Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Surface characterization techniques for determining the root-mean-square roughness and power spectral densities of optical components

 
: Duparre, A.; Ferre-Borrull, J.; Gliech, S.; Notni, G.; Steinert, J.; Bennett, J.M.

:

Applied optics 41 (2002), No.1, pp.154-171
ISSN: 0003-6935
ISSN: 1539-4522
ISSN: 1559-128X
English
Journal Article
Fraunhofer IOF ()
surface characterization technique; root-mean-square roughness; power spectral density; optical component; light scattering; surface topography; atomic force microscope; mechanical profiler; optical profiler; Confocal laserscanning microscopy; angle resolved scattering; total scattering; ground fused silica; silicon carbide; sapphire; electroplated gold; diamond-turned brass; measurement instrument; surface spatial wavelength band limit; power spectral density; rms roughnesses; integrating area; surface topographical feature; Au; SiC

Abstract
Surface topography and light scattering were measured on 15 samples ranging from those having smooth surfaces to others with ground surfaces. The measurement techniques included an atomic force microscope, mechanical and optical profilers, confocal laser scanning microscope, angle-resolved scattering, and total scattering. The samples included polished and ground fused silica, silicon carbide, sapphire, electroplated gold, and diamond-turned brass. The measurement instruments and techniques had different surface spatial wavelength band limits, so the measured roughnesses were not directly comparable. Two- dimensional power spectral density (PSD) functions were calculated from the digitized measurement data, and we obtained rms roughnesses by integrating areas under the PSD curves between fixed upper and lower band limits. In this way, roughnesses measured with different instruments and techniques could be directly compared. Although smaller differences between measurement techniques remained in the calculated roughnesses, these could be explained mostly by surface topographical features such as isolated particles that affected the instruments in different ways.

: http://publica.fraunhofer.de/documents/N-16982.html