Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018OHB initiatives in development of additive manufacturing technology for opto-mechanical and mechatronic space systems
Thiel, Markus; Senese, Samuel; Sedlmaier, Thomas; Redlich, Daniel; Mulser, Marco; Veen, Egbert Jan van deer; Pambaguian, Laurent; Rodrigues, Goncalo; Zaltron, Paolo; Brinkers, Sanneke; Aumund-Kopp, Claus; Klein, Sebastian; Domagala, Tim; Kwast, Sander; McLoughlin, Anthony; Eick, Matthias; Melzer, Christian; Brückner, Frank; Ricardo, J.; Barroqueiro, Bruno
Konferenzbeitrag
2017Einfluss von Schwindungsdifferenz, Spritzgussparametern und Sinterbedingungen auf die Eigenschaften von Werkstoffverbunden beim Zwei-Komponenten-Metallpulverspritzguss
Mulser, Marco
Dissertation
2017Laser beam melting of technical springs
Mulser, Marco; Sommer, Kai; Aumund-Kopp, Claus; Petzoldt, Frank
Konferenzbeitrag
2017Standards for Metal Injection Moulding
Mulser, Marco; Petzoldt, Frank
Zeitschriftenaufsatz
2016Development of magnetic/non-magnetic stainless steel parts produced by two-component metal injection molding
Mulser, Marco; Veltl, Georg; Petzoldt, Frank
Zeitschriftenaufsatz
2016Joining during shaping: Two-component MIM provides new possibilities
Mulser, Marco
Zeitschriftenaufsatz
2016MIM for HT turbine parts: Gas-atomized versus mechanically milled Nb-Si alloy powder
Mulser, Marco; Hartwig, Thomas; Seemüller, Christoph; Heilmaier, Martin; Adkins, Nicholas; Wickins, Mick
Konferenzbeitrag
2016Two-component metal injection moulding of Ti-6Al-4V and stainless steel Bi-material parts
Mulser, Marco; Petzoldt, Frank
Konferenzbeitrag
2015Anforderungen an Pulver und Formgebung magnetokalorischer Werkstoffe
Mulser, Marco; Wieland, Sandra; Petzoldt, Frank
Konferenzbeitrag
2015Combining different or even contrasting material properties using two-component metal injection moulding
Mulser, Marco; Petzoldt, Frank
Konferenzbeitrag
2014Influence of powder metallurgical processing routes on phase formations in a multicomponent NbSi-alloy
Seemüller, C.; Hartwig, Thomas; Mulser, Marco; Adkins, N.; Wickins, M.; Heilmaier, M.
Zeitschriftenaufsatz
2014Influence of the processing technique on the properties of NB-SI intermetallic composites for high-temperature applications processed by MIM and HIP
Mulser, Marco; Hartwig, Thomas; Seemüller, Christoph; Heilmaier, Martin; Adkins, Nicholas J.E.; Wickins, M.
Konferenzbeitrag
2014Materials of high hardness and wear resistance joined to stainless steel by 2C-MIM
Mulser, M.; Baumann, A.; Ebert, S.; Imgrund, P.; Langer, I.; Petzoldt, F.
Konferenzbeitrag
2014Materials of high hardness and wear resistance joined to stainless steel by 2C-MIM
Mulser, Marco; Baumann, Andreas; Ebert, Sabine; Imgrund, Philipp; Langer, Ingolf; Petzoldt, Frank
Konferenzbeitrag
2013Influence of microstructure and processing on mechanical properties of advanced Nb-silicide alloys
Seemüller, C.; Heilmaier, M.; Hartwig, T.; Mulser, M.; Adkins, N.; Wickins, M.
Konferenzbeitrag
2013Nb-Si intermetallic composites for high-temperature applications produced by MIM
Mulser, Marco; Hartwig, Thomas; Seemüller, Christoph; Heilmaier, Martin; Adkins, N.; Wickins, M.
Konferenzbeitrag
2012Co-sintering of titanium: Stainless steel bi-material parts produced by 2C-MIM
Mulser, M.; Hartwig, T.; Petzoldt, F.
Konferenzbeitrag
2012Investigation of material combinations processed via two-component metal injection moulding (2C-MIM)
Dutra, G.B.; Mulser, M.; Calixto, R.; Petzoldt, F.
Konferenzbeitrag
2012Tungsten-copper / stainless steel Bi-material parts by 2C-MIM
Mulser, Marco; Hartwig, Thomas; Petzoldt, Frank
Konferenzbeitrag
2011Influence of the injection parameters on the interface formation of co-injected PIM parts
Mulser, M.; Petzoldt, F.; Lipinski, M.; Hepp, E.
Konferenzbeitrag
2011Interface formation and diffusion of alloying elements during cosintering of MIM 316L/17-4PH stainless steel parts: experiments and simulation
Dutra, G.B.; Mulser, M.; Petzoldt, F.
Zeitschriftenaufsatz
2010Influence of a mismatch in shrinkage for two-component metal injection moulding (2C-MIM)
Mulser, M.; Benedet Dutra, G.; Rager, J.; Petzoldt, F.
Konferenzbeitrag
2010Simulation of the Interdiffusion at the Interface of Co-Sintered Parts
Benedet Dutra, G.; Mulser, M.; Petzoldt, F.
Konferenzbeitrag