pulsed-DC and RF-reactive sputtering

 
: Suchaneck, G.; Labitzke, R.; Adolphi, B.; Jastrabik, L.; Adamek, P.; Drahokoupil, J.; Hubicka, Z.; Kiselev, D.A.; Kholkin, A.L.; Gerlach, G.; Dejneka, A.

Surface and coatings technology 205 (2011), Supplement 2, pp.S241-S244
ISSN: 0257-8972
International Conference on Plasma Surface Engineering (PSE) <12, 2010, Garmisch-Partenkirchen>
English
Journal Article, Conference Paper
Fraunhofer FEP ()
pulsed DC reactive sputtering; RF reactive sputtering; temperature sensitive polymer substrate; complex oxide film deposition

Abstract
In this work, Pb(Zr,Ti)O3 (PZT) thin films were deposited onto flexible Cu-coated Kapton® substrates by means of reactive magnetron sputtering for the first time. Different power supplies were selected for each of the 200 mm targets to adjust film composition and substrate ion bombardment. High-power pulse sputtering has been employed for the Zr-target to enhance for formation of nanocrystals, pulsed DC sputtering for the Titarget to provide a high enough sputter yield, and RF-sputtering for the Pb-target to prevent droplet formation. The deposited films had a lead-enriched layer at the surface and their film composition was in rhombohedral range near the morphotropic phase boundary of the PZT phase diagram. XRD revealed a nanocrystallite mixture of lead, zirconium and titanium oxides in the as-deposited films which can be transferred into perovskite Pb(Zr,Ti)O3 by rapid temperature annealing. Observed piezoelectric properties demonstrate that rapid-temperature-annealed films are promising for application in flexible piezoelectric sensors, actuators and power generators.

: http://publica.fraunhofer.de/documents/N-175873.html