Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Progress in gray-tone lithography and replication techniques for different materials

 

Lee, S.H. ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
Micromachine Technology for Diffractive and Holographic Optics
Bellingham, Wash.: SPIE, 1999 (SPIE Proceedings Series 3879)
ISBN: 0-8194-3476-0
pp.98-105
Conference on Micromachine Technology for Diffractive and Holographic Optics <1999, Santa Clara/Calif.>
English
Conference Paper
Fraunhofer ISIT ()

Abstract
The fabrication of 3D-microstructures with well-defined curved surface contours is of great importance for various mechanical, optical and electronic devices and subsystems. Complex geometrical structures or topographies are necessary to obtain a certain mechanical stability, a specific surface property or a predetermined electrostatic field configuration. Obviously in the micro-optic domain, there is a great demand to produce sophisticated surface topographies for refractive or diffractive optical elements, e.g. Fresnel lenses. This paper reports on progress in graytone lithography using subresolution pixeled chromium glass masks and introduces some replication techniques for different materials. In continuation of our work on graytone lithography, reported elsewhere, detailed view on reproducibility, fidelity and process latitude will be presented. Based on this results infrared diffractive optical elements have been fabricated in silicon using an 1:1 dry etching process, where the surface roughness of the shaped areas after etching has an 1 (sigma) value of 18 nm. For low cost application in the visible wavelength region a replication technique in polycarbonat by injection modeling is described. First results are shown.

: http://publica.fraunhofer.de/documents/B-60829.html