Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Beam shaping - the key to high throughput selective emitter laser processing with a single laser system

 
: Jäger, U.; Oesterlin, P.; Kimmerle, A.; Preu, R.

:
Fulltext urn:nbn:de:0011-n-1564207 (275 KByte PDF)
MD5 Fingerprint: 10284755f4090664b5296a76427461b6
Created on: 3.8.2012


Institute of Electrical and Electronics Engineers -IEEE-; IEEE Electron Devices Society:
35th IEEE Photovoltaic Specialists Conference, PVSC 2010. Vol.2 : Honolulu, Hawaii, USA, 20 - 25 June 2010
Piscataway/NJ: IEEE, 2010
ISBN: 978-1-4244-5890-5
ISBN: 978-1-4244-5891-2
ISBN: 978-1-4244-5892-9
pp.1401-1405
Photovoltaic Specialists Conference (PVSC) <35, 2010, Honolulu/Hawaii>
English
Conference Paper, Electronic Publication
Fraunhofer ISE ()
PV Produktionstechnologie und Qualitätssicherung; Silicium-Photovoltaik; Solarthermie; Herstellung und Analyse von hocheffizienten Solarzellen; Messtechnik und Produktionskontrolle; Technologiebewertung

Abstract
The fabrication of selective emitters by laser processing has attracted the interest of researchers in recent years. However, narrow foci of Gaussian laser beams limit the throughput and feature an inhomogeneous intensity distribution on the wafer. The use of beam shaping can eliminate this setback. A single laser system delivering <;70 Watt to the wafer is already sufficient to achieve short processing times per wafer. The feasibility of a laser system for a selective laser doping process from PSG is investigated and the potential of eligible beam shaping is assessed. Adequate sheet resistances with a good homogeneity and process stability can be achieved, with minor impact to random pyramid surfaces and no measureable degradation of the material. A diffractive optical element splitting one laser into 10 spots of equal intensity is evaluated and fast processing times are achieved.

: http://publica.fraunhofer.de/documents/N-156420.html