Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

In-situ investigation of the surface-topography during anodic dissolution of copper under near-ECM conditions

 
: Schneider, M.; Schroth, S.; Schubert, N.; Michaelis, A.

:

Materials and corrosion 63 (2012), No.2, pp.96-104
ISSN: 0947-5117
ISSN: 0043-2822
ISSN: 1521-4176
English
Journal Article
Fraunhofer IKTS ()

Abstract
Electrochemical machining is characterized by deliberate high speed anodic dissolution. The distance between anode and cathode are only a few hundred microns. Additionally, the electrolyte flow rate is in the range of approximately meter/second. A special electrochemical cell design was developed to investigate the surface topography during the anodic dissolution simultaneously and in-situ under near-ECM conditions. The anode was directly placed under the cathode with a gap of 350 µm. We carried out pulse experiments at 15 A/cm2 and 25 A/cm2 with an electrolyte flow rate of 4m/s. First-time it was possible to observe the surface changing of the anode directly during current pulses by using a video camera. Different stages e.g. roughening, film formation or gas evolution could be distinguished.

: http://publica.fraunhofer.de/documents/N-151821.html