| | |
---|
2019 | Experimental investigation of contact heat transfer coefficients in nonisothermal glass molding by infrared thermography Vu, A.T.; Vu, A.N.; Liu, G.; Grunwald, T.; Dambon, O.; Klocke, F.; Bergs, T. | Zeitschriftenaufsatz |
2019 | Influence of Glassy Carbon Surface Finishing on its Wear Behavior during Precision Glass Moulding of Fused Silica Grunwald, Tim; Wilhelm, Dennis Patrick; Dambon, Olaf; Bergs, Thomas | Zeitschriftenaufsatz |
2018 | Analysis of form deviation in non-isothermal glass molding Kreilkamp, Holger; Grunwald, Tim; Dambon, Olaf; Klocke, Fritz | Konferenzbeitrag |
2018 | Digitalized glass optics production Staasmeyer, J.-H.; Liu, G.; Dambon, O. | Konferenzbeitrag |
2018 | Ductile grinding of tungsten carbide applying standard CNC machines Doetz, M.; Dambon, O.; Klocke, F.; Vogt, C.; Rascher, R.; Faehnle, O. | Konferenzbeitrag |
2018 | Ductile grinding of tungsten carbide molds applying standard CNC machines Vogt, C.; Fähnle, O.; Rascher, R.; Doetz, M.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2018 | Ductile mode single point diamond turning (SPDT) of binderless tungsten carbide molds Doetz, M.; Dambon, O.; Klocke, F.; Vogt, C.; Rascher, R.; Fähnle, O. | Konferenzbeitrag |
2018 | From turning to grinding: Ductile machining with gPVA Vogt, C.; Fähnle, O.; Rascher, R.; Doetz, M.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2018 | Increasing critcal depth of cut in ductile mode machining of tungsten carbide by process parameter controlling Doetz, M.; Dambon, O.; Klocke, F.; Lee, J.; Fähnle, O.; Langenbach, E. | Konferenzbeitrag |
2018 | Precision glass molding of fused silica optics Friedrichs, Marcel; Dambon, Olaf; Pongs, Guido; Zhang, Lin; Yi, Allen Y.; Klocke, Fritz | Konferenzbeitrag |
2018 | Process control in ductile mode machining of tungsten carbide Doetz, M.; Dambon, O.; Klocke, F.; Faehnle, O.; Langenbach, E. | Konferenzbeitrag |
2018 | Process window analysis of ductile mode machining of binderless tungsten carbide molds Doetz, M.; Lee, J.E.; Dambon, O.; Klocke, F.; Langenbach, E.; Faehnle, O. | Konferenzbeitrag |
2018 | Reconfigurable Robotic Solution for Effective Finishing of Complex Surfaces Hähnel, S.; Pini, F.; Leali, F.; Dambon, O.; Bergs, T.; Bletek, T. | Konferenzbeitrag |
2018 | Scalability of the precision glass molding process for an efficient optics production Liu, G.; Staasmeyer, J.-H.; Grunwald, T.; Dambon, O. | Konferenzbeitrag |
2018 | Surface integrity in ultra-precision grinding of transparent ceramics Klocke, Fritz; Dambon, Olaf; Bletek, Thomas; Höche, Thomas; Naumann, Falk; Hutzler, Thomas | Zeitschriftenaufsatz, Konferenzbeitrag |
2018 | Three wagons method applied: Optimization of level of surface roughness within ductile mode grinding of tungsten carbide molds Doetz, M.; Faehnle, O.; Klocke, F.; Dambon, O.; Langenbach, E. | Konferenzbeitrag |
2018 | Three wagons method to analyze ductile mode grinding processes Faehnle, O.; Doetz, M.; Dambon, O.; Langenbach, E. | Konferenzbeitrag |
2018 | Vacuum-assisted precision molding of 3D thin microstructure glass optics Vu, A.T.; Vogel, P.-A.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2017 | Analysis of critical process parameters of ductile mode grinding of brittle materials Faehnle, Oliver; Doetz, Marius; Dambon, Olaf | Zeitschriftenaufsatz |
2017 | Analysis of the application of poly-nanocrystalline diamond tools for ultra precision machining of steel with ultrasonic assistance Doetz, Marius; Dambon, Olaf; Klocke, Fritz; Bulla, Benjamin; Schottka, Karl; Robertson, David J. | Konferenzbeitrag |
2017 | Birefringence measurement for validation of simulation of precision glass molding process Pallicity, T.D.; Vu, A.-T.; Ramesh, K.; Mahajan, P.; Liu, G.; Dambon, O. | Zeitschriftenaufsatz |
2017 | Glass material modeling and its molding behavior Liu, Gang; Vu, Anh Tuan; Dambon, Olaf; Klocke, Fritz | Zeitschriftenaufsatz |
2017 | Protective coatings for chalcogenide glass molding Friedrichs, Marcel; Staasmeyer, Jan-Helge; Dambon, Olaf; Klocke, Fritz | Konferenzbeitrag |
2017 | Ultra-precision grinding of polycrystalline transparent ceramics Bletek, Thomas; Dambon, Olaf; Klocke, Fritz | Konferenzbeitrag |
2017 | Ultrapräzisionsschleifen von Formwerkzeugen für das Präzisionsblankpressen von optischen Gläsern Dambon, Olaf; Bletek, Thomas | Zeitschriftenaufsatz |
2017 | Ultrasonic tooling system design and development for single point diamond turning (SPDT) of ferrous metals Gaidys, R.; Dambon, O.; Ostasevicius, V.; Dicke, C.; Narijauskaite, B. | Zeitschriftenaufsatz |
2016 | Analysis of wear of fused silica moulding using glassy carbon moulds Klocke, F.; Dambon, O.; Liu, G.; Dukwen, J. | Zeitschriftenaufsatz |
2016 | Bulk metallic glass mold for high volume fabrication of micro optics He, P.; Li, L.; Wang, F.; Dambon, O.; Klocke, F.; Flores, K.M.; Yi, A.Y. | Konferenzbeitrag, Zeitschriftenaufsatz |
2016 | Chemical influence of different pH-values on ductile mode processing through ultra-precision diamond turning Doetz, M.; Dambon, O.; Klocke, F.; Faehnle, O. | Konferenzbeitrag |
2016 | A hybrid optimization approach in non-isothermal glass molding Vu, Anh-Tuan; Kreilkamp, Holger; Krishnamoorthi, Bharathwaj Janaki; Dambon, Olaf; Klocke, Fritz | Konferenzbeitrag |
2016 | Influence of the interlayer material selection for PtIr-coatings on the degradation mechanisms for use in Precision Glass Molding Friedrichs, Marcel; Dambon, Olaf; Bernhardt, Frank; Dong, Zhen; Klocke, Fritz | Konferenzbeitrag |
2016 | Model of coating wear degradation in precision glass molding Klocke, Fritz; Dambon, Olaf; Rohwerder, Michael; Bernhardt, Frank; Friedrichs, Marcel; Merzlikin, Sergly V. | Zeitschriftenaufsatz |
2016 | Nonisothermal glass molding for the cost-efficient production of precision freeform optics Vu, A.-T.; Kreilkamp, H.; Dambon, O.; Klocke, F. | Zeitschriftenaufsatz |
2016 | Precision glass molding of complex shaped chalcogenide glass lenses for IR applications Staasmeyer, J.-H.; Wang, Y.; Liu, G.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2016 | Precision glass molding: Cost efficient production of glass-optics with spectral range from 180nm ultraviolet to 13μm thermal infrared Staasmeyer, J.-H.; Kreilkamp, H.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2016 | Precision molding of optics: A review of its development and applications Zhang, L.; Liu, G.; Zhao, X.; Dambon, O.; Klocke, F.; Yi, A.Y. | Konferenzbeitrag |
2016 | Replicative manufacturing of complex lighting optics by non-isothermal glass molding Kreilkamp, H.; Vu, A.T.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2016 | Superfinish-machining of steel molds for injection molding Klocke, F.; Dambon, O.; Doetz, M. | Konferenzbeitrag |
2016 | Tribological wear analysis and numerical lifetime prediction of glassy carbon tools in fused silica molding Dukwen, Julia; Friedrichs, Marcel; Liu, Gang; Tang, Minjie; Dambon, Olaf; Klocke, Fritz | Zeitschriftenaufsatz |
2016 | Warmumformung von Präzisionsoptiken Grunwald, Tim; Dambon, Olaf; Klocke, Fritz | Aufsatz in Buch |
2015 | Blankpressen von High-Power LED-Vorsatzoptiken Kreilkamp, Holger; Dambon, Olaf | Vortrag |
2015 | Dressing of grinding wheels for ultra precision grinding of diffractive structures in tungsten carbide molds Bletek, Thomas; Klocke, Fritz; Hünten, Martin; Dambon, Olaf | Konferenzbeitrag |
2015 | Influence of coolant on ductile mode processing of binderless nanocrystalline tungsten carbide through ultraprecision diamond turning Doetz, Marius; Dambon, Olaf; Klocke, Fritz; Fähnle, Oliver | Konferenzbeitrag |
2015 | Influence of Ultrasonic Assisted Processing on the Ductility of Binderless Tungsten Carbide Bulla, B.; Klocke, F.; Dambon, O. | Konferenzbeitrag |
2015 | Nicht-isothermes Blankpressen komplexer LED-Optiken aus Glas Kreilkamp, Holger; Dambon, Olaf | Vortrag |
2015 | Numerical modeling-based design of the newly developed nonisothermal glass molding process for complex glass optics Vu, Anh Tuan; Kreilkamp, Holger; Liu, Gang; Dambon, Olaf; Klocke, Fritz | Konferenzbeitrag |
2015 | Präzise Glasoptiken für die LED-Beleuchtung Kreilkamp, Holger; Dambon, Olaf | Zeitschriftenaufsatz |
2015 | Robotic finishing process - An extrusion die case study Driemeyer Wilbert, A.; Behrens, B.; Zymla, C.; Dambon, O.; Klocke, F. | Zeitschriftenaufsatz |
2014 | Coating wear characteristic in heating tests under process conditions of Precision Glass Molding Klocke, Fritz; Dambon, Olaf; Rohwerder, M.; Bernhardt, Frank; Merzlikin, S. | Vortrag |
2014 | An integrated solution for mold shape modification in precision glass molding to compensate refractive index change and geometric deviation Su, L.; Wang, F.; He, P.; Dambon, O.; Klocke, F.; Yi, A.Y. | Zeitschriftenaufsatz |
2014 | Roboterbasierte Feinbearbeitung von Stahlwerkstoffen Klocke, F.; Dambon, O.; Andrecht, D.; Driemeyer Wilbert, A.; Kretschmer, A. | Zeitschriftenaufsatz |
2013 | Analysis and modeling of tribology effects in conventional glass polishing Wächter, D.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2013 | Automated finishing process - an extrusion die case study Wilbert, A.; Behrens, B.; Zymla, C.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2013 | Deterministic polishing of smooth and structured molds Klocke, F.; Brecher, C.; Brinksmeier, E.; Behrens, B.; Dambon, O.; Riemer, O.; Schulte, H.; Tuecks, R.; Wächter, D.; Wenzel, C.; Zunke, R. | Aufsatz in Buch |
2013 | Development of a ta-C diamond-like carbon (DLC) coating by magnetron sputtering for use in precision glass molding Bernhardt, F.; Georgiadis, K.; Dolle, L.; Dambon, O.; Klocke, F. | Zeitschriftenaufsatz |
2013 | Development of a ta-C DLC Coating by Magnetron Sputtering for Use in Precision Glass Molding Bernhardt, F.; Georgiadis, K.; Dolle, L.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2013 | Dressing of fine grained diamond grinding wheels for ultra precision grinding of structured molds in brittle hard materials Bletek, T.; Klocke, F.; Hünten, M.; Dambon, O. | Konferenzbeitrag |
2013 | Efficient machining of ultra precise steel moulds with freeform surfaces Bulla, Benjamin; Robertson, D.J.; Dambon, Olaf; Klocke, Fritz | Konferenzbeitrag |
2013 | Heißformgebungsverfahren zur kosteneffizienten Replikation nicht-abbildender Glasoptiken Kreilkamp, H.; Dambon, O. | Zeitschriftenaufsatz |
2013 | Influence on the ductile behaviour of binderless tungsten carbide applying ultrasonic assisted diamond turning Bulla, B.; Klocke, F.; Dambon, O.; Doetz, M. | Konferenzbeitrag |
2013 | Innovative surface technologies for optimized tooling Klocke, F.; Andrecht, D.; Heinen, D.; Arntz, K.; Dambon, O.; Schongen, F | Konferenzbeitrag |
2013 | Molding of diffractive glass lenses Hollstegge, D.; Hünten, M.; Dambon, O.; Klocke, F.; Bulla, B. | Konferenzbeitrag |
2013 | Novel testing facility for investigating wear on PGM sample tools Bernhardt, F.; Georgiadis, K.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2013 | Optimization of grinding and polishing to gain efficiency in manufacturing silicon carbide mirrors Wächter, D.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2012 | Analysis on ductile mode processing of binderless, nano crystalline tungsten carbide through ultra precision diamond turning Bulla, B.; Klocke, F.; Dambon, O. | Zeitschriftenaufsatz |
2012 | Application-Oriented testing of coatings for precision glass molding tools Georgiadis, K.; Dukwen, J.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2012 | Chuck system for integrated IR-based temperature - measurement in rotational grinding of sapphire wafers Klocke, F.; Dambon, O.; Herben, M.; Veselovac, D.; Adams, O.; Kuljanic, E.; Sortino, M.; Totis, G. | Konferenzbeitrag |
2012 | Complete qualification methodology for coatings of precision glass molding tools Klocke, F.; Georgiadis, K.; Dambon, O.; Bouzakis, K.D.; Gerardis, S.; Skordaris, G. | Zeitschriftenaufsatz |
2012 | Development of a flexible and reliable numerical simulation for precision glass molding of complex glass optics Klocke, F.; Wang, F.; Wang, Y.; Liu, G.; Dambon, O.; Yi, A.Y. | Konferenzbeitrag |
2012 | Influence of different steel alloys on the machining results in ultrasonic assisted diamond turning Bulla, B.; Klocke, F.; Dambon, O.; Hünten, M. | Konferenzbeitrag |
2012 | An integrated solution for compensation of refractive index drop and curve change in high precision glass molding Klocke, F.; Dambon, O.; Lijuan, S.; Wang, F.; Peng, H.; Allen, Y. | Konferenzbeitrag |
2012 | Intelligent process-design-software-tool for precision glass molding Klocke, F.; Dambon, O.; Liu, G.; Wang, F.; Hollstegge, D.; Yi, Y. | Konferenzbeitrag |
2012 | IntelliTool - Entwicklung und industrielle Qualifizierung eines modular aufgebauten, intelligenten Werkzeugsystems zur Überwachung und Regelung anspruchsvoller Hochleistungsschleifprozesse Brinksmeier, E.; Heinzel, C.; Dambon, O.; Klocke, F. | Bericht |
2012 | Investigations on the tool wear in precision glass molding Klocke, F.; Dambon, O.; Wächter, D.; Dukwen, J.; Georgiadis, K.; Hollstegge, D. | Konferenzbeitrag |
2012 | Knowledge-based process design for pad-polishing of precision optics Klocke, F.; Dambon, O.; Wächter, D. | Konferenzbeitrag |
2012 | Process chain for the replication of complex optical glass components Klocke, F.; Dambon, O.; Yi, A.Y.; Wang, F.; Hünten, M.; Georgiadis, K.; Hollstegge, D.; Dukwen, J. | Aufsatz in Buch |
2012 | Ressourceneffiziente Fertigung von Tiefziehwerkzeugen Klocke, F.; Heinen, D.; Andrecht, D.; Arntz, K.; Vieten, H.; Zymla, C.; Dambon, O.; Schongen, F.; Bäcker, V.; Feldhaus, B. | Zeitschriftenaufsatz |
2012 | Robot assisted manufacturing system for high gloss finishing of steel molds Wilbert, A.; Behrens, B.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2012 | Ultra precision grinding of wafer scale Hünten, M.; Klocke, F.; Dambon, O.; Bulla, B. | Konferenzbeitrag |
2012 | Ultrasonic assisted diamond turning of hardened steel for mould manufacturing Bulla, B.; Klocke, F.; Dambon, O.; Hünten, M. | Konferenzbeitrag |
2011 | 3D process simulation for precision glass molding of freeform and wafer optics Klocke, F.; Wang, Y.; Wang, F.; Liu, G.; Hollstegge, D.; Dambon, O.; Yi, A.Y. | Konferenzbeitrag |
2011 | Analysis of defect mechanisms in polishing of tool steels Klocke, Fritz; Dambon, Olaf; Behrens, Barbara | Zeitschriftenaufsatz |
2011 | Analytical process design for chemo-mechanical polishing of glass aspheres Waechter, D.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2011 | A complete qualification methodology for coatings of precision glass molding tools Klocke, F.; Georgiadis, K.; Dambon, O.; Bouzakis, K.D.; Gerardis, S.; Skordaris, G. | Konferenzbeitrag |
2011 | Development of a low cost high precision fabrication process for glass hybrid aspherical diffractive lenses He, P.; Wang, F.; Li, L.; Georgiadis, K.; Dambon, O.; Klocke, F.; Yi, A.Y. | Zeitschriftenaufsatz |
2011 | Enabling the production of aspheric glass lenses with diffractive structures Georgiadis, K.; Bulla, B.; Hollstegge, D.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2011 | A hybrid polymer-glass achromatic microlens array fabricated by compression molding Li, L.; He, P.; Wang, F.; Georgiadis, K.; Dambon, O.; Klocke, F.; Yi, A.Y. | Zeitschriftenaufsatz |
2011 | IR-based temperature measurement in rotational grinding of sapphire wafers Klocke, Fritz; Kuljanic, Elso; Dambon, Olaf; Sortino, M.; Herben, Maurice; Totis, G. | Konferenzbeitrag |
2011 | Residual stresses in glass after molding and its influence on optical properties Yi, A.Y.; Tao, B.; Klocke, F.; Dambon, O.; Wang, F. | Zeitschriftenaufsatz, Konferenzbeitrag |
2011 | SimPGM - A commercial simulation tool for precision glass molding industry Klocke, F.; Wang, F.; Liu, G.; Georgiadis, K.; Dambon, O.; Yi, A.Y. | Konferenzbeitrag |
2011 | Systematic influence investigation of key parameters for precision glass moulding process based on self-developed simulation tool - SimPGM Klocke, F.; Liu, G.; Wang, F.; Wang, Y.; Hollstegge, D.; Dambon, O.; Yi, A.Y. | Konferenzbeitrag |
2011 | Tooling system for diamond turning of hardened steel moulds with apsheric or non rotational symmetrical geometries Klocke, F.; Dambon, O.; Bulla, B. | Konferenzbeitrag |
2011 | Wafer level glass optics. Precision glass molding as an alternative manufacturing approach Hünten, M.; Hollstegge, D.; Wang, F.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2011 | Wafer level manufacturing of glass optics Klocke, F.; Dambon, O.; Hollstegge, D.; Hünten, M. | Konferenzbeitrag |
2011 | WaferLevelOptics - Neuer Ansatz zur Herstellung mikrooptischer Komponenten aus Glas Hünten, M.; Hollstegge, D.; Wang, Y.; Krappig, R.; Dambon, O.; Klocke, F. | Zeitschriftenaufsatz |
2011 | WaferLevelOptics project enables ever-smaller micro-optics Hünten, M.; Hollstegge, D.; Wang, Y.; Krappig, R.; Dambon, O.; Klocke, F. | Zeitschriftenaufsatz |
2010 | Case study applications in numerical simulation for precision glass molding process Klocke, F.; Liu, G.; Wang, Y.; Hollstegge, D.; Dambon, O.; Yi, A.Y.; Wang, F. | Konferenzbeitrag |
2010 | Comparison of nitride and noble metal coatings for precision glass molding tools Klocke, F.; Dambon, O.; Georgiadis, K. | Konferenzbeitrag |
2010 | Diamond turning of aspheric steel molds for optics replication Klocke, F.; Dambon, O.; Bulla, B. | Konferenzbeitrag |
2010 | Direct diamond turning of aspheric steel molds with ultra precise accuracy Klocke, F.; Dambon, O.; Bulla, B. | Konferenzbeitrag |
2010 | Integrated Process Chain for Glass Moulding of Freeform Surfaces Klocke, Fritz; Dambon, Olaf; Hollstegge, Daniel; Bresseler, Bernd | Konferenzbeitrag |
2010 | Investigation of the effects of process parameters on the glass-to-mold sticking force during precision glass molding Fischbach, K.D.; Georgiadis, K.; Wang, F.; Dambon, O.; Klocke, F.; Chen, Y.; Yi, A.Y. | Zeitschriftenaufsatz |
2010 | Key for success - integrative optics manufacturing Klocke, F.; Dambon, O.; Bulla, B. | Konferenzbeitrag |
2010 | Optical characterization of molded glass optics Yi, A.Y.; Klocke, F.; Dambon, O.; Wang, F.; Chen, Y.; Zhao, W. | Konferenzbeitrag |
2010 | Polishing glass - From basic investigations to industrial applications Waechter, D.; Zunke, R.; Schneider, U.; Dambon, O.; Klocke, F. | Konferenzbeitrag |
2010 | Precision glass molding. An integrative approach for the production of high precision micro-optics Hünten, M.; Klocke, F.; Dambon, O. | Konferenzbeitrag |
2010 | Process and Mould Design Optimization for Precision Glass Moulding via a Flexible and Reliable Numerical Simulation Klocke, Fritz; Dambon, Olaf; Hollstegge, Daniel; Yi, Allen Y.; Wang, Fei | Konferenzbeitrag |
2010 | Wafer level manufacturing of glass optics Hollstegge, Daniel; Hünten, Martin; Dambon, Olaf; Klocke, Fritz | Konferenzbeitrag |
2009 | Automated finishing of free-formed steel moulds Klocke, F.; Dambon, O.; Zunke, R.; Tücks, R.; Telgen, T. | Konferenzbeitrag |
2009 | Computer-based monitoring of the polishing processes using LabView Klocke, F.; Dambon, O.; Schneider, U.; Zunke, R.; Wächter, D. | Zeitschriftenaufsatz, Konferenzbeitrag |
2009 | Critical parameters in ultrasonic assisted diamond turning of hardened steel alloys Klocke, F.; Dambon, O.; Bulla, B.; Heselhaus, M. | Konferenzbeitrag |
2009 | Development of a flexible and reliable numerical simulation for glass molding process Klocke, F.; Dambon, O.; Wang, F.; Hollstegge, D.; Yi, A.Y. | Konferenzbeitrag |
2009 | Direct diamond turning of steel molds for optical replication Klocke, F.; Dambon, O.; Bulla, B.; Heselhaus, M. | Konferenzbeitrag |
2009 | Efficient mold manufacturing for precision glass molding Dambon, O.; Wang, F.; Klocke, F.; Pongs, G.; Bresseler, B.; Chen, Y.; Yi, A.Y. | Zeitschriftenaufsatz |
2009 | Integrative Fertigung von Mikrooptiken Klocke, F.; Dambon, O.; Hünten, M. | Zeitschriftenaufsatz |
2009 | Polishing of silicon based advanced ceramics Klocke, F.; Dambon, O.; Zunke, R.; Waechter, D. | Konferenzbeitrag |
2009 | Process influence of shrinkage in precision glass moulding Klocke, Fritz; Dambon, Olaf; Hollstegge, Daniel; Hünten, Martin; Wang, Fei | Konferenzbeitrag |
2009 | Rotationsschleifen von Saphirwafern Klocke, F.; Dambon, O.; Herben, M.; Wilbert, A. | Zeitschriftenaufsatz |
2009 | Ultrasonic assisted diamond turning of hardened steel for optical mould manufacturing Klocke, F.; Dambon, O.; Bulla, B.; Heselhaus, M. | Konferenzbeitrag |
2009 | Wafer-Scale-Fertigung von Miniaturoptiken Dambon, O.; Hollstegge, D. | Zeitschriftenaufsatz |
2008 | Finite element analysis of glass moulding Klocke, F.; Dambon, O.; Pongs, G.; Wang, F.; Brecher, C.; Winterschladen, M. | Zeitschriftenaufsatz |
2008 | Funktionalisierte Oberflächen Bulla, B.; Dambon, O.; Gunkel, C.; Klocke, F.; Metz, A.; Pflamm, J.T.; Zeller, R.; Zunke, R. | Konferenzbeitrag |
2008 | Funktionalisierte Oberflächen Bulla, B.; Dambon, O.; Gunkel, C.; Klocke, F.; Metz, A.; Pflamm, J.T.; Zeller, R.; Zunke, R. | Konferenzbeitrag |
2008 | Hochpräzise Glasoptiken für neue Anwendungsfelder Dambon, O.; Bresseler, B. | Zeitschriftenaufsatz |
2008 | Investigations to the molding accuracy of complex shaped glass components Klocke, F.; Dambon, O.; Sarikaya, H. | Konferenzbeitrag |
2008 | Modeling of contact behavior between polishing pad and workpiece surface Klocke, F.; Dambon, O.; Zunke, R. | Zeitschriftenaufsatz |
2008 | Optimized production of complex shaped optical components via presscion glass molding Klocke, F.; Dambon, O.; Sarikaya, H.; Wang, F. | Konferenzbeitrag |
2008 | Polishing-grinding - an innovation for high precision optics Klocke, F.; Grüntzig, A.; Hollstegge, D.; Dambon, O.; Riegel, J.; Herben, M. | Konferenzbeitrag |
2008 | Polishing-grinding - an innovation for manufacturing of high precision optics Klocke, F.; Grüntzig, A.; Hollstegge, D.; Völker, C.; Dambon, O.; Herben, M.; Bulla, B.; Czarlay, D.; Riegel, J. | Konferenzbeitrag |
2008 | Schleifen im Nanometerbereich Klocke, Fritz; Dambon, Olaf; Hünten, Martin | Zeitschriftenaufsatz |
2008 | Ultraschallunterstützte Diamantzerspanung Klocke, F.; Dambon, O.; Bulla, B. | Zeitschriftenaufsatz |
2008 | Ultrasonic assisted diamond turning of hardened steel with mono-crystalline diamond Klocke, F.; Dambon, O.; Bulla, B. | Konferenzbeitrag |
2007 | Simulation of precision glass molding process Klocke, F.; Dambon, O.; Wang, F. | Konferenzbeitrag |
2007 | Vibration-assisted machining research at Fraunhofer IPT - Diamond turning and precision grinding Dambon, O.; Klocke, F.; Heselhaus, M.; Bulla, B.; Weber, A.; Schug, R.; Bresseler, B. | Konferenzbeitrag |
2007 | Wirkmechanismen beim Polieren von Keramik Klocke, Fritz; Zunke, Richard; Dambon, Olaf | Zeitschriftenaufsatz |
2006 | Oberflächenwechselwirkungen beim Polieren von Stahl Klocke, F.; Bergs, T.; Demmer, A.; Dambon, O.; Schneider, U.; Zunke, R. | Zeitschriftenaufsatz |
2006 | Optimierte Schleifprozesstechnologien durch den Einsatz einer magnetisch gelagerten Werkzeugspindel Brecher, C.; Klocke, F.; Reinschke, K.; Rudolph, J.; Schäfer, C.; Dambon, O.; Zunke, R. | Zeitschriftenaufsatz |
2006 | Surface interactions in steel polishing for the precision tool making Dambon, O.; Demmer, A.; Peters, J. | Zeitschriftenaufsatz |
2005 | Influence of the polishing process on the near-surface zone of hardened and unhardened steel Klocke, F.; Dambon, O.; Capudi Filho, G.G. | Zeitschriftenaufsatz |
2005 | Magnetschleifen von Siliziumwafern - ein neuer Ansatz Khomich, M.; Alexeev, Y.; Demmer, A.; Pähler, D.; Dambon, O.; Schneider, U. | Zeitschriftenaufsatz |
2005 | Das Polieren von Stahl für den Werkzeug- und Formenbau Dambon, Olaf | Dissertation |
2005 | Removal mechanisms in fine polishing calcium fluoride and silicon Klocke, Fritz; Dambon, Olaf; Schneider, Udo | Zeitschriftenaufsatz |
2005 | Verfahren zur Feinbearbeitung harter Oberflaechen und Verwendung eines derartigen Verfahrens Dambon, O.; Klocke, F. | Patent |
2004 | Magnetic-abrasive machining of silicon wafers - a novel approach Khomich, M.; Alexeev, Y.; Demmer, A.; Pähler, D.; Dambon, O.; Schneider, U. | Zeitschriftenaufsatz |
2003 | Material removal mechanisms in lapping and polishing Evans, C.J.; Paul, E.; Dornfeld, D.; Lucca, D.A.; Byrne, G.; Tricard, M.; Klocke, F.; Dambon, O.; Mullany, B.A. | Zeitschriftenaufsatz |
2003 | Precision machining of glass for optical applications Klocke, F.; Dambon, O. | Aufsatz in Buch |
2003 | Verfahren und Vorrichtung zur numerisch gesteuerten Politur eines Werkstueckes Dambon, O.; Wetter, O. | Patent |
2002 | Influence exerted by the pad material and polishing suspension on reproducibility of a polishing process Klocke, F.; Hambücker, S.; Dambon, O. | Zeitschriftenaufsatz |
2002 | Innovative ultra-precision finish-machining processes for optical components Klocke, F.; Dambon, O.; Heselhaus, M.; Pongs, G. | Konferenzbeitrag |