Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Direct diamond turning of steel molds for optical replication

 
: Klocke, F.; Dambon, O.; Bulla, B.; Heselhaus, M.

:

Yang, L. ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
Advanced optical manufacturing technologies. 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies 2008. Pt.1 : 19 - 21 November 2008, Chengdu, China
Bellingham, WA: SPIE, 2009 (Proceedings of SPIE 7282)
ISBN: 978-0-8194-7542-8
Paper 728202
International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT) <4, 2008, Chengdu>
English
Conference Paper
Fraunhofer IPT ()

Abstract
In this paper the most recent investigations in ultrasonic assisted diamond machining of hardened steel at the Fraunhofer IPT is presented. The goal of this technology is to unify the outrageous specifications of diamond machining process with steel material. The focus lies on the kinematic influence of the discrete frequencies 40 kHz and 60 kHz. Special interest is given to the reachable surface roughness depending on process parameters. The machined steel (1.2083, X40Cr14, STAVAX ESU) is a common mold die material for optical replication processes.Results of the accomplished investigations show the potential of the ultrasonic assisted process and recent developments. By increasing the frequency from 40 kHz to 60 kHz the overall process stability is increased. This makes the process less vulnerable towards feed rate variation or towards the variation of machined material hardness. Furthermore no tool wear is detected at high material removal rates or high cutting dista nces during component machining.

: http://publica.fraunhofer.de/documents/N-171897.html