Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Influence of nano silver filler content on properties of ink-jet printed structures for microelectronics

 
: Falat, T.; Felba, J.; Moscicki, A.; Smolarek, A.; Bock, K.; Bonfert, D.

:

Institute of Electrical and Electronics Engineers -IEEE-; VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik -GMM-:
3rd Electronics System Integration Technology Conference, ESTC 2010. Proceedings. Vol.2 : Berlin, Germany, 13 - 16 September 2010
New York, NY: IEEE, 2010
ISBN: 978-1-4244-8553-6
ISBN: 978-1-4244-8554-3
pp.630-634
Electronics System Integration Technology Conference (ESTC) <3, 2010, Berlin>
English
Conference Paper
Fraunhofer IZM-M

Abstract
The influence of nano silver filler content on properties of ink-jet printed structures for microelectronics were investigated. Samples were prepared by using ink with different nano silver filler content: 44%, 41% and 38%. The electrical measurements were performed during and after heating process. It was shown, that filler content does not have a strong influence on sintering time, but it changes the final resistivity of printed and sintered structures. The enhancement of sintering process by UV exposure was also investigated. Preliminary results are promising and the further study will be conducted.

: http://publica.fraunhofer.de/documents/N-173194.html