Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Determination of the overall equipment effectiveness for assembly systems on the base of product data

 
: Neugebauer, Reimund; Kreppenhofer, D.; Langer, T.

:
Fulltext urn:nbn:de:0011-n-1323382 (224 KByte PDF)
MD5 Fingerprint: d9dab23de767c88f18b211b5e4db4c19
Created on: 6.4.2011


Sihn, W.; Kuhlang, P.; Westkämper, E. ; International Institution for Production Engineering Research -CIRP-, Paris; Fraunhofer Austria Research GmbH, Wien; TU Wien, Institute of Management Science, Division Production Engineering and System Planning:
Sustainable production and logistics in global networks : 43rd CIRP International Conference on Manufactoring Systems. 26 - 28th May 2010, Vienna, Proceedings
Wien: Neuer Wissenschaftlicher Verlag, 2010
ISBN: 978-3-7083-0686-5
pp.991-998
International Conference on Manufacturing Systems (ICMS) <43, 2010, Wien>
English
Conference Paper, Electronic Publication
Fraunhofer IWU ()
Verfügbarkeit; Datenerfassung; Produktdaten; Montageanlagen; Montage; Rückverfolgbarkeit; Gesamtanlageneffektivität; availability; data acquisition; product data; assembly system; traceability; overall equipment effectiveness; OEE

Abstract
To enable traceability of faulty products it is necessary that product data, including the important parameters of the manufacturing process, be stored for the long-term. This product-related process and quality data usually amounts to very large quantities while at the same time it is only rarely used. Furthermore, for an increasingly large number of production systems designed for mass production, the Overall Equipment Effectiveness (OEE) is being applied as a standard for measuring their productivity. By incorporating the factors availability, quality rate and performance rate, the OEE represents a better measure for the efficiency of a production facility than just the availability. This paper deals with a new approach for a process-accompanying determination of the OEE for assembly systems based on the usage of in-process acquired product data. Thus, this approach is especially suitable for production systems that require complete traceability for the produced goods.

: http://publica.fraunhofer.de/documents/N-132338.html