Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
Gu, Dongdong; Zhang, Hongmei; Dai, Donghua; Xia, Mujian; Hong, Chen; Poprawe, Reinhart
Zeitschriftenaufsatz
2018Heat-induced molten pool boundary softening behavior and its effect on tensile properties of laser additive manufactured aluminum alloy
Dai, D.; Gu, D.; Zhang, H.; Zhang, J.; Du, Y.; Zhao, T.; Hong, C.; Gasser, A.; Poprawe, R.
Zeitschriftenaufsatz
2018Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts
Dai, D.; Gu, Dongdong; Zhang, H.; Xiong, J.; Ma, C.; Hong, C.; Poprawe, R.
Zeitschriftenaufsatz
2018Melt spreading behavior, microstructure evolution and wear resistance of selective laser melting additive manufactured AlN/AlSi10Mg nanocomposite
Dai, D.; Gu, D.; Xia, M.; Ma, C.; Chen, H.; Zhao, T.; Hong, C.; Gasser, A.; Poprawe, R.
Zeitschriftenaufsatz
2018Selective laser melting of rare earth element Sc modified aluminum alloy: Thermodynamics of precipitation behavior and its influence on mechanical properties
Zhang, H.; Gu, D.; Yang, J.; Dai, D.; Zhao, T.; Hong, C.; Gasser, A.; Poprawe, R.
Zeitschriftenaufsatz
2017Influence of additive multilayer feature on thermodynamics, stress and microstructure development during laser 3D printing of aluminum-based material
Dai, D.; Gu, D.; Poprawe, R.; Xia, M.
Zeitschriftenaufsatz
2015Densification behavior, microstructure evolution, and wear property of TiC nanoparticle reinforced AlSi10Mg bulk-form nanocomposites prepared by selective laser melting
Gu, D.; Wang, H.; Dai, D.; Chang, F.; Meiners, W.; Hagedorn, Y.-C.; Wissenbach, K.; Kelbassa, I.; Poprawe, R.
Zeitschriftenaufsatz
2015High-temperature oxidation performance and its mechanism of TiC/Inconel 625 composites prepared by laser metal deposition additive manufacturing
Hong, C.; Gu, D.D.; Dai, D.H.; Cao, S.N.; Alkhayat, M.; Jia, Q.B.; Gasser, A.; Weisheit, A.; Kelbassa, I.; Zhong, M.L.; Poprawe, R.
Zeitschriftenaufsatz
2015Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts
Hong, C.; Gu, D.; Dai, D.; Alkhayat, M.; Urban, W.; Yuan, P.; Cao, S.; Gasser, A.; Weisheit, A.; Kelbassa, I.; Zhong, M.; Poprawe, R.
Zeitschriftenaufsatz
2015Rapid fabrication of Al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser melting
Gu, D.; Wang, H.; Dai, D.; Yuan, P.; Meiners, W.; Poprawe, R.
Zeitschriftenaufsatz
2014Combined strengthening of multi-phase and graded interface in laser additive manufactured TiC/Inconel 718 composites
Gu, D.; Hong, C.; Jia, Q.; Dai, D.; Gasser, A.; Weisheit, A.; Kelbassa, I.; Zhong, M.; Poprawe, R.
Zeitschriftenaufsatz
2014Selective laser melting additive manufacturing of TiC/AlSi10Mg bulk-form nanocomposites with tailored microstructures and properties
Gu, D.; Wang, H.; Chang, F.; Dai, D.; Yuan, P.; Hagedorn, Y.-C.; Meiners, W.
Konferenzbeitrag, Zeitschriftenaufsatz
2013Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures
Hong, C.; Gu, D.; Dai, D.; Gasser, A.; Weisheit, A.; Kelbassa, I.; Zhong, M.; Poprawe, R.
Zeitschriftenaufsatz
2006Intelligentes Datenmanagement
Dai, D.; Brandner, C.
Zeitschriftenaufsatz