| | |
|---|
| 2020 | Automated Tool‐Path Generation for Rapid Manufacturing of Additive Manufacturing Directed Energy Deposition Geometries
Biegler, M.; Wang, J.; Kaiser, L.; Rethmeier, M. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2020 | Avoidance of end crater imperfections at high-power laser beam welding of closed circumferential welds
Gook, S.; Ömer, Ü.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2020 | Avoidance of liquid metal embrittlement during resistance spot welding by heat input dependent hold time adaption
Böhne, C.; Meschut, G.; Biegler, M.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2020 | Distortion-based validation of the heat treatment simulation of Directed Energy Deposition additive manufactured parts
El-Sari, B.; Biegler, M.; Graf, B.; Rethmeier, M. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2020 | Experimental and numerical study on the influence of the laser hybrid parameters in partial penetration welding on the solidification cracking in the weld root
Bakir, N.; Üstündağ, Ö.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2020 | Geometric distortion-compensation via transient numerical simulation for directed energy deposition additive manufacturing
Biegler, M.; Elsner, B.A.M.; Graf, B.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2020 | Hybrid laser arc welding of thick high-strength pipeline steels of grade X120 with adapted heat input
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2020 | Hybrid laser-arc welding of thick-walled pipe segments with optimization of the end crater
Üstündağ, Ö.; Gook, S.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2020 | Influence of electron beam welding parameters on the weld seam geometry of Inconel 718 at low feed rates
Raute, Julius; Jokisch, Torsten; Marko, Angelina; Biegler, Max; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2020 | Mechanical Properties Characterization of Welded Automotive Steels
Javaheri, E.; Lubritz, J.; Graf, B.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2020 | Neueste Entwicklungen im Bereich des Hochleistungslaserstrahl- und Hybridschweißens von hohen Blechdicken
Üstündag, Ömer; Bakir, Nasim; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2020 | Notch impact toughness of laser beam welded thick sheets of cryogenic nickel alloyed steel X8Ni9
Gook, S.; Krieger, S.; Gumenyuk, A.; El-Batahgy, A.M.; Rethmeier, M. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2020 | Prevention of liquid metal embrittlement cracks in resistance spot welds by adaption of electrode geometry
Böhne, Christoph; Meschut, Gerson; Biegler, Max; Frei, Julian; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2020 | Qualification of computational welding mechanics approaches for simulation of directed energy deposition
Biegler, Max Robert
: Rethmeier, Michael | Dissertation |
| 2020 | Quantifying mechanical properties of automotive steels with deep learning based computer vision algorithms
Javaheri, E.; Kumala, V.; Javaheri, A.; Rawassizadeh, R.; Lubritz, J.; Graf, B.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2019 | Assessment of thermal cycles by combining thermo-fluid dynamics and heat conduction in keyhole mode welding processes
Artinov, A.; Karkhin, V.; Khomich, P.; Bachmann, M.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2019 | Automated tool-path generation for rapid manufacturing and numerical simulation of additive manufacturing LMD geometries
Biegler, Max; Wang, Jiahan; Graf, Benjamin; Rethmeier, Michael | Konferenzbeitrag |
| 2019 | Automatically welded tubular X-joiuts
Schaumann, P.; Schürmann, K.; Pirtner, A.; Rethmeier, M. | Konferenzbeitrag |
| 2019 | Avoidance of End Crater Imperfections at High-Power Laser Beam Welding of Closed Circumferential Welds
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael | Vortrag |
| 2019 | Development of a novel optical measurement technique to investigate the hot cracking susceptibility during laser beam welding
Bakir, N.; Pavlov, V.; Zavjalov, S.; Volvenko, S.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2019 | Experimental and numerical assessment of weld pool behavior and final microstructure in wire feed laser beam welding with electromagnetic stirring
Meng, X.; Bachmann, M.; Artinov, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2019 | Heat treatment of SLM-LMD hybrid components
Uhlmann, Eckart; Düchting, Jan; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael | Konferenzbeitrag |
| 2019 | Highspeed-Plasma-Laser-Cladding (HPLC) als hybrides Beschichtungsverfahren: Evaluierung des Einsatzpotentials für hohe Prozessgeschwindigkeiten
Brunner-Schwer, Christian; Schreiber, Frank; Graf, Benjamin; Rethmeier, Michael | Konferenzbeitrag |
| 2019 | Highspeed-plasma-laser-cladding of thin wear resistance coatings: A process approach as a hybrid metal deposition-technology
Brunner-Schwer, Christian; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2019 | Hybrid laser arc welding of thick plates X8Ni9 for LNG tank construction
Gook, Sergej; El-Batahgy, A-M.; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2019 | Improvement of filler wire dilution using external oscillating magnetic field at full penetration hybrid laser-arc welding of thick materials
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2019 | Improvement of numerical simulation model setup and calculation time in additive manufacturing-laser-metal-deposition components with an advanced modelling strategy
Biegler, Max; Khazan, Pavel; Gatzen, Marius; Rethmeier, Michael | Konferenzbeitrag |
| 2019 | Investigation of liquid metal embrittlement of dual phase steel joints by electro-thermomechanical spot-welding simulation
Frei, Julian; Biegler, Max; Rethmeier, Michael; Böhne, Christoph; Meschut, Gerson | Zeitschriftenaufsatz |
| 2019 | Investigation of the mechanical properties of single-pass hybrid laser-arc welded thick X120 pipeline steel plates
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2019 | Laser Welding of SLM-Manufactured Tubes Made of IN625 and IN718
Jokisch, Torsten; Marko, Angelina; Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2019 | Laserhybridschweißen von dickwandigen Stählen mit elektromagnetischer Schmelzbadunterstützung
Gumenyuk, Andrey; Üstündag, Ömer; Gook, Sergej; Rethmeier, Michael | Konferenzbeitrag |
| 2019 | Liquid Metal Embrittlement of Advanced High Strength Steels during Resistance Spot Welding
Frei, Julian
: Krüger, J.; Rethmeier, M.; Jüttner, S. | Dissertation |
| 2019 | Low heat input gas metal arc welding for dissimilar metal weld overlays part III: Hydrogen-assisted cracking susceptibility
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2019 | Mechanical properties characterization of resistance spot welded DP1000 steel under uniaxial tensile tests
Javaheri, E.; Pittner, A.; Graf, B.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2019 | Mechanical Properties of Single-pass Hybrid Laser Arc Welded 25 mm Thick-walled Structures Made of Fine-grained Structural Steel
Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2019 | Microstructure of Inconel 718 parts with constant mass energy input manufactured with direct energy deposition
Petrat, Torsten; Brunner-Schwer, Christian; Graf, Benjamin; Rethmeier, Michael | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2019 | Numerical and experimental investigation of thermo-fluid flow and element transport in electromagnetic stirring enhanced wire feed laser beam welding
Meng, X.; Artinov, A.; Bachmann, M.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2019 | Numerische Simulation einer AM-Prozesskette im DED Auftragschweißen
El-Sari, Bassel; Biegler, Max; Graf, Benjamin; Rethmeier, Michael | Konferenzbeitrag |
| 2019 | On the search for the origin of the bulge effect in high power laser beam welding
Artinov, A.; Bakir, N.; Bachmann, M.; Gumenyuk, A.; Na, S.-J.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2019 | Ortsabhängiges Verschleißmodell für das Doppelseitenplanschleifen mit Planetenkinematik
List, Michael
: Rethmeier, M.; Uhlmann, E.; Klocke, F. | Dissertation |
| 2019 | Prediction of the initial fatigue crack location of automatically welded tubular joints for jacket support structures
Schaumann, P.; Schürmann, K.; Pittner, A.; Rethmeier, M. | Konferenzbeitrag |
| 2019 | Resistance spot welding under external load for evaluation of LME susceptibility of zinc coated advanced high strength steel sheets
Frei, Julian; Biegler, Max; Rethmeier, Michael | Konferenzbeitrag |
| 2019 | Vermeidung von Schweißimperfektionen im Überlappbereich bei laserstrahlhybrid-geschweißten Rundnähten
Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2018 | 3D laser metal deposition: Process steps for additive manufacturing
Graf, Benjamin; Marko, Angelina; Petrat, Torsten; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2018 | Assessing the predictive capability of numerical additive manufacturing simulations via in-situ distortion measurements on a LMD component during build-up
Biegler, Max; Graf, Benjamin; Rethmeier, Michael | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Automatisierte Fertigung von Hohlprofilknoten für Jacket-Gründungsstrukturen
Schaumann, P.; Rethmeier, M.; Schürmann, K.; Pittner, A.; Dänekas, C.; Schippereit, C. | Zeitschriftenaufsatz |
| 2018 | Build-up strategies for additive manufacturing of three dimensional Ti-6Al-4V-parts produced by laser metal deposition
Spranger, Felix; Graf, Benjamin; Schuch, Michael; Hilgenberg, Kai; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2018 | Build-up strategies for laser metal deposition in additive manufacturing
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2018 | Build-up strategies for temperature control using laser metal deposition for additive manufacturing
Petrat, Torsten; Winterkorn, René; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2018 | Comparison between GTA and laser beam welding of 9% Ni steel for critical cryogenic applications
El-Batahgy, A-M.; Gumenyuk, A.; Gook, S.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2018 | Design of neural network arc sensor for gap width detection in automated narrow gap GMAW
Fabry, C.; Pittner, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2018 | Effect of laser-beam and hybrid-laser-arc welding parameters and filler metal on microstructure and mechanical properties of thick heat-treated steel X8Ni9+QT640 for cryogenic service
El-Batahgy, A-M.; Gook, S.; Gumenyuk, A.; Rethmeier, M. | Konferenzbeitrag |
| 2018 | Embedding electronics into additive manufactured components using laser metal deposition and selective laser melting
Petrat, Torsten; Kersting, Robert; Graf, Benjamin; Rethmeier, Michael | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Equivalent heat source approach in a 3D transient heat transfer simulation of full-penetration high power laser beam welding of thick metal plates
Artinov, A.; Bachmann, M.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2018 | Finite element analysis of in-situ distortion and bulging for an arbitrarily curved additive manufacturing directed energy deposition geometry
Biegler, Max; Marko, Angelina; Graf, Benjamin; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2018 | Full penetration hybrid laser arc welding of up to 28 mm thick S355 plates using electromagnetic weld pool support
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2018 | Hybrid laser arc welding of 25 mm thick materials using electromagnetic weld pool support
Üstündag, Ömer; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2018 | Hybrid laser-arc welding of thick-walled ferromagnetic steels with electromagnetic weld pool support
Üstündag, Ömer; Fritzsche, André; Avilov, Vjaceslav; Rethmeier, Michael; Gumenyuk, Andrey | Zeitschriftenaufsatz |
| 2018 | Hybrides Auftragschweißen: Potentiale des laserunterstützten Plasma-Pulver-Auftragschweißens (PTA)
Brunner-Schwer, Christian; Graf, Benjamin; Rethmeier, Michael; Schreiber, Frank | Konferenzbeitrag |
| 2018 | Improved degassing in laser beam welding of aluminum die casting by an electromagnetic field
Fritzsche, A.; Hilgenberg, K.; Teichmann, F.; Pries, H.; Dilger, K.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2018 | In-situ distortions in LMD additive manufacturing walls can be measured with digital image correlation and predicted using numerical simulations
Biegler, Max; Graf, Benjamin; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2018 | Influence of heat input and preheating on the cooling rate, microstructure and mechanical properties at the hybrid laser-arc welding of API 5L X80 steel
Turichin, G.; Kuznetsov, M.; Pozdnyakov, A.; Gook, S.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Investigation of solidification cracking susceptibility during laser beam welding using an in-situ observation technique
Bakir, N.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2018 | Laser beam oscillation welding for automotive applications
Müller, A.; Goecke, S.F.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2018 | Laser-plasma-cladding as a hybrid metal deposition-technology applying a SLM-produced copper plasma nozzle
Brunner-Schwer, Christian; Kersting, Robert; Graf, Benjamin; Rethmeier, Michael | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Laser-Pulver-Auftragschweißen in der additiven Prozesskette für Legierungen aus dem Turbomaschinenbau
Graf, Benjamin
: Uhlmann, E.; Rethmeier, Michael; Schmidt, M. | Dissertation |
| 2018 | Low heat input gas metal arc welding for dissimilar metal weld overlays part II: The transition zone
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2018 | Methodik zur integrierten virtuellen Auslegung und Absicherung flexibler Bauteile
Hofheinz, Nicolas
: Rethmeier, Michael; Stark, Rainer; Wartzack, Sandro; Schwenk, C. | Dissertation |
| 2018 | Novel metrology to determine the critical strain conditions required for solidification cracking during laser welding of thin sheets
Bakir, N.; Pavlov, V.; Zavjalov, S.; Volvenko, S.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Numerical simulation of the weld pool dynamics during pulsed laser welding using adapted heat source models
Lange, F.; Artinov, A.; Bachmann, M.; Rethmeier, M.; Hilgenberg, K. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | Numerical simulation on the origin of solidification cracking in laser welded thick-walled structures
Bakir, N.; Artinov, A.; Gumenyuk, A.; Bachmann, M.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2018 | Numerische Prozesssimulation zur Auslegung des Druckfließläppens am Beispiel additiv gefertigter Bauteile
Schmiedel, Christian
: Rethmeier, Michael; Uhlmann, Eckart; Abele, Eberhard | Dissertation |
| 2018 | Orbital hybrid laser arc welding using a high power fibre laser for pipeline construction
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2018 | Porosity of LMD manufactured parts analyzed by Archmimedes method and CT
Marko, Angelina; Raute, Julius; Linaschke, Dorit; Graf, Benjamin; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2018 | Prognose der Oberflächenbeschaffenheit für die additive Fertigung mittels Laser-Pulver-Auftragschweißen
Marko, Angelina; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael | Konferenzbeitrag |
| 2018 | Strain-rate controlled Gleeble experiments to determine the stress-strain behavior of HSLA steel S960QL
Neubert, S.; Pittner, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2018 | Study of gap and misalignment tolerances at hybrid laser arc welding of thick-walled steel with electromagnetic weld pool support system
Üstündag, Ömer; Fritzsche, André; Avilov, Vjaceslav; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2018 | A study on shielded metal arc welding of 9%Ni steel using non-conventional ferritic welding electrode for LNG facilities
Siayah, A.; El-Batahgy, A-M.; Khafagi, S.; Gumenyuk, A.; Gook, S.; Rethmeier, M. | Konferenzbeitrag |
| 2018 | Study on the role of recondensation flux in high power laser welding by computational fluid dynamics simulations
Muhammad, S.; Han, S.-W.; Na, S.-J.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2018 | Susceptibility of electrolytically galvanized dual-phase steel sheets to liquid metal embrittlement during resistance spot welding
Frei, Julian; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2018 | Vorgehensweise zur Auslegung des Laserstrahlschmelzens am Beispiel von Wolframkarbid-Kobalt
Bergmann, André
: Rethmeier, Michael; Uhlmann, Eckart; Schmidt, Michael | Dissertation |
| 2018 | Weld pool shape observation in high power laser beam welding
Artinov, A.; Bakir, N.; Bachmann, M.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2017 | 3D laser metal deposition in an additive manufacturing process chain
Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Abstract |
| 2017 | Application of D-optimum experimental designs in consideration of restrictions for laser metal deposition
Marko, Angelina; Graf, Benjamin; Gook, Sergej; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2017 | Assessing carbon dioxide emission reduction potentials of improved manufacturing processes using multiregional input output frameworks
Ward, H.; Burger, M.; Chang, Y.-J.; Fürstmann, P.; Neugebauer, S.; Radebach, A.; Sproesser, G.; Pittner, A.; Rethmeier, M.; Uhlmann, E.; Steckel, J.C. | Zeitschriftenaufsatz |
| 2017 | Charakterisierung des Bruch- und Festigkeitsverhaltens von widerstandspunktgeschweißten Aluminiumverbindungen
Meschut, Gerson; Janzen, Vitalij; Rethmeier, Michael; Gumenyuk, Andrey; Frei, Julian | Zeitschriftenaufsatz |
| 2017 | Energy efficiency and environmental impacts of high power gas metal arc welding
Sproesser, G.; Chang, Y.-J.; Pittner, A.; Finkbeiner, M.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2017 | Entwicklung eines Verfahrens zur Bestimmung der Rissanfälligkeit von hochfesten Stählen beim Widerstandspunktschweißen
Rethmeier, Michael; Suwala, Hubert; Frei, Julian
: Salomon, Rainer (Hrsg.) | Bericht |
| 2017 | Environmental energy efficiency of single wire and tandem gas metal arc welding
Sproesser, G.; Chang, Y.-J.; Pittner, A.; Finkbeiner, M.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2017 | EWM and DVS presented EWM Award for augmented reality assistance system for welding
Rethmeier, M.; Stöckl, R.; Atzberger, A. | Zeitschriftenaufsatz |
| 2017 | Hybrid laser arc welding of X80 and X120 steel grade
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2017 | Influence of non-uniform martensitic transformation on residual stresses and distortion of GMA-welding
Neubert, S.; Pittner, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2017 | Numerical simulation of thermally induced residual stresses in friction stir welding of aluminum alloy 2024-T3 at different welding speeds
Bachmann, M.; Carstensen, J.; Bergmann, L.; dos Santos, J.F.; Wu, C.S.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2017 | Overview and new developments in research on resistance spot welding of advanced high strength steels
Frei, Julian; Rethmeier, Michael | Konferenzbeitrag |
| 2017 | Statistische Analyse der Schweißraupengeometrie von Ti6Al4V beim Laserbeschichten
Marko, Angelina; Graf, Benjamin; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2017 | Surface structuring by pulsed laser implantation
Hilgenberg, K.; Rethmeier, M.; Steinhoff, K. | Zeitschriftenaufsatz |
| 2017 | Temperature generation of different travel path strategies to build layers using Laser Metal Deposition
Petrat, Torsten; Graf, Benjamin; Winterkorn, René; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2017 | Trockeneisstrahlen als Vorbehandlungsverfahren vor dem Galvanisieren
Baira, El Mustapha
: Uhlmann, E.; Jochem, R.; Kohl, H.; Krüger, J.; Rethmeier, M.; Seliger, G.; Stark, R. | Dissertation |
| 2017 | Umweltbewertung und Ökoeffizienz beim Metall-Schutzgasschweißen von Dickblechverbindungen
Sproesser, Gunther
: Rethmeier, Michael | Dissertation |
| 2017 | Vorhersage zur Bauteilmaßhaltigkeit bei der additiven Fertigung mittels Schweißstruktursimulation
Biegler, Max; Rethmeier, Michael | Konferenzbeitrag |
| 2016 | Bestimmung der Rissanfälligkeit von hochfesten Stählen beim Widerstandspunktschweißen
Frei, Julian; Suwala, Hubert; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2016 | CO2-Schneeentstehung und deren Wirkung auf die Effekte beim CO2-Schneestrahlen
Kretzschmar, Michael
: Rethmeier, M.; Uhlmann, Eckart; Weidner, E. | Dissertation |
| 2016 | Combined laser additive manufacturing for complex turbine blades
Graf, Benjamin; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2016 | Combined laser additive manufacturing with powderbed and powder nozzle for turbine parts
Graf, Benjamin; Schuch, Michael; Petrat, Torsten; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2016 | Experimental determination of TRIP-parameter K for mild- and high-strength low-alloy steels and a super martensitic filler material
Neubert, S.; Pittner, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2016 | Finite element modeling of an alternating current electromagnetic weld pool support in full penetration laser beam welding of thick duplex stainless steel plates
Bachmann, M.; Kunze, R.; Avilov, V.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2016 | Full penetration laser beam welding of thick duplex steel plates with electromagnetic weld pool support
Avilov, V.; Fritzsche, A.; Bachmann, M.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2016 | High Power Laser Beam Welding of Thick-walled Ferromagnetic Steels with Electromagnetic Weld Pool Support
Fritzsche, A.; Avilov, V.; Gumenyuk, A.; Hilgenberg, K.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2016 | Increasing Performance and Energy Efficiency of Gas Metal Arc Welding by a High Power Tandem Process
Sproesser, G.; Pittner, A.; Rethmeier, M. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | Laser based spot weld characterization
Jonietz, Florian; Myrach, Philipp; Rethmeier, Michael; Suwala, Hubert; Ziegler, Mathias | Konferenzbeitrag |
| 2016 | Laser beam weldability of high-manganese austenitic and duplex stainless steel sheets
Quiroz, V.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2016 | Laser metal deposition as repair technology for a gas turbine burner made of Inconel 718
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | Low heat input gas metal arc welding for dissimilar metal weld overlays part I: The heat-affected zone
Frei, Julian; Alexandrov, Boian T.; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2016 | Numerical assessment and experimental verification of the influence of the Hartmann effect in laser beam welding processes by steady magnetic fields
Bachmann, M.; Avilov, V.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2016 | Numerical sensitivity analysis of TRIP-parameter K on weld residual stresses for steel S355J2+ N
Neubert, S.; Pittner, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2016 | Numerical simulation of solidification crack formation during laser beam welding of austenitic stainless steels under external load
Bakir, N.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2016 | Sensitivity analysis of the residual stress state in friction stir welding of high strength aluminum alloy
Bachmann, M.; Rethmeier, M.; Wu, C.S. | Zeitschriftenaufsatz |
| 2016 | Strategien zur Erreichung eines konstanten Volumenaufbaus bei der additiven Fertigung mittels Laser-Pulver-Auftragschweißen
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2016 | Sustainable Welding Process Selection Based on Weight Space Partitions
Sproesser, G.; Schenker, S.; Pittner, A.; Borndörfer, R.; Rethmeier, M.; Chang, Y.-J.; Finkbeiner, M. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2016 | Welding with high-power lasers: Trends and developments
Bachmann, M.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2015 | Additive process chain using selective laser melting and laser metal deposition
Graf, Benjamin; Schuch, Michael; Kersting, Robert; Gumenyuk, Andrey; Rethmeier, Michael | Abstract |
| 2015 | Build-up strategies for generating components of cylindrical shape with laser metal deposition
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Abstract |
| 2015 | Einsatz der Schweißsimulation zur Verzugsoptimierung an Praxisbauteilen
Thater, R.; Pittner, A.; Rethmeier, M. | Konferenzbeitrag |
| 2015 | Environmental and Social Life Cycle Assessment of Welding Technologies
Chang, Y.-J.; Sproesser, G.; Neugebauer, S.; Wolf, K.; Scheumann, R.; Pittner, A.; Rethmeier, M.; Finkbeiner, M. | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2015 | Flexible manufacturing with an additive process chain. Design, production and surface finish
Uhlmann, Eckart; Rethmeier, Michael; Graf, Benjamin; Kersting, Robert; Bergmann, André | Konferenzbeitrag |
| 2015 | Laser and hybrid laser-arc welding of cryogenic 9%Ni steel for construction of LNG storage tanks
Gook, Sergej; Forquer, Matthew; Gumenyuk, Andrey; Rethmeier, Michael; El-Batahgy, Abdel-Monem | Konferenzbeitrag |
| 2015 | Laser-GMA-hybrid welding of longitudinally welded large-diameter pipes of grades API-X80/X100 to increase the toughness and the production efficiency
Rethmeier, Michael; Gumenyuk, Andrey; Gook, Sergej | Konferenzbeitrag |
| 2015 | Laser-Pulver-Auftragschweißen zum additiven Aufbau komplexer Formen
Petrat, Torsten; Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2015 | Laserstrahl-MSG-Hybridschweißen von Rohren aus Hochfestem Stahl API-X80/ -X100
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2015 | Life Cycle Assessment of welding technologies for thick metal plate welds
Sproesser, G.; Chang, Y.-J.; Pittner, A.; Finkbeiner, M.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2015 | Maintenance, repair and overhaul in through-life engineering services
Uhlmann, Eckart; Stark, Rainer; Rethmeier, Michael; Baumgarten, Jeannette; Bilz, Martin; Geister, Claudio; Graf, Benjamin; Gumenyuk, Andrey; Grosser, Hendrik; Heitmüller, Florian; Manthei, Marcel; Reinkober, Sascha | Aufsatz in Buch |
| 2015 | Numerical investigation of energy input characteristics for high-power fiber laser welding at different positions
Sohail, M.; Han, S.-W.; Na, S.-J.; Gumenyuk, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2015 | Numerical modeling for the effect of pin profiles on thermal and material flow characteristics in friction stir welding
Su, H.; Wu, C.S.; Bachmann, M.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2015 | Possibilities for compensating a higher heat input, in particular by the torch offset relative to the top sheet at the fillet weld on a lap joint
Ebert-Spiegel, M.; Goecke, S.-F.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2015 | Reconstruction of 3D transient temperature field for fusion welding processes on basis of discrete experimental data
Pittner, A.; Karkhin, V.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2015 | Study on fatigue behavior of dissimilar materials and different methods of friction-welded joints for drive pinion in trucks
Mohammadzadeh Polami, S.; Häfele, P.; Rethmeier, M.; Schmid, A. | Zeitschriftenaufsatz |
| 2015 | Understanding grain refinement in aluminium welding
Schempp, P.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2015 | Untersuchung von Punktschweißverbindungen mit aktiver Thermografie
Jonietz, Florian; Ziegler, Mathias; Myrach, Philipp; Suwala, Hubert; Rethmeier, Michael | Konferenzbeitrag |
| 2015 | Welding simulation in car body construction - virtual welding sequence planning for remote laser applications
Thater, Raphael; Wiethop, P.; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2014 | Development of a test method for determining the cracking susceptibility of resistance spot welded high strength steel sheets
Rethmeier, Michael; Suwala, Hubert | Konferenzbeitrag |
| 2014 | Grain structure in aluminium TIG welds
Schempp, P.; Pittner, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2014 | Hybrid laser Arc Welding for The Production of Longitudinally Welded Pipes
Gook, S.; Gumenyuk, A.; Rethmeier, M. | Konferenzbeitrag |
| 2014 | Hybrid laser arc welding of X80 and X120 steel grade
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2014 | Influence of weld imperfections on the fatigue behaviour of resistance spot welded advanced high strength steels
Rethmeier, M. | Konferenzbeitrag |
| 2014 | Informationsgehalt des schweißpunktabhängigen Emissionsgrades
Zubert, B.; Hönl, F.; Gühmann, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2014 | Microcrack formation during gas metal arc welding of high-strength fine-grained structural steel
Heinze, C.; Michael, T.; Pittner, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2014 | Schnelle numerische Methoden für die effiziente Temperaturfeldberechnung in bauteilnahen Geometrien und Mehrlagenschweißungen
Schulz, W.; Nießen, M.; Wollschläger, J.; Hansen, U.; Pittner, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2014 | Solidification of GTA aluminum weld metal: Part 1 - Grain morphology dependent upon alloy composition and grain refiner content
Schempp, P.; Cross, C.E.; Pittner, A.; Oder, G.; Neumann, R.S.; Rooch, H.; Dörfel, I.; Österle, W.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2014 | Solidification of GTA aluminum weld metal: Part 2 - Thermal conditions and model for columnar-to-equiaxed transition
Schempp, P.; Cross, C.E.; Pittner, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2014 | Verschleißschutz im Werkzeugbau mittels Laser-Pulver-Auftragschweißen
Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2013 | Additive Prozesskette zur Instandsetzung von Bauteilen
Bergmann, André; Grosser, Hendrik; Graf, Benjamin; Uhlmann, Eckart; Rethmeier, Michael; Stark, Rainer | Zeitschriftenaufsatz |
| 2013 | Dependency of martensite start temperature on prior austenite grain size and its influence on welding-induced residual stresses
Heinze, C.; Pittner, A.; Rethmeier, M.; Babu, S.S. | Zeitschriftenaufsatz |
| 2013 | Design of experiments for laser metal deposition in maintenance, repair and overhaul applications
Graf, Benjamin; Ammer, Stefan; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz, Konferenzbeitrag |
| 2013 | Einfluss von Oberflächenrissen auf die dynamische Festigkeit von Widerstandspunktschweißverbindungen aus hochfestem austenitischen Stahl
Brauser, Stephan; Rethmeier, Michael; Noack, Thomas; Jüttner, Sven | Zeitschriftenaufsatz |
| 2013 | Ersatzteilfertigung und Reparatur mittels additiver Fertigungsverfahren
Uhlmann, E.; König-Urban, K.; Rethmeier, M.; Graf, B. | Konferenzbeitrag |
| 2013 | High power laser beam welding
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2013 | Influence of grain size on mechanical properties of aluminium GTA weld metal
Schempp, P.; Cross, C.E.; Häcker, R.; Pittner, A.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2013 | Influence of imperfections on the fatigue performance of resistance spot welded joints
Brauser, S.; Gebhardt, M.O.; Rethmeier, M. | Konferenzbeitrag |
| 2013 | Laser-hybrid welding for pipe production and pipe laying of thick large diameter pipes
Rethmeier, Michael; Gumenyuk, Andrey; Gook, Sergej | Konferenzbeitrag |
| 2013 | Laser-Pulver-Auftragschweißen als Reparaturverfahren
Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2013 | Laser-Pulver-Auftragsschweißen als Reparaturverfahren
Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Zeitschriftenaufsatz |
| 2013 | Prospects of application of laser-GMA hybrid welding for manufacturing of large diameter longitudinal welded high strength steel pipes
Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2012 | Case study for welding simulation in the automotive industry
Rethmeier, M.; Perret, W.; Thater, R.; Alber, U.; Schwenk, C. | Zeitschriftenaufsatz |
| 2012 | Characterization of microstructure and deformation behaviour of resistance spot welded AZ31 magnesium alloy
Babu, N.K.; Brauser, S.; Rethmeier, M.; Cross, C.E. | Zeitschriftenaufsatz |
| 2012 | Determination of local stress-strain properties of spot welded joints using the instrumented indentation test
Brauser, S.; Subaric-Leitis, A.; Ullner, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2012 | Effect of heat source configuration on the result quality of numerical calculation of welding-induced distortion
Heinze, C.; Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2012 | The effect of tack welding on numerically calculated welding-induced distortion
Heinze, C.; Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2012 | Einfluss von schweißbedingten Rissen auf die Schwingfestigkeit von Widerstandspunktschweißverbindungen aus hochfestem austenitischen Stahl
Brauser, S.; Schwenk, C.; Rethmeier, M.; Noack, T.; Jüttner, S. | Zeitschriftenaufsatz |
| 2012 | Influence of production-related gaps on strength properties and deformation behavior of spot welded TRIP Steel HCT690T
Brauser, S.; Pepke, L.-A.; Weber, G.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2012 | Influence of Ti and B additions on grain size and weldability of aluminium alloy 6082
Schempp, P.; Cross, C.E; Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2012 | Influence of welding-induced cracks on the fatigue strength of resistance-spot-welded joints made of high-strength austenitic steel
Rethmeier, M.; Brauser, S.; Schwenk, C.; Noack, T.; Jüttner, S. | Zeitschriftenaufsatz |
| 2012 | Instrumentierte Eindringprüfung zur Bestimmung lokaler Festigkeitskennwerte an Punktschweißverbindungen
Brauser, S.; Subaric-Leitis, A.; Ullner, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2012 | Laser metal deposition as repair technology for stainless steel and titanium alloys
Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag, Zeitschriftenaufsatz |
| 2012 | Laser metal deposition as repair technology for stainless steel and titanium alloys for petrochemicals industry
Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael | Konferenzbeitrag |
| 2012 | Laser/GMA hybrid welding of thick-walled precision pipes
Gebhardt, M.O.; Gumenyuk, A.; Quiroz, V.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2012 | Numerical calculation of residual stress development of multi-pass gas metal arc welding
Heinze, C.; Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2012 | Numerical calculation of residual stress development of multi-pass gas metal arc welding under high restraint conditions
Heinze, C.; Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2011 | Approach to assess a fast welding simulation in an industrial environment - application for an automotive welded part
Perret, W.; Thater, R.; Alber, U.; Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2011 | Bestimmung lokaler Spannungs-Dehnung-Kurven an Widerstandspunktschweißverbindungen von hochfesten Mehrphasenstählen mittels instrumentierter Eindringprüfung
Subaric-Leitis, A.; Brauser, S.; Ullner, C.; Rethmeier, M. | Konferenzbeitrag |
| 2011 | Case study for welding simulation in the automotive industry
Perret, W.; Thater, R.; Alber, U.; Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2011 | Different modeling approaches for efficient distortion calculation of an automotive assembly
Thater, R.; Perret, W.; Schwenk, C.; Alber, U.; Rethmeier, M. | Konferenzbeitrag |
| 2011 | Efficient welding simulation of an automotive sheet metal assembly
Perret, W.; Thater, R.; Alber, U.; Schwenk, C.; Rethmeier, M. | Konferenzbeitrag |
| 2011 | Fast temperature field generation for welding simulation and reduction of experimental effort
Pittner, A.; Weiss, D.; Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2011 | General standard for welding simulation
Schwenk, C.; Tikhomirov, D.; Eßer, G.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2011 | Influences of mesh density and transformation behavior on the result quality of numerical calculation of welding induced distortion
Heinze, C.; Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2011 | Influences on the result quality of numerical calculation of welding-induced distortion
Heinze, C.; Rethmeier, M.; Schwenk, C. | Konferenzbeitrag |
| 2011 | Material properties for welding simulation - measurement, analysis, and exemplary data
Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2011 | Methods to obtain weld discontinuities in spot-welded joints made of advanced high-strength steels
Gaul, H.; Brauser, S.; Weber, G.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2011 | Numerical sensitivity analysis of welding-induced residual stress depending on variations in continuous cooling transformation behavior
Heinze, C.; Schwenk, C.; Rethmeier, M.; Caron, J. | Zeitschriftenaufsatz |
| 2011 | Optimierung von Verzug und Eigenspannungen beim Schweißen dickwandiger Bauteile
Heinze, C.; Schwenk, C.; Rethmeier, M. | Bericht |
| 2011 | Potential of optical strain field measurement for the characterisation of the properties of resistance-spot-welded joints
Rethmeier, M.; Brauser, S.; Weber, G. | Zeitschriftenaufsatz |
| 2011 | Prediction of weld pool shape and influence of opening angle for new gas metal arc welding processes
Chen, J.; Schwenk, C.; Wu, C.S.; Rethmeier, M. | Konferenzbeitrag |
| 2011 | Simulation of inverse heat conduction problems in fusion welding with extended analytical heat source models
Karkhin, V.A.; Pittner, A.; Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2011 | Simulation of welding
Wu, C.S.; Rethmeier, M.; Schwenk, C. | Zeitschriftenaufsatz |
| 2011 | Simulation of welding temperature field in laser beam welding by inverse techniques
Karkhin, V.A.; Pittner, A.; Schwenk, C.; Rethmeier, M. | Konferenzbeitrag |
| 2011 | Standards and guidelines for numerical welding simulation
Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2011 | Temperature dependent material properties for welding simulation - measurement, analysis, exemplary data
Schwenk, C.; Rethmeier, M. | Zeitschriftenaufsatz |
| 2011 | Weld metal grain refinement of aluminium alloy 5083 through controlled additions of Ti and B
Schempp, P.; Schwenk, C.; Rethmeier, M.; Cross, C.E. | Zeitschriftenaufsatz |
| 2011 | Welding residual stresses depending on solid-state transformation behaviour studied by numerical and experimental methods
Heinze, C.; Kromm, A.; Schwenk, C.; Kannengiesser, T.; Rethmeier, M. | Konferenzbeitrag |
| 2010 | Industrial application of welding temperature field and distortion visualization using FEA
Thater, R.; Perret, W.; Schwenk, C.; Alber, U.; Rethmeier, M. | Konferenzbeitrag |
| 2009 | Laserstrahl-MSG-Hybridschweißen mit hochlegierten Massiv- und Fülldrahtelektroden
Lorenz, S.; Kannengießer, T.; Michael, T.; Gumenyuk, A.; Rethmeier, M.; Posch, G. | Konferenzbeitrag |
| 2003 | MIG-Schweißen von Magnesiumlegierungen
Rethmeier, M. | Dissertation |