Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

High aspect ratio front contacts by single step dispensing of metal pastes

 
: Specht, J.; Zengerle, K.; Pospischil, M.; Erath, D.; Haunschild, J.; Clement, F.; Biro, D.

:
Fulltext urn:nbn:de:0011-n-1592431 (442 KByte PDF)
MD5 Fingerprint: f2f9225bddf4489de09dd98f368a1e0d
Created on: 4.8.2012


European Commission:
25th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2010. Proceedings : 5th World Conference on Photovoltaic Energy Conversion, 6-10 , September 2010, Valencia, Spain
München: WIP-Renewable Energies, 2010
ISBN: 3-936338-26-4
pp.1867-1870
European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <25, 2010, Valencia>
World Conference on Photovoltaic Energy Conversion <5, 2010, Valencia>
English
Conference Paper, Electronic Publication
Fraunhofer ISE ()

Abstract
A dispensing process was developed, allowing for a single step, contactless front side metallization of silicon solar cells. Compared to screen printing, the dispensed fingers showed superior geometry, with line widths down to 65µm across the whole wafer area and aspect ratios (height:width) of up to 0.5. Silicon solar cells were produced using both multi- and monocrystalline (cz) material. The efficiency gain on industrial solar cells was 0.6% absolute on multicrystalline material and 0.4% absolute on monocrystalline material, comparing the best dispensed cell with the best screen-printed cell. The average efficiency gain of the two groups was 0.3% (mc) and 0.2% (cz).

: http://publica.fraunhofer.de/documents/N-159243.html