Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

A new Method for Detection of Degradation in Die-Attach Materials by In-Situ Monitoring of Thermal Properties

 
: Mazloum Nejadari, S.A.; Wittler, O.; Michel, B.

Michel, B.; Lang, K.-D.:
Smart Systems Integration and Reliability. Honorary Volume on the Occasion of Herbert Reichl's 65th Birthday
Dresden: ddp Goldenbogen, 2010
ISBN: 978-3-932434-77-8
pp.712-722
English
Book Article
Fraunhofer IZM ()

Abstract
There are many methods of detecting degradation in die-attach materials, e.g. SAM, X-ray, SEM etc. However, these methods are mainly used in offline testing and therefore involve a great amount of time and effort. The method, we present in this work, is non-destructive and enables in-situ monitoring of degradation. Voids or cracks cause the change of thermal behaviour in electronic packages, therefore the thermal behaviour is due to alter over lifetime. Therefore parametric simulation models have been developed, which enable the prediction of influence of delamination areas on transient thermal properties for different die attach materials. The simulation on example COB (chip-on-board) packages show, that an increase of delamination area causes a significant increase of transient thermal resistance. The computational results are validated with experimental measurements, which show a practical feasibility of the proposed method.

: http://publica.fraunhofer.de/documents/N-143408.html