Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Numerical analysis of crack propagation during the burr formation process of metals

 
: Regel, J.; Stoll, A.; Leopold, J.

:

International journal of machining and machinability of materials : IJMMM 6 (2009), No.1-2, pp.54-68
ISSN: 1748-5711
ISSN: 1748-572X
English
Journal Article
Fraunhofer IWU ()

Abstract
Because of increased productivity demands in manufacturing the attention in burr problems is steadily turned to the avoidance of burr. With this initial point this paper contributes to the analysis and simulation of burr separation at workpiece material AISI 1045 steel (C45E). At first 12 known crack initiation criteria are investigated whether they are suitable to simulate crack initiation during burr formation. It is shown that eight criteria are suitable for the prediction of the crack, whereas the criterion from Cockcroft and Latham has to be pointed out. The implementation of the failure conception of ductile damage from Lemaitre and Sievert indicates the applicability for burr formation simulation with simultaneous simulation of segmented chips. In first calculation, a sliding of the chip could be simulated. At the end the hypothesis of the 'hydrostatic bowl', an area of highly negative pressure in the stage of burr formation, is used to predict the location of cr ack initiation. The established values correlate better to the experimental tests than these, which are determined by means of fracture criteria.

: http://publica.fraunhofer.de/documents/N-172797.html