Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Micro turning with closed electrolytic free jet

 
: Hackert, M.; Meichsner, G.; Zinecker, M.; Schubert, A.

:
Preprint urn:nbn:de:0011-n-1456670 (4.6 MByte PDF)
MD5 Fingerprint: 91e97446890da09530089c62daa3d1ce
Created on: 16.2.2011


Deconinck, J. ; Vrije Universiteit Brussel, Faculty of Engineering:
6th International Symposium on Electrochemical Machining Technology, INSECT 2010 : Vrije Universiteit Brussel, 4.-5. November 2010
Brussel: Brussel University Press, 2010
ISBN: 978-90-5487-818-6
pp.97-103
International Symposium on Electrochemical Machining Technology (INSECT) <6, 2010, Brüssel>
English
Conference Paper, Electronic Publication
Fraunhofer IWU ()
micro turning; JET-ECM; closed electrolytic free jet; electrochemical machining (ECM); anodic dissolution; Mikrodrehen; geschlossener elektrolytischer Freistrahl; elektrochemische Metallbearbeitung (ECM); anodische Auflösung

Abstract
The Electrochemical Machining (ECM) with a closed electrolytic free jet (Jet-ECM) is an innovative micro manufacturing technology. Based on anodic dissolution micro structured surfaces and complex three-dimensional geometries can be machined. In comparison to other EC methods the main advantage is the restriction of the electric current to a limited area by the jet. In this study the application of Jet-ECM for the machining of rotating work pieces is investigated. Therefore a Jet-EC Turning prototype system was developed and realized. In addition, different turning procedures were investigated in experiments, to verify the functionality of micro turning with Jet-ECM.

: http://publica.fraunhofer.de/documents/N-145667.html