Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Nanoindentation of single- (Fe) and dual-beam (Fe and He) ion-irradiated ODS Fe-14Cr-based alloys: Effect of the initial microstructure on irradiation-induced hardening
Heintze, C.; Hilger, I.; Bergner, F.; Weissgärber, T.; Kieback, B.
Journal Article
2019Production of Ultrafine Grained Hardmetals by Electrical Resistance Sintering
Cintas, J.; Astacio, R.; Cuevas, F.G.; Montes, J.M.; Weissgaerber, T.; Lagos, M.A.; Torres, Y.; Gallardo, J.M.
Journal Article
2017Applications of metal foam as catalyst carrier
Walther, Gunnar; Gaitzsch, Uwe; Büttner, Tilo; Kieback, Bernd; Weißgärber, Thomas; Kolvenbach, Robin; Lincke, Marc
Conference Paper
2017Development of electric resistance sintering process for the fabrication of hard metals: Processing, microstructure and mechanical properties
Lagos, M.A.; Agote, I.; Schubert, T.; Weissgaerber, T.; Gallardo, J.M.; Montes, J.M.; Prakash, L.; Andreouli, C.; Oikonomou, V.; Lopez, D.; Calero, J.A.
Journal Article
2017High-entropy alloy CoCrFeMnNi produced by powder metallurgy
Eißmann, N.; Klöden, B.; Weißgärber, T.; Kieback, B.
Journal Article
2017Preparation of nanocrystalline Ce1-xSmx(Fe,Co)(11)Ti by melt spinning and mechanical alloying
Wuest, H.; Bommer, L.; Huber, A.M.; Goll, D.; Weissgaerber, T.; Kieback, B.
Journal Article
2017Silver/diamond composite material - powder metallurgical route and thermo-physical properties
Hutsch, T.; Schubert, T.; Weißgärber, T.; Kieback, B.
Conference Paper
2017TFP reinforced metal - one way to increase the specific strength
Hutsch, T.; Aßmann, F.; Weißgärber, T.; Kieback, B.
Conference Paper
2017Wetting and interfacial phenomena of Ni-Ta alloys on CVD-SiC
Valenza, F.; Gambaro, S.; Muolo, M.L.; Cacciamani, G.; Tatarko, P.; Saunders, T.G.; Reece, M.J.; Schmidt, A.; Schubert, T.; Weißgärber, T.; Passerone, A.
Journal Article
2016Active soldering of ceramic-ceramic and ceramic-metal compounds for aerospace applications
Schmidt, A.; Schubert, T.; Weißgärber, T.; Wilhelmi, C.; Süß, M.; Funke, M.; Kieback, B.
Conference Paper
2016Alternative Fabrication Routes toward Oxide-Dispersion-Strengthened Steels and Model Alloys
Bergner, F.; Hilger, I.; Virta, J.; Lagerbom, J.; Gerbeth, G.; Connolly, S.; Hong, Z.; Grant, P.S.; Weissgärber, T.
Journal Article
2016Comparison of hard metals fabricated by electrical resistance sintering (ERS) and sinter-HIP
Schubert, T.; Weißgärber, T.; Lagos, M.A.; Agote, I.; Gallardo, J.M.; Montes, J.M.; Prakash, L.; Oikonomou, P.; Andreouli, C.
Conference Paper
2016Development of the ERS process for the fabrication of hardmetal parts
Lagos, M.A.; Agote, I.; Gallardo-Fuentes, J.M.; Montes, J.M.; Schubert, T.; Weißgärber, T.; Prakash, L.; Andreouli, C.; Oikonomou, V.; Lopez, D.; Calero, J.A.
Conference Paper
2016Electrical Resistance Sintering (ERS) simulation tool. Application to hardmetals
Gallardo, J.M.; Montes, J.M.; Schubert, T.; Cintas, J.; Torres, Y.; Cuevas, F.G.; Weissgaerber, T.
Conference Paper
2016Electron beam melting of Ti-48Al-2Nb-0.7Cr-0.3Si: Feasibility investigation
Baudana, G.; Biamino, S.; Klöden, B.; Kirchner, A.; Weißgärber, T.; Kieback, B.; Pavese, M.; Ugues, D.; Fino, P.; Badini, C.
Journal Article
2016High-entropy alloy CoCrFeMnNi produced by powder metallurgy
Eißmann, N.; Klöden, B.; Weißgärber, T.; Kieback, B.
Conference Paper
2016Investigation of spark plasma sintered oxide-dispersion strengthened steels by means of small-angle neutron scattering
Hilger, I.; Bergner, F.; Ulbricht, A.; Wagner, A.; Weißgärber, T.; Kieback, B.; Heintze, C.; Dewhurst, C.D.
Journal Article
2016Manufacturing of fine spherical iron powder and the influence of the powder morphology on the sintering behaviour
Walther, G.; Büttner, T.; Kieback, B.; Weißgärber, T.; Hoffmann, M.
Conference Paper
2016Mechanical properties of Ti-6Al-4V fabricated by electron beam melting
Kirchner, A.; Klöden, B.; Weißgärber, T.; Kieback, B.; Schoberth, A.; Greitemeier, D.; Bagehorn, S.
Conference Paper
2016Metal injection moulding of iron-base oxide dispersion strengthened alloys
Meyer, A.; Recknagel, C.; Klöden, B.; Weißgärber, T.; Müller, S.; Langer, I.; Horke, K.; Kieback, B.; Singer, R.F.
Conference Paper
2016Powders for additive manufacturing
Kirchner, A.; Klöden, B.; Weißgärber, T.; Kieback, B.
Conference Paper
2016Refractory metal based materials for applications at high temperatures
Weißgärber, T.; Gaitzsch, U.; Walther, G.; Kieback, B.
Conference Paper
2016Thermal conductivity of PM Cu/diamond composites depending on the chromium content - prediction and characterization
Hutsch, T.; Schubert, T.; Weißgärber, T.; Kieback, B.
Conference Paper
2016Ti2AlC and Ti3SiCi2 MAX phase foams: Processing, porosity characterization and connection between processing parameters and porosity
Velasco, B.; Hutsch, T.; Weißgärber, T.; Gordo, E.; Tsipas, S.A.
Conference Paper
2015Bimodal grain size distribution of nanostructured ferritic ODS Fe-Cr alloys
Hilger, I.; Bergner, F.; Weißgärber, T.
Journal Article, Conference Paper
2015Comparison of consolidation routes for Mo-Si-B materials prepared by using nitride containing powders
Wiltner, A.; Klöden, B.; Hilger, I.; Weißgärber, T.; Kieback, B.
Journal Article, Conference Paper
2015Economic processing of metal matrix composites by combination of direct pressure sintering and thixo forging
Storz, A.; Seyboldt, C.; Riedmüller, K.; Schubert, T.; Weißgärber, T.
Conference Paper
2015Efficient processing of metal-matrix-composites by combining direct pressure sintering and subsequent thixoforging
Storz, A.; Schubert, T.; Weissgärber, T.; Seyboldt, C.; Riedmüller, K.R.
Conference Paper
2015Magnetic and structural properties of spark plasma sintered nanocrystalline NdFeB-powders
Wuest, H.; Bommer, L.; Weissgaerber, T.; Kieback, B.
Journal Article
2015Mechanical properties of Ti-6Al-4V additively manufactured by electron beam melting
Kirchner, A.; Kloeden, B.; Weißgärber, T.; Kieback, B.; Schoberth, A.; Bagehorn, S.; Greitemeier, D.
Conference Paper
2015Metal/FRP connection module – A powder metallurgical approach
Hutsch, T.; Lang, A.; Schubert, T.; Schiebel, P.; Christ, M.; Weißgärber, T.; Kieback, B.; Herrmann, A.
Conference Paper
2015New processing route for production of fine spherical iron powder
Walther, G.; Büttner, T.; Kieback, B.; Weißgärber, T.; Hoffmann, M.
Conference Paper
2015Process window for electron beam melting of Ti-6Al-4V
Kirchner, A.; Klöden, B.; Luft, J.; Weissgärber, T.; Kieback, B.
Journal Article
2015Semi-solid Formgebung von AMC-Werkstoffen
Seyboldt, C.; Liewald, M.; Schubert, T.; Weißgärber, T.; Gerlach, O.; Lechler, A.
Journal Article
2015Thermoelektrische Werkstoffe und Generatoren - aktueller Entwicklungsstand und zukünftige Potenziale für die Abwärmenutzung
Weißgärber, Thomas; Pacheco, Vincente; Recknagel, Carmen; Pöhle, Georg; Martin, Hans-Peter; Schilm, Jochen; Pönicke, Andreas; Feng, Bing; Kieback, Bernd; Michaelis, Alexander
Conference Paper
2014Advanced PM technologies to manufacture thermoelectric materials and supercapacitors
Weißgärber, T.; Pacheco, V.; Recknagel, C.; Walther, G.; Klöden, B.; Kieback, B.
Conference Paper
2014Electrochemical investigations on amorphous Fe-base alloys for alkaline water electrolysis
Müller, C.I.; Rauscher, T.; Schmidt, A.; Schubert, T.; Weißgärber, T.; Kieback, B.; Röntzsch, L.
Journal Article
2014Microstructural and mechanical characterisation of ODS ferritic alloys produced by mechanical alloying and spark plasma sintering
Hernandez-Mayoral, M.; Serrano, M.; Onorbe, E.; Garcia-Junceda, A.; Hilger, I.; Kloeden, B.; Weissgaerber, T.; Ulbricht, A.; Bergner, F.; Radiguet, B.; Etienne, A.; Shariq, A.; Dewhurst, C.D.
Journal Article
2014Preliminary comparison of hardmetals obtained by SPS and by Electrical Resistance Sintering (ERS)
Gallardo, J.M.; Montes, J.M.; Schubert, T.; Weißgärber, T.; Andreouli, C.; Oikonomou, V.; Prakash, L.; Calero, J.A.; Abrivard, G.; Guraya, C.; Lagos, M.A.; Agote, I.
Conference Paper
2014Process window for electron beam melting of Ti-6Al-4V
Kirchner, A.; Klöden, B.; Luft, J.; Weißgärber, T.; Kieback, B.
Conference Paper
2014Properties and sintering behaviour of fine spherical iron powders produced by a new hydrogen reduction process
Walther, G.; Büttner, T.; Kieback, B.; Weißgärber, T.
Conference Paper
2014Properties and sintering behaviour of fine spherical iron powders produced by new hydrogen reduction process
Walther, G.; Büttner, T.; Kieback, B.; Weißgärber, T.; Hoffmann, M.; Bachmann, G.
Journal Article
2014Properties of a TiAl turbocharger wheel produced by electron beam melting
Biamino, S.; Klöden, B.; Weißgärber, T.; Kieback, B.; Ackelid, U.
Conference Paper
2014The structural changes of Y2O3 in ferritic ODS alloys during milling
Hilger, I.; Tegel, M.; Gorley, M.J.; Grant, P.S.; Weißgärber, T.; Kieback, B.
Journal Article
2014Titanium aluminides for automotive applications processed by electron beam melting
Biamino, S.; Klöden, B.; Weißgärber, T.; Kieback, B.; Ackelid, U.
Conference Paper
2014Verfahren zur Wiedergewinnung von Neodym oder Neodymoxid aus einem Ausgangsgemisch
Tegel, Marcus; Röntzsch, Lars; Weißgärber, Thomas; Kieback, Bernd
Patent
2013Heat and gas transport properties in pelletized hydride-graphite-composites for hydrogen storage applications
Pohlmann, C.; Röntzsch, L.; Weissgärber, T.; Kieback, B.
Journal Article
2013Hydrogen storage systems based on hydride-graphite composites: Computer simulation and experimental validation
Herbrig, K.; Röntzsch, L.; Pohlmann, C.; Weißgärber, T.; Kieback, B.
Journal Article
2013Mechanical behaviour of pressed and sintered CP Ti and Ti-6Al-7Nb alloy obtained from master alloy addition powder
Bolzoni, L.; Weissgaerber, T.; Kieback, B.; Ruiz-Navas, E.M.; Gordo, E.
Journal Article
2013New method for producing fine spherical iron powders
Walther, G.; Büttner, T.; Kieback, B.; Weißgärber, T.; Hoffmann, M.; Blum, T.
Conference Paper
2013Novel approach for thermal diffusivity measurements in inert atmosphere using the flash method
Pohlmann, C.; Hutsch, T.; Röntzsch, L.; Weißgärber, T.; Kieback, B.
Journal Article
2013The processing and properties of metal injection moulded superalloys
Klöden, B.; Weißgärber, T.; Kieback, B.; Langer, I.
Journal Article
2013Pulvermetallurgische Entwicklungen neuer Hochleistungswerkstoffe auf der Basis Carbonnanomaterial verstärkter Verbundwerkstoffe
Hutsch, T.; Kieback, B.; Weißgärber, T.
Report
2013Reaction temperatures within Mo-Si powder mixtures and their influencing factors
Wiltner, A.; Klöden, B.; Weißgärber, T.; Hutsch, T.; Kieback, B.
Journal Article
2013Refraktärmetallbasierte Hochtemperaturwerkstoffe jenseits der Nickelbasislegierungen
Wiltner, A.; Klöden, B.; Weißgärber, T.; Kieback, B.
Journal Article
2013Solid-state hydrogen storage in Hydralloy-graphite composites
Pohlmann, C.; Röntzsch, L.; Heubner, F.; Weissgärber, T.; Kieback, B.
Journal Article
2012Comparative study on the dehydrogenation properties of TiCl4-doped LiAlH4 using different doping techniques
Fu, J.; Röntzsch, L.; Schmidt, T.; Tegel, M.; Weissgärber, T.; Kieback, B.
Journal Article
2012Graphite metal composites with tailored physical properties
Hutsch, T.; Schubert, T.; Weissgärber, T.; Kieback, B.
Journal Article
2012Improved dehydrogenation properties of lithium alanate (LiAlH 4) doped by low energy grinding
Fu, J.; Röntzsch, L.; Schmidt, T.; Weißgärber, T.; Kieback, B.
Journal Article
2012Influence of transition metal dopants and temperature on the dehydrogenation and rehydrogenation kinetics of NaAlH 4
Schmidt, T.; Röntzsch, L.; Weißgärber, T.; Kieback, B.
Journal Article
2012Metall-Carbon-Verbunde für funktionelle Anwendungen
Weißgärber, T.; Hutsch, T.; Kieback, B.
Journal Article
2012Microstructure and mechanical properties of melt-spun aluminium alloys consolidated by spark plasma sintering and forging
Schubert, Thomas; Lorenz, Bernd; Steger, Jürgen; Weißgärber, Thomas; Neugebauer, Reimund; Kieback, Bernd
Conference Paper
2012Nanoscale characterization of ODS Fe-9%Cr model alloys compacted by spark plasma sintering
Heintze, C.; Hernández-Mayoral, M.; Ulbricht, A.; Bergner, F.; Shariq, A.; Weissgärber, T.; Frielinghaus, H.
Journal Article
2012Rapidly solidified Fe-base alloys as electrode materials for water electrolysis
Schmidt, A.; Schubert, T.; Röntzsch, L.; Weissgärber, T.; Kieback, B.
Journal Article, Conference Paper
2012Tailored heat transfer characteristics of pelletized LiNH2-MgH2 and NaAlH4 hydrogen storage materials
Pohlmann, C.; Röntzsch, L.; Hu, J.; Weißgärber, T.; Kieback, B.; Fichtner, M.
Journal Article
2011Advanced powdermetallurgical technologies to manufacture metal matrix composites
Weissgaerber, T.; Hutsch, T.; Schubert, T.; Kieback, B.
Conference Paper
2011Carbon reinforced metal composites with tailored thermophysical and damping properties
Weissgaerber, T.; Hutsch, T.; Schubert, T.; Kieback, B.
Conference Paper
2011Hydrogen desorption properties of melt-spun and hydrogenated Mg-based alloys using in situ synchrotron X-ray diffraction and TGA
Kalinichenka, S.; Röntzsch, L.; Baehtz, C.; Weißgärber, T.; Kieback, B.
Journal Article
2011Hydrogen storage properties and microstructure of melt-spun Mg90Ni8RE2 (RE = Y, Nd, Gd)
Kalinichenka, S.; Röntzsch, L.; Riedl, T.; Weißgärber, T.; Kieback, B.
Journal Article
2011Hydrogen storage properties of compacts of melt-spun Mg90Ni10 flakes and expanded natural graphite
Pohlmann, C.; Röntzsch, L.; Kalinichenka, S.; Hutsch, T.; Weißgärber, T.; Kieback, B.
Journal Article, Conference Paper
2011Metall-Graphit-Verbundwerkstoffe für funktionelle Anwendungen
Hutsch, T.; Schubert, T.; Weißgärber, T.; Kieback, B.
Conference Paper
2011Microstructure and hydrogen storage properties of melt-spun MG-Cu-Ni-Y alloys
Kalinichenka, S.; Röntzsch, L.; Riedl, T.; Gemming, T.; Weißgärber, T.; Kieback, B.
Journal Article, Conference Paper
2011Microstructure of oxide dispersion strengthened Eurofer and iron-chromium alloys investigated by means of small-angle neutron scattering and transmission electron microscopy
Heintze, C.; Bergner, F.; Ulbricht, A.; Hernandez-Mayoral, M.; Keiderling, U.; Lindau, R.; Weissgärber, T.
Journal Article
2011Reversible hydrogen storage in Ti-Zr-codoped NaAlH4 under realistic operation conditions. Pt.2
Schmidt, T.; Röntzsch, L.; Weißgärber, T.; Kieback, B.
Journal Article, Conference Paper
2011Spark plasma sintering of diamond impregnated wire saw beads
Schmidt, J.; Knote, A.; Armbruster, M.; Weißgärber, T.; Kieback, B.
Journal Article
2011Thermische Ermüdung von CuB/Diamant-Verbundwerkstoffen
Schubert, T.; Weißgärber, T.; Kieback, B.; Weber, L.; Tavangar, R.
Conference Paper
2011Verfahren zur endformnahen Herstellung von Bauteilen
Klöden, B.; Schönitz, I.; Böhm, H.-D.; Kieback, B.; Weißgärber, T.
Patent
2010High temperature properties of MIM-processed auperalloys
Klöden, B.; Jehring, U.; Weißgärber, T.; Kieback, B.; Langer, R.; Stein, W.-E.
Journal Article
2010High-temperature properties of MIM-processed superalloys
Klöden, B.; Jehring, U.; Weißgärber, T.; Kieback, B.; Langer, I.; Stein, R.W.-E.
Conference Paper
2010In-situ monitoring of gas atmospheres during debinding and sintering of PM steel components
Quadbeck, P.; Schreyer, B.; Strauß, A.; Weißgärber, T.; Kieback, B.
Conference Paper
2010Innovative metal-graphite composites as thermally conducting materials
Hutsch, T.; Kieback, B.; Weißgärber, T.; Schubert, T.; Schmidt, J.
Conference Paper
2010Mechanische Eigenschaften von Yttriumoxid-verstärkten Fe-Cr-Legierungen nach der Konsolidierung durch Spark-Plasma-Sintern
Franke, P.; Heintze, C.; Bergner, F.; Weißgärber, T.
Journal Article
2010Microstructure and mechanical properties of an Al-Si alloy consolidated by spark plasma sintering
Schubert, T.; Schmidt, J.; Weißgärber, T.; Kieback, B.
Conference Paper
2010Nanomaterials and nanoanalysis for hydrogen solid state storage
Röntzsch, L.; Kalinichenka, S.; Schmidt, T.; Pohlmann, C.; Baehtz, C.; Riedl, T.; Weißgärber, T.; Kieback, B.
Conference Paper
2010Scalmalloy® = A unique high strength AlMgSc type material concept processed by innovative technologies for aerospace applications
Leuschner, R.; Schubert, T.; Weissgaerber, T.; Kieback, B.; Palm, F.
Conference Paper
2010Self-passivating tungsten alloys
Weißgärber, T.; Klöden, B.; Kieback, B.
Conference Paper
2010Spark plasma sintering of diamond impregnated wire saw beads
Schmidt, J.; Knote, A.; Armbruster, M.; Weißgärber, T.; Kieback, B.
Conference Paper
2009Advanced copper-PCM composites for thermal management applications
Weidmüller, H.; Kalinichenka, S.; Weißgärber, T.; Kieback, B.
Conference Paper
2009Effect of carbide formation in copper-graphite composites on thermo-physical properties
Weidmüller, H.; Weißgärber, T.; Schubert, T.; Kieback, B.
Conference Paper
2009Fabrication and properties of copper/carbon composites for thermal management applications
Schubert, T.; Weißgärber, T.; Kieback, B.
Conference Paper
2009Kupfer-PCM-Verbundwerkstoffe für Anwendungen im Bereich des thermischen Managements
Kalinichenka, S.; Schubert, T.; Weißgärber, T.; Kieback, B.
Conference Paper
2009Nickel-based foams for exhaust after treatment components
Walther, G.; Klöden, B.; Büttner, T.; Kieback, B.; Weißgärber, T.; Böhm, A.; Stender, I.; Naumann, D.
Conference Paper
2009Pulvermetallurgische Technologien zur Herstellung nanostrukturierter Werkstoffe
Weißgärber, T.
Journal Article
2009Rapid hot pressing of copper composites for electronics' cooling applications
Schubert, T.; Weißgärber, T.; Kieback, B.
Conference Paper
2009Spark plasma sintering and hot extrusion of aluminium alloy powder
Schubert, T.; Schmidt, J.; Weißgärber, T.; Kieback, B.
Conference Paper
2009Tune the properties of a partially reactive system with SPS technology
Hutsch, T.; Weißgärber, T.; Schmidt, J.; Kieback, B.
Conference Paper
2008Advanced copper-based composites filled with phase-change materials for new thermal-management applications
Weißgärber, T.; Weidmüller, H.; Kalinichenka, S.; Kieback, B.
Conference Paper
2008Fast hot pressing of diamond composites for electronics' cooling applications
Schubert, T.; Neubauer, E.; Weißgärber, T.; Kieback, B.
Conference Paper
2008Gesinterter schall- und schwingungsdaempfender Werkstoff
Hutsch, T.; Kieback, B.; Weissgaerber, T.; Schmidt, J.
Patent
2008Gesinterter Werkstoff
Hutsch, T.; Kieback, B.; Weissgaerber, T.; Schmidt, J.; Schubert, T.; Weidmueller, H.
Patent
2008Hochtemperaturbeständige Schäume auf Nickel-Basis für die Abgasnachbehandlung
Walther, G.; Klöden, B.; Büttner, T.; Weißgärber, T.; Kieback, B.; Böhm, A.; Stender, I.; Naumann, D.
Journal Article
2008Interfacial characterization of Cu/diamond composites prepared by powder metallurgy for heat sink applications
Schubert, T.; Ciupinski, L.; Zielinski, W.; Michalski, A.; Weißgärber, T.; Kieback, B.
Journal Article
2008Interfacial design of Cu-based composites prepared by powder metallurgy for heat sink applications
Schubert, T.; Trindade, B.; Weißgärber, T.; Kieback, B.
Conference Paper, Journal Article
2008Nanostructured high strength aluminium for automotive applications
Hummert, K; Schattevoy, R.; Broda, M.; Knappe, M.; Müller, R.; Beiss, P.; Klubberg, F.; Schubert, T.; Weißgärber, T.
Conference Paper
2008Neuartige Kupfer-PCM-Verbundwerkstoffe für Anwendungen im Bereich des thermischen Managements
Kalinichenka, S.; Weidmüller, H.; Weißgärber, T.; Kieback, B.
Journal Article
2008A new class of high temperature and corrosion resistant nickel-based open-cell foams
Walther, G.; Klöden, B.; Weißgärber, T.; Kieback, B.; Böhm, A.; Naumann, D.; Saberi, S.; Timberg, L.
Conference Paper
2008A new class of high temperature and corrosion resistant nickel-based open-cell foams
Walther, G.; Klöden, B.; Büttner, T.; Weißgärber, T.; Kieback, B.; Böhm, A.; Naumann, D.; Saberi, S.; Timberg, L.
Journal Article
2008A new class of high temperature and corrosion resitant nickel-based open-cell foams
Walther, G.; Klöden, B.; Weißgärber, T.; Kieback, B.; Böhm, A.; Naumann, D.; Saberi, S.; Timberg, L.
Conference Paper
2007Advanced composite materials for heat sink applications
Schubert, T.; Ciupinski, L.; Morgiel, J.; Weidmueller, H.; Weißgärber, T.; Kieback, B.
Conference Paper
2007Application of spark plasma sintering for manufacturing of thermoelectric materials
Schmidt, J.; Koenig, J.; Jacquot, A.; Boettner, H.; Weissgaerber, T.; Kieback, B.
Conference Paper
2007Carbide formation in copper-carbon composites and its effect on thermal conductivity
Schubert, T.; Weidmueller, H.; Weißgärber, T.; Kieback, B.
Conference Paper
2007Carbon-nanofiber reinforced Cu composites prepared by powder metallurgy for thermal management of electronic devices
Weidmueller, H.; Weissgaerber, T.; Hutsch, T.; Huenert, R.; Schmitt, T.; Mauthner, K.; Schulz-Harder, J.
Conference Paper
2007Formkoerper mit vorgebbarem, spezifischen elektrischen Widerstand, Verfahren zu seiner Herstellung und dessen Verwendung
Zumdick, M.; Weißgärber, T.; Boehm, A.; Lotze, G.; Boehm, H.
Patent
2007Interfacial design of Cu/SiC composites prepared by powder metallurgy for heat sink applications
Schubert, T.; Brendel, A.; Schmid, K.; Koeck, T.; Ciupinski, L.; Zielinski, W.; Weißgärber, T.; Kieback, B.
Journal Article
2007Kupfer-Verbundwerkstoffe für passive Kühlkörper in der Elektronik
Schubert, T.; Weidmueller, H.; Weißgärber, T.; Kieback, B.
Journal Article
2007Materials for thermal management of electronic devices
Weißgärber, T.; Schubert, T.; Weidmueller, H.; Schmidt, J.; Kieback, B.
Conference Paper
2007Thermomechanical properties of AlN-Cu composite materials prepared by solid state processing
Lee, K.M.; Oh, D.K.; Choi, W.S.; Weißgärber, T.; Kieback, B.
Conference Paper, Journal Article
2007Turbinenschaufel fuer Stroemungsmaschinen und Verfahren zu ihrer Herstellung
Boehm, A.; Buettner, T.; Walther, G.; Weissgaerber, T.; Schuetze, M.
Patent
2007Verfahren zur Herstellung eines offenporigen Formkoerpers ein solcher Formkoerper sowie dessen Verwendung
Weißgärber, T.; Boehm, H.; Engelmann, B.; Walther, G.; Boehm, A.; Naumann, D.
Patent
2006Anwendung des Hybridizer-Verfahrens zur Modifizierung von Pulvern für das thermische Spritzen
Böhm, A.; Weißgärber, T.; Pieper, W.; Dötzer, U.
Conference Paper
2006Cu-based composites prepared by powder metallurgy for thermal management of electronic devices
Schubert, T.; Weißgärber, T.
Conference Paper
2006Feldaktiviertes Sintern (FAST)
Kessel, H.; Hennicke, J.; Schmidt, J.; Weißgärber, T.; Kieback, B.; Herrmann, M.; Räthel, J.
Conference Paper
2006Herstellung von partikelverstärkten Verbundwerkstoffen mit Titan- Matrix durch Kurzzeitsinterung
Schmidt, J.; Schubert, T.; Weißgärber, T.; Kieback, B.
Conference Paper
2006Metallisches Bauteil
Buettner, T.; Boehm, A.; Weissgaerber, T.; Drossel, W.; Boehm, J.; Boehm, A.; Naumann, G.; Kunze, H.
Patent
2006Spark plasma sintering of intermetallics and metal matrix composites
Schmidt, J.; Weißgärber, T.; Schubert, T.; Kieback, B.
Conference Paper
2006TOFSIMS analysis of Cu-SiC composites for thermal management applications
Treichler, R.; Weissgaerber, T.; Kiendl, T.
Conference Paper, Journal Article
2006Unter Öl laufende Reibschichten für Synchronringe
Walther, G.; Schneider, L.; Weißgärber, T.; Gebhard, F.; Holderied, M.
Journal Article
2005Aluminium PM 'is a challenge that industry can overcome'
Schubert, T.; Weißgärber, T.; Kieback, B.; Balzer, H.; Neubing, H.-C.; Baum, U.; Braun, R.
Journal Article
2005Hagen: "Pulvermetallurgie: Simulation - Gefüge - Bauteileigenschaften"
Weißgärber, T.; Kolaska, H.
Journal Article
2005Hochleistungsreibschicht auf Eisenbasis für Synchronringe
Walther, G.; Schneider, L.; Weißgärber, T.; Kieback, B.; Gebhard, F.; Holderied, M.
Conference Paper
2005Microstructure and mechanical properties of ZrO2-reinforced MoSi2 matrix composites
Ballokova, B.; Hvizdos, P.; Besterci, M.; Ivan, J.; Zumdick, M.; Böhm, A.; Weißgärber, T.; Kieback, B.
Journal Article
2005Microwave-assisted sintering of co-based composites
Schmidt, J.; Schmid, P.; Schubert, T.; Weißgärber, T.; Kieback, B.
Conference Paper
2005PM - Simulation - Gefüge - Bauteileigenschaften - 23. Hagener Symposium Pulvermetallurgie 2004
Weißgärber, T.; Kolaska, H.
Journal Article
2005Spark plasma sintering of intermetallics and metal matrix composites
Schmidt, J.; Weißgärber, T.; Schubert, T.; Kieback, B.
Conference Paper
2005Synthesis and properties of Ti3SiC2 and Ti3SiC2-composites by powder metallurgical route
Schmidt, J.; Reinfried, N.; Schubert, T.; Weißgärber, T.; Grin, Y.; Kieback, B.
Conference Paper
2005Synthesis of Ti3SiC2 and Ti3SiC2-composites by the powder metallurgical route
Schmidt, J.; Heinze, K.; Reinfried, N.; Schubert, T.; Weißgärber, T.; Grin, Y.; Kieback, B.
Conference Paper
2005Unter Öl laufende Reibschichten für Synchronringe
Walther, G.; Schneider, L.; Weißgärber, T.; Gebhard, F.; Holderied, M.
Conference Paper
2005Verfahren zum Herstellen eines Formkoerpers unter Verwendung eines Ausgangsmaterials, welches Siliziumcarbid in Pulver- oder Partikelform sowie Kupfer enthaelt und so hergestellte Formkoerper
Schulz-Harder, J.; Meyer, A.; Weissgaerber, T.; Schubert, T.
Patent
2004Duese fuer Plasmabrenner
Lotze, G.; Weißgärber, T.; Kuemmel, K.; Moehler, W.; Krink, V.; Laurisch, F.
Patent
2004HERSTELLUNG VON MG2-SI UND TERNAERER VERBINDUNGEN MG2 (SI,E); (E=GE, SN, PB SOWIE UEBERGANGSMETALLE; KLEINER ALS 10 GEW.%) AUS MGH2 UND SILIZIUM SOWIE VON MAGNESIUMSILICIDFORMKOERPERN MITTELS PULS-PLASMA-SYNTHESE
Schmidt, M.; Schmidt, J.; Grin, Y.; Boehm, A.; Kieback, B.; Scholl, R.; Schubert, T.; Weissgaerber, T.; Zumdick, M.
Patent
2004In einem Medium laufende Reibschicht
Gebhard, F.; Holdenried, M.; Schneider, L.; Walther, G.; Weißgärber, T.
Patent
2004Microstructural and chemical properties of AlN-Cu nanocomposite powders prepared by planetary ball milling
Lee, K.M.; Weißgärber, T.; Kieback, B.
Journal Article
2004P/M aluminium structural parts for automotive application
Schubert, T.; Weißgärber, T.; Kieback, B.; Balzer, H.; Neubing, H.C.; Baum, U.; Braun, R.
Conference Paper
2004Pulvermetallurgisch erzeugter Formkoerper und Verfahren zu dessen Herstellung
Schneider, L.; Kieback, B.; Weißgärber, T.
Patent
2004Pulvermetallurgisch hergestelltes oder bearbeitetes Bauteil sowie Verfahren zu seiner Herstellung
Boehm, A.; Weißgärber, T.; Naumann, D.
Patent
2003Anwendung des Hybridizier-Verfahrens zur Modifizierung von Pulvern für das thermische Spritzen
Böhm, A.; Weißgärber, T.; Pieper, W.; Dötzer, U.
Conference Paper
2003Composites based on metals and intermetallics-recent developments at FhG-IFAM Dresden
Weißgärber, T.; Böhm, A.; Schubert, T.; Kieback, B.
Conference Paper
2003Cu-SiC composites for thermal management application
Weißgärber, T.; Meyer, A.; Schulz-Harder, J.; Lefranc, G.; Stöcker, O.
Conference Paper
2003Iron based materials with improved oxidation resistance prepared by powder metallurgy
Weißgärber, T.; Schneider, L.; Kieback, B.
Conference Paper
2003Metallische Verbundwerkstoffe für passive Kühlkörper in der Elektronik
Weißgärber, T.; Schubert, T.; Kieback, B.
Conference Paper
2003Model for calculation of swelling effects in Ti-Al system during transient liquid phase sintering
Böhm, A.; Weißgärber, T.; Lotze, G.; Kieback, B.
Conference Paper
2003Nanopulvermetallurgie
Kieback, B.; Weißgärber, T.
Conference Paper
2003Powder metallurgy for light weight and ultra-light weight materials
Kieback, B.; Stephani, G.; Weißgärber, T.; Schubert, T.; Waag, U.; Böhm, A.; Andersen, O.; Göhler, H.; Reinfried, M.
Journal Article
2003Powder metallurgy for light weight and ultra-light weight materials
Kieback, B.; Stephani, G.; Weißgärber, T.; Schubert, T.; Waag, U.; Böhm, A.; Andersen, O.; Göhler, H.; Reinfried, M.
Conference Paper
2003Preparation of NiTi alloys by powder metallurgy using elemental powders
Weißgärber, T.; Reinfried, N.; Böhm, A.; Kieback, B.
Conference Paper
2003Pulvermetallurgisch durch Reaktionssintern hergestelltes Bauteil aus einem Titanaluminid-Werkstoff und Verfahren zu seiner Herstellung
Kieback, B.; Boehm, A.; Weißgärber, T.
Patent
2003Pulvermetallurgisch hergestellte Sputtertargets für die Dünnschichttechnik
Büttner, T.; Böhm, A.; Böhm, H.-D.; Weißgärber, T.; Kieback, B.
Journal Article
2003The structure and microhardness evolution in submicrocrystalline molybdenum processed by severe plastic deformation followed by annealing
Kolobov, Y.R.; Kieback, B.; Ivanov, K.V.; Weißgärber, T.; Girsova, N.V.; Pochivalov, Y.I.; Grabovetskaya, G.P.; Ivanov, M.B.; Kazyhanov, V.U.; Alexandrov, I.V.
Journal Article
2002Combined use of powder metallurgy technologies and methods of severe plastic deformation to obtain advanced nanostructured materials
Ivanov, K.V.; Grabovetskaya, G.P.; Kolobov, Y.R.; Kieback, B.; Weißgärber, T.
Conference Paper, Journal Article
2002Methodische Aspekte tribologischer Prüfungen unter Einwirkung körniger Abrasivstoffe
Walther, G.; Schneider, L.; Weißgärber, T.
Conference Paper
2002Nanodispersion strengthened metallic materials
Weißgärber, T.; Sauer, C.; Kieback, B.
Journal Article
2002Structure and mechanical properties of powder Ni- and Cu-based nanocomposites produced by severe plastic deformation
Kolobov, Y.R.; Kieback, B.; Ivanov, K.V.; Weißgärber, T.; Grabovetskaya, G.P.; Girsova, N.V.; Islamgaliev, R.K.
Conference Paper
2002Synthesis of intermetallics and nanocomposites by high energy milling
Kieback, B.; Kubsch, H.; Böhm, A.; Zumdick, M.; Weißgärber, T.
Journal Article
2001Cu-SiC composites for thermal management application prepared by powder metallurgy
Weißgärber, T.; Schulz-Harder, J.; Meyer, H.; Lefranc, G.; Stöcker, O.
Conference Paper
2001Herstellung und Eigenschaften von Cu-SiC Verbundwerkstoffen
Weißgärber, T.; Schulz-Harder, J.; Meyer, H.; Lefranc, G.; Stöcker, O.
Conference Paper
2001Microstructural characteristics and thermal expansion coefficient of AIN-Cu nanocomposite materials prepared by solid state processing
Lee, K.-M.; Sung, J.; Lee, S.-I.; Kim, J.-S.; Weißgärber, T.; Kieback, B.
Journal Article
2000Cu-SiC composites for thermal management applications prepared by powder metallurgy
Weißgärber, T.; Schulz-Harder, J.; Meyer, A.; Lefranc, L.; Kurth, R.
Conference Paper
2000Dispersion strengthened materials obtained by mechanical alloying - an overview
Weißgärber, T.; Kieback, B.F.
Conference Paper
1999Dispersion strengthened materials obstained by mechanical alloying
Weißgärber, T.; Kieback, B.
Conference Paper
1999Gradientenwerkstoffe
Weißgärber, T.
Journal Article
1999Herstellung gradierter Folien mittels Naßpulversprühen
Schindler, J.; Hermann, M.; Weißgärber, T.; Kieback, B.
Conference Paper
1998Dispersion strengthening of copper alloys
Sauer, C.; Weißgärber, T.; Dehm, G.; Mayer, J.; Püsche, W.; Kieback, B.
Journal Article
1998Effect of microstructural parameters on the creep behaviour of dispersion strengthened copper alloys
Sauer, C.; Weißgärber, T.; Püsche, W.; Soyez, G.; Mayer, J.
Conference Paper
1998Formation and interface structure of TiC particles in dispersion strengthened Cu alloys
Dehm, G.; Thomas, J.; Mayer, J.; Weißgärber, T.; Püsche, W.; Sauer, C.
Journal Article
1998Herstellung, Gefüge und Eigenschaften TiC-dispersionsverfestigter Kupferlegierungen
Weißgärber, T.
Dissertation
1998Metall-Matrix-Verbundwerkstoffe. Werkstoffe nach Maß
Schubert, T.; Weißgärber, T.
Journal Article
1998Model mechanizmu deformacie systemu Cu-TiC
Besterci, M.; Ivan, J.; Kovac, L.; Weißgärber, T.; Sauer, C.
Journal Article
1998Properties of TiC dispersion strengthened Cu alloys at room and elevated temperatures
Weißgärber, T.; Sauer, C.; Kieback, B.; Soyez, G.; Mayer, J.
Conference Paper
1997Effect of process parameters on the microstructure and properties of TiC dispersion strengthened copper alloys
Weißgärber, T.; Sauer, C.; Püsche, W.; Kieback, B.; Dehm, G.; Mayer, J.
Conference Paper
1997Herstellung und Eigenschaften dispersionsverfestigter Kupferlegierungen
Weißgärber, T.; Sauer, C.; Kieback, B.
Journal Article
1997High temperature creep of microcrystalline dispersion strengthened copper alloys
Sauer, C.; Weißgärber, T.; Püsche, W.; Dehm, G.; Mayer, J.; Kieback, B.
Journal Article