| | |
---|
| Futur: Vision, Innovation, Realisation. Research and Development at the Production Technology Center Berlin : Uhlmann, E. | Journal |
| Futur: Vision, Innovation, Realisierung. Mitteilungen aus dem Produktionstechnischen Zentrum (PTZ), Berlin : Uhlmann, E. | Journal |
2021 | Artefaktkorrektur für die 3D-Röntgenbildgebung auf Basis synthetischer Röntgenprojektionen Melnik, Steffen : Uhlmann, Eckart | Dissertation |
2020 | DEM-simulation of particle behaviour during cutting edge preparation of micro-milling tools by immersed tumbling Uhlmann, E.; Polte, M.; Polte, J.; Kuche, Y. | Conference Paper |
2020 | Design and hard machining of a high performance ceramic impeller Uhlmann, E.; Polte, J.; Koprowski, S.; Kochan, J.; Borsoi Klein, T. | Conference Paper |
2020 | Development of a machining strategy for diamond slide burnishing burnishing tools made of polycrystalline diamond (PCD) Uhlmann, E.; Polte, M.; Polte, J.; Kuche, Y.; Wendorf, S.; Siebel, D. | Conference Paper |
2020 | Development of monolithic ceramic milling tools for machining graphite Uhlmann, E.; Polte, M.; Polte, J.; Kuche, Y.; Hocke, T. | Conference Paper |
2020 | Efficient abrasive water jet milling for near-net-shape fabrication of difficult-to-cut materials Uhlmann, E.; Männel, C.; Braun, T. | Journal Article |
2020 | Einsatzverhalten keramischer Fräswerkzeuge bei der Zerspanung von glas- und kohlenstofffaserverstärkten Kunststoffen Stawiszynski, Bartek : Kohl, Holger; Uhlmann, Eckart; Biermann, Dirk | Dissertation |
2020 | Electrical discharge dressing of honing stones Uhlmann, E.; Yabroudi, S.; Zimmermann, S.; Gerlitzky, G.; Polte, M.; Klink, U.; Sihling, B. | Journal Article |
2020 | Increased efficiency and accuracy in ultra-precision machining through adapted CAM software Uhlmann, E.; Polte, J.; Hein, C.; Kuche, Y.; Dörr, M. | Conference Paper |
2020 | Influence of the fatty acid profile on the lubricating film formation in micro-milling process on 7050-T7451 aluminum alloy Chanes de Souza, M.; Wiesner, H.M.; Kuche, Y.; Polte, J.; Oliveira Gomes, J. de; Uhlmann, E. | Journal Article |
2020 | Modelling of a thermoelectric self-cooling system based on thermal resistance networks for linear direct drives in machine tools Uhlmann, E.; Salein, S.; Polte, M.; Triebel, F. | Journal Article |
2020 | Optimization with the evolution strategy by example of electrical-discharge drilling Streckenbach, J.; Koref, I.S.; Rechenberg, I.; Uhlmann, E. | Journal Article |
2020 | Oxidized tool electrodes for optimized electro-discharge drilling Uhlmann, E.; Polte, M.; Streckenbach, J.; Dinh, N.C.; Börnstein, J.; Wolf, C.-S.; Camin, B. | Conference Paper |
2020 | Process behaviour of micro-textured CVD diamond thick film cutting tools during turning of Ti-6Al-4V Uhlmann, E.; Schröter, D. | Journal Article, Conference Paper |
2020 | Reduktion thermisch bedingter Verlagerungen durch Integration von Peltierelementen in eine Hochfrequenzmotorspindel Uhlmann, E.; Salein, S.; Iden, N.; Polte, J.; Temme, P.; Hartung, D.; Perschewski, S. | Journal Article |
2020 | Sortierung von Objekten in mikrofluidischen Systemen auf Basis von piezogetriebenen Aktoren Horbert, Peter Paul : Meyer, H.J.; Uhlmann, E.; Henkel, T. | Dissertation |
2020 | Tool wear prevention in ultra-precision polymer machining Uhlmann, E.; Fang, F.; Polte, J.; Hein, C.; Lai, M.; Dörr, M.; Jahnke, C. | Conference Paper |
2020 | Trochoid milling with industrial robots Uhlmann, E.; Reinkober, S.; Hoffmann, M.; Käpernick, P. | Journal Article, Conference Paper |
2020 | Wear evaluation of CVD diamond coated high-performance drilling tools for machining of carbon fiber reinforced plastics (CFRP) Uhlmann, E.; Reimers, W.; Hinzmann, D.; Christiansen, G.; Böttcher, K. | Journal Article |
2019 | Elektromechanisches Glattwalzen von Stahllegierungen Uhlmann, E.; Thom, S.; Prasol, L.; Haberbosch, K.; Drieux, S. | Journal Article |
2019 | 3-Achs-Portalfräsmaschine als Demonstrator für ein modulares Werkzeugmaschinengestell Uhlmann, E.; Polte, M.; Blumberg, J.; Peukert, B. | Journal Article |
2019 | Application of laser surface nanotexturing for the reduction of peri-implantitis on biomedical grade 5 Ti-6Al-4V dental abutments Uhlmann, E.; Schweitzer, L.; Cunha, A.; Polte, J.; Huth-Herms, K.; Kieburg, H.; Hesse, B. | Conference Paper |
2019 | Belt grinding of cast iron without cooling lubricant Uhlmann, E.; Buelter, M. | Journal Article, Conference Paper |
2019 | CVD-Diamantwerkzeuge mit SiC-Zwischenschicht Uhlmann, E.; Barth, E.; Gäbler, J.; Höfer, M. | Journal Article |
2019 | Digital integrierte Produktion. Lösungen aus Berlin / Brandenburg. Vorträge / Proceedings PTK 2019 : Uhlmann, Eckart (Hrsg.) | Conference Proceedings |
2019 | Ecological and functional optimization of the pretreatment process for plasma based coatings of cutting tools Uhlmann, E.; Riemer, H.; An, S.; Fröhlich, M.; Paschke, H.; Petersen, M. | Journal Article, Conference Paper |
2019 | Einfluss der Schärfparameter auf die Schleifscheibentopographie Uhlmann, E.; Muthulingam, A. | Journal Article |
2019 | Einsatzverhalten von CVD-Diamantdünnschichtwerkzeugen Uhlmann, E.; Hinzmann, D. | Journal Article |
2019 | Heat treatment of SLM-LMD hybrid components Uhlmann, Eckart; Düchting, Jan; Petrat, Torsten; Graf, Benjamin; Rethmeier, Michael | Conference Paper |
2019 | Hochleistungsbohrwerkzeuge für CFK Uhlmann, E.; Christiansen, G.; Reimers, W.; Brömmelhoff, K. | Journal Article |
2019 | In-Situ-Kraftmessung bei variablen Werkzeugwinkeln Uhlmann, Eckart; Uhlemann, Sebastian; Kochan, Jaroslaw | Journal Article |
2019 | In-Situ-Kraftmessung bei variablen Werkzeugwinkeln Uhlmann, Eckart; Uhlemann, Sebastian; Kochan, Jaroslaw | Journal Article |
2019 | Increasing the productivity and quality of flute grinding processes through the use of layered grinding wheels Uhlmann, E.; Schroer, N.; Muthulingam, A.; Gulzow, B. | Journal Article, Conference Paper |
2019 | Interaction of tool and workpiece in ultrasonic-assisted grinding of high performance ceramics Uhlmann, E.; Bruckhoff, J. | Journal Article, Conference Paper |
2019 | Merkmalbasiertes Nutzerunterstützungssystem für die Erfassung von Bauteilen mittels industrieller Computertomographie Sawczyn, Nikolas : Hilgenberg, K.; Uhlmann, Eckart; Karpuschewski, B. | Dissertation |
2019 | Mikrostrukturierte CVD-Diamant-Werkzeuge Bachmann, H.; Meier, P.; Uhlmann, E.; Schröter, D. | Journal Article |
2019 | Modelling of Abrasive Water Jet Cutting with Controlled Depth for Near-Net-Shape Fabrication Uhlmann, E.; Männel, C. | Journal Article, Conference Paper |
2019 | Modelling of brushing processes Sommerfeld, C.; Uhlmann, E.; Hoyer, A. | Conference Paper |
2019 | Niobcarbid statt Wolframcarbid Alternativer Schneidstoff in der Drehbearbeitung Kropidlowski, K.; Uhlmann, E.; Woydt, M.; Theiler, G.; Gradt, T. | Journal Article |
2019 | Ortsabhängiges Verschleißmodell für das Doppelseitenplanschleifen mit Planetenkinematik List, Michael : Rethmeier, M.; Uhlmann, E.; Klocke, F. | Dissertation |
2019 | Pocket milling of composite fibre-reinforced polymer using industrial robot Melo, E.G. de; Klein, T.B.; Reinkober, S.; Gomes, J.D.O.; Uhlmann, E. | Journal Article, Conference Paper |
2019 | A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance Kovacs, Klaudia; Ansari, Fazel; Geisert, Claudio; Uhlmann, E.; Glawar, Robert; Sihn, Wilfried | Conference Paper |
2019 | Profilverschleißreduzierung beim Planschleifen Lichtschlag, L.; Uhlmann, E. | Journal Article |
2019 | Reconfiguring machine tool behavior via smart building block systems Uhlmann, E.; Peukert, B. | Journal Article, Conference Paper |
2019 | System zur wenigstens bereichsweisen Regelung einer Temperatur eines Industrieroboters und Verfahren zum Erhöhen der Arbeitsgenauigkeit eines Industrieroboters Uhlmann, Eckart; Reinkober, Sascha; Lenz, Frederik | Patent |
2019 | Thermal and technological aspects of double face grinding of Al2O3 ceramic materials Deja, M.; List, M.; Lichtschlag, L.; Uhlmann, E. | Journal Article |
2019 | Tool wear modelling using micro tool diameter reduction for micro-end-milling of tool steel H13 Manso, C.S.; Thom, S.; Uhlmann, E.; Assis, C.L.F de; Conte, E.G del | Journal Article |
2019 | Verbundprojekt SmartStream: Intelligente Bearbeitung durch die Verwendung schaltbarer Fluide Schmiedel, C.; Bierwisch, C.; Uhlmann, E.; Menzel, P.; Mohseni-Mofidi, S.; Breinlinger, T.; Nutto, C. | Conference Paper |
2019 | Verfahren zur kamerabasierten Instrumentennavigation am Beispiel der HNO-Chirurgie Katanacho, Manuel : Krüger, Jörg; Uhlmann, Eckart; Wittenberg, Thomas | Dissertation |
2018 | 3D-Vorkonturierung mittels Wasserabrasivstrahl Uhlmann, E.; Männel, C. | Journal Article |
2018 | Application of additive manufactured tungsten carbide tool electrodes in EDM Uhlmann, Eckart; Bergmann, André; Bolz, Robert; Gridin, Witalij | Journal Article, Conference Paper |
2018 | Application of Micro Structured, Boron Doped CVD-diamond as μEDM Tool Electrodes Uhlmann, Eckart; Oberschmidt, Dirk; Bolz, Robert | Journal Article, Conference Paper |
2018 | Artefaktkorrektur für die Computertomographie Uhlmann, Eckart; Polte, Julian; Melnik, Steffen | Journal Article |
2018 | Boron-doped CVD diamond micro-end mills for machining titanium Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Oberschmidt, Dirk | Conference Paper |
2018 | Camera-based instrument navigation in ENT-surgery Katanacho, Manuel; Uhlmann, Eckart | Conference Paper |
2018 | Cluster identification of sensor data for predictive maintenance in a Selective Laser Melting machine tool Uhlmann, E.; Pastl Pontes, R.; Geisert, C.; Hohwieler, E. | Journal Article, Conference Paper |
2018 | Concept of sustainable data for a selective laser melting machine Uhlmann, Eckart; Pastl Pontes, Rodrigo; Laghmouchi, Abdelhakim; Bergmann, André | Journal Article, Conference Paper |
2018 | Design Simulation of Components made from Diamond-Ceramic Composites for Deep-Sea Mining Uhlmann, Eckart; Uhlemann, Sebastian; Borsoi Klein, Tiago; Schmiedel, Christian | Poster |
2018 | Diamond burnishing for mould and die industry Uhlmann, Eckart; Oberschmidt, Dirk; Guhde, Sebastian; Polte, Mitchel; Polte, Julian | Conference Paper |
2018 | Ductile machining of brittle materials for manufacturing micro-optic components Uhlmann, Eckart; Oberschmidt, Dirk; Rolon, D.A.; Kühne, S.; Jagodzinski, M.; Malcher, M. | Conference Paper |
2018 | Dynamic Analysis of Abrasive Filaments in Contact with Different Workpiece Geometries Uhlmann, E.; Sommerfeld, C. | Journal Article |
2018 | The Effects of Laser Microtexturing of Biomedical Grade 5 Ti-6Al-4V Dental Implants (Abutment) on Biofilm Formation Uhlmann, Eckart; Schweitzer, Luiz; Kieburg, Heinz; Spielvogel, Anja; Huth-Herms, Katrin | Journal Article, Conference Paper |
2018 | Einsatzverhalten und Leistungsbedarfe unterschiedlicher Kühlungsmethoden beim Außen-Längs-Runddrehen Fürstmann, Paul : Krüger, J.; Uhlmann, Eckart; Klocke, F. | Dissertation |
2018 | Electro-discharge drilling with MP-based carbon fibre electrodes Uhlmann, Eckart; Perfilov, Ivan; Yabroudi, S.; Schweitzer, Luiz; Polte, Mitchel | Conference Paper |
2018 | Endkonturnahe Schruppbearbeitung von Titanaluminid mittels Wasserabrasivstrahlen mit kontrollierter Schnitttiefe Faltin, Fabian : Kohl, Holger; Uhlmann, E.; Abele, E. | Dissertation |
2018 | Entwicklung eines hochauflösenden wellenlängendispersiven Spektrometers für den Spektralbereich harter Röntgenstrahlung Holfelder, Ina : Oberschmidt, D.; Uhlmann, Eckart; Beckhoff, B. | Dissertation |
2018 | Erhöhung der Genauigkeit beim Fräsen mit Industrierobotern Uhlmann, E.; Reinkober, S.; Hollerbach, T. | Journal Article |
2018 | Erhöhung der Genauigkeit beim Fräsen mit Industrierobotern durch abtriebsseitige Winkelmesssysteme Uhlmann, Eckart; Reinkober, Sascha; Hollerbach, Tobias | Journal Article |
2018 | Feinbohrspindel für die Trockenfunkenerosion Uhlmann, Eckart; Yabroudi, S.; Polte, Mitchel | Journal Article |
2018 | Finishbearbeitung technischer Oberflächen aus gehärtetem Stahl unter Verwendung von Rundbürsten mit Schleiffilamenten Hochschild, Leif : Kraft, Marc; Uhlmann, Eckart; Klocke, Fritz | Dissertation |
2018 | Fräsbearbeitung von Nickelbasislegierungen mit Industrierobotern. Reinkober, Sascha : Uhlmann, Eckart | Dissertation |
2018 | Futur 3.2018 : Uhlmann, Eckart | Journal Issue |
2018 | Grinding of high performance materials with spherical mounted points Koprowski, Stefan : Kohl, H.; Uhlmann, Eckart; Weingaertner, W.L. | Dissertation |
2018 | Helical electrodes for improved flushing conditions in drilling EDM of MAR-M247 Uhlmann, Eckart; Perfilov, Ivan; Yabroudi, S.; Schweitzer, Luiz; Polte, Mitchel | Conference Paper |
2018 | Improvement of Defect Detectability in Machine Tools Using Sensor-based Condition Monitoring Applications Demilia, G.; Gaspari, A.; Hohwieler, E.; Laghmouchi, A.; Uhlmann, E. | Journal Article, Conference Paper |
2018 | In-process quality assurance for selective laser melting through online generation of key performance indicators in context of industrie 4.0 Pastl Pontes, Rodrigo; Uhlmann, Eckart | Book Article |
2018 | Influence of cutting edge micro-geometry in micro-milling of copper alloys with reduced lead content Uhlmann, Eckart; Kuche, Yves; Polte, Julian; Polte, Mitchel | Journal Article, Conference Paper |
2018 | Influence of tilt and lead angles on 5-axis grinding with spherical mounted points Koprowski, S.; Uhlmann, E.; Weingaertner, W. | Journal Article |
2018 | Laser-Pulver-Auftragschweißen in der additiven Prozesskette für Legierungen aus dem Turbomaschinenbau Graf, Benjamin : Uhlmann, E.; Rethmeier, Michael; Schmidt, M. | Dissertation |
2018 | Machine Tool and Technology for Manufacturing of Micro-structures by Micro Dry Electrical Discharge Milling Uhlmann, E.; Perfilov, I. | Journal Article, Conference Paper |
2018 | Manufacturing and replication of sub-10 μm micro-bowls for biomedical sensor systems Uhlmann, Eckart; Hein, Christoph; Polte, Mitchel; Polte, Julian; Dähne, L. | Conference Paper |
2018 | Manufacturing of carbide tools by Selective Laser Melting Uhlmann, Eckart; Bergmann, André; Bolz, Robert | Journal Article, Conference Paper |
2018 | Methode zur Bestimmung spezifischer Kräfte durch Fräsversuche und Anwendung bei der Natursteinbearbeitung Manthei, Marcel : Kohl, H.; Uhlmann, Eckart; Denkena, B. | Dissertation |
2018 | Methodology for the in-process evaluation of software-based process failures in Selective Laser Melting machine tools Pastl Pontes, Rodrigo : Krüger, Jörg; Uhlmann, Eckart; Gomes, Oliveira | Dissertation |
2018 | Micro formed holographic security features in steel Uhlmann, Eckart; Schulze, Stephanie; Polte, Julian; Hein, Christoph; Matthiesen, Johannes; Böge, Manfred | Conference Paper |
2018 | Mikrobohren ohne flüssige Dielektrika Uhlmann, Eckart; Yabroudi, S.; Polte, Mitchel | Journal Article |
2018 | Mikrofräswerkzeuge mit Schneiden aus cBN Uhlmann, E.; Polte, J.; Polte, M.; Kuche, Y.; Wiesner, H. | Journal Article |
2018 | Neues Elektrodenkonzept verbessert Senkerodieren Streckenbach, Jan; Uhlmann, Eckart; Wolf, Cora-Sophia; Börnstein, Julian; Polte, Mitchel | Journal Article |
2018 | Numerische Prozesssimulation zur Auslegung des Druckfließläppens am Beispiel additiv gefertigter Bauteile Schmiedel, Christian : Rethmeier, Michael; Uhlmann, Eckart; Abele, Eberhard | Dissertation |
2018 | Optimization with the evolution strategy by example of electrical-discharge drilling Streckenbach, J.; Santibáñez Koref, I.; Rechenberg, I.; Uhlmann, E. | Conference Paper |
2018 | PKD-Glattdrückwerkzeuge für den Werkzeug- und Formenbau Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Guhde, Sebastian; Kuche, Yves; Kappel, Thomas | Journal Article |
2018 | Potentials and limitations of simulation based artefact correction in computed tomography Uhlmann, Eckart; Polte, Julian; Melnik, Steffen | Conference Paper |
2018 | Smoothed Particle Hydrodynamics simulation of the machining process of Inconel 718 Uhlmann, E.; Barth, E. | Journal Article, Conference Paper |
2018 | Spannutschleifen von Hartmetall-Schaftwerkzeugen mit gradierten Schleifscheiben Schröer, Nikolas : Meyer, H.J.; Uhlmann, Eckart; Biermann, Dirk | Dissertation |
2018 | Trochoide Fräsbearbeitung mit Industrierobotern Uhlmann, Eckart; Reinkober, Sascha; Hoffmann, Martin; Käpernick, Peer | Journal Article |
2018 | Trochoide Fräsbearbeitung mit Industrierobotern Uhlmann, E.; Reinkober, S.; Hoffmann, M.; Käpernick, P. | Journal Article |
2018 | Trocken und rückstandsfrei CFK bearbeiten - Hochdruckstrahlschneiden mit flüssigem CO2 Uhlmann, Eckart; John, Patrick; Reinkober, Sascha | Journal Article |
2018 | Ultrapräzisionsverfahren zur Erhöhung der Güte abbildender Beugungsgitter Kühne, Stefan : Stark, Rainer; Uhlmann, Eckart; Brinksmeier, E. | Dissertation |
2018 | Verschleißverhalten neuartiger Mikrofräswerkzeuge mit Schneiden aus CBN bei der Hartzerspanung Uhlmann, Eckart; Polte, Julian; Polte, Mitchel; Kuche, Yves; Wiesner, Hagen Maximilian | Journal Article |
2018 | Vorgehensweise zur Auslegung des Laserstrahlschmelzens am Beispiel von Wolframkarbid-Kobalt Bergmann, André : Rethmeier, Michael; Uhlmann, Eckart; Schmidt, Michael | Dissertation |
2018 | Wear behaviour of HIPIMS coated micro-miling tools with cutting edge preparation for machining steel moulds Uhlmann, Eckart; Kuche, Yves; Polte, Julian; Polte, Mitchel | Conference Paper |
2018 | Werkzeug- und prozessseitige Grundlagen des Schienenschleifens unter Berücksichtigung der Schienentemperatur und der Wechselwirkung mit dem Einsatzverhalten der Schiene Lypovka, Pavlo : Uhlmann, Eckart | Dissertation |
2017 | Accuracy of a single camera, marker based surgical navigation system - simulation and implementation Katanacho, Manuel; Krumpek, Oliver; Uhlmann, Eckart | Abstract |
2017 | Additiv gefertigte Kupferlegierungen Uhlmann, E.; Kashevko, V. | Journal Article |
2017 | Application of Spindle Speed Increaser as Sustainable Solution to Upgrade Machine Tools Uhlmann, E.; Thom, S.; Ehricke, M. | Journal Article, Conference Paper |
2017 | Assessing carbon dioxide emission reduction potentials of improved manufacturing processes using multiregional input output frameworks Ward, H.; Burger, M.; Chang, Y.-J.; Fürstmann, P.; Neugebauer, S.; Radebach, A.; Sproesser, G.; Pittner, A.; Rethmeier, M.; Uhlmann, E.; Steckel, J.C. | Journal Article |
2017 | Bürstspanen von Profilen Uhlmann, E.; Sommerfeld, C.; Renner, M.; Baumann, M. | Journal Article |
2017 | Carbon Fibre Recycling from Milling Dust for the Application in Short Fibre Reinforced Thermoplastics Uhlmann, E.; Meier, P. | Journal Article, Conference Paper |
2017 | Characterization and optimization of ultra-precision machine tools and processes by time resolved PSD signature of micro/nano structured optical surfaces Uhlmann, E.; Kühne, S.; Jagodzinski, M.; Malcher, M. | Conference Paper |
2017 | CO2-Reinigung vor dem Impulsmagnetischen Schweißen Uhlmann, E.; Drieux, S.; Jaczkowski, R. | Journal Article |
2017 | Contribution to a database of Ti-6Al-4V components manufactured with selective laser melting process Uhlmann, Eckart; Bergmann, André; Gridin, Witalij; Rolon, Daniel Alexandre | Conference Paper |
2017 | Cutting forces while machining STAVAX ESU with binderless-cBN Uhlmann, E.; Oberschmidt, D.; Polte, J.; Polte, M. | Conference Paper |
2017 | Cutting Simulation with Consideration of the Material Hardening in the Shear Zone of AISI1045 Uhlmann, E.; Henze, S.; Brömmelhoff, K.; Reimers, W. | Journal Article, Conference Paper |
2017 | Decentralized data analytics for maintenance in industrie 4.0 Uhlmann, Eckart; Laghmouchi, Abdelhakim; Geisert, Claudio; Hohwieler, Eckhard | Journal Article, Conference Paper |
2017 | Depth map based point cloud registration to CT patient data for surgical navigation Katanacho, Manuel; Lack, John-Certus; Hoffmann, Jonas; Uhlmann, Eckart | Conference Paper |
2017 | Die-Sinking EDM of high aspect ratio cavities in nickel-base alloy Domingos, David Carlos : Uhlmann, Eckart | Dissertation |
2017 | Droplet removal from PVD-coated micro-milling tools with the immersed tumbling process Uhlmann, E.; Kuche, Y.; Oberschmidt, D.; Polte, J. | Conference Paper |
2017 | Dry-EDM milling of micro-scale features with high speed rotating tungsten tube electrodes Uhlmann, E.; Perfilov, I.; Schimmelpfennig, T.-M.; Schweitzer, L.; Yabroudi, S. | Conference Paper |
2017 | Dynamical Fatigue Behavior of Additive Manufactured Products For a Fundamental Life cycle Approach Uhlmann, E.; Fleck, C.; Gerlitzky, G.; Faltin, F. | Journal Article, Conference Paper |
2017 | Einflussfaktoren der Reinigung mit flüssigem Kohlendioxid auf fertigungsrelevante Materialeigenschaften medizintechnischer Kunststoffe Mankiewicz, Johannes : Uhlmann, Eckart | Dissertation |
2017 | Einsatz von CFK-Fräspartikeln als Füllstoff Uhlmann, E.; Meier, P. | Journal Article |
2017 | Einsatzverhalten nanocomposite-beschichteter PcBN-Werkzeuge für die Hartdrehbearbeitung. Oyanedel Fuentes, Javier Alejandro : Uhlmann, Eckart (Hrsg.) | Dissertation |
2017 | Energieautarke Kühlung von Lineardirektantrieben Uhlmann, E.; Salein, S. | Journal Article |
2017 | Fräsen partikelverstärkter Titanmatrix-Verbundwerkstoffe Uhlmann, E.; Kaulfersch, F. | Journal Article |
2017 | Fräsen von Titanmatrix-Verbundwerkstoffen Uhlmann, E.; Kaulfersch, F.F. | Journal Article |
2017 | Herstellung und Einsatz von PKD-Mikrofräswerkzeugen Polte, Mitchel : Uhlmann, Eckart | Dissertation |
2017 | Hypothetical sustainability axioms for axiomatic design with an application in grinding machine design Garretson, I.C.; Linke, B.S.; Peukert, B.; Uhlmann, E. | Conference Paper |
2017 | Influence of Procedure-Related Cutting Edge Micro Geometry Modification on the Production Quality When Milling Fibre Reinforced Plastics Uhlmann, E.; Stawiszynski, B.; Protz, F.; Prasol, L. | Journal Article |
2017 | Innovativer Fräsroboter mit Direktantrieben Uhlmann, E.; Reinkober, S.; Stürmer, Philipp Sven von; Hansmann, J.; Epping, M. | Journal Article |
2017 | Instrument calibration for a camera based surgical navigation system Katanacho, Manuel; Krumpek, Oliver; Uhlmann, Eckart; Melnik, Steffen | Abstract |
2017 | Intelligent pattern recognition of a SLM machine process and sensor data Uhlmann, E.; Pontes, R.P.; Laghmouchi, A.; Bergmann, A. | Journal Article, Conference Paper |
2017 | Intelligent pattern recognition of SLM machine energy data Uhlmann, E.; Pastl Pontes, R.; Laghmouchi, A.; Hohwieler, E.; Feitscher, R. | Journal Article |
2017 | Intelligent production systems in the era of industrie 4.0 - changing mindsets and business models Uhlmann, E.; Hohwieler, E.; Geisert, C. | Journal Article |
2017 | Kantenpräparation durch Formschleifprozesse Uhlmann, E.; Bruckhoff, J. | Journal Article |
2017 | Kinematisch modulierte Schleifprozesse zur Strukturierung von tribologisch beanspruchten Funktionsoberflächen Bäcker, Clemens : Göhlich, D.; Uhlmann, E.; Karpuschewski, B. | Dissertation |
2017 | Kubisch-kristallines Bornitrid ohne Bindephase als Schneidstoff in der Ultrapräzisions-Zerspanung Polte, Julian : Uhlmann, Eckart | Book |
2017 | Liquid covered micro-milling Uhlmann, E.; Oberschmidt, D.; Polte, M.; Polte, J. | Conference Paper |
2017 | Low-dimensional time-discrete models for high dynamic machine tools Uhlmann, E.; Reis, T.; Oberschmidt, D.; Rendel, O.; Guhde, S. | Conference Paper |
2017 | Manufacturing of CVD diamond micro-end mills with electrical discharge machining Uhlmann, E.; Oberschmidt, D.; Polte, M.; Polte, J.; Schimmelpfennig, T.-M.; Börnstein, J. | Conference Paper |
2017 | Measurement of in-mould shear rates by x-ray particle image velocimetry Uhlmann, E.; Hein, C.; Oberschmidt, D. | Conference Paper |
2017 | Modeling and Analysis of Contact Conditions during NC-Form Grinding of Cutting Edges Uhlmann, E.; Bruckhoff, J. | Journal Article |
2017 | Modeling approach regarding surface functionalization by force-controlled micro and nano forming Uhlmann, E.; Kühne, S.; Jagodzinski, M.; Malcher, M.; Trevino, R. | Conference Paper |
2017 | Precision enhancement technologies for multi-axis ultra precision machining of freeform optical elements with variable micro/nano structures Uhlmann, E.; Kühne, S.; Jagodzinski, M.; Widemann, R.; Haskic, K. | Conference Paper |
2017 | Probabilities in safety of machinery - risk reduction through fixed and moveable guards by standardized impact tests, part 1: Applications and consideration of random effects Landi, L.; Mödden, H.; Pera, F.; Uhlmann, E.; Meister, F. | Conference Paper |
2017 | Probabilities in safety of machinery - risk reduction through fixed and moveable guards by standardized impact tests, part 2: Possible improvements with FE impact simulations Landi, L.; Uhlmann, E.; Meister, F.; Pera, F.; Mödden, H. | Conference Paper |
2017 | Region of interest detection with iterative colour clustering and a global weighting scheme Katanacho, Manuel; Hoffmann, Jonas; Uhlmann, Eckart | Abstract |
2017 | Shortened manufacturing of individualized carbide tools by selective laser melting and hot isostatic pressing Uhlmann, Eckart; Bergmann, André; Gridin, Witalij | Conference Paper |
2017 | Simulationsmodell als Basis zur Ableitung von Zerspanstrategien zur Reduzierung von thermischen Bearbeitungseinflüssen beim Hartdrehen Ivanov, Ivan Mitkov : Uhlmann, Eckardt | Dissertation |
2017 | Smart life cycle monitoring for sustainable maintenance and production Uhlmann, Eckart; Pastl Pontes, Rodrigo; Laghmouchi, Abdelhakim; Geisert, Claudio; Hohwieler, Eckhard | Journal Article, Conference Paper |
2017 | Smart wireless sensor network and configuration of algorithms for condition monitoring applications Uhlmann, E.; Laghmouchi, A.; Geisert, C.; Hohwieler, E. | Journal Article |
2017 | Spanende Bearbeitung von Faserverbundkunststoffen Uhlmann, E.; Christiansen, G. | Journal Article |
2017 | Steigerung des Formänderungsvermögens der Magnesiumlegierung AZ31 bei Raumtemperatur unter Nutzung der elektro-magnetischen Umformung Prasol, Lukas : Uhlmann, Eckart | Dissertation |
2017 | Substitution of Coolant by Using a Closed Internally Cooled Milling Tool Uhlmann, E.; Riemer, H.; Schröter, D.; Sammler, F.; Richarz, S. | Journal Article, Conference Paper |
2017 | Sustainable Solutions for Machine Tools Uhlmann, Eckart; Lang, Klaus-Dieter; Prasol, Lukas; Thom, Simon; Peukert, Bernd; Benecke, Stephan; Wagner, Eduard; Sammler, Fiona; Richarz, Sebastian; Nissen, Nils F. | Book Article |
2017 | Trockeneisstrahlen als Vorbehandlungsverfahren vor dem Galvanisieren Baira, El Mustapha : Uhlmann, E.; Jochem, R.; Kohl, H.; Krüger, J.; Rethmeier, M.; Seliger, G.; Stark, R. | Dissertation |
2017 | Ultrasonic Assisted Milling of Reinforced Plastics Uhlmann, E.; Protz, F.; Stawiszynski, B.; Heidler, S. | Journal Article, Conference Paper |
2017 | Untersuchungen zur Messunsicherheit und Wirtschaftlichkeit dimensioneller Computertomographie-Messungen an ausgewählten Beispielen Hiller, Jochen; Sawczyn, Nikolas; Imkamp, Dietrich; Uhlmann, Eckart | Journal Article |
2017 | Verfahren, Anordnung und Computerprogrammprodukt zur Lageerfassung eines zu untersuchenden Objektes Engel, Sebastian; Katanacho, Manuel; Keeve, Erwin; Uhlmann, Eckart | Patent |
2017 | Verschleiß an Gleitschleifkörpern Uhlmann, E.; Eulitz, A.; Männel, C. | Journal Article |
2017 | Vibrationsunterstützte Senkerosion. Senkerosive Fertigung von Dichtschlitzen in einer Nickelbasislegierung mit Vibrationsunterstützung Uhlmann, E.; Domingos, C.D.; Yabroudi, S.; Bolz, R. | Journal Article |
2017 | Wear behaviour of diamond coated micro-milling tools during micro machining Uhlmann, E.; Kuche, Y.; Oberschmidt, D.; Polte, J. | Conference Paper |
2017 | Wear performance of diamond coated WC-Co tools with a CrN interlayer Chandran, M.; Sammler, F.; Uhlmann, E.; Akhvlediani, R.; Hoffman, A. | Journal Article |
2017 | Zeitdiskretes echtzeitfähiges Berechnungsmodell Uhlmann, E.; Reis, T.; Rendel, O.; Guhde, S. | Journal Article |
2016 | 11. Berliner Runde - Neue Konzepte für Werkzeugmaschinen 2016. Begleitband : Uhlmann, Eckart (Hrsg.) | Conference Proceedings |
2016 | Abrasive waterjet turning of titanium alluminides Uhlmann, E.; Faltin, F.; Flögel, K. | Conference Paper |
2016 | Add-on Error Compensation Unit as Sustainable Solution for Outdated Milling Machines Kianinejad, K.; Thom, S.; Kushwaha, S.; Uhlmann, E. | Journal Article, Conference Paper |
2016 | Additive Fertigung von Nickelbasis-Superlegierungen mittels Laserstrahlschmelzen am Beispiel von Diamalloy 4004NS König-Urban, Kamilla : Uhlmann, Eckart | Dissertation |
2016 | Agentenbasierte Automatisierung des Betriebs Industrieller Produkt-Service Systeme Raue, Niels : Kohl, H.; Uhlmann, Eckart; Meier, H. | Dissertation |
2016 | Antireflection coating of microstructures by anodizing and influence on the dimensional accuracy of structures Uhlmann, E.; Kühne, S.; Malcher, M.; Jagodzinski, M. | Conference Paper |
2016 | Automated dressing of graphite electrodes for electrical discharge machining (EDM) of seal slots in turbine components Uhlmann, E.; Domingos, D.C. | Journal Article, Conference Paper |
2016 | Automated Vendor Selection for Industrial Service Shares Uhlmann, E.; Sawczyn, N.; Raue, N.; Gabriel, C. | Journal Article, Conference Paper |
2016 | CBN-micro-milling tools for machining hardened steel moulds Uhlmann, E.; Oberschmidt, D.; Polte, M.; Polte, J.; Börnstein, J. | Conference Paper |
2016 | CO2-Schneeentstehung und deren Wirkung auf die Effekte beim CO2-Schneestrahlen Kretzschmar, Michael : Rethmeier, M.; Uhlmann, Eckart; Weidner, E. | Dissertation |
2016 | Comparative analysis of dry-EDM and conventional EDM for the manufacturing of micro holes in Si3N4-TiN Uhlmann, E.; Schimmelpfennig, T.-M.; Perfilov, I.; Streckenbach, J.; Schweitzer, L. | Conference Paper, Journal Article |
2016 | Contactless fault isolation for FinFET technologies with visible light and GaP SIL Lohrke, H.; Scholz, P.; Beyreuther, A.; Ganesh, U.; Uhlmann, E.; Kuhne, S.; Jagodzinski, M.; Iwaki, Y.; Chivas, R.; Silverman, S.; Boit, C. | Conference Paper |
2016 | Critical depth of cut and asymptotic spindle speed for chatter in micro milling with process damping Wang, J.J.; Uhlmann, E.; Oberschmidt, D.; Sung, C.F.; Perfilov, I. | Journal Article |
2016 | Definiertes Kantenrunden durch Strömungsschleifen Uhlmann, E.; Roßkamp, S. | Journal Article |
2016 | Digitalisierte Produktion - Potentiale für eine nachhaltige urbane Wertschöpfung. Vorträge, Proceedings : Uhlmann, Eckart (Hrsg.) | Conference Proceedings |
2016 | Dressing of graphite electrodes for EDM of seal slots in nickel-base alloy MAR-M247 Uhlmann, E.; Domingos, D.C. | Conference Paper, Journal Article |
2016 | Dry ice blasting as a substitution for the conventional electroplating pre-treatments Uhlmann, E.; Baira, E.M.; Jaczkowski, R. | Journal Article |
2016 | Effect of cooling lubricant on surface roughness for turning stainless steel with binderless-cBN Uhlmann, E.; Oberschmidt, D.; Polte, J.; Polte, M.; Huth-Herms, K. | Conference Paper |
2016 | Effects of different cutting edge preparation methods on micro milling performance Uhlmann, E.; Oberschmidt, D.; Kuche, Y.; Löwenstein, A.; Winker, I. | Conference Paper, Journal Article |
2016 | Einfluss von Herstellungs- und Lagerungsfaktoren auf die Eigenschaften von Trockeneispellets und das Strahlergebnis Motschmann, Simon : Uhlmann, Eckart | Dissertation |
2016 | Energieeffiziente Nutzung von Industrierobotern für die Bearbeitung Uhlmann, E.; Reinkober, S.; Mohnke, C. | Journal Article |
2016 | Energy efficient usage of industrial robots for machining processes Uhlmann, E.; Reinkober, S.; Hollerbach, T. | Conference Paper, Journal Article |
2016 | Entwicklung und Einsatz eines geschlossen-innengekühlten Fräswerkzeugs Uhlmann, E.; Riemer, H.; Schröter, D. | Journal Article |
2016 | Flexible, robot guided single-pass honing Uhlmann, E.; Zimmermann, S. | Conference Paper |
2016 | Fräsbearbeitung hochabrasiver Mineralgusswerkstoffe Uhlmann, E.; Kaulfersch, F. | Journal Article |
2016 | Geometric deviations in the production of micro-milling tools and their influence on the cutting process Uhlmann, E.; Oberschmidt, D.; Kuche, Y.; Polte, M. | Conference Paper |
2016 | Gleitschleifen - Verfahrensgrundlagen und Prozessmodellierung Dethlefs, Arne : Uhlmann, Eckart | Dissertation |
2016 | Hard Turning of Hot Work and Cold Work Steels with HiPIMS and DCMS TiAlN Coated Carbide Inserts Uhlmann, E.; Stawiszynski, B.; Leyens, C.; Heinze, S.; Sammler, F. | Journal Article, Conference Paper |
2016 | Herstellung und Einsatz von Wendeltiefbohrern zur Hartbearbeitung Richarz, Sebastian : Uhlmann, Eckart | Dissertation |
2016 | High level process map for Selective Laser Melting Uhlmann, Eckart; Pastl Pontes, Rodrigo; Bergmann, André | Conference Paper |
2016 | High precision milling with a novel compliant machine tool Uhlmann, E.; Oberschmidt, D.; Guhde, S.; Polte, M. | Conference Paper |
2016 | High-pressure jet cutting with liquid CO2 Uhlmann, E.; John, P. | Conference Paper |
2016 | Hochharte Schleifscheiben als 4-Stoffsystem Uhlmann, E.; Thalau, J. | Journal Article |
2016 | Individuelle Fertigung durch den Einsatz von Industrierobotern Uhlmann, E.; Reinkober, S.; Mohnke, C. | Journal Article |
2016 | Influence of cutting edge preparation on the performance of micro milling tools Uhlmann, E.; Oberschmidt, D.; Löwenstein, A.; Kuche, Y. | Conference Paper, Journal Article |
2016 | Influence of rail grinding process parameters on rail surface roughness and surface layer hardness Uhlmann, E.; Lypovka, P.; Hochschild, L.; Schröer, N. | Journal Article |
2016 | Influence of the rake angle on the surface formation during micro shaping of submicron optical structures in Au-layers Uhlmann, E.; Kühne, S.; Jagodzinski, M. | Conference Paper |
2016 | Innovativer Fräsroboter für Großstrukturen Uhlmann, E.; Reinkober, S.; Epping, M. | Journal Article |
2016 | Intelligentes Elektroniksystem für Condition Monitoring in Industrie 4.0 Uhlmann, E.; Laghmouchi, A.; Ehrenpfordt, R.; Hohwieler, E.; Geisert, C. | Journal Article |
2016 | Investigations on vibration-assisted EDM-machining of seal slots in high-temperature resistant materials for turbine components. Part II Uhlmann, E.; Domingos, D.C. | Conference Paper, Journal Article |
2016 | Konzepte zur energieautarken Kühlung von Lineardirektantrieben Uhlmann, E.; Salein, S. | Journal Article |
2016 | Kundenindividuelle Produktion durch intelligente Vernetzung Uhlmann, E. | Journal Article |
2016 | Machining of Carbon and Glass Fibre Reinforced Composites Uhlmann, E.; Sammler, F.; Richarz, S.; Reucher, G.; Hufschmied, R.; Frank, A.; Stawiszynski, B.; Protz, F. | Journal Article, Conference Paper |
2016 | Machining of hygroscopic materials by high-pressure CO2 jet cutting Uhlmann, E.; Bilz, M.; Mankiewicz, J.; Motschmann, S.; John, P. | Conference Paper, Journal Article |
2016 | Manufacturing, replication and assessment of microfluidics for blood plasma separation Uhlmann, Eckart; Hein, Christoph; Polte, Mitchel; Polte, Julian; Spielvogel, Anja; Huth-Herms, Katrin; Oberschmidt, Dirk | Conference Paper |
2016 | Mikro- und Makrozerspanung von PM-Stählen Uhlmann, Eckart; Richarz, Sebastian; Oberschmidt, Dirk | Conference Paper |
2016 | Modellbasierte Prozessoptimierung für das Mikrofräsen Mahr, Frederik Felix : Uhlmann, Eckart | Dissertation |
2016 | Modelling and simulation of grinding processes with mounted points. Part I of II Uhlmann, E.; Koprowski, S.; Weingaertner, W.L.; Rolon, D.A. | Conference Paper, Journal Article |
2016 | Modelling and simulation of grinding processes with mounted points. Part II of II Uhlmann, E.; Koprowski, S.; Weingaertner, W.L.; Rolon, D.A. | Conference Paper, Journal Article |
2016 | Niedrigdimensionale Modelle zur Simulation des dynamischen Verhaltens von Werkzeugmaschinen unter Berücksichtigung der Pose Wintering, Jens Hermann : Uhlmann, Eckart | Dissertation |
2016 | A novel excitation method for pyroshock simulation Houshmand, B.; Lacher, A.; Juengel, N.; Prasol, L.; Wagner, U. von; Uhlmann, E. | Journal Article |
2016 | Open Source CNC-Maschinensteuerung für die Trockenfunkenbahnerosion Uhlmann, E.; Perfilov, I.; Schimmelpfennig, T.-M. | Journal Article |
2016 | A Pragmatic Modeling Approach in Abrasive Flow Machining for Complex-Shaped Automotive Components Uhlmann, E.; Mihotovic, V.; Roßkamp, S.; Dethlefs, A. | Journal Article, Conference Paper |
2016 | Principles for Interconnection of Modular Machine Tool Frames Uhlmann, E.; Saoji, M.; Peukert, B. | Journal Article, Conference Paper |
2016 | Process Behaviour of Super-hard Cutting Materials for Machining Mineral Cast Uhlmann, E.; Kaulfersch, F. | Journal Article, Conference Paper |
2016 | Process chains for high-precision components with micro-scale features Uhlmann, E.; Mullany, B.; Biermann, D.; Rajurkar, K.P.; Hausotte, T.; Brinksmeier, E. | Journal Article |
2016 | Prozessauslegung zum Schnellhubschleifen von Hochleistungskeramik Sammler, Christoph : Uhlmann, Eckardt | Dissertation |
2016 | Prozessmodell für selektives Laserstrahlschmelzen Uhlmann, E.; Pastl Pontes, R.; Bergmann, A. | Journal Article |
2016 | Situation adapted field service support using business process models and ICT based human-machine-interaction Uhlmann, E.; Geisert, C.; Raue, N.; Gabriel, C. | Journal Article, Conference Paper |
2016 | Solutions for sustainable machining Uhlmann, E.; Peukert, B.; Thom, S.; Prasol, L.; Fürstmann, P.; Sammler, F.; Richarz, S. | Conference Paper |
2016 | Stellgrößen beim Doppelseitenplanschleifen mit Planetenkinematik Uhlmann, E.; List, M.; Lichtschlag, L. | Journal Article |
2016 | Strahlschneiden mit flüssigem CO2 als Strahlmedium Uhlmann, E.; John, P.; Mankiewicz, J. | Journal Article |
2016 | Surface reproduction accuracy of holographic design features for machine components fabricated by a combination of TiN-physical vapour deposition and a specific subsequent galvanic process Uhlmann, Eckart; Oberschmidt, Dirk; Frenzel, Stephanie; Polte, Julian; Matthiesen, Johannes; Böge, Manfred | Conference Paper |
2016 | Trockenfunkenerosives Feinbohren von Hochleistungswerkstoffen Schimmelpfennig, Tassilo-Maria : Uhlmann, Eckart | Dissertation |
2016 | Twisted deep hole drilling tools for hard machining Uhlmann, E.; Richarz, S. | Journal Article |
2016 | Utilization of Thermal Energy to Compensate Quasi-static Deformations in Modular Machine Tool Frames Uhlmann, E.; Saoji, M.; Peukert, B. | Journal Article, Conference Paper |
2016 | Werkzeugschleifen mit Hybridschleifscheiben Uhlmann, E.; Schröer, N. | Journal Article |
2016 | Zustandsüberwachung in der Cloud Uhlmann, E.; Laghmouchi, A.; Hohwieler, E.; Geisert, C. | Journal Article |
2015 | Additive manufacturing of titanium alloy for aircraft components Uhlmann, E.; Kersting, R.; Klein, T.B.; Cruz, M.F.; Borille, A.V. | Journal Article, Conference Paper |
2015 | Addressing sustainability and flexibility in manufacturing via smart modular machine tool frames to support sustainable value creation Peukert, B.; Benecke, S.; Clavell, J.; Neugebauer, S.; Nissen, N.F.; Uhlmann, E.; Lang, K.-D.; Finkbeiner, M. | Journal Article, Conference Paper |
2015 | Advances in Tool Grinding and Development of End Mills for Machining of Fibre Reinforced Plastics Uhlmann, E.; Schröer, N. | Journal Article, Conference Paper |
2015 | An Automation Approach Based on Workflows and Software Agents for Industrial Product-Service Systems Uhlmann, E.; Gabriel, C.; Raue, N. | Journal Article, Conference Paper |
2015 | Automatisierte Qualitätskontrolle Uhlmann, E.; Oberschmidt, D.; Löwenstein, A.; Kuche, Y.; Wiemann, S. | Journal Article |
2015 | Beeinflussung des Wasserabrasivstrahls Uhlmann, E.; Flögel, K.; Dahlmann, M. | Journal Article |
2015 | Binderless-PCD as cutting material for micro milling of cemented carbide moulds Uhlmann, Eckart; Oberschmidt, Dirk; Löwenstein, Armin; Polte, Julian; Gonia, D. | Conference Paper |
2015 | Blasting with solid carbon dioxide: Investigation of thermal and mechanical removal mechanisms Uhlmann, E.; Hollan, R. | Journal Article, Conference Paper |
2015 | Blendensystem für eine Strahlenquelle sowie Vorrichtung und Verfahren zum Aufnehmen eines Projektionsbilds und zum Bestimmen einer Relativposition zwischen einer Strahlenquelle und einem Strahlendetektor Keeve, Erwin; Engel, Sebastian; Stopp, Fabian; Uhlmann, Eckart; Käseberg, Marc | Patent |
2015 | Chapter 4: Micro-electrical Discharge Machining Uhlmann, E.; Röhner, M.; Langmack, M.; Schimmelpfennig, T.-M. | Book Article |
2015 | A chemical consideration of binderless-cBN as cutting material for ultra-precision turning Uhlmann, Eckart; Sturm, H.; Oberschmidt, Dirk; Polte, Julian; Polte, Mitchel; Lorenz, D.; Frenzel, S. | Conference Paper |
2015 | Comparison of conventional and dry electrical discharge machining Schimmelpfennig, Tassilo-Maria; Perfilov, Ivan; Streckenbach, Jan; Uhlmann, Eckart | Conference Paper |
2015 | Condition monitoring in the cloud Uhlmann, E.; Laghmouchi, A.; Hohwieler, E.; Geisert, C. | Journal Article, Conference Paper |
2015 | CPS-basiertes Life Cycle Monitoring und Management Uhlmann, E.; Laghmouchi, A.; Geisert, C. | Journal Article |
2015 | Cutting of steel X13NiMnCuAl4-2-1-1 with micro milling tools using a defined cutting edge preparation Uhlmann, Eckart; Oberschmidt, Dirk; Löwenstein, Armin; Kuche, Y.; Winker, I. | Conference Paper |
2015 | Development and optimization of process chains for the micro mold industry: Technological limits of the micro milling and micro die-sinking EDM technologies Uhlmann, Eckart; Domingos, David C.; Kühne, S.; Zanatta, A.M.; Gomes, J.O. | Conference Paper |
2015 | Discrete Element Modelling of Drag Finishing Uhlmann, E.; Eulitz, A.; Dethlefs, A. | Journal Article, Conference Paper |
2015 | Dry ice blasting instead of bating Uhlmann, E.; Baira, E.M. | Journal Article |
2015 | Einsatz von Bor-dotierten Diamanten beim sensorintegrierten UP-Diamantdrehen Uhlmann, Eckart; Oberschmidt, Dirk; Frenzel, Stephanie; Polte, Julian | Journal Article |
2015 | Einsatzverhalten von Schleifbändern mit hochharten Schleifmitteln Heitmüller, Florian : Uhlmann, Eckart | Dissertation |
2015 | Entwicklung einer Herstellungstechnologie für PKD-Mikrofräswerkzeuge Uhlmann, E.; Oberschmidt, D.; Polte, M.; Börnstein, J. | Journal Article |
2015 | Entwicklung eines aktiven Kompensationstisches Uhlmann, E.; Thom, S.; Kianinejad, K.; Kushwaha, S.; Rathenow, P. | Journal Article |
2015 | Entwicklungstool zur Konfiguration und Verknüpfung von Condition Monitoring-Algorithmen Uhlmann, Eckart; Laghmouchi, Abdelhakim | Journal Article |
2015 | Erhöhen der Dämpfung hohler Leichtbaustrukturen Uhlmann, E.; Peukert, B. | Journal Article |
2015 | An Evaluation of Building Sets Designed for Modular Machine Tool Structures to Support Sustainable Manufacturing Peukert, B.; Saoji, M.; Uhlmann, E. | Journal Article, Conference Paper |
2015 | Evaluation of different approaches for modeling phase transformations in machining simulation Schulze, V.; Uhlmann, E.; Mahnken, R.; Menzel, A.; Biermann, D.; Zabel, A.; Bollig, P.; Ivanov, I.M.; Cheng, C.; Holtermann, R.; Bartel, T. | Journal Article |
2015 | Flexible manufacturing with an additive process chain. Design, production and surface finish Uhlmann, Eckart; Rethmeier, Michael; Graf, Benjamin; Kersting, Robert; Bergmann, André | Conference Paper |
2015 | Flexible, robot guided single-pass honing Uhlmann, E.; Zimmermann, S. | Journal Article |
2015 | Industrie 4.0: Perspektive für Deutschland Uhlmann, E. | Journal Article |
2015 | Influence of the Built-up Edge on the Stress State in the Chip Formation Zone During Orthogonal Cutting of AISI1045 Uhlmann, E.; Henze, S.; Brömmelhoff, K. | Journal Article, Conference Paper |
2015 | Influence of track gringing process on rail surface and subsurface topology Uhlmann, E.; Lypovka, P. | Journal Article, Conference Paper |
2015 | Innovative high-performance ceramics – Challenge for the life cycle engineering of turbomachinery Uhlmann, E.; Bilz, M.; Baumgarten, J.; Klein, T.B. | Conference Paper, Journal Article |
2015 | Intelligent configuration of condition monitoring algorithms Laghmouchi, Abdelhakim; Hohwieler, Eckhard; Geisert, Claudio; Uhlmann, Eckart | Conference Paper |
2015 | Intelligente Werkstattfertigung: Steuerung von Serienprodukten für die Werkstattfertigung mit Industrie 4.0-Lösungen Uhlmann, E.; Schallock, B.; Otto, F. | Journal Article |
2015 | Investigation into Energy Efficiency of Outdated Cutting Machine Tools and Identification of Improvement Potentials to Promote Sustainability Kianinejad, K.; Uhlmann, E.; Peukert, B. | Journal Article, Conference Paper |
2015 | Investigation on additive manufacturing of tungsten Carbide-cobalt by selective laser melting Uhlmann, E.; Bergmann, A.; Gridin, W. | Journal Article, Conference Paper |
2015 | Keramische Schaftfräswerkzeuge für die Hochgeschwindigkeitsbearbeitung von Nickelbasis-Legierungen Wacinski, Manuel : Uhlmann, Eckart | Dissertation |
2015 | Laserwendel- und funkenerosives Mikrobohren Langmack, Malte : Uhlmann, E. | Dissertation |
2015 | Maintenance, repair and overhaul in through-life engineering services Uhlmann, Eckart; Stark, Rainer; Rethmeier, Michael; Baumgarten, Jeannette; Bilz, Martin; Geister, Claudio; Graf, Benjamin; Gumenyuk, Andrey; Grosser, Hendrik; Heitmüller, Florian; Manthei, Marcel; Reinkober, Sascha | Book Article |
2015 | Methode zur Entwicklung von Geschäftsprozessen Industrieller Produkt-Service Systeme mit Prozess-Fraktalen Gabriel, Christian : Uhlmann, E. (Hrsg.) | Dissertation |
2015 | Mikrozerspanung von rostfreiem Stahl mit PcBNoB Uhlmann, E.; Oberschmidt, D.; Polte, J. | Journal Article |
2015 | A multi-mechanism model for cutting simulations based on the concept of generalized stresses Cheng, C.; Mahnken, R.; Ivanov, I.M.; Uhlmann, E. | Conference Paper |
2015 | Neuartige Beschichtungen für die Drehbearbeitung Uhlmann, Eckart; Leyens, Christoph; Gäbler, Jan; Stawiszynski, Bartek; Oyanedel Fuentes, Javier A.; Heinze, Stefan | Journal Article |
2015 | New machine tool concept for two-side ultra-precision machining Uhlmann, Eckart; Oberschmidt, Dirk; Polte, Julian; Polte, Mitchel; Guhde, S. | Conference Paper |
2015 | A Novel Finite Element Approach to Modeling Hard Turning in Due Consideration of the Viscoplastic Asymmetry Effect Uhlmann, E.; Mahnken, R.; Ivanov, I.M.; Cheng, C. | Journal Article, Conference Paper |
2015 | A Novel Method for Specimen Preparation and Analysis of CVD Diamond Coated Tools Using Focussed Ion Beams (FIB) and Scanning Electron Microscopy (SEM) Berger, D.; Uhlmann, E.; Dethlefs, I. | Journal Article |
2015 | Oberflächennachbearbeiten eines SLM-Ventils mit Tauchgleitläppen Uhlmann, Eckart; Löwenstein, Armin; Bergmann, Andre | Journal Article |
2015 | Optimierte Werkzeugbahnen für die Schleifbearbeitung von Hochleistungskeramik mit Schleifstiften Uhlmann, E.; Bruckhoff, J. | Journal Article |
2015 | Optimierung eines Maschinengestells von kleinen Werkzeugmaschinen für kleine Werkstücke Perfilov, Ivan; Streckenbach, Jan; Schweitzer, Luiz; Uhlmann, Eckart | Conference Paper |
2015 | Optimized CO2 snow blasting systems Uhlmann, E.; Kretzschmar, M. | Journal Article |
2015 | Process development and optimization in the die-sinking μ-EDM of micro molds for the dental industry Uhlmann, Eckart; Domingos, David C.; Oberschmidt, Dirk; Zanatta, A.M.; Gomes, J.O. | Conference Paper |
2015 | Prozessstrategien beim NC-Formschleifen mit Schleifstiften Borsoi Klein, Tiago : Uhlmann, Eckart | Dissertation |
2015 | Quality optimized additive manufacturing through measuring system analysis Uhlmann, E.; John, P.; Kashevko, V.; Gerlitzky, G.; Bergmann, A. | Conference Paper |
2015 | Schichthaftungsprüfung von CVD-Dünnschichtdiamantwerkzeugen mit Siliziumcarbid-Zwischenschicht Henze, S.; Gäbler, J.; Uhlmann, E. | Journal Article |
2015 | Schneidkantenpräparation von VHM-Mikrofräsern Uhlmann, E.; Oberschmidt, D.; Löwenstein, A.; Polte, M.; Winker, I. | Journal Article |
2015 | Shock welding: Process variants and measuring procedures for assessing the welding quality Ziefle, A.; Uhlmann, E. | Journal Article |
2015 | Situationsangepasste Unterstützung von Dienstleistungsprozessen Uhlmann, E.; Geisert, C.; Raue, N.; Gabriel, C. | Journal Article |
2015 | Steigerung der Nutzungspotenziale von CVD-diamantbeschichteten Werkzeugen Sammler, Fiona : Uhlmann, Eckart | Dissertation |
2015 | Strahlendetektor zum Detektieren einer Strahlung, Aufnahmevorrichtung und Verfahren zum Abbilden eines Zielvolumens und zum Bestimmen eines Scanzentrums innerhalb des Zielvolumens Keeve, Erwin; Engel, Sebastian; Fehlhaber, Felix; Uhlmann, Eckart | Patent |
2015 | Study on additive manufacturing of inner contoured tools Uhlmann, E.; Bergmann, A.; Gridin, W. | Conference Paper |
2015 | Surface structuring of tooth flanks Uhlmann, E.; Bäcker, C. | Journal Article |
2015 | Two-axis vibration system for targeted influencing of micro-milling Uhlmann, Eckart; Perfilov, Ivan; Oberschmidt, Dirk | Conference Paper |
2015 | Untersuchung des Einflusses von Dreh-, Drehfräs-, Glattwalz- sowie Schleifprozessen auf das tribologische Einsatzverhalten von Stahl am Beispiel des Rad-Schiene-Kontakts Gebhard, Stefan : Stark, Rainer; Uhlmann, Eckart; Klocke, Fritz | Dissertation |
2015 | Verfahren und Vorrichtung zum Aufnehmen eines zu untersuchenden Objektes Keeve, Erwin; Käseberg, Marc; Melnik, Steffen; Uhlmann, Eckart; Stopp, Fabian | Patent |
2015 | Verfahren zur mechanischen Erzeugung periodischer nanooptischer Strukturen mit monokristallinen Diamantwerkzeugen am Beispiel von Blazegittern Haskic, Kurt : Uhlmann, E. | Dissertation |
2015 | Wear of abrasive media and its effect on abrasive flow machining results Bremerstein, Tina; Potthoff, Annegret; Michaelis, Alexander; Schmiedel, Christian; Uhlmann, Eckart; Blug, Bernhard; Amann, Tobias | Journal Article |
2014 | Abrasives Bürsten. Funktionsflächen flexibel finishen Uhlmann, E.; Lypovka, P.; Sommerfeld, C.; Bäcker, C.; Dethlefs, A.; Hochschild, L. | Journal Article |
2014 | Advanced machining processes for CFRP Rieck, I.; Uhlmann, E. | Conference Paper |
2014 | Besser mikrofräsen mit gezielten Schwingungen Uhlmann, E.; Oberschmidt, D.; Mahr, F.; Perfilov, I. | Journal Article |
2014 | Bildgebendes System, Operationsvorrichtung mit dem bildgebenden System und Verfahren zur Bildgebung Winne, Christian; Engel, Sebastian; Keeve, Erwin; Uhlmann, Eckart | Patent |
2014 | Binderless-cBN as cutting material for ultra-precision machining of stainless steel Polte, Julian; Polte, Mitchel; Lorenz, David; Oberschmidt, Dirk; Sturm, Heinz; Uhlmann, Eckart | Conference Paper |
2014 | Binderless-cBN for micro machining Polte, Mitchel; Lorenz, David; Polte, Julian; Uhlmann, Eckart; Oberschmidt, Dirk | Conference Paper |
2014 | Computertomographie für die Instandhaltung elektronischer Komponenten Uhlmann, E.; Oberschmidt, D.; Löwenstein, A.; Sawczyn, N. | Conference Paper |
2014 | Cutting edge preparation of micro milling tools Uhlmann, E.; Oberschmidt, D.; Kuche, Y.; Löwenstein, A. | Journal Article, Conference Paper |
2014 | Dry and residue-free cutting with high-pressure CO2-blasting Bilz, M.; Uhlmann, E. | Conference Paper |
2014 | Dry ice blasting as a pre-treatment process for electroplating Baira, E.M.; Kretzschmar, M.; Hollan, R.; Heitmüller, F.; Uhlmann, E. | Conference Paper |
2014 | Effect of cutting edge preparation of coated tools on their performance in milling various materials Bouzakis, K.D.; Bouzakis, E.; Kombogiannis, S.; Makrimallakis, S.; Skordaris, G.; Michailidis, N.; Charalampous, P.; Paraskevopoulou, R.; M'Saoubi, R.; Aurich, J.C.; Barthelmä, F.; Biermann, D.; Denkena, B.; Dimitrov, D.; Engin, S.; Karpuschewski, B.; Klocke, F.; Özel, T.; Poulachon, G.; Rech, J.; Schulze, V.; Settineri, L.; Srivastava, A.; Wegener, K.; Uhlmann, E.; Zeman, P. | Journal Article |
2014 | Einrichtung zur Beaufschlagung eines Fluids mit wechselndem Druck Oberschmidt, Dirk; Uhlmann, Eckart | Patent |
2014 | FE-simulation for a safe design of machine tool safety guards Meister, F.; Uhlmann, E. | Conference Paper |
2014 | Futur 1.2014. Industrie 4.0 : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.) | Journal Issue |
2014 | Futur 2.2014. Robotik : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.) | Journal Issue |
2014 | Generative tool manufacturing for the replication of micro-optical components Uhlmann, E.; Hein, C.; Bergmann, A.; Oberschmidt, D. | Conference Paper |
2014 | Getriebeeinrichtung Oberschmidt, Dirk; Uhlmann, Eckart | Patent |
2014 | Handbuch Spanen. 2., vollst. neu bearb. Aufl. : Spur, Günter (Hrsg.); Heisel, Uwe (Hrsg.); Klocke, Fritz (Hrsg.); Uhlmann, Eckart (Hrsg.) | Book |
2014 | Hot filament activated chemical vapor deposition of interlayers for diamond coatings on tungsten carbide cutting tools Heckmann, Ulrike; Hagemann, Antje; Höfer, Markus; Gäbler, Jan; Schäfer, Lothar; Bräuer, Günter; Fuentes, J.; Henze, S.; Uhlmann, E. | Poster |
2014 | Impact of measurement procedure when error mapping and compensating a small CNC machine using a multilateration laser interferometer Linares, J.-M.; Chaves-Jacob, J.; Schwenke, H.; Longstaff, A.; Fletcher, S.; Flore, J.; Uhlmann, E.; Wintering, J. | Journal Article |
2014 | Improving Efficiency in Robot Assisted Belt Grinding of High Performance Materials Uhlmann, E.; Heitmüller, F. | Conference Paper |
2014 | Innovative keramische Werkzeuge für die spanende Bearbeitung von CFK Uhlmann, E.; Schröer, N.; Miltschus, F.; Hochschild, L. | Journal Article |
2014 | Lapping Uhlmann, E. | Book Article |
2014 | Lifecycle Monitoring - Integration in Serviceprozesse und Produktdatenmanagement Uhlmann, Eckart; Geisert, Claudio; Hohwieler, Eckhard | Book Article |
2014 | Machining of carbon fibre reinforced plastics Uhlmann, E.; Sammler, F.; Richarz, S.; Heitmüller, F.; Bilz, M. | Conference Paper, Journal Article |
2014 | Maschinenbaugruppe, Fertigungsmaschine mit Maschinenbaugruppe sowie Verwendung und Verfahren zur Fertigung von Rotationsbauteilen Oberschmidt, Dirk; Uhlmann, Eckart; Eßmann, Jörg; Herfert, Frank; Polte, Mitchel | Patent |
2014 | Modellierung und Simulation des thermischen Verhaltens einer Werkzeugmaschine mit der Finite-Elemente-Methode Hu, Jiangmin : Uhlmann, Eckart | Dissertation |
2014 | Möglichkeiten und Grenzen des Strahlspanens mittels CO2-Hochdruckstrahlen Bilz, Martin : Uhlmann, Eckart | Dissertation |
2014 | Steigerung der Leistungsfähigkeit von Hartmetallwerkzeugen in der Hartbearbeitung Uhlmann, Eckart; Stawiszynski, Bartek; Leyens, Christoph; Heinze, Stefan | Journal Article |
2014 | Strategies to improve the measuring time for industrial X-ray 3D computed tomography Uhlmann, E.; Oberschmidt, D.; Sawczyn, N. | Conference Paper |
2014 | Tilt angle effects in surface grinding with mounted points Uhlmann, E.; Borsoi Klein, T.; Koprowski, S. | Journal Article |
2014 | Untersuchung von Designgrenzen generativer Fertigungsverfahren Uhlmann, E.; Bergmann, A.; Kashevko, V.; John, P. | Conference Paper |
2014 | Vereinfachung der Systemmontage von metalloptischen IR-Spiegelteleskopen Scheiding, Sebastian : Uhlmann, E. | Dissertation |
2014 | Verfahren und Vorrichtung zum Erzeugen einer dreidimensionalen Abbildung eines Objekts Uhlmann, Eckart; Engel, Sebastian; Käseberg, Marc; Keeve, Erwin; Stopp, Fabian | Patent |
2014 | Verfahren zur automatisierten Reinigung Uhlmann, E.; Oberschmidt, D.; Kuche, Y. | Journal Article |
2014 | Verification of design rules for additive manufacturing Uhlmann, E.; Bergmann, A.; John, P.; Kashevko, V. | Conference Paper |
2014 | Werkzeugkonzept zum Mikrofräsen mit superharten Schneidstoffen Löwenstein, Armin; Polte, Mitchel; Polte, Julian; Uhlmann, Eckart; Oberschmidt, Dirk | Journal Article |
2013 | Accoustic emission-based micro milling tool contact detection as an integrated machine tool function Uhlmann, Eckart; Raue, Niels; Gabriel, Christian | Conference Paper |
2013 | Additive Prozesskette zur Instandsetzung von Bauteilen Bergmann, André; Grosser, Hendrik; Graf, Benjamin; Uhlmann, Eckart; Rethmeier, Michael; Stark, Rainer | Journal Article |
2013 | Advances in the compensation of dynamic machine tool errors for compliant machine tool frames Uhlmann, Eckart; Eßmann, Jörg; Langmack, Malte; Kurz, Martin | Conference Paper |
2013 | Applicability of industrial robots for machining and repair processes Uhlmann, Eckart; Heitmüller, Florian; Manthei, Marcel; Reinkober, Sascha | Journal Article, Conference Paper |
2013 | Betrachtung der Energie- und Stoffströme beim Wasserstrahlschneiden Manthei, Marcel; Uhlmann, Eckart | Conference Paper |
2013 | Complex bore holes fabricated by combined Helical Laser Drilling and Micro Electrical Discharge Machining Uhlmann, E.; Oberschmidt, D.; Langmack, M. | Conference Paper |
2013 | Cutting simulation with the meshfree finite pointset method Uhlmann, E.; Gerstenberger, R.; Kuhnert, J. | Conference Paper, Journal Article |
2013 | Data mining and visualization of diagnostic messages for condition monitoring Uhlmann, Eckart; Geisert, Claudio; Hohwieler, Eckhard; Altmann, Ian | Journal Article, Conference Paper |
2013 | Development and optimization of the die-sinking EDM-technology for machining the nickel-based alloy MAR-M247 for turbine components Uhlmann, E.; Domingos, D.C. | Conference Paper, Journal Article |
2013 | Development of a material model for visco-elastic abrasive medium in abrasive flow machining Uhlmann, Eckart; Doits, M.; Schmiedel, Christian | Conference Paper, Journal Article |
2013 | Development of a versatile and continuously operating cell disruption device Uhlmann, Eckart; Oberschmidt, Dirk; Spielvogel, Anja; Herms, Katrin; Polte, Mitchel; Polte, Julian; Dumke, A. | Journal Article, Conference Paper |
2013 | Effiziente Fabriken - Wissen, Werkzeuge, Wertschöpfung. Vorträge, Proceedings : Uhlmann, Eckart (Hrsg.) | Conference Proceedings |
2013 | Einfluss der Oberflächenstrukturierung und -texturierung eines Kunststoffsubstrats auf die Anhaftung von Zellen Huynh, Quang Ut : Uhlmann, Eckart | Dissertation |
2013 | Ersatzteilfertigung und Reparatur mittels additiver Fertigungsverfahren Uhlmann, E.; König-Urban, K.; Rethmeier, M.; Graf, B. | Conference Paper |
2013 | Futur 1-3.2013. Efficient Factories : Uhlmann, E. (Ed.); Pospischil, S. (Red.) | Journal Issue |
2013 | Futur 1.2013. Maintenance, Repair and Overhaul : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.) | Journal Issue |
2013 | Futur 2.2013. Effiziente Fabriken : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.) | Journal Issue |
2013 | Futur 3.2013. Produktentwicklung neu gedacht : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.) | Journal Issue |
2013 | Future trends in production engineering : Schuh, Günther (Ed.); Uhlmann, Eckart (Ed.); Neugebauer, Reimund (Ed.) | Conference Proceedings |
2013 | Gyroscopic and mode interaction effects on micro-end mill dynamics and chatter stability Shi, Y.; Mahr, F.; Wagner, U. von; Uhlmann, E. | Journal Article |
2013 | Hybride Leistungsbündel für eine nachhaltige Produktionstechnik Uhlmann, E. | Journal Article |
2013 | Improving maintenance services for machine tools by integrating specific software functions Uhlmann, Eckart; Otto, Franz; Geisert, Claudio | Conference Paper |
2013 | Influence of inclusion contents on the micro-machinability of three plastic mold steels Uhlmann, Eckart; Zanatta, A.M.; Mahr, Frederik; Gomes, J.O. | Journal Article |
2013 | Integration optischer Messtechnik in Ultrapräzisionsmaschinen für die Korrekturbearbeitung beim Drehen mit Slow-Slide-Servo Kurz, Martin : Uhlmann, Eckart | Dissertation |
2013 | Investigation of dry-EDM micro drilling for high performance ceramics Uhlmann, Eckart; Schimmelpfennig, Tassilo-Maria | Conference Paper |
2013 | Investigations on vibration-assisted EDM-machining of seal slots in high-temperature resistant materials for turbine components Uhlmann, E.; Domingos, D.C. | Conference Paper, Journal Article |
2013 | IPS2 Control System for the Integrated Support of Service Processes Uhlmann, E.; Raue, N. | Conference Paper |
2013 | Kompensation der Verlagerung an nachgiebigen Werkzeugmaschinengestellen am Beispiel von Fräsmaschinen für die Mikrobearbeitung Eßmann, Jörg : Uhlmann, Eckart | Dissertation |
2013 | Lapidação por extrusão para o acabamento de matrizes e moldes Uhlmann, Eckart; Borsoi Klein, T.; Schmiedel, C. | Journal Article |
2013 | Machining of microfluidic structures for biotechnological components Uhlmann, E.; Oberschmidt, D.; Hein, C.; Mahr, F. | Conference Paper |
2013 | Markt- und Trendanalyse in der industriellen Teilereinigung: Wissen, wie der Markt tickt Uhlmann, Eckart; Bilz, Martin; Motschmann, Simon; Mankiewicz, Johannes | Journal Article |
2013 | Markt- und Trendstudie "Nachbearbeitungsverfahren 2012". Schwerpunkt Strömungsschleifen Uhlmann, Eckart; Schmiedel, Christian | Study |
2013 | Marktsituation und Trends in der Strahlverfahrenstechnik Bilz, Martin; Motschmann, Simon; Uhlmann, Eckart | Journal Article |
2013 | Mobile camera for measuring and testing in the working area of machine tools Hohwieler, E.; Feitscher, R.; Uhlmann, E. | Conference Paper |
2013 | MRO - challenge and chance for sustainable enterprises Uhlmann, Eckart; Bilz, Martin; Baumgarten, Jeanette | Journal Article, Conference Paper |
2013 | NC-form grinding of carbon fibre reinforced silicon carbide composite Uhlmann, E.; Borsoi Klein, T.; Schweitzer, L.; Neubrand, A. | Conference Paper |
2013 | The potential of reducing the energy consumption for machining TiAl6V4 by using innovative metal cutting processes Uhlmann, E.; Fürstmann, P.; Rosenau, B.; Gebhard, S.; Gerstenberger, R.; Müller, G. | Conference Paper |
2013 | Process machine interactions in Micro Milling Uhlmann, E.; Mahr, F.; Shi, Y.; Wagner, U. von | Book Article |
2013 | PSS-CAD: An Approach to the Integrated Product and Service Development Uhlmann, E.; Bochnig, H. | Conference Paper |
2013 | Selbstorganisierende Produktion Uhlmann, E.; Hohwieler, E.; Kraft, M. | Journal Article |
2013 | Selbstorganisierende Produktion mit verteilter Intelligenz Uhlmann, Eckart; Hohwieler, Eckhard; Kraft, Manfred | Journal Article |
2013 | Spanbildung und Werkzeugverschleiß bei der Zerspanung partikelverstärkter Titanmatrix-Verbundwerkstoffe Roeder, Martin : Uhlmann, Eckart | Dissertation |
2013 | Steigerung der Werkzeugstandzeit und Prozesssicherheit. Bei der Schweißnahtnachbearbeitung durch angepasste Fräswerkzeuge Uhlmann, E.; Lypovka, P. | Journal Article |
2013 | Tailored microfluidic chips for biotechnology Uhlmann, Eckart; Mahr, Frederik; Hein, Christoph; Herms, Katrin; Oberschmidt, Dirk | Conference Paper |
2013 | Tribology of treated and coated cutting tool surfaces Uhlmann, E.; König, J.; Sammler, F. | Book Article |
2013 | Unterstützungspotenziale der Automatisierungstechnik im technischen Kundendienst Uhlmann, Eckart; Raue, Niels; Geisert, Claudio | Study |
2013 | Using a text mining tool for patent analyses Wich, Yvonne; Warschat, Joachim; Spath, Dieter; Ardilio, Antonino; König-Urban, Kamilla; Uhlmann, Eckart | Conference Paper |
2013 | Verfahren zur Fertigung eines kompakten Bauteils sowie mit dem Verfahren herstellbares bauteil Uhlmann, Eckart; Bergmann, Andre; König-Urban, Kamilla; Günster, Jens; Gomes, Cynthia | Patent |
2013 | A workshop method for identifying information flows in IPS2 Beverungen, D.; Uhlmann, Eckart; Stelzer, Christian; Raue, Niels; Gabriel, Christian; Knackstedt, R. | Conference Paper |
2013 | Zellaufschluss für die Biotechnologie Uhlmann, E.; Oberschmidt, D.; Spielvogel, A.; Polte, M.; Polte, J.; Herms, K. | Journal Article |
2012 | Abrasive Waterjet Turning of High Performance Materials Uhlmann, E.; Flögel, K.; Kretzschmar, M.; Faltin, F. | Conference Paper |
2012 | Abrichttechnologie für das Werkzeugschleifen von Schaftfräsern Uhlmann, E.; Bäcker, C. | Journal Article |
2012 | Analyse und Optimierung von Werkzeugmaschinen und Fertigungsprozessen Uhlmann, E.; Bochnig, H.; Hu, J.; Ivanov, I.; Meister, F.; Mewis, J.; Prasol, L.; Rasper, P.; Richard, S.; Ziefle, A. | Journal Article |
2012 | Anwendung hybrider Leistungsbündel am Beispiel der Mikroproduktion Uhlmann, Eckart; Gabriel, Christian; Stelzer, Christian; Oberschmidt, Dirk | Book Article |
2012 | Applications and requirements for pulse magnetic welding of sheet metal plates Uhlmann, E.; Ziefle, A. | Conference Paper |
2012 | Assistenzsystem zur Ausgestaltung hybrider Leistungsbündel Uhlmann, Eckart; Bochnig, Holger | Book Article |
2012 | Automatisierungstechnik für Erbringungsprozesse hybrider Leistungsbündel Uhlmann, E.; Geisert, C.; Raue, N.; Stelzer, C. | Book Article |
2012 | Bearbeitung und Einfluss der Schneidkantenmikrogeometrie von Hartmetallwerkzeugen im Fräsprozess Uhlmann, E.; Gebhard, S.; Sammler, F.; Kropidlowski, K. | Journal Article |
2012 | Chatter frequencies of micromilling processes: Influencing factors and online detection via piezoactuators Shi, Yuhui; Mahr, Frederik; Wagner, Utz von; Uhlmann, Eckart | Journal Article |
2012 | Coining of micro structures with an electromagnetically driven tool Uhlmann, E.; König, C.; Prasol, L.; Ziefle, A. | Conference Paper |
2012 | Design- and control-concept for compliant machine tools based on controller integrated models Uhlmann, E.; Eßmann, J.; Wintering, J.-H. | Journal Article |
2012 | Detektoranordnung zum Aufnehmen von Röntgenbildern eines abzubildenden Objekts Keeve, E.; Engel, S.; Stopp, F.; Käseberg, Marc; Uhlmann, Eckart | Patent |
2012 | Diamant in der Leichtbaufertigung Uhlmann, E.; Miltschus, F. | Journal Article |
2012 | Effiziente Strahlprozesse - Betrachtungen von Kosten, Energie- und Ressourcenverbrauch Uhlmann, E.; Hollan, R.; Faltin, F. | Book Article |
2012 | Einsatzverhalten von PKD und Bor-dotiertem CVD-Diamant bei der Mikrofunkenerosion Röhner, Markus : Uhlmann, Eckart | Dissertation |
2012 | Eiskalt sauber. Einsatz und Potenziale des CO2-Strahlens Bilz, M.; Motschmann, S.; Uhlmann, E. | Journal Article |
2012 | Existing and potential applications of CO2 blasting - ice clean Bilz, Martin; Motschmann, Simon; Uhlmann, Eckart | Journal Article |
2012 | Fabrication of smooth surfaces in hardened tool to steel using my-EDM technology Uhlmann, Eckart; Domingos, David C. | Conference Paper |
2012 | Feinbearbeitung mit Robotern Uhlmann, E.; Heitmüller, F.; Dethlefs, A. | Journal Article |
2012 | FEM modeling of hard turning with consideration of phase transformations Uhlmann, E.; Mahnken, R.; Ivanov, I.M.; Cheng, C. | Conference Paper |
2012 | Funktionalität nutzbar machen - Technologie vereinfachen Bochnig, Holger; König, Christoph; Uhlmann, Eckart | Conference Paper |
2012 | Futur 1-3.2012. Smart Production Technologies : Uhlmann, E. (Ed.); Pospischil, S. (Red.) | Journal Issue |
2012 | Futur 1.2012. Produktionstechnologien und -systeme : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.) | Journal Issue |
2012 | Futur 2.2012. Smart Automation : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.) | Journal Issue |
2012 | Futur 3.2012. Qualität im Management : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.) | Journal Issue |
2012 | Gasturbine - Instandsetzung von Hochdruckturbinenschaufeln König-Urban, Kamilla; Uhlmann, Eckart | Book Article |
2012 | General detection of microbial contamination in technical fluids Langbein, J.E.; Hein, C.; Spielvogel, A.; Lorenz, D.; Stahl, U.; Oberschmidt, D.; Uhlmann, E. | Conference Paper |
2012 | High-velocity coining of microstructures in high-grade steel Uhlmann, Eckart; König, Christian; Mahr, Frederik; Domingos, David C.; Zanatta, A.M. | Conference Paper |
2012 | Hochgeschwindigkeitsbearbeitung von Nickelbasislegierungen: Keramische Schaftfräswerkzeuge Uhlmann, E.; Wacinski, M.; Bäcker, C. | Journal Article |
2012 | Höhere Energieproduktivität von Werkzeugmaschinen Uhlmann, E.; Duchstein, B.; Arnold, L. | Journal Article |
2012 | Hybride Leistungsbündel - ein neues Produktverständnis Meier, Horst; Uhlmann, Eckart | Book Article |
2012 | Improvement of Surface Accuracy and Shop Floor Feed Rate Smoothing Through Open CNC Monitoring System and Cutting Simulation Schützer, K.; Uhlmann, E.; Conte, E. del; Mewis, J. | Conference Paper |
2012 | Impulsmagnetische Umformung der Magnesiumlegierung AZ31 Uhlmann, E.; Prasol, L. | Journal Article |
2012 | Influence of Workpiece Velocity on Chip Formation Mechanisms in Reciprocating Grinding of Ceramic Materials Uhlmann, E.; Sammler, C. | Journal Article |
2012 | Innovationszentren für Brasilien Kohl, Holger; Uhlmann, Eckart | Journal Article |
2012 | Innovative Ansätze zur Schienenwartung aus der Feinbearbeitung am IWF der TU Berlin Uhlmann, E.; Lypovka, P. | Journal Article |
2012 | Innovative Feinbearbeitungsstrategien für Freiformflächen Uhlmann, E.; Heitmüller, F.; Dethlefs, A.; Bäcker, C. | Conference Paper |
2012 | Integrierte industrielle Sach- und Dienstleistungen : Meier, H. (Hrsg.); Uhlmann, Eckart (Hrsg.) | Book |
2012 | Keramische Werkstoffe trocken erodieren Uhlmann, E.; Schimmelpfennig, T.-M.; Langmack, M. | Journal Article |
2012 | Laserwendel- und funkenerosives Mikrobohren. Hybridmaschine und Prozessuntersuchung zur kombinierten Bearbeitung Uhlmann, E.; Langmack, M.; Schimmelpfennig, T.-M.; Fornaroli, C. | Journal Article |
2012 | Lifecycle-monitoring. Integration in Service-Prozesse und Produktdatenmanagement Uhlmann, Eckart; Geisert, Claudio; Hohwieler, Eckhard | Conference Paper |
2012 | Machining and finishing of ceramics Uhlmann, E.; Hasper, G.; Hoghé, T.; Hübert, C.; Mihotovic, V.; Sammler, C. | Book Article |
2012 | Marktstudie Strahlverfahren 2012 Bilz, Martin; Manthei, Marcel; Motschmann, Simon; Uhlmann, Eckart | Study |
2012 | Mikrostrukturierte Zahnräder für Windkraftanlagen Uhlmann, E.; Bäcker, C. | Journal Article |
2012 | Modellbasierte Prozessauslegung des Druckfließläppens am Beispiel keramischer Werkstoffe Mihotovic, Vanja : Uhlmann, Eckart | Dissertation |
2012 | Nachhaltige Strahlprozesse mit unbeständigen Strahlmitteln Baira, El Mutapha; Kretzschmar, Michael; Uhlmann, Eckart | Journal Article |
2012 | Neue Brücken ins Reich der Mitte Uhlmann, Eckart | Journal Article |
2012 | New PCD tools for micro machining Uhlmann, E.; Löwenstein, A.; Mahr, F.; Langmack, M. | Conference Paper |
2012 | Parametrisierung von Prozess-Struktur-Modellen Uhlmann, E.; Rasper, P. | Journal Article |
2012 | Produktivitätssteigerung von Fräsprozessen durch Prognose des Stabilitätsverhaltens Rasper, Patrick; Uhlmann, Eckart | Journal Article |
2012 | Robotergeführte Kantenbearbeitung an Turbinenbauteilen Uhlmann, E.; Wacinski, M.; Dethlefs, A. | Journal Article |
2012 | Röntgenquelle mit Modul und Detektor für optische Strahlung Keeve, Erwin; Stopp, F.; Käseberg, Marc; Engel, S.; Uhlmann, Eckart | Patent |
2012 | Schleifen von Hartmetall- und Vollkeramik-Schaftfräsern Hübert, Christoph : Uhlmann, Eckart | Dissertation |
2012 | Schneidkantenentstehung beim Werkzeugschleifen von Schaftfräsern Uhlmann, E.; Bäcker, C. | Journal Article |
2012 | Sichere Schnittstelle "Sichtscheibe – Umhausung“" Uhlmann, E.; Duchstein, B.; Meister, F. | Journal Article |
2012 | Sicherheit an Werkzeugmaschinen. Die Bedeutung trennender Schutzeinrichtungen für die Risikoreduktion an Werkzeugmaschinen Uhlmann, E.; Bell, T.; Duchstein, B.; Meister, F.; Mewis, J.; Mödden, H. | Journal Article |
2012 | Smarte Werkzeuge für harte Werkstoffe Roeder, M.; Uhlmann, E.; Richarz, S.; Fürstmann, P. | Journal Article |
2012 | Software optimiert Serviceprozesse an Werkzeugmaschinen Uhlmann, E.; Otto, F.; Geisert, C. | Journal Article |
2012 | Studie zur Verarbeitung von Wolframkarbid-Kobalt für die additive Fertigung von innenkonturierten Werkzeugen Bergmann, André; Gridin, Witalij; Uhlmann, Eckart | Conference Paper |
2012 | Tauchgleitläppen zur Schneidkantenpräparation von Mikrofräsern Uhlmann, Eckart; Löwenstein, Armin; Springer, H. | Journal Article |
2012 | Technical Design Packaging im Werkzeugmaschinenbau durch Effizienz und Effektivität in der Produktentwicklung Uhlmann, E.; Reiff-Stephan, J.; Duchstein, B.; Mewis, J. | Conference Paper |
2012 | Teilereinigung mit flüssigem CO2 bietet Rationalisierungspotenziale Mankiewicz, J.; Bilz, M.; Uhlmann, E.; Petermann, M.; Kareth, S. | Journal Article |
2012 | Thermal Modelling of a High Speed Motor Spindle Uhlmann, E.; Hu, J. | Conference Paper |
2012 | Thermal modelling of an HSC machining centre to predict thermal error of the feed system Uhlmann, E.; Hu, J. | Journal Article |
2012 | A time domain simulation approach for micro milling processes Uhlmann, Eckart; Mahr, Frederik | Conference Paper, Journal Article |
2012 | Tool wear behaviour of internally cooled tools at different cooling liquid temperatures Uhlmann, E.; Fries, E.; Fürstmann, P.; Roeder, M. | Conference Paper |
2012 | Two approaches to use phase measuring deflectometry in ultra-precision machine tools Faber, C.; Kurz, M.; Röttinger, C.; Olesch, E.; Domingos, D.; Löwenstein, A.; Häusler, G.; Uhlmann, E. | Conference Paper |
2012 | Wasserstrahldrehen für den Leichtbau Uhlmann, E.; Flögel, K.; Faltin, F.; Kretzschmar, M. | Journal Article |
2012 | Wear reduction at double face grinding with planetary kinematics Uhlmann, E.; Hoghé, T. | Journal Article |
2012 | Werkzeugauslegung zur Bearbeitung von Leichtbauwerkstoffen Uhlmann, E.; Reimers, W.; Sammler, F.; Meixner, M. | Journal Article |
2012 | Werkzeugmanagement im Rahmen hybrider Leistungsbündel Uhlmann, E.; Seliger, G.; Gabriel, C.; Raune, N.; Wewior, J.; Stelzer, C. | Journal Article |
2012 | Werkzeugmaschinen der Zukunft Uhlmann, E. | Journal Article |
2012 | Wirtschaftliche Zerspanung von faserverstärkten Kunststoffen Uhlmann, E.; Miltschus, F. | Journal Article |
2012 | Zerspankraftsimulation beim Hartdrehen Uhlmann, E.; Ivanov, I.M. | Journal Article |
2012 | Zerspanung von Titanmatrix-Verbundwerkstoffen Uhlmann, E.; Roeder, M.; Richarz, S. | Journal Article |
2011 | 6. Berliner Runde - Neue Konzepte für Werkzeugmaschinen 2011. Begleitband : Uhlmann, Eckart; Bochnig, Holger; König, Christoph; Kumm, Tibor | Conference Proceedings |
2011 | Adaptives Roboterschleifen für MRO-Prozesse Uhlmann, E.; Heitmüller, F. | Journal Article |
2011 | Aktives Spannsystem: Positionieren von Präzisionsteilen in der Werkzeugmaschine Uhlmann, E.; Oberschmidt, D.; Essmann, J.; Langmack, M.; Löwenstein, A. | Journal Article |
2011 | Analyse und Nutzung des Leichtbaupotentials trennender Schutzeinrichtungen an Werkzeugmaschinen Bold, J.; Duchstein, B.; Uhlmann, E. | Book Article |
2011 | Austenitic stainless steel for separating safeguards Uhlmann, E.; Duchstein, B. | Journal Article |
2011 | Bearbeitungsstrategien zum Längs-Außen-Profilschleifen keramischer Werkstoffe Uhlmann, E.; Sammler, C. | Journal Article |
2011 | Bedeutung der Energieeffizienz von Werkzeugmaschinen für KMU - Potentiale, Herausforderungen und Lösungen Uhlmann, E. | Conference Paper |
2011 | Charakterisierung geometrisch bestimmter Schneiden Uhlmann, E.; König, J.; Dethlefs, A.; Graf von der Schulenburg, M. | Journal Article |
2011 | Deflectometry setup for machine integrated measurement of specular surfaces miniaturized phase measuring Häusler, G.; Uhlmann, E.; Faber, C.; Olesch, E.; Röttinger, C.; Kurz, M. | Conference Paper |
2011 | Development of an active work piece holder for vibration assisted micro milling Uhlmann, E.; Mahr, F.; Oberschmidt, D. | Conference Paper |
2011 | Dienstleistungsanteile hybrider Leistungsbündel Uhlmann, E.; Stelzer, C.; Bochnig, H.; Raue, N.; Gabriel, C. | Journal Article |
2011 | Double face grinding of carbon fibre reinforced silicon carbide composite Uhlmann, Eckart; Hoghe, T.; Borsoi Klein, T. | Conference Paper |
2011 | Einfluss der Vorschubgeschwindigkeit auf die Abtrennmechanismen beim Schnellhubschleifen keramischer Werkstoffe Uhlmann, E.; Sammler, C. | Journal Article |
2011 | Einsatz von Karbonfaserverbundwerkstoffen zur Kompensation thermischer Winkelverlagerungen an Werkzeugmaschinen Uhlmann, E.; Marcks, P. | Book Article |
2011 | Einsatzverhalten genuteter CBN-Schleifscheiben mit keramischer Bindung beim Außenrund-Einstechschleifen Kirchgatter, Mathias : Uhlmann, Eckart (Hrsg.) | Dissertation |
2011 | Entwicklung der netzfreien Finite-Pointset-Methode für die Zerspansimulation Uhlmann, E.; Gerstenberger, R.; Schäfer, M.; Kuhnert, J. | Journal Article |
2011 | Entwicklung eines aktiven Spannsystems zur hochpräzisen Kompensation von Winkelfehlern bei der Positionierung von Präzisionsbauteilen in Werkzeugmaschinen Uhlmann, E.; Oberschmidt, D.; Essmann, J.; Löwenstein, A.; Pagel, L.; Gaßmann, S.; Hinze, M. | Report |
2011 | Entwicklung grüner Technologien in der funkenerosiven Bearbeitung von Hochleistungskeramiken Uhlmann, E.; Schimmelpfennig, T.-M. | Journal Article |
2011 | Ergebnisse aus dem Forschungsprojekt "KodiWasch": Reinigung mit komprimiertem Kohlendioxid Uhlmann, E.; Bilz, M.; Mankiewicz, J.; Rebien, D. | Journal Article |
2011 | FEM-Aufprallsimulation für gealtertes Polycarbonat Uhlmann, E.; Duchstein, B.; Hamann, A. | Journal Article |
2011 | Futur 1-3.2011. Tomorrow‘s Technologies Today : Uhlmann, E. (Ed.); Pospischil, S. (Red.) | Journal Issue |
2011 | Futur 1.2011. Forschung im Verbund : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.) | Journal Issue |
2011 | Futur 2.2011. Medizintechnik : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.) | Journal Issue |
2011 | Futur 3.2011. Kunst – Kultur – Produktion : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.) | Journal Issue |
2011 | Generative Herstellung von Implantaten Bergmann, A.; Uhlmann, E.; John, F. | Conference Paper |
2011 | Grain mill test for sintered microcrystalline aluminum oxide abrasive grains Uhlmann, E.; Hasper, G. | Journal Article |
2011 | Hartdrehen von PM-Schnellarbeitsstahl Uhlmann, E.; Richarz, S.; Fuentes, J. | Journal Article |
2011 | Hochgeschwindigkeitsumformen von Magnesiumlegierungen bei Raumtemperatur Uhlmann, E.; Prasol, L. | Conference Paper |
2011 | Hochtechnologie und industrielle Dienstleistungen Uhlmann, E. | Journal Article |
2011 | Höhere Wandstärke = Höhere Sicherheit? Uhlmann, E.; Duchstein, B. | Journal Article |
2011 | In situ experiments with synchrotron high-energy x-rays and neutrons Staron, P.; Fischer, T.; Lippmann, T.; Stark, A.; Daneshpour, S.; Schnubel, D.; Uhlmann, E.; Gerstenberger, R.; Camin, B.; Reimers, W.; Eidenberger, E.; Clemens, H.; Huber, N.; Schreyer, A. | Journal Article |
2011 | In situ strain measurement in the chip formation zone during orthogonal cutting Uhlmann, E.; Gerstenberger, R.; Herter, S.; Hoghé, T.; Reimers, W.; Camin, B.; Martins, R.V.; Schreyer, A.; Fischer, T. | Journal Article |
2011 | Influence of structuring by abrasive machining on the tribological properties of workpiece surfaces Uhlmann, E.; Borsoi Klein, T.; Hochschild, L.; Bäcker, C. | Journal Article, Conference Paper |
2011 | Influences of the IPS2 business model on the development of a micro milling spindle Uhlmann, E.; Gabriel, C.; Raue, N.; Stelzer, C. | Conference Paper |
2011 | Influences on specific cutting forces and their impact on the stability behaviour of milling processes Uhlmann, E.; Rasper, P. | Journal Article |
2011 | Innovative Lösungen für Instandhaltung und Reparatur in Energie und Verkehr - ein Erfahrungsbericht aus dem Innovationscluster MRO (Maintenance, Repair and Overhaul) Uhlmann, E.; Röhner, M. | Presentation |
2011 | Inovacao na maquiagem e retificacao de materiais Uhlmann, E.; Borsoi Klein, T.; Mihotovic, Vanja | Journal Article |
2011 | International Conference Maintenance, Repair and Overhaul, MRO 2011. Documentation Röhner, Markus; Behrendt, Jeannette : Uhlmann, Eckart (Ed.) | Conference Proceedings |
2011 | Knowledge feedback to the IPS2 development Bochnig, H.; Uhlmann, E.; Gegusch, R.; Seliger, G. | Conference Paper |
2011 | Kunststoffeinsatz - Gefahr oder Segen? Uhlmann, E.; Duchstein, B. | Journal Article |
2011 | Licht: Werkzeug mit Potential Uhlmann, E.; Urban, K. | Conference Paper |
2011 | Markt- und Trendanalyse 2011: MRO Röhner, M.; Behrendt, J.; Duikeren, B. van : Uhlmann, E. (Hrsg.) | Book |
2011 | Markt- und Trendanalyse Laserstrahlschmelzen 2010 Uhlmann, E.; Urban, K. | Journal Article |
2011 | Markt- und Trendstudie 2010: Laserstrahlschmelzen in generativer Fertigung Uhlmann, E.; Urban, K. | Study |
2011 | Marktstudie Wasserstrahlschneiden 2011 Uhlmann, Eckart; Manthei, Marcel; Motschmann, Simon; Bilz, Martin | Study |
2011 | Mobile Kamera für das Messen und Prüfen im Arbeitsraum von Werkzeugmaschinen Hohwieler, E.; Feitscher, R.; Uhlmann, E. | Book Article |
2011 | Multifunktionales Transportsystem mit mehreren fahrbaren Transporteinheiten Schönewolf, W.; Brüning, M.; Uhlmann, E. | Patent |
2011 | Neue Potentiale der Impulsmagnetik Uhlmann, E.; Prasol, L.; König, C.; Ziefle, A. | Conference Paper |
2011 | New Approaches for Bacterial Detection in Technical Fluids Oberschmidt, Dirk; Spielvogel, Anja; Hein, C.; Langbein, J.E.; Lorenz, D.; Stahl, U.; Uhlmann, E. | Conference Paper |
2011 | New hybrid machine tool with an automated clamping system for drilling micro holes by laser helical drilling and eDM Uhlmann, E.; Langmack, M.; Löwenstein, A.; Oberschmidt, D. | Conference Paper |
2011 | Optionen für ressourceneffiziente Produktionsanlagen Uhlmann, E. | Conference Paper |
2011 | Performance characteristics of coated micro milling tools Uhlmann, Eckart; Mahr, F.; Löwenstein, A.; Raue, N.; Oberschmidt, Dirk | Conference Paper |
2011 | Polieren komplexer Bauteile. Am IWF der TU Berlin entgratet, verrundet und poliert man robotergestützt Uhlmann, E.; Dethlefs, A. | Journal Article |
2011 | Produktivitätssteigerung bei der Endbearbeitung durch Hartdrehen Uhlmann, E.; Ivanov, I.M. | Conference Paper |
2011 | Resource efficient grinding - solutions and restrictions Uhlmann, E.; Sammler, C.; Byrne, F. | Journal Article |
2011 | Röntgensystem und Verfahren zur Generierung von 3D-Bilddaten Keeve, Erwin; Stopp, Fabian; Uhlmann, Eckart | Patent |
2011 | Schneidkantenpräparation von Mikrofräsern Uhlmann, E.; Löwenstein, A.; Mahr, F.; Oberschmidt, D. | Journal Article |
2011 | Simulation approaches for pulse magnetic forming Uhlmann, E.; Ziefle, A. | Journal Article |
2011 | Spannsystem zur Kompensation von Winkelabweichungen Uhlmann, E.; Essmann, J.; Löwenstein, A.; Hinze, M.; Langmack, M. | Journal Article |
2011 | Strahlschneidvorrichtung Kilzer, A.; Weidner, Eckhard; Pollak, Stefan; Engelmeier, L.; Krieg, M.; Bilz, M.; Uhlmann, Eckart | Patent |
2011 | Study on process forces and wear behavior of PCD tools in stone milling Uhlmann, Eckart; Manthei, Marcel | Conference Paper |
2011 | Technologie zur Herstellung vollkeramischer Fräswerkzeuge Bäcker, C.; Herrmann, M.; Hübert, C.; Koplin, C; Oberschmidt, D.; Uhlmann, E.; Renz, A.; Schulz, I.; Wacinski, M. | Report |
2011 | Teilereinigung im Überblick Bilz, Martin; Uhlmann, Eckart | Journal Article |
2011 | Tool grinding of end mill cutting tools made from high performance ceramics and cemented carbides Uhlmann, E.; Hübert, C. | Journal Article |
2011 | Um die Ecke gebracht - schonende Umlenkung von Trockeneis-Strahlmittel Uhlmann, E.; Motschmann, S.; Bilz, M.; Schöfisch, K. | Conference Paper |
2011 | Umhausungen ortsfester Schleifmaschinen Uhlmann, E.; Duchstein, B. | Journal Article |
2011 | Using diamond coated tool-electrodes for drilling micro holes with EDM Uhlmann, E.; Langmack, M.; Garn, R.; Oberschmidt, D.; Fecher, J.; Rosiwal, S.M.; Singer, R.F. | Conference Paper |
2011 | Vergleichende Bewertung der Bruchmechanik mikrokristalliner Sinterkorundkörnungen anhand von Mahlkraftanalysen und Untersuchungen zum Außenrundeinstechprofilschleifen Uhlmann, E.; Hasper, G. | Book Article |
2011 | Vollhartmetall-Schaftfräser für die Hartbearbeitung über 65 HRC Uhlmann, E.; Richarz, S.; Sattel, S. | Journal Article |
2011 | Wärmebilanzierung an Hartmetall-Wendeschneidplatten Uhlmann, E.; Reinicke, T. | Journal Article |
2011 | Werkzeugschleifen von Schaftfräsern aus Kearmik und Hartmetall Uhlmann, E.; Hübert, C. | Book Article |
2010 | ActiveClamp innovatives Spannsystem für Mikro- und Präzisionsbauteile Uhlmann, E.; Löwenstein, A. | Journal Article |
2010 | Application of PCD and boron doped CVD diamond tool electrodes in micro EDM Uhlmann, E.; Röhner, M.; Domingos, D.C. | Conference Paper |
2010 | Bauteile aus Pulver und Licht Urban, K.; Uhlmann, E. | Journal Article |
2010 | Charakterisierung und Auslegung der Grenzschicht PVD-beschichteter Schneidkeramiken Hühns, T. : Uhlmann, E. | Dissertation |
2010 | Development and test of monolithic ceramic end milling cutters for high speed machining of nickel-based-alloys Uhlmann, E.; Wacinski, M. | Conference Paper |
2010 | Development of a high precision clamping system for the compensation of angular errors in workpiece alignments Uhlmann, E.; Löwenstein, A.; Eßmann, J. | Conference Paper |
2010 | Einfluss der Eigenspannungen CVD-diamantbeschichteter Werkzeuge auf das Einsatzverhalten Uhlmann, E.; Byrne, F. | Journal Article |
2010 | Ermittlung, Berechnung und Optimierung des strukturmechanischen Verhaltens am Beispiel von Fräsmaschinen Mense, C. : Uhlmann, E. | Dissertation |
2010 | Futur 1-3.2010. Production Technology for the Future : Uhlmann, E. (Ed.); Pospischil, S. (Red.); Engel, C. (Red.); Roeder, I. (Red.) | Journal Issue |
2010 | Futur 1.2010. Aktuelles aus Forschung und Entwicklung : Uhlmann, E. (Hrsg.); Engel, C. (Red.); Peters, I. (Red.); Behrendt, J. (Red.); Strohmeier, K. (Red.) | Journal Issue |
2010 | Futur 2.2010. Produktionstechnik für die Zukunft : Uhlmann, E. (Hrsg.); Engel, C. (Red.); Roeder, I. (Red.) | Journal Issue |
2010 | Futur 3.2010. Mikroproduktionstechnik : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.) | Journal Issue |
2010 | Influence of coatings in micro-EDM Uhlmann, E.; Röhner, M.; Rosiwal, S.; Domingos, D.C. | Conference Paper |
2010 | Influence of grain size on wear behavior of CVD-diamond coatings in micro-EDM Uhlmann, E.; Rosiwal, S.; Bayerlein, K.; Röhner, M. | Journal Article |
2010 | Investigation on force and temperature distribution in cutting parts while micro milling with monocrystalline diamond end mills Oberschmidt, D.; Uhlmann, E. | Conference Paper |
2010 | Machine tools for hybrid micro manufacturing Eßmann, J.; Uhlmann, E.; Langmack, M. | Conference Paper |
2010 | Marktstudie Kohlendioxidstrahlen 2010 Bilz, M. : Uhlmann, E. | Study |
2010 | Measurement of tool temperatures in the tool-chip contact region by embedded thin film thermocouples Kurz, M.; Geisert, C.; Oberschmidt, D.; Werschmoeller, D.; Uhlmann, E. | Conference Paper |
2010 | Micro-EDM Uhlmann, E.; Röhner, M.; Langmack, M. | Book Article |
2010 | Mikrofräsen mit zylindrischen Diamant-Schaftfräswerkzeugen Oberschmidt, D. : Uhlmann, E. | Dissertation |
2010 | Mit Schleppfinishing zur perfekten Kontur Uhlmann, E.; Oberschmidt, D.; Langmack, M.; Mahr, F.; Löwenstein, A. | Journal Article |
2010 | Neue Konzepte für Werkezugmaschinen : Uhlmann, E.; Duchstein, B. | Conference Proceedings |
2010 | Nutzung von Automatisierungspotenzialen in der Erbringung hybrider Leistungsbündel Uhlmann, E.; Geisert, C. | Journal Article |
2010 | Produktionstechnik - Motor aus der Krise. Vorträge Proceedings : Seliger, G. (Hrsg.); Uhlmann, E. (Hrsg.) | Conference Proceedings |
2010 | Schrittmachertechnologien für eine nachhaltige Produktion Uhlmann, E. | Conference Paper |
2010 | Software agent based monitoring for a micro milling spindle Uhlmann, E.; Geisert, C.; Stelzer, C. | Conference Paper |
2010 | A spatial multiple degree of freedom machine tool model for micro milling simulation Shi, Yuhui; Mahr, Frederik; Wagner, Utz von; Uhlmann, Eckart | Conference Paper |
2010 | Technologieorientierte Fabrikgestaltung für die wandlungsfähige Produktion Mertins, K.; Uhlmann, E. | Journal Article |
2010 | Technology-oriented factory design for agile manufacturing Mertins, K.; Uhlmann, E. | Journal Article |
2010 | Turbomaschinen in Berlin-Brandenburg Besinger, F.; Lichtfuß, H.-J.; Röhner, M.; Uhlmann, E. : Hammel, C. | Study |
2010 | Turbomaschinenforschung in Berlin-Brandenburg Uhlmann, Eckart; Röhner, Markus; Behrendt, Jeannette; Bilz, Martin; Duikeren, Bart van; Hohwieler, Eckhard; Müller, Patrick; Grosser, Hendrik | Book Article |
2010 | Virtuelle Rekonstruktion von Innenräumen basierend auf Messdaten von Tiefenkameras Sabov, A. : Uhlmann, E. | Dissertation |
2009 | Adaptronische Kompensation von Winkelverlagerungen an Werkzeugmaschinen-Hauptspindeln Uhlmann, E.; Marcks, P. | Conference Paper |
2009 | Availability oriented IPS supported by software agents Uhlmann, E.; Geisert, C. | Conference Paper |
2009 | Beeinflussung des Vorbehandlungszustandes der Substratrandzone durch Trockeneisstrahlen am Beispiel von Klebverbindungen Mernissi, A. el : Uhlmann, E. | Dissertation |
2009 | Biosensorische Erfassung und bioaktive Beseitigung mikrobieller Verunreinigungen in Kühlschmierstoffen Oberschmidt, D.; Stelzer, C.; Uhlmann, E. | Conference Paper |
2009 | Compensation of dynamic dislocation for micro milling machine tools Uhlmann, E.; Essmann, J. | Conference Paper |
2009 | Computer aided IPS development Uhlmann, E.; Bochnig, H. | Conference Paper |
2009 | Core process of IPS Uhlmann, E.; Stelzer, C. | Conference Paper |
2009 | CVD diamond coatings on geometrically complex cutting tools Uhlmann, E.; König, J. | Journal Article |
2009 | Design concept for micro milling machine tools based on dynamic dislocation compensation Uhlmann, E.; Eßmann, J. | Conference Paper |
2009 | Dynamische HLB-Netzwerke und die Erbringung hybrider Leistungsbündel auf Basis von Softwareagenten Meier, H.; Krug, C.M.; Völker, O.; Uhlmann, E.; Geisert, C.; Stelzer, C. | Journal Article |
2009 | Einsatz innovativer Schleifverfahren macht Hochleistungsbearbeitung wirtschaftlicher Uhlmann, E.; Sammler, C.; Hoghe, T.; Borsoi Klein, T. | Journal Article |
2009 | The finite-pointset-method for the meshfree numerical simulation of chip formation Uhlmann, E.; Gerstenberger, R.; Graf von der Schulenburg, M.; Kuhnert, J.; Mattes, A. | Conference Paper |
2009 | Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Produktionstechnisches Zentrum Berlin. Jahresbericht 2008 : Uhlmann, E. | Annual Report |
2009 | Futur 1.2009. Schwerpunkt:Technisches Design : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.); Peters, I. (Red.); Strohmeier, K. (Red.) | Journal Issue |
2009 | Futur 2.2009. Aktuelles aus Forschung und Entwicklung : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.); Peters, I. (Red.); Strohmeier, K. (Red.) | Journal Issue |
2009 | Herstellung und Einsatz CVD-diamantbeschichteter Bohrgewindefräser König, J. : Uhlmann, E. | Dissertation |
2009 | Internal cooling of cutting tools Uhlmann, E.; Roeder, M.; Fries, E.; Byrne, F. | Conference Paper |
2009 | Investigations on reduction of tool electrode wear in micro-EDM using novel electrode materials Uhlmann, E.; Röhner, M. | Conference Paper |
2009 | Investigations on the adjustment of the modelling section in 2D simulations of milling processes Uhlmann, E.; Mattes, A.; Graf von der Schulenburg, M.; Gerstenberger, R. | Journal Article |
2009 | Machine-integrated measurement of specular free-formed surfaces using phase-measuring deflectometry Richter, C.; Kurz, M.; Knauer, M.C.; Faber, C.; Olesch, E.; Häusler, G.; Oberschmidt, D.; Eßmann, J.; Uhlmann, E. | Conference Paper |
2009 | Machining of high performance workpiece materials with CBN coated cutting tools Uhlmann, E.; Oyanedel-Fuentes, J.A.; Keunecke, M. | Journal Article |
2009 | Mathematik für Werkzeugmaschinen und Fabrikautomatisierung Uhlmann, E.; Denkena, B.; Hömberg, D. | Book Article |
2009 | Micro milling - investigations on process structure interactions Uhlmann, Eckart; Wagner, Utz von; Mahr, Frederik; Shi, Yuhui | Conference Paper |
2009 | Modellierung von Größeneffekten auf den Spanbildungsprozess bei der Zerspanung von WCu-Teilchenverbundwerkstoffen Uhlmann, E.; Graf von der Schulenburg, M. | Conference Paper |
2009 | Modelling the abrasive flow machining process on advanced ceramic materials Uhlmann, E.; Mihotovic, V.; Coenen, A. | Conference Paper, Journal Article |
2009 | Neue Konzepte für Werkzeugmaschinen : Uhlmann, E. | Conference Proceedings |
2009 | Neue Perspektiven für die Bearbeitung von Nickelbasislegierungen Uhlmann, E.; Wacinski, M. | Journal Article |
2009 | Oberflächenvorbehandlung und Kantenpräparation an Hartmetallwerkzeugen Uhlmann, E.; Richarz, S.; Mihotovic, V. | Journal Article |
2009 | Prozessmodellierung - Mikrofräsen Uhlmann, E.; Mahr, F. | Journal Article |
2009 | Real time error compensation integrating open control system and laser interferometer Essmann, J.; Uhlmann, E. | Conference Paper |
2009 | Semantic Web Framework für die Modellierung und Simulation von Fertigungssystemen Gocev, P.; Mertins, K.; Rabe, M.; Uhlmann, E. | Conference Paper |
2009 | Sichere Identität - ein Schlüsselthema unserer Zeit Krüger, J.; Sy, T.; Uhlmann, E. | Journal Article |
2009 | Substrate pre-treatment of cemented carbides using abrasive flow machining and laser beam ablation Uhlmann, E.; Richarz, S.; Mihotovic, V. | Journal Article |
2009 | Technical applications Bayat, N.; Nethe, A.; Guldbakke, J.M.; Hesselbach, J.; Naletova, V.A.; Stahlmann, H.-D.; Uhlmann, E.; Zimmermann, K. | Book Article |
2009 | Temperaturabhängiges Stabilitätsverhalten Uhlmann, E.; Rasper, P. | Journal Article |
2009 | Thermische Analyse des Bohrprozesses Uhlmann, E.; Aljourdi, A. | Journal Article |
2009 | Verfahren und Vorrichtung zum Gleitspanen eines Werkstuecks Uhlmann, E.; Hasper, G.; Mihotovic, V. | Patent |
2009 | Vollkeramische Fräswerkzeuge prozesssicher einsetzen Uhlmann, E.; Wacinski, M. | Journal Article |
2009 | Wie Prozess und Struktur wechselwirken Uhlmann, E.; Oberschmidt, D.; Mahr, F. | Journal Article |
2008 | Analyse der Effekte beim Trockeneisstrahlen Krieg, M.C. : Uhlmann, E. | Dissertation |
2008 | Analysis and application of CBN coated cutting tools Uhlmann, E.; Fuentes, J.; Keunecke, M. | Conference Paper |
2008 | CBN coatings for high performance cutting tools Uhlmann, E.; Fuentes, J.; Keunecke, M. | Conference Paper |
2008 | CFK Kompensationsstrukturen zur Verringerung thermisch bedingter Verformungen Uhlmann, E.; Marcks, P. | Book Article |
2008 | Design of PSS based on customer requirements Uhlmann, E.; Meier, H.; Stelzer, C.; Geisert, C.; Bochnig, H.; Sadek, K. | Conference Paper |
2008 | Diamant als Elektrodenwerkstoff für die Mikrofunkenerosion Uhlmann, E.; Röhner, M. | Journal Article |
2008 | Energy-efficient cleaning and pre-treatment by centrifugal wheel blasting with sensitive blasting media Uhlmann, E.; Hollan, R. | Conference Paper |
2008 | Entwicklung eines hochdynamischen Bearbeitungszentrums für den Mikro- und Präzisionsformenbau : Uhlmann, E. | Report |
2008 | Entwicklung leistungsfähiger Zerspanungstechnologien Uhlmann, E.; Byrne, F.; Oyanedel-Fuentes, J.A.; Gerstenberger, R.; Graf von der Schulenburg, M.; König, J.; Mattes, A.; Richarz, S.; Roeder, M. | Journal Article |
2008 | Entwicklung von Werkzeugmaschinen mit Parallelkinematik unter Verwendung von Seilantrieben Uhlmann, E.; Kraft, M.; Tonn, N. | Book Article |
2008 | Extended cutting form compensation Kraft, M.; Hohwieler, E.; Uhlmann, E. | Conference Paper |
2008 | Fräsmachinenentwicklung basierend auf Fertigungsprozeß-Maschinenstruktur-Analysen Uhlmann, E.; Mense, C. | Conference Paper |
2008 | Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Produktionstechnisches Zentrum Berlin. Jahresbericht 2007 : Uhlmann, E. | Annual Report |
2008 | Futur 1-3.2008. Sustainability in Production Engineering : Uhlmann, E. (Ed.); Pospischil, S. (Red.); Hayes, C. (Red.) | Journal Issue |
2008 | Futur 1.2008. Aktuelles aus Forschung und Entwicklung : Uhlmann, E. (Hrsg.); Engel, C. (Red.); Hayes, C. (Red.); Peters, I. (Red.) | Journal Issue |
2008 | Futur 2.2008. Aktuelles aus Forschung und Entwicklung : Uhlmann, E. (Hrsg.); Riedel, C. (Red.); Hayes, C. (Red.); Peters, I. (Red.); Pospischil, S. (Red.) | Journal Issue |
2008 | Futur 3.2008. Aktuelles aus Forschung und Entwicklung : Uhlmann, E. (Hrsg.); Pospischil, S. (Red.); Hayes, C. (Red.); Peters, I. (Red.) | Journal Issue |
2008 | Gezieltes Schneidkantenverrunden mit Diamantschleifmedien Graf von der Schulenburg, M.; Mihotovic, V.; Uhlmann, E. | Journal Article |
2008 | Im Test - Neues Produktionsverfahren für leichtere Fahrzeuge Uhlmann, E.; König, C. | Journal Article |
2008 | Innovative Schleifverfahren für die wirtschaftliche Bearbeitung von Hochleistungswerkstoffen Uhlmann, E.; Borsoi Klein, T.; Mihotovic, V. | Journal Article |
2008 | Innovative Zerspanprozesse zur Optimierung industrieller Produktion Uhlmann, E.; König, J. | Journal Article |
2008 | Instrument zum Einfuehren in unzugaengliche Raeume Oberschmidt, D.; Grosser, V.; Uhlmann, E. | Patent |
2008 | Interactions between mechanical vibrations and surface roughness during the micro milling process Uhlmann, Eckart; Mahr, Frederik; Shi, Yuhui; Wagner, U. von; Eßmann, Jörg | Conference Paper |
2008 | Investigations on reduction of tool electrode wear in micro-EDM using novel electrode materials Uhlmann, E.; Röhner, M. | Journal Article |
2008 | Kernprozesse hybrider Leistungsbündel Müller, P.; Uhlmann, E.; Geisert, C.; Stelzer, C.; Knothe, T. | Journal Article |
2008 | Key technologies for sustainable manufacturing Uhlmann, E.; König, J. | Journal Article |
2008 | Key technologies for sustainable production Uhlmann, E.; Krüger, J.; Hühns, T.; Hübert, C.; König, J.; Hollan, R.; Oberschmidt, D.; Byrne, F.; Neumann, C.; Duchstein, B.; Marcks, P. | Conference Paper |
2008 | Machine tool for combines micro milling an laser ablation processes Eßmann, J.; Uhlmann, E.; Wissner, R.; Pauli, A. | Conference Paper |
2008 | Machining behaviour of monocrystalline diamond end mills Uhlmann, E.; Oberschmidt, D. | Conference Paper |
2008 | Machining of micro rotational parts by wire electrical discharge grinding Uhlmann, E.; Piltz, S.; Oberschmidt, D. | Journal Article |
2008 | Material and tribological behaviour of diamond coated cutting tools Uhlmann, E.; Koenig, J. | Conference Paper |
2008 | Monitoring of slowly progressing deterioration of computer numerical control machine axes Uhlmann, E.; Geisert, C.; Hohwieler, E. | Journal Article |
2008 | Neue Konzepte für Werkzeugmaschinen : Uhlmann, E. | Conference Proceedings |
2008 | Optimierung der Gasturbinentechnik Uhlmann, E.; Mihotovic, V. | Journal Article |
2008 | Potenziale und Herausforderungen für die spanende Fertigungstechnik Uhlmann, E.; König, J. | Journal Article |
2008 | Röntgenbild-Aufnahmesystem und Röntgenbild-Aufnahmeverfahren zur Aufnahme von Bilddaten mit Röntgengeräten für eine Volumenrekonstruktion Jank, E.; Uhlmann, E. | Patent |
2008 | Sustainable manufacturing as a factor of innovative production processes Uhlmann, E.; König, J. | Conference Paper |
2008 | Technologieorientiertes Programmier- und Steuerungskonzept für Industrieroboter Uhlmann, E.; Friedrich, T. | Journal Article |
2008 | Ultra precision machine integrated measurement of spheres and aspheres with a twyman-green interferometer Uhlmann, E.; Kurz, M.; Bluemel, T.; Neubert, R.; Oberschmidt, D. | Conference Paper |
2008 | Ultra precision machine-integrated approach to measuring aspheres interferometrically Uhlmann, E.; Kurz, M.; Bosse, M.; Neubert, R.; Bluemel, T.; Oberschmidt, D. | Conference Paper |
2008 | Vorrichtung zum Bewegen eines Werkstuecks oder eines Werkzeugs Essmann, J.; Uhlmann, E. | Patent |
2008 | Zerspansimulationslösungen für die Werkzeugkonstruktion und Prozessauslegung beim Fräsen Mattes, A.M. : Uhlmann, E. (Prüfer) | Dissertation |
2007 | 2D und 3D FEM-Simulationen an Wolfram-Kupfer-Verbundwerkstoffen Uhlmann, E.; Graf von der Schulenburg, M. | Conference Paper |
2007 | Alterndes Polycarbonat Uhlmann, E.; Duchstein, B.; Marcks, P. | Journal Article |
2007 | Analysis of the interaction between milling processes and milling machines for stability prediction and machine tool optimization Uhlmann, E.; Mense, C. | Conference Paper |
2007 | Analysis of the milling machine operating behaviour for process stability prediction and machine tool optimisation Uhlmann, E.; Mense, C. | Conference Paper |
2007 | Assistenzsystem zur sach- und dienstleistungsintegrierten Entwicklung von Werkzeugmaschinen Tonn, N.; Uhlmann, E. | Conference Paper |
2007 | CFD-simulation in the development of dry ice blasting nozzles Kretzschmar, M.; Uhlmann, E. | Conference Paper |
2007 | CFK-Kompensationsstrukturen zur Verringerung thermisch bedingter Verformung Uhlmann, E.; Marcks, P.; Bayat, N. | Conference Paper |
2007 | CFK-Kompensationsstrukturen zur Verringerung thermisch bedingter Verformungen Uhlmann, E.; Marcks, P.; Mense, C. | Conference Paper |
2007 | Computer aided integrated development of industrial product service systems Tonn, N.; Uhlmann, E. | Conference Paper |
2007 | Cutting behaviour of particle reinforced titanium MMC Uhlmann, E.; Roeder, M. | Conference Paper |
2007 | Druckfestigkeit oder Druckentlastung bei Ölverpuffungen in Werkzeugmaschinen Duchstein, B.; Sezbold, J.; Uhlmann, E. | Conference Paper |
2007 | Economical aspects of profiling diamond-grinding wheels Uhlmann, E.; Sroka, F.; Hübert, C. | Journal Article |
2007 | Eigenschaften und Einsatzverhalten CVD-diamantbeschichteter Hartmetallwerkzeuge Kott, R. : Uhlmann, E. (Prüfer) | Dissertation |
2007 | Einsatz cBN-beschichteter Werkzeuge für die Bearbeitung von schwer zerspanbaren Materialien Uhlmann, E.; Fuentes, J.; Keunecke, M. | Journal Article |
2007 | Entwicklung und Konstruktion einer schnellöffnenden Werkzeugmaschinentür - Zusammenspiel zwischen Leichtbau und Maschinenschutz Duchstein, B.; Karrasch, I.; Wittner, M.; Uhlmann, E. | Conference Paper |
2007 | Entwicklungen von Technologien und Systemen für die Planung, Fertigung und Anpassung aktiver Epithesen Uhlmann, E.; Kneissler, M.; Oberschmidt, D.; Müller, G.; Klein, M.; Camerer, C. | Report |
2007 | Europaweit vernetzt forschen und entwickeln Uhlmann, E. | Journal Article |
2007 | European networked research and development Uhlmann, E. | Journal Article |
2007 | Fertigungsmittel Spur, G.; Uhlmann, E. et al. | Book Article |
2007 | Fertigungsverfahren Spur, G.; Uhlmann, E. et al. | Book Article |
2007 | Finite element modeling and cutting simulation of Inconel 718 Uhlmann, E.; Zettier, R. | Journal Article |
2007 | Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Produktionstechnisches Zentrum Berlin. Jahresbericht 2006 : Uhlmann, E. | Annual Report |
2007 | Futur 1-2.2007. Sustainability in Production Engineering : Uhlmann, E. (Ed.); Engel, C. (Red.); Hayes, C. (Red.); Peters, I. | Journal Issue |
2007 | Futur 1.2007. Schwerpunkt: Europaweit forschen und entwickeln : Uhlmann, E. (Hrsg.); Engel, C. (Red.); Hayes, C. (Red.); Peters, I. (Red.) | Journal Issue |
2007 | Futur 2.2007. Schwerpunkt: Nachhaltigkeit in der Produktionswirtschaft : Uhlmann, E. (Hrsg.); Engel, C. (Red.); Peters, I. (Red.) | Journal Issue |
2007 | Futur 3.2007. Schwerpunkt: Mikroproduktionstechnik : Uhlmann, E. (Hrsg.); Engel, C. (Red.); Hayes, C. (Red.); Peters, I. (Red.) | Journal Issue |
2007 | Gewindefertigung Spur, G.; Uhlmann, E. | Book Article |
2007 | Grundlagen und Prozessstrategien der Mikrofunkenerosion für die Bearbeitung von Rotationsbauteilen Piltz, S. : Uhlmann, E. (Prüfer) | Dissertation |
2007 | Handbook of lapping and polishing : Marinescu, I.D.; Uhlmann, E.; Doi, T. | Book |
2007 | Handbook of machining with grinding wheels : Marinescu, I.D.; Hitchiner, M.; Uhlmann, E.; Rowe, W.; Inasaki, I. | Book |
2007 | Hybrid disassembly system Uhlmann, E.; Friedrich, T.; Harms, R.; Sönnichsen, C. | Book Article |
2007 | Hybride Fertigungsverfahren Huynh, Q.-U.; Elsner, P.; Uhlmann, E. | Journal Article |
2007 | Hybride Leistungsbündel für die Mikroproduktion Uhlmann, E.; Geisert, C.; Stelzer, C. | Journal Article |
2007 | Industrieroboter Spur, G.; Uhlmann, E. | Book Article |
2007 | Influence of diamond coatings on electrode wear in micro-EDM Uhlmann, E.; Roehner, M. | Conference Paper |
2007 | Influence of erosive production technique on the surface reaction of biomedical relevant Titanium alloy Uhlmann, E.; Huynh, Q.-U. | Conference Paper |
2007 | Innovative Schärfungstechnologie durch Ultraschall Uhlmann, E.; Boguslavskij, B.; König, J.; Schallehn, M.; Sverdlov, L. | Journal Article |
2007 | Innovative Zerspantechnologien für die Optimierung von Produktionsprozessen Uhlmann, E.; König, J.; Mattes, A.; Richarz, S.; Roeder, M.; Graf von der Schulenburg, M. | Journal Article |
2007 | Integration von Fertigungssystemen für die Serienfertigung von Kleinst- und Mikrobauteilen Uhlmann, E.; Oberschmidt, D. | Journal Article |
2007 | Interrelationship among rotation speed and process result in Wire Electrical Discharge Grinding as wear indicator Uhlmann, E.; Oberschmidt, D.; Geisert, C.; Stelzer, C. | Conference Paper |
2007 | Investigations on the adjustment of the modeling section in 2D simulation of milling processes Uhlmann, E.; Mattes, A.; Zettier, R.; Graf von der Schulenburg, M. | Conference Paper |
2007 | Kalt gestellt Uhlmann, E.; Stahl, U.; Hollan, R.; Kristan, G. | Journal Article |
2007 | Laser processing of ultra-hard cutting materials Uhlmann, E.; Mattes, A. | Conference Paper |
2007 | Machining of Al-MMC with diamond tools Uhlmann, E.; König, J. | Conference Paper |
2007 | Machining of micro rotational parts using electrical discharge machining Piltz, S.; Röhner, M.; Uhlmann, E. | Conference Paper |
2007 | Make engineering students collaborate Uhlmann, E.; Stelzer, C.; Jeschke, S.; Ludwig, N. | Conference Paper |
2007 | Mikroerozja kluczem do miniaturyzacji produkcji Uhlmann, E.; Roehner, M. | Journal Article |
2007 | Mikrofunkenerosion ergänzt Verfahren zur Mikrostrukturierung von Formen Uhlmann, E.; Roehner, M. | Journal Article |
2007 | Milling machine evolution in area of conflict between efficiency, accuracy and social ecology Uhlmann, E.; Marcks, P.; Mense, C. | Conference Paper |
2007 | Neue Konzepte für Werkzeugmaschinen : Uhlmann, E. | Conference Proceedings |
2007 | New developments in tool design for the pulsed magnetic cutting of aluminum sheet metal Uhlmann, E.; Damavandi, K.; Bayat, N. | Conference Paper |
2007 | Optimizing the feed velocity of NC-tool paths Uhlmann, E.; Mattes, A. | Conference Paper |
2007 | Performance of diamond coated cutting tools as a function of material properties Uhlmann, E.; König, J.; Durst, G.; Hilty, B.; Suess, B. | Conference Paper |
2007 | Rapid prototyping Spur, G.; Uhlmann, E. | Book Article |
2007 | Reinigen von Werkzeugen der Massivholzbearbeitung mittels CO2-Schneestrahlen Uhlmann, E.; Hoffmeister, H.-W.; Veit, R.; Strauß, H. | Journal Article |
2007 | Scaling of the milling process of tungsten-copper-composites Uhlmann, E.; Graf von der Schulenburg, M. | Conference Paper |
2007 | Schlüsseltechnologien für eine nachhaltige Produktion Uhlmann, E.; Krüger, J. | Conference Paper |
2007 | Schnellöffnende Werkzeugmaschinentür Uhlmann, E.; Duchstein, B. | Journal Article |
2007 | Spanende Werkzeugmaschinen Spur, G.; Uhlmann, E. | Book Article |
2007 | Steigerung der Leistungsfähigkeit von Diamant-Schneideinsätzen Uhlmann, E.; König, J. | Journal Article |
2007 | Steuerungsbasierte Erfassung zustandsrelevanter Life-Cycle Daten an CNC-Werkzeugmaschinen Uhlmann, E.; Geisert, C. | Book Article |
2007 | Strömungsschleifen keramischer Hochleistungswerkstoffe Uhlmann, E.; Mihotovic, V. | Book Article |
2007 | Superhard cutting tool coatings: CVD diamond and PVD cBN Uhlmann, E.; Fuentes, J.A.O.; Koenig, J. | Conference Paper |
2007 | Thermographic temperature measurement on the tool and the workpiece during milling Uhlmann, E.; Graf von der Schulenburg, M. | Conference Paper |
2007 | Ultrasonic assisted grinding of advanced ceramics Uhlmann, E.; Hübert, C. | Conference Paper |
2007 | Untersuchung der Fräsprozess-Maschineninteraktion zur Stabilitätsanalyse und Maschinenoptimierung Mense, C.; Uhlmann, E. | Conference Paper |
2007 | Verfahrensgrundlagen und Technologie des Hubschleifens mit viskosen Schleifmedien Szulczynski, H. : Uhlmann, E. (Prüfer) | Dissertation |
2007 | Verringerung thermischer Verlagerungen an Werkzeugmaschinenspindeln mittels CFK-Kompensationsstrukturen Uhlmann, E.; Marcks, P. | Conference Paper |
2007 | Wirkung des Magnetimpulsverfahrens auf die Nachhaltigkeit in der Produktentstehungsphase Uhlmann, E.; Jurgasch, D.; Rautenstrauch, A.; Damavandi, K. | Journal Article |
2007 | Zuverlässigkeit und Diagnose in der Produktion Brecher, Christian; Verl, Alexander : Krüger, Joachim (Hrsg.); Uhlmann, Eckart Gunter (Hrsg.) | Book |
2006 | 3D-Zerspansimulation einer Nickelbasislegierung Uhlmann, E.; Zettier, R. | Book Article |
2006 | Adhäsive Oberflächen-Eigenschaften - Was bringt das Trockeneisstrahlen? Uhlmann, E.; Mernissi, A. el; Hollan, R. | Journal Article |
2006 | Aerostatische Lagersysteme bestehend aus faserverstärktem keramischen Verbundwerkstoff Neumann, C.; Uhlmann, E. | Conference Paper |
2006 | Air bearings based on porous ceramic composites Uhlmann, E.; Neumann, C. | Conference Paper |
2006 | Analysis of the design of machineguard-windows using finite element analysis Uhlmann, E.; Marcks, P. | Journal Article |
2006 | Berührungsloses Umformen im Zeitraffer Jurgasch, D.; Damavandi, K.; Uhlmann, E. | Conference Paper |
2006 | Compact spherical joint with integrated strut inclination measurement system for parallel kinematics Uhlmann, E.; Neumann, C.; Tonn, N. | Journal Article |
2006 | Development and application of coated ceramic cutting tools Uhlmann, E.; Hühns, T.; Richarz, S.; Reimers, W.; Grigoriev, S. | Conference Paper |
2006 | Dreh- und Fräswerkzeuge mit cBN-Beschichtungen Uhlmann, E.; Wiemann, E.; Keunecke, M.; Richter, V. | Journal Article |
2006 | Dreh- und Fräswerkzeuge mit cBN-Beschichtungen Uhlmann, E.; Wiemann, E.; Keunecke, M.; Richter, V. | Journal Article |
2006 | Entwicklung einer 12-achsigen Parallelkinematik zur Handhabung schwerer Bauteile Früsch, I.; Friedrich, T.; Uhlmann, E. | Conference Paper |
2006 | Entwicklung und Konstruktion einer Leichtbaumaschinentür zur Steigerung der Produktivität von Werkzeugmaschinen Wittner, M.; Karrasch, I.; Uhlmann, E. | Conference Paper |
2006 | Entwicklung von Hartmetallwerkzeugen für die Mikrozerspanung mit definierter Schneide Schauer, K. : Uhlmann, E. (Prüfer) | Dissertation |
2006 | Experimentelle Untersuchungen an Wolfram-Kupfer-Verbundwerkstoffen Uhlmann, E.; Graf von der Schulenburg, M. | Conference Paper |
2006 | Futur 1.2006. Schwerpunkt: Wissen : Uhlmann, E. (Hrsg.); Ficiciyan, Y. (Red.) | Journal Issue |
2006 | Futur 2.2006. Schwerpunkt: Sicherheit und Zuverlässigkeit : Uhlmann, E. (Hrsg.); Ficiciyan, Y. (Red.) | Journal Issue |
2006 | Gradiententechnologie - Die Zukunft der Fertigungstechnik Uhlmann, E.; Elsner, P. | Conference Paper |
2006 | High precision positioning with ferrofluids as an active medium Uhlmann, E.; Bayat, N. | Journal Article |
2006 | Hochleistungsfräsen von Superlegierungen Wiemann, E. : Uhlmann, E. (Prüfer) | Dissertation |
2006 | Innovative Fräswerkzeuge für die Mikrozerspanung Uhlmann, E.; Oberschmidt, D.; Schauer, K. | Journal Article |
2006 | Innovative production technologies for a sustainable society Uhlmann, E.; König, J. | Conference Paper |
2006 | Kalt gestellt. Keimfreie Oberflächen durch Strahlen mit Trockeneis Uhlmann, E.; Stahl, U.; Veit, R.; Kristan, G. | Journal Article |
2006 | Laser assisted dry ice blasting Uhlmann, E.; Hollan, R. | Conference Paper |
2006 | A laser assisted dry ice blasting approach for surface cleaning Uhlmann, E.; Hollan, R.; Veit, R.; El-Mernissi, A. | Conference Paper |
2006 | Machining of micro tools by electrical discharge machining Uhlmann, E.; Piltz, S.; Röhner, M. | Conference Paper |
2006 | Modellbildung und Simulation innovativer Verfahren der Feinbearbeitung Uhlmann, E.; Hübert, C. | Book Article |
2006 | Modellbildung und Simulation von Steuerung und Mechanik von Parallelkinematiken mit Seilantrieben Schäper, E.; Tonn, N.; Uhlmann, E. | Conference Paper |
2006 | Monitoring of slowly progressing deterioration of CNC-machine axes Uhlmann, E.; Hohwieler, E.; Geisert, C. | Conference Paper |
2006 | Neue Einsatzmöglichkeiten von Ferrofluiden in technischen Systemen mit relativ zueinander bewegten Komponenten Bayat, N. : Uhlmann, E. (Prüfer) | Dissertation |
2006 | A new approach to the measurment of free form surfaces for micro optical applications Uhlmann, E.; Kurz, M.; Oberschmidt, D.; Blümel, T.; Kafka, R.; Osten, S.; Krüger, S. | Conference Paper |
2006 | Pilot disassembly system for automotive engines Friedrich, T.; Harms, R.; Seliger, G.; Uhlmann, E. | Conference Paper |
2006 | Remanufacturing concept for machine tools and production processes Uhlmann, E.; Friedrich, T.; Hübert, C.; Marcks, P.; Veit, R. | Conference Paper |
2006 | Removal of welded hardfacings by abrasive water jet machining Uhlmann, E.; Veit, R.; Hilse, M.; Schäfer, S. | Conference Paper |
2006 | Schleuderstrahlen mit Trockeneis Uhlmann, E.; Mernissi, A.E.; Krieg, M.; Gottheil, I. | Journal Article |
2006 | Sicherheitsanforderungen an Werkzeugmaschinenumhausungen Uhlmann, E.; Marcks, P. | Conference Paper |
2006 | Simulation der Zerspanung mit Hilfe der Finite-Elemente-Methode Uhlmann, E.; Mattes, A.; Jost, P. | Journal Article |
2006 | Spanbildungssimulation bei der Prozessanalyse Uhlmann, E.; Mattes, A. | Journal Article |
2006 | Spannsysteme zum sicheren und zerstörungsfreien Spannen von Grünlingen bei der Drehbearbeitung Mense, C.; Uhlmann, E. | Conference Paper |
2006 | Tools and processes for hybrid disassembly of automotive engines Harms, R.; Sönnichsen, C.; Friedrich, T.; Seliger, G.; Uhlmann, E. | Conference Paper |
2006 | Ultrapräzisions-Zerspanung von Stahl mit cbN ohne Bindephase Oberschmidt, D.; Uhlmann, E. | Journal Article |
2006 | Untersuchung an CVD-Diamant-Dünnschicht-Werkzeugen Uhlmann, E.; König, J. | Journal Article |
2006 | Verbesserung des dynamischen Verhaltens von Hochleistungsfräsmaschinen durch neue Strukturoptimierungsmethoden Mense, C.; Uhlmann, E. | Conference Paper |
2006 | Verfügbarkeits-Monitoring Uhlmann, E.; Hohwieler, E.; Geisert, C. | Journal Article |
2006 | Vorrichtung und Verfahren zum Schleuderstrahlen von empfindlichen Strahlmitteln, insbesondere Trockeneis Krieg, M.; El-Mernissi, A.; Gottheil, I.; Uhlmann, E. | Patent |
2005 | Auslegung dünner Hartstoffschichten für Zerspanwerkzeuge Klein, K. : Uhlmann, E. (Prüfer) | Dissertation |
2005 | Erstes Schichtsystem mit kubischem Bornitrid (cBN) für Fräswerkzeuge Uhlmann, E.; Wiemann, E.; Keunecke, M. | Journal Article |
2005 | Konditionieren von Diamantschleifscheiben Sroka, F. : Uhlmann, E. (Prüfer) | Dissertation |
2005 | Machining of micro/miniature dies and moulds by electrical discharge machining - Recent development Uhlmann, E.; Piltz, S.; Doll, U. | Conference Paper, Journal Article |
2005 | Sicherheitszentrierte Architektur für Internet-basierte Dienste im Maschinen- und Anlagenbau Berger, R. : Uhlmann, E. (Prüfer) | Dissertation |
2005 | Verfahren und Systeme zur Demontage komplexer technischer Gebrauchsgüter Härtwig, J.-P. : Uhlmann, E. (Prüfer) | Dissertation |
2004 | Blasting techniques for disassembly and remanufacturing Uhlmann, E.; Mernissi, A. el; Dittberner, J. | Conference Paper |
2004 | CBN coatings on cutting tools Uhlmann, E.; Bräuer, G.; Wiemann, E.; Keunecke, M. | Journal Article |
2004 | e-Anlagen-Services: Elektronische Dienstleistungsangebote im After-Sales-Bereich Uhlmann, E.; Hohwieler, E. | Journal Article |
2004 | Hot-embossing of opto-fluidic structures with ultra-precision-milled dies Uhlmann, E. | Conference Paper |
2004 | Innovative manufacturing technologies for the disassembly of consumer goods Uhlmann, E.; Elbing, F.; Dittberner, J. | Journal Article |
2004 | Kooperationsplattform für den Werkzeug- und Formenbau: Unternehmensübergreifende Zusammenarbeit in der Produktion von komplexen Betriebsmitteln Uhlmann, E.; Yalniz, Z. | Journal Article |
2004 | Optimierung von Mikrofräswerkzeugen in der Werkzeugplanungsphase Uhlmann, E.; Füting, M.; Schauer, K. | Journal Article |
2004 | Precise finishing of inner contours with abrasive flow machining (AFM) Uhlmann, E.; Szulczynski, H. | Conference Paper |
2004 | Providing online services for machine operation and maintenance Uhlmann, E.; Hohwieler, E.; Berger, R. | Conference Paper |
2004 | Sensorische Werkzeugbeschichtungen messen Temperaturen und Kräfte im Zerspanprozess Wiemann, E.; Lüthje, H.; Uhlmann, E. | Journal Article |
2004 | Strömungsschleifen von Hochleistungskeramik Uhlmann, E.; Szulczynski, H. | Journal Article |
2004 | Trennende Schutzeinrichtungen für Werkzeugmaschinen zur Hochgeschwindigkeitsbearbeitung Bold, J. : Uhlmann, E. (Prüfer) | Dissertation |
2004 | Ultra-precision milling of mechanical components and functionality systems for optical and electrooptical modules Uhlmann, E. | Conference Paper |
2004 | Ultraschallunterstütztes Quer-Seiten-Schleifen Daus, N.-A. : Uhlmann, E. (Prüfer) | Dissertation |
2004 | Verschleißmechanismen beim Strömungsschleifen® Uhlmann, E.; Szulczynski, H. | Journal Article |
2004 | Vom Teleservice zu e-Maintenance-Lösungen Uhlmann, E. | Book Article |
2004 | Wear mechanisms of mono- and multi-layer CVD diamond films Uhlmann, E.; Kott, R.; Hübert, C. | Journal Article |
2004 | Werkzeuge zum impulsmagnetischen Warmfügen von Profilen aus Aluminium- und Magnesiumlegierungen Hahn, R. : Uhlmann, E. (Prüfer) | Dissertation |
2004 | Widerstand ist zwecklos - Keramische Schneidstoffe ermöglichen prozesssicheres Hochleistungsfräsen hochwarmfester Werkstoffe Uhlmann, E.; Wiemann, E. | Journal Article |
2004 | Winzlinge auf dem Vormarsch Uhlmann, E.; Doll, U.; Piltz, S. | Journal Article |
2004 | Zeitgemäß Spanen im Automobilbau Uhlmann, E.; Herter, S.; Koenig, J.; Kott, R.; Wiemann, E. | Journal Article |
2003 | Aufbau hierarchiearmer Produktionsnetzwerke - Technologiestrategische Option und organisatorische Gestaltungsaufgabe Schröder, C.S. : Spur, G.; Uhlmann, E. | Book |
2003 | Berechnungsmodell zur Ermittlung von Spannkräften bei Backenfuttern Feng, P. : Uhlmann, E. (Prüfer) | Dissertation |
2003 | CVD-Diamant als Schneidstoff Brücher, M. : Uhlmann, E. (Prüfer) | Dissertation |
2003 | Einrichtung zur Erfassung der Relativposition zweier zueinander bewegbarer Koerper Uhlmann, E.; Seibt, M.; Haertwig, J.; Schaeper, E. | Patent |
2003 | Hochharte CBN-Werkzeugbeschichtung in weltweit ersten Drehversuchen Uhlmann, E.; Wiemann, E.; Bräuer, G.; Keunecke, M. | Journal Article |
2003 | More efficient cutting processes due to the heat-spreading effect of CVD diamond Uhlmann, E.; Wörner, E.; Brücher, M. | Journal Article |
2002 | Adhesive wear on CVD diamond Uhlmann, E.; Friemel, J.; Brucher, M. | Journal Article |
2002 | Application of magnetic fluids in tribotechnical systems Uhlmann, E.; Spur, G.; Bayat, N.; Patzwald, R. | Journal Article |
2002 | Applications for eco-efficient surface machining with dry ice blasting Uhlmann, E.; Elbing, F.; Mernissi, A. el | Conference Paper |
2002 | Computer-aided safety at machine tools Spur, G.; Uhlmann, E.; Ising, M. | Journal Article |
2002 | Destructive disassembly of home applicances Keil, T.; Härtwig, J.-P.; Uhlmann, E. | Conference Paper |
2002 | Fachkraft für die Materialbearbeitung durch Laserstrahl. Tl.8: Materialbearbeitung mittels Laserstrahlschneiden Uhlmann, E.; Hoppe, A. | Journal Article |
2002 | Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Produktionstechnisches Zentrum Berlin. Jahresbericht 2001 : Seliger, G.; Uhlmann, E. | Annual Report |
2002 | Honwerkzeug zum Bearbeiten von Oberflaechen Gaebler, J.; Matthee, T.; Sroka, F.; Lachmund, U.; Uhlmann, E. | Patent |
2002 | Innovative machining technologies and tools for the disassembly of consumer goods Uhlmann, E.; Spur, G.; Elbing, F.; Dittberner, J. | Conference Paper |
2002 | Klebflächenvorbehandlung von Aluminiumbauteilen Uhlmann, E.; Dorn, L.; Elbing, F.; Anagreh, N. | Journal Article |
2002 | Kubische Bornitrid-Schichten - Potenziale für die Zerspanung im Werkzeug- und Formenbau Uhlmann, E.; Wiemann, E. | Journal Article |
2002 | Leistungsfähigere Zerspanprozesse durch die wärmespreizende Wirkung von CVD-Diamant? Uhlmann, E.; Wörner, E.; Brücher, M. | Journal Article |
2002 | Mehr als nur ein Reinigungsverfahren - Möglichkeiten des Trockeneisstrahlens Uhlmann, E.; Spur, G.; Elbing, F. | Journal Article |
2002 | Mikrozerspanung metallischer Verbundwerkstoffe Uhlmann, E.; Piltz, S.; Schauer, K. | Journal Article |
2002 | Oxidation wear of CVD-diamond Uhlmann, E.; Schäfer, L.; Gäbler, J.; Brücher, M. | Conference Paper |
2002 | Pose optimization of parallel kinematic machines Uhlmann, E.; Xiong-Wei, L.; Schäper, E.; Neumann, C. | Journal Article |
2002 | Die Prozesskette beherrschen. Editorial Uhlmann, E. | Journal Article |
2002 | Trockeneisstrahlen von Aluminiumoberflächen - Zur Festigkeitssteigerung von Klebverbindungen Uhlmann, E.; Elbing, F. | Journal Article |
2002 | Verfahren und Vorrichtung zur Feinstbearbeitung von Oberflaechen Uhlmann, E.; Kruska, M. | Patent |
2002 | Wear behavior of CVD-diamond tools Uhlmann, E.; Brücher, M. | Journal Article |
2001 | Adhäsiver Verschleiß an CVD-Diamant Uhlmann, E.; Friemel, J.; Brücher, M. | Journal Article |
2001 | Analysis of compounding and injection moulding process of ceramic powders Uhlmann, E.; Elsner, P. | Conference Paper |
2001 | Beitrag zum Greifen von Textilien Stephan, J. : Uhlmann, E. (Prüfer) | Dissertation |
2001 | CVD-Diamantschichten als Schneidstoff Uhlmann, E.; Brücher, M. | Journal Article |
2001 | Development of flexible automatic disassembly processes and cleaning technologies for the recycling of consumer goods Uhlmann, E.; Spur, G.; Elbing, F. | Conference Paper |
2001 | Eco-efficient cleaning technology for tubes and pipelines using dry ice blasting Uhlmann, E.; Krieg, M.; Elbing, F. | Conference Paper |
2001 | Effektives Intertask-Kommunikationssystem mit offener Datenstruktur für modulare Steuerungssysteme Uhlmann, E.; Weck, M.; Sorowka, D. | Book Article |
2001 | Electrical Discharge Grinding (EDG) using microstructures disk electrodes Uhlmann, E.; Piltz, S.; Doll, U. | Journal Article |
2001 | Electrical discharge grinding of microstructures Uhlmann, E.; Doll, U.; Piltz, S. | Journal Article |
2001 | Entwickeln und Produzieren in Netzwerken und Verbünden Uhlmann, E. | Journal Article |
2001 | Fabrikbetrieb im Wandel - Optionen für die Zukunft Uhlmann, E. | Journal Article |
2001 | Fraunhofer-Institut für Produktionsanlagen und Konstruktionstechnik. Produktionstechnisches Zentrum Berlin. Jahresbericht 2000 : Seliger, G.; Uhlmann, E. | Annual Report |
2001 | Fundamental flow process of abrasive flow machining Uhlmann, E.; Szulczynski, H. | Conference Paper |
2001 | Funkenerosion in der Mikrotechnik - Einsatzgebiete und Verfahrensgrenzen Uhlmann, E.; Piltz, S.; Doll, U. | Journal Article |
2001 | Gewindefertigung Spur, G.; Uhlmann, E. | Book Article |
2001 | High precision manufacturing using PEM Uhlmann, E.; Doll, U.; Förster, R.; Nase, R.; Schikofsky, R. | Conference Paper |
2001 | Impact of diamond geometry on removal mechanisms during machining of GaAs Uhlmann, E.; Engel, H.; Hammer, R.; Paesler, C. | Conference Paper |
2001 | Industrial cleaning technologies for hard surfaces: Dry ice blasting and laser Elbing, F.; Spur, G.; Uhlmann, E.; Krieg, M. | Conference Paper |
2001 | Industrieroboter Spur, G.; Uhlmann, E. | Book Article |
2001 | Institut fur Werkzeugmaschinen und Fabrikbetrieb. Bereich Technologie Uhlmann, E. | Journal Article |
2001 | Integrierte Unternehmensplanung auf der Basis von Unternehmensmodellen Jochem, R.; Uhlmann, E. | Dissertation |
2001 | Machining of a hypereutectic aluminium-silicon alloy Uhlmann, E.; Friemel, J.; Brucher, M. | Journal Article |
2001 | Maschinen und vernetzte Produktion von morgen Uhlmann, E.; Dorn, L. | Conference Paper |
2001 | Medizinroboter - Von der Idee zum Produkt Lüth, T.; Uhlmann, E.; Bier, J. | Conference Paper |
2001 | Pilot disassembly system Uhlmann, E.; Seliger, G.; Härtwig, J.-P.; Keil, T. | Journal Article |
2001 | Rapid Prototyping Spur, G.; Uhlmann, E. | Book Article |
2001 | Regelungsverfahren für Parallelkinematiken bei kraftschlüssigen Prozessen Surdilovic, D.; Uhlmann, E. | Book Article |
2001 | S/4 method for the analysis of residual stress induced failure in thin films Uhlmann, E.; Klein, K. | Journal Article |
2001 | Spanende Werkzeugmaschinen Spur, G.; Uhlmann, E. | Book Article |
2001 | Strömungssimulation von Bearbeitungsprozessen Uhlmann, E.; Frost, T.; Szulczynski, H.; Piltz, S. | Journal Article |
2001 | Tool wear during turning of titanium aluminide intermetallics Uhlmann, E.; Schauerte, O.; Brücher, M.; Herter, S. | Journal Article |
2001 | Turning of ceramics with diamond tools Uhlmann, E.; Rabe, H.; Bublath, B.; Brücher, M. | Journal Article |
2001 | Ultrasonic assisted face grinding and cross-peripheral grinding of ceramics Uhlmann, E.; Daus, N.-A. | Conference Paper |
2001 | Unternehmenswerte durch Technologie. Vorträge X. Internationales Produktionstechnisches Kolloquium PTK 2001 : Uhlmann, E. | Conference Proceedings |
2001 | Untersuchungen zum Oxidationsverschleiß von diamantbasierten Schneidstoffen Uhlmann, E.; Brücher, M. | Journal Article |
2001 | Visuell unterstütztes Lageregelungssystem für Industrieroboter Kwon, Y.-U. : Uhlmann, E. (Prüfer) | Dissertation |
2001 | Werkzeugmaschine sowie Verfahren zur hochpraezisen raeumlichen Anordnung eines Werkzeugs oder Werkstuecks Uhlmann, E.; Mette, U.; Haertwig, J.; Seibt, M.; Schaeper, E. | Patent |
2000 | Analysis of force signals in HSC-turning for process monitoring Uhlmann, E.; Hohwieler, E.; Geisert, C.; Becker, F. | Conference Paper |
2000 | Ein Ansatz zum Konstruieren mit Lösungsräumen Ziebeil, P. : Uhlmann, E. (Prüfer) | Dissertation |
2000 | Bearbeitung einer übereutektischen Aluminium-Silizium-Legierung mit verschiedenen Diamantschneidstoffen Uhlmann, E.; Friemel, J.; Brücher, M. | Journal Article |
2000 | Bearbeitungsbedingte Randzonenbeeinflussung von keramischen Werkstoffen durch ultraschallunterstütztes Schleifen Uhlmann, E.; Holl, S.-E.; Daus, N.-A. | Book Article |
2000 | Bildanalysesystem zur robusten Erkennung von Kennzeichen an Fahrzeugen Lohmann, L. : Uhlmann, E. (Prüfer) | Dissertation |
2000 | Drehen von Keramiken mit Diamantwerkzeugen Uhlmann, E.; Rabe, H.; Bublath, B.; Brücher, M. | Journal Article |
2000 | Einfluss der Relativbewegung auf den Prozess und das Arbeitsergebnis beim Planschleifen mit Planetenkinematik Ardelt, T. : Uhlmann, E. (Prüfer) | Dissertation |
2000 | Feasibility studies for the turning of ceramics Uhlmann, E.; Rabe, H.; Bublath, B.; Brücher, M. | Conference Paper |
2000 | Fertigungstechnologien zur hochgenauen Endbearbeitung : Spur, G.; Uhlmann, E. | Conference Proceedings |
2000 | Flexible automatic disassembly for the recycling of consumer goods Uhlmann, E.; Spur, G.; Elbing, F.; Dittberner, J.; Sundaresan, S.; Thantry, P.B. | Conference Paper |
2000 | Historische Entwicklung von CVD-Diamant als Schneidstoff Uhlmann, E.; Brücher, M. | Conference Paper |
2000 | Hochgeschwindigkeitsdrehen von Inconel 718 Uhlmann, E.; Elbing, F. | Journal Article |
2000 | Integrated product and process design of machine tools Spur, G.; Uhlmann, E.; Ising, M. | Conference Paper |
2000 | Intelligent gripping-systems for high-speed-turning Spur, G.; Uhlmann, E.; Mette, U. | Conference Paper |
2000 | Investigations on the ductile mode surface formation in surface grinding of monocrystalline silicon Uhlmann, E.; Spur, G.; Paesler, C.; Engel, H. | Conference Paper |
2000 | Kinematik und Prozessverlauf beim Planschleifen auf Läppmaschinen Uhlmann, E.; Ardelt, T. | Conference Paper |
2000 | Konstruktive Berechnungsmodelle auf Basis Neuronaler Netze Carl, A. : Uhlmann, E. (Prüfer) | Dissertation |
2000 | Konzeption eines webbasierten Beratungs-Unterstützungs-Systems am Fallbeispiel einer PDM-Systemauswahl Kahlert, T. : Uhlmann, E. (Prüfer) | Dissertation |
2000 | Machine tool design and safety optimization Spur, G.; Uhlmann, E.; Ising, M. | Conference Paper |
2000 | Magnetische Flüssigkeiten als Schmierstoff in hydrodynamischen Radialgleitlagern Spur, G.; Uhlmann, E.; Patzwald, R. | Journal Article |
2000 | Mikrofunkenerosion zur Fertigung von Mikrosystemen Uhlmann, E.; Doll, U. | Book Article |
2000 | Mit optimierter Kühlschmierung hochharte Werkstoffe schleifen Spur, G.; Uhlmann, E.; Brücher, T.; Laufer, J.; Szulczynski, H. | Journal Article |
2000 | Modifizierter ECM-Abtrag erhöht die Bauteilgenauigkeit Uhlmann, E.; Doll, U.; Förster, R.; Schikofsky, R.; Nase, R. | Journal Article |
2000 | Pilot disassembly system for home appliances using a new twelve degrees of freedom parallel manipulator Uhlmann, E.; Spur, G.; Härtwig, J.-P.; Seibt, M. | Conference Paper |
2000 | A pilot system for the disassembly of home appliances using new tools and concepts Uhlmann, E.; Seliger, G.; Haertwig, J.-P.; Keil, T. | Conference Paper |
2000 | Planung und marktorientierter Betrieb von Demontagefabriken Perlewitz, H. : Uhlmann, E. (Prüfer) | Dissertation |
2000 | Processing difficult-to-machine materials Uhlmann, E.; Brücher, M. | Book Article |
2000 | Pulsed magnetic hot forming of aluminium alloys Uhlmann, E.; Hahn, R. | Conference Paper |
2000 | Rapid Styling Validation - Berechnung und Simulation in der Konzeptphase der Produktentwicklung Bock, Y. : Uhlmann, E. (Prüfer) | Dissertation |
2000 | Realisierung eines Pilot-Demontagesystems Seliger, G.; Uhlmann, E.; Keil, T.; Härtwig, J.-P. | Journal Article |
2000 | Schleifen planparalleler Funktionsflächen Uhlmann, E.; Ardelt, Th.; Rußner, C.; Magg, T.; Reiser, A. | Journal Article |
2000 | Simulation von Produktentwicklungsprozessen Raupach, H.-C. : Uhlmann, E. (Prüfer) | Dissertation |
2000 | Stress design in hard coatings Uhlmann, E.; Holl, S.-E.; Daus, N.-A. | Journal Article |
2000 | Technologische und ökologische Aspekte der Kühlschmierung beim Schleifen hochharter Werkstoffe Spur, G.; Uhlmann, E.; Laufer, J. | Book Article |
2000 | Three-dimensional roughness values for the functional characterization of ceramic surfaces Uhlmann, E.; Förster, R.; Laufer, J.; Sroka, F. | Conference Paper |
2000 | Umweltfreundliche Reinigungstechnologie für die Wiederverwendung elektronischer Baugruppen Uhlmann, E.; Elbing, F. | Journal Article |
2000 | Verfahrensentwicklungen zum zerstörenden Zertrennen Uhlmann, E.; Dittberner, J. | Journal Article |
2000 | Wear behavior of HFCVD-diamond coated carbide and ceramic tools Uhlmann, E.; Lachmund, U.; Brücher, M. | Journal Article |
2000 | Werkstückspannsysteme aus faserverstärkten Kunststoffen für die Hochgeschwindigkeitsdrehbearbeitung Mette, U. : Uhlmann, E. (Prüfer) | Dissertation |
1999 | Analysis and monitoring of turning and milling processes Beule, D.; Herzel, H.; Engel, H.; Schöll, E.; Spur, G.; Uhlmann, E.; Krüger, J. | Conference Paper |
1999 | Application of µ-EDM in the machining of micro structured forming tools Uhlmann, E.; Spur, G.; Doll, U. | Conference Paper |
1999 | Arbeitsschutz und Maschinensicherheit Uhlmann, E.; Bold, J.; Ising, M. | Journal Article |
1999 | Aufpralluntersuchungen an Maschinenkapselungen Spur, G.; Uhlmann, E.; Mette, U. | Journal Article |
1999 | Cleaning and decoating in disassembly Uhlmann, E.; Axmann, B.; Elbing, F. | Conference Paper |
1999 | A design system for the safety-integrated development of machine tools Spur, G.; Uhlmann, E.; Ising, M. | Conference Paper |
1999 | Detecting nonlinearities in time series of machining processes Beule, D.; Herzel, H.; Uhlmann, E.; Krüger, J.; Becker, F. | Conference Paper |
1999 | Development of a process control strategy for selective laser sintering Uhlmann, E.; Krause, F.-L.; Dreher, S.; Elsner, P.; Frost, T. | Journal Article |
1999 | Dimensioning and design of separating safeguards Uhlmann, E.; Bold, J.; Ising, M. | Journal Article |
1999 | Dry-ice blasting for cleaning: Process, optimization and application Spur, G.; Uhlmann, E.; Elbing, F. | Conference Paper |
1999 | Duktile Bearbeitung von Silicium-Wafern Uhlmann, E.; Engel, H.; Paesler, C. | Journal Article |
1999 | The eco-efficient cleaning technology of dry-ice blasting for the reuse of electronic components of mounted printed-circuit boards Uhlmann, E.; Elbing, F. | Conference Paper |
1999 | Fast disassembly of point forming and welded connections Uhlmann, E.; Axmann, B.; Elbing, F. | Conference Paper |
1999 | Ferrofluide als Gleitlagerschmierstoff Spur, G.; Uhlmann, E.; Patzwald, R. | Conference Paper |
1999 | Flachumformen mit Impulsmagnetfeldern Uhlmann, E.; Forstmann, U.; Scholz, M. | Journal Article |
1999 | Herausforderungen für den Werkzeug- und Formenbau in der Region Berlin-Brandenburg Uhlmann, E.; Kröning, R.; Schröder, C. | Journal Article |
1999 | Influence of kinematics on the face grinding process of lapping machines Uhlmann, E.; Ardelt, T. | Journal Article |
1999 | Influences on surface and subsurface during ultrasonic assisted grinding of advanced ceramics Spur, G.; Uhlmann, E.; Holl, S.-E.; Daus, N.-A. | Conference Paper |
1999 | Innovative Schleifverfahren zur Keramikbearbeitung. Teil 1: Ultraschallunterstütztes Schleifen, Planschleifen mit Läppkinematik Uhlmann, E.; Holl, P.; Ardelt, Th.; Sroka, F.; Laufer, J. | Journal Article |
1999 | Innovative Schleifverfahren zur Keramikbearbeitung. Teil 2: Abrichttechnologie und Kühlschmierung Uhlmann, E.; Holl, S.-E.; Ardelt, Th.; Sroka, F.; Laufer, J. | Journal Article |
1999 | Intelligent process monitoring Uhlmann, E.; Fries, E. | Journal Article |
1999 | Machining of contours by ultrasonic assisted grinding Uhlmann, E.; Spur, G.; Holl, S.-E.; Ardelt, T. | Conference Paper |
1999 | Magnetische Flüssigkeiten als Schmierstoff in hydrodynamischen Radialgleitlagern Spur, G.; Uhlmann, E.; Patzwald, R. | Conference Paper |
1999 | Model of kerf and simulation of damage in abrasive water jet cutting Uhlmann, E.; Axmann, B.; Elbing, F. | Journal Article |
1999 | Montagesystemplanung und -steuerung für die variantenreiche Serienmontage Chang, K.-W. : Uhlmann, E. (Prüfer) | Dissertation |
1999 | New structures and methods for control-integrated process supervision Uhlmann, E.; Hohwieler, E.; Becker, F. | Conference Paper |
1999 | On the effect of path curves on process and wheel wear in face grinding on lapping machines Uhlmann, E.; Spur, G.; Ardelt, T. | Conference Paper |
1999 | Optimisation of the deep-drawing process with ultrasonic signals Spur, G.; Uhlmann, E.; Scholz, M. | Conference Paper |
1999 | Planschleifen mit Läppkinematik Uhlmann, E.; Ardelt, T.; Stingl, P.; Rußner, C.; Magg, T.; Reiser, A. | Journal Article |
1999 | Process study and optimisation for cleaning of metal and plastic parts by dry-ice blasting Spur, G.; Uhlmann, E.; Elbing, F. | Conference Paper |
1999 | Rechnerunterstützte Arbeitssicherheit an Werkzeugmaschinen Uhlmann, E.; Ising, M. | Journal Article |
1999 | Regionale Stärken für globale Chancen Uhlmann, E. | Journal Article |
1999 | Rückhaltefähigkeit trennender Schutzeinrichtungen Uhlmann, E.; Ising, M. | Journal Article |
1999 | Safety-integrated development of machine tools Spur, G.; Uhlmann, E.; Ising, M. | Conference Paper |
1999 | Single grain scratch tests on GaAs for the determination of relevant engaging parameters for a ductile material removal Uhlmann, E.; Engel, H.; Hammer, R.; Paesler, C. | Conference Paper |
1999 | Trockeneisstrahlen - Neue Anwendungsgebiete Uhlmann, E.; Elbing, F. | Journal Article |
1999 | Ultraschallunterstütztes Schleifen Uhlmann, E. | Conference Paper |
1999 | Virtualisierung der Werkzeugmaschinenentwicklung Spur, G.; Uhlmann, E.; Ising, M. | Journal Article |
1999 | Wear phenomena on diamond-coated carbide tools Uhlmann, E.; Lachmund, U.; Brücher, M. | Conference Paper |
1999 | WEDM of microstructured component parts. Heat conduction model Spur, G.; Uhlmann, E.; Doll, U.; Daus, N.-A. | Journal Article |
1998 | Agile Produktion als Antwort auf den Wandel der Märkte Schröder, C.; Uhlmann, E. | Journal Article |
1998 | Chip Formation and Sub-surface Damage in Ductile Mode Grinding of Semiconductors Uhlmann, E.; Engel, H.; Paesler, C. | Conference Paper |
1998 | Diamond tools in external cylindrical grinding Uhlmann, E.; Spur, G.; Sroka, F. | Conference Paper |
1998 | Entwicklungen beim Schleifen keramischer Werkstoffe Uhlmann, E.; Holl, S.-E. | Conference Paper |
1998 | Fertigungstechnik Uhlmann, E.; Doll, U.; Brücher, M. | Journal Article |
1998 | Flexible Spannbacken für die Drehbearbeitung Bahrke, U. : Uhlmann, E. (Prüfer) | Dissertation |
1998 | Heat conduction model for wire electrical discharge machining of PCD Uhlmann, E.; Spur, G.; Appel, S.; Daus, N.-A. | Journal Article |
1998 | Impulsmagnetische Umformung. Ein Verfahren mit Zukunftspotential Uhlmann, E.; Forstmann, U. | Journal Article |
1998 | Intelligent process monitoring. Key technology for performance enhancement in die and mould making Uhlmann, E.; Fries, E. | Conference Paper |
1998 | Kinematics and wheel wear in face grinding on lapping machines Uhlmann, E.; Ardelt, T. | Conference Paper |
1998 | Kinematische Analyse von Zweischeibenmaschinen Uhlmann, E.; Ardelt, T.; Daus, N. | Journal Article |
1998 | Kompetenzzentrum Strahlverfahren Uhlmann, E.; Axmann, B.; Elbing, F. | Journal Article |
1998 | Model for Kerf profile and jet velocity in abrasive water jets Uhlmann, E.; Axmann, B.; Elbing, F. | Conference Paper |
1998 | Neue innovative Kompetenzfelder Uhlmann, E. | Journal Article |
1998 | A new type of gripping system with parallel kinematics Spur, G.; Uhlmann, E.; Seibt, M. | Journal Article |
1998 | Optimization possibilities of cooling lubrication during grinding of ultrahard materials Uhlmann, E.; Laufer, J. | Conference Paper |
1998 | Planung und Optimierung von Fertigungsprozessen Uhlmann, E.; Jochem, R. | Conference Paper |
1998 | Regionale Stärken für globale Chancen durch technologische Innovationen Uhlmann, E. | Conference Paper |
1998 | Reinigen mit Trockeneisstrahlen in der Austauschmotorenfertigung Uhlmann, E.; Axmann, B.; Elbing, F. | Journal Article |
1998 | Schwer zerspanbare Werkstoffe ultraschallunterstützt schleifen Uhlmann, E.; Holl, S.-E. | Journal Article |
1998 | Strahlstoßkraftmessung beim Strahlen mit CO2-Pellets Uhlmann, E.; Axmann, B.; Elbing, F. | Journal Article |
1998 | Surface formation in creep feed grinding of advanced ceramics with and without ultrasonic assistance Uhlmann, E. | Journal Article |
1998 | Technological and ecological aspects of cooling lubrication during grinding of ultrahard materials Uhlmann, E.; Laufer, J. | Journal Article |
1998 | Technological and ecological aspects of cooling lubrication during grinding of ultrahard materials Spur, G.; Uhlmann, E.; Laufer, J. | Conference Paper |
1998 | Trockeneisstrahlen. Neue Erkenntnisse durch Hochgeschwindigkeits-Videographie Uhlmann, E.; Axmann, B.; Elbing, F. | Journal Article |
1998 | Ultrasonic assisted grinding of ceramics Spur, G.; Uhlmann, E.; Holl, S.-E. | Conference Paper |
1998 | Vorrichtung und Verfahren zur Pruefung der Gestalt einer Oberflaeche eines zu vermessenden Objektes Koerner, K.; Fritz, H.; Nyarsik, L.; Spur, G.; Uhlmann, E. | Patent |
1998 | WEDM of microstructured component parts Uhlmann, E.; Appel, S.; Doll, U. | Conference Paper |
1993 | Bearbeitbarkeit keramischer Werkstoffe Uhlmann, E.; Brücher, T. | Conference Paper |
1993 | Grazing-incidence interference microscopy for the measurement of topography of fine-machined surfaces Spur, G.; Körner, K.; Nyarsik, L.; Fritz, H.; Uhlmann, E. | Conference Paper |
1993 | Keramikgerechte Konditionierung von Diamantschleifscheiben Uhlmann, E. | Conference Paper |
1993 | Tiefschleifen von Nichtoxid- und Oxidkeramiken Uhlmann, E. | Conference Paper |
1991 | Darstellung der Aktivitäten und Zielsetzungen des Demonstrationszentrums für Faserverbundkunststoffe -FVK-TT- Uhlmann, E.; Krismann, U.; Liebetrau, M.; Seliger, G. | Conference Paper |
1989 | Bearbeitung von Keramik Spur, G.; Uhlmann, E. | Book Article |
1989 | Keramikbearbeitung - Schleifen, Honen, Läppen, Abtragen Spur, G. : Linke, K.; Sabotka, I.; Tio, T.H.; Uhlmann, E. | Book |
1986 | Tiefschleifen von Nichtoxidkeramiken mit Diamantschleifscheiben Spur, G.; Uhlmann, E.; Stark, C. | Journal Article |