Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Results of robot machining with additional 3D-piezo-acutation-mechanism for error compensation

 
: Puzik, Arnold; Meyer, Christian; Verl, Alexander

Univ. of Naples; International Academy for Production Engineering -CIRP-, Paris:
CIRP ICME 2010, 7th CIRP International Conference on Intelligent Computation in Manufacturing Engineering. Innovative and Cognitive Production Technology and Systems : 23 - 25 June 2010, Capri (Gulf of Naples), Italy
Capri, 2010
6 pp.
International Conference on Intelligent Computation in Manufacturing Engineering (ICME) <7, 2010, Capri>
English
Conference Paper
Fraunhofer IPA ()
3-D-Piezo-Compensation-Mechanism (3-D-PCM); Piezo-Aktoren; aktive Schwingungsdämpfung; handling; Finite Elemente Analyse; Industrieroboter; Führung; Bewegung von Werkzeug; Werkstück; Positioniergenauigkeit; Werkzeugmaschine; Maschinenschwingung

Abstract
This paper introduces a new and innovative method for machining with an industrial robot. Today, tasks for a typical robot application are simple handling jobs such as pick-and-place from place A to B. For such pick-and-place operations the robot's repeatability is good enough. Nevertheless, complex, flexible and precise handling systems are required. Specifically the market for tasks of dynamically processing, e.g. machining with robots has been growing recently. So the idea is to use the robot for those tasks since conventional metal cutting machine tools are higher in price and more inflexible compared to robot applications. Thus, this article describes the development of a 3-D-Piezo-Compensation-Mechanism (3-D-PCM) due to the idea of online error compensation, [12]. Aspects and rules related to the design of an actuation mechanism based on elastic solid-state joints (ESSJ) are presented. The results of the iteratively finite element analysis (FEA) and designing are following along with its static and dynamic results. Finally, the manufactured and on a test-bed installed 3-D-PCM will be shown. The beneficiaries of this robot machining concept will be presented finally by showing first machined work-pieces and measured results of those, respectively.

: http://publica.fraunhofer.de/documents/N-141635.html