Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Sheet metal forming of piezoceramic-metal-laminar structures - simulation and experimental analysis

 
: Drossel, W.-G.; Hensel, S.; Kranz, B.; Nestler, M.; Göschel, A.

:
Postprint urn:nbn:de:0011-n-1005882 (355 KByte PDF)
MD5 Fingerprint: 055f8d50008c49e8adbcd1db2b29fdd1
Created on: 7.6.2011


International Institution for Production Engineering Research -CIRP-, Paris:
59th general assembly of CIRP 2009 = 59ème assemblée générale du CIRP = 59. Mitgliederversammlung des CIRP : Boston, USA, August 23 - 29, 2009
Amsterdam: Elsevier, 2009 (CIRP annals 58.2009, Nr.1)
ISSN: 0007-8506
pp.279-282
International Institution for Production Engineering Research (General Assembly) <59, 2009, Boston/Mass.>
College International pour la Recherche en Productique (Assemblée Générale) <59, 2009, Boston/Mass.>
Internationale Akademie für Produktionstechnik (Mitgliederversammlung) <59, 2009, Boston/Mass.>
English
Conference Paper, Journal Article, Electronic Publication
Fraunhofer IWU ()
sheet metal; forming; piezoceramic-metal-laminar structure

Abstract
Adaptive systems with piezoelectric components offer significant opportunities for the active control of dynamic behaviour. Vibration and acoustics control as well as structural health monitoring are also possible. However ineffective production technologies prevent industrial applications. The authors are therefore proposing the integration of piezo-modules inside a double-layer sheet. The use of semi-cured adhesive avoids shear-forces being transferred to the piezo-modules during forming. After forming the adhesive will cure and the transfer of piezoelectric strain to the sheet is made possible. A detailed finiteelement-model incorporating the electro-mechanical characteristics of the piezo-modules has been developed. The simulation results were validated experimentally.

: http://publica.fraunhofer.de/documents/N-100588.html