Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Three-view-concept for modeling process or manufacturing plants with AutomationML

 
: Schleipen, Miriam; Drath, R.

:
Postprint urn:nbn:de:0011-n-1059817 (878 KByte PDF)
MD5 Fingerprint: b0ebea0799fcd05ca6a9958eb088d0d8
© 2009 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Created on: 12.2.2010


Grau, A. ; Institute of Electrical and Electronics Engineers -IEEE-:
14th IEEE International Conference on Emerging Technologies and Factory Automation 2009. Proceedings : 22 - 26 September 2009, Palma de Mallorca
Piscataway, NJ: IEEE, 2009
ISBN: 978-1-4244-2728-4
ISBN: 978-1-4244-2727-7
pp.1519-1522
International Conference on Emerging Technologies and Factory Automation (ETFA) <14, 2009, Palma de Mallorca>
English
Conference Paper, Electronic Publication
Fraunhofer IITB ( IOSB) ()

Abstract
AutomationML (Automation Markup Language) is an XML based data format for the exchange of plant engineering information. Its mission is to interconnect engineering tools of different disciplines, e.g. process, mechanical or control engineering. AutomationML enables the vendor independent storage of interlinked engineering data that is usually distributed into different engineering tools. This enables a wide range of future tool functionality not available and not possible today. For this, AutomationML defines a number of extended concepts for different engineering aspects. One of them is the process-resource-product concept which was introduced with version 1.1 and published at the Hannover trade fair 2009. This paper explains this concept by means of an industrial example.

: http://publica.fraunhofer.de/documents/N-105981.html