Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Thin film growth on nanostructured polymer webs for anti-reflection purposes

 
: Munzert, P.; Schulz, U.; Kaiser, N.; Schönberger, W.; Fahland, M.

:

Surface and coatings technology 205 (2011), Supplement 2, pp.S498-S501
ISSN: 0257-8972
International Conference on Plasma Surface Engineering (PSE) <12, 2010, Garmisch-Partenkirchen>
English
Journal Article, Conference Paper
Fraunhofer IOF ()
Fraunhofer FEP ()
nanostructure; optical coating; plasma treatment; polymer; antireflection

Abstract
Nanostructures offer an alternative way of imparting anti-reflection properties to a surface, but most of the structuring techniques are quite complex and cost-intensive. At the Fraunhofer-IOF in Jena, a method for generating nanostructures on a PMMA surface by using a simple plasma-etching procedure has been developed. In the work described herein, we have attempted to transfer this technique to polymer webs in a roll-to-roll process with the intention of creating a highly effective and low-cost anti-reflection surface. Important for prospective applications of the webs is the protection of the nanostructured polymer surface by a thin glass-like layer. The challenge of this task is to enhance the mechanical stability without deteriorating the anti-reflection effect at the same time. First experiments involving the deposition of SiO2 layers in a thickness range from 15 nm to 45 nm on nanostructured TAC samples showed noticeable differences in the spectral reflectances obtained. While for "bump-like" nanostructures the average residual reflection could be minimized with increasing thickness of the protective layers, the reflectance curves of "sponge-like" samples were simply shifted to longer wavelengths. This could be rationalized in terms of different growth patterns of the SiO2 coatings, which were identified from SEM micrographs. While on a "bump-like" nanostructure the film enwraps the bumps and boosts the material/air fill factor in a suitable range for anti-reflection, a coating on a "sponge-like" structure closes the voids and grows redominantly on top of the structure. On such a "sponge"-type structure, the abrasion resistance can be significantly increased, almost reaching the value of the untreated surface.

: http://publica.fraunhofer.de/documents/N-174678.html