Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Manufacturing and properties of metal parts made by fused filament fabrication
Andresen, Olaf; Riecker, Sebastian; Studnitzky, Thomas; Hein, Sebastian Boris; Lohse, Uwe; Kleback, Bernd
Conference Paper
20173D printing of metal parts by means of fused filament fabrication - A non beam-based approach
Riecker, S.; Hein, S.B.; Studnitzky, T.; Andersen, O.; Kieback, B.
Conference Paper
20173D screen printing - Analysis of tolerances to print high quality metallic structures
Reuter, K.; Wiedenmann, S.; Studnitzky, T.; Andersen, O.; Kieback, B.
Conference Paper
2017Additive manufacturing of high performance copper heat exchangers via 3D screen printing
Reuter, K.; Rohne, M.; Studnitzky, T.; Andersen, O.; Kieback, B.
Conference Paper
2017Additive manufacturing using 3D screen printing
Dressler, M.; Studnitzky, T.; Kieback, B.
Conference Paper
2017Integrated process line for fused filament fabrication of metallic parts using metal powder loaded filaments
Riecker, S.; Andersen, O.; Hein, S.B.; Studnitzky, T.; Kieback, B.
Conference Paper
2017Verfahren zur Herstellung von Stents und damit hergestellte Stents
Quadbeck, Peter; Jurisch, Marie; Studnitzky, Thomas; Kieback, Bernd
Patent
20163D screen and stencil printing: Real mass production for metals, ceramics and their combinations
Studnitzky, T.; Dressler, M.; Jurisch, M.; Reuter, K.; Riecker, S.; StrauÃ, A.; Kieback, B.
Conference Paper
20163D screen printing-additive manufacturing of finely structured titanium based parts
Jurisch, M.; Studnitzky, T.; Andersen, O.; Kieback, B.
Conference Paper
2016Fused deposition modeling-opportunities for cheap metal AM
Riecker, S.; Clouse, J.; Studnitzky, T.; Andersen, O.; Kieback, B.
Conference Paper
2016Micro parts manufacturing by powder metallurgy (Micro PM)
Kieback, B.; Dressler, M.; Jurisch, M.; Reuter, K.; Riecker, S.; Studnitzky, T.
Conference Paper
2016New opportunities in centrifugal powder compaction
Riecker, S.; Studnitzky, T.; Andersen, O.; Kieback, B.
Conference Paper
2016Thermohydrogen processing of 3D screen printed titanium parts
Jurisch, M.; Studnitzky, T.; Andersen, O.; Kieback, B.
Conference Paper
20153D screen printing for the fabrication of small intricate Ti-6Al-4V parts
Jurisch, M.; Studnitzky, T.; Andersen, O.; Kieback, B.
Journal Article
2015Wärmeübertragungsvorrichtung und deren Verwendung
Schnabel, Lena; Laurenz, Eric; Studnitzky, Thomas; Fugmann, Hannes; Kaina, Steffen
Patent
20143D multi-material metal printing of delicate structures
Riecker, S.; Studnitzky, T.; Andersen, O.; Kieback, B.
Conference Paper
20143D screen printing for the fabrication of small intricate Ti-6Al-4V parts
Jurisch, M.; Studnitzky, T.; Andersen, O.; Kieback, B.
Conference Paper
2014Generative Fertigung in großen Stückzahlen - Der 3D-Siebdruck
Studnitzky, T.; Jurisch, M.; Andersen, O.; Kieback, B.
Conference Paper
2014Highly porous magnesium alloy structures and their properties regarding degradable implant application
Morgenthal, I.; Andersen, O.; Kostmann, C.; Stephani, G.; Studnitzky, T.; Witte, F.; Kieback, B.
Journal Article
20133D-Siebdruck - Vorreiter für die flexible generative Fertigung
Jurisch, M.; Studnitzky, T.; Andersen, O.; Kieback, B.
Journal Article
2013Dreidimensionaler Siebdruck als material-, energie- und kosteneffiziente Fertigungsmethode für Komponenten elektromagnetischer Energiewandlungssysteme
Lindner, M.; Rudolph, J.; Bräuer, P.; Werner, R.; Riecker, S.; Studnitzky, T.; Kieback, B.
Conference Paper
2013Implantat
Andersen, Olaf; Morgenthal, Ingrid; Studnitzky, Thomas; Witte, Frank
Patent
2013In vitro and in vivo evaluation of biodegradable, open-porous scaffolds made of sintered magnesium W4 short fibres
Bobe, K.; Willbold, E.; Morgenthal, I.; Andersen, O.; Studnitzky, T.; Nellesen, J.; Tillmann, W.; Vogt, C.; Vano, K.; Witte, F.
Journal Article
20123D Screen Printing technology-Opportunities to use revolutionary materials and machine designs
Bräuer, P.; Lindner, M.; Studnitzky, T.; Kieback, B.; Rudolph, J.; Werner, R.; Krause, G.
Conference Paper
2012Highly heat conductive open-porous aluminium fibre based parts for advanced heat transfer applications
Andersen, O.; Meinert, J.; Studnitzky, T.; Stephani, G.; Kieback, B.
Journal Article
2012Multi-material brake disk concept utilising 3D wire structures for weight savings and improved venting behaviour
Andersen, O.; Kaina, S.; Studnitzky, T.; Stephani, G.; Saame, C.; Münchhoff, J.; Mayer, R.; Kieback, B.
Conference Paper
2011Bremsscheibe
Andersen, O.; Studnitzky, T.; Stephani, G.; Mayer, R.
Patent
2011Elektrischer Energiewandler und Verfahren zu seiner Herstellung
Studnitzky, Thomas; Stephani, Günter
Patent
2011Mechanical properties of cellular solids produced from hollow stainless steel spheres
Roy, S.; Wanner, A.; Beck, T.; Studnitzky, T.; Stephani, G.
Journal Article
2011Neues Verfahren zur Brennstoff-Zellenfertigung
Studnitzky, T.; Heinzel, A.
Journal Article
2011Präzisionsbauteile durch Siebdruck hoch drei
Studnitzky, T.; Strauß, A.
Journal Article
2011Sintering of aluminium and magnesium alloy fiber structures
Studnitzky, T.; Andersen, O.; Morgenthal, I.; Stephani, G.; Kieback, B.
Conference Paper
2010Cellular metals based on wire structures
Studnitzky, T.; Kieselstein, E.; Hufenbach, W.; Weck, D.; Gottwald, R.; Stephani, G.; Kaina, S.
Conference Paper
2010Dreidimensionaler Siebdruck
Studnitzky, T.; Strauß, A.
Journal Article
2010Joining technologies and mechanical properties for a new kind of 3D wire structures
Kaina, S.; Kieback, B.; Hufenbach, W.; Gottwald, R.; Weck, D.; Kieselstein, E.; Studnitzky, T.; Stephani, G.
Conference Paper
2010Optimizing fuel cell parts by using 3D screen printed metals
Studnitzky, T.; Strauß, A.; Helm, P.; Wartmann, J.
Conference Paper
2010Suspensions- und Pastentechnologie zur Herstellung von PM-Werkstoffen und Bauteilen
Studnitzky, T.; Strauß, A.; Andersen, O.; Stephani, G.; Walther, G.; Quadbeck, P.; Trapp, J.; Kieback, B.
Conference Paper
2009Metallischer Siebdruck als Fertigungsverfahren für die Mikrosystemtechnik
Studnitzky, T.; Strauß, A.
Conference Paper
2008Allowing 3D metal structures with an accuracy of 100 micrometer by alternative 3D printing process
Studnitzky, T.; Strauß, A.
Conference Paper
2008Highly porous rigid fibre structures made from light metals
Andersen, O.; Morgenthal, I.; Studnitzky, T.
Conference Paper
2008Sintered metal fiber structures from aluminum based fibers-manufacturing and properties
Andersen, O.; Studnitzky, T.; Kostmann, C.; Stephani, G.
Conference Paper
2007Bauteil sowie seine Verwendung
Andersen, O.; Studnitzky, T.; Kostmann, C.
Patent
2007Inno.zellmet - a concerted approach towards the application of non-foam type cellular metals
Andersen, O.; Hungerbach, W.; Stephani, G.; Studnitzky, T.
Conference Paper
2006Direct typing as promising method for the production of cellular P/M parts
Studnitzky, T.; Andersen, O.
Conference Paper
2006Iron based cellular structures - Status and prospects
Stephani, G.; Andersen, O.; Göhler, H.; Kostmann, C.; Kümmel, K.; Quadbeck, P.; Reinfried, M.; Studnitzky, T.; Waag, U.
Conference Paper
2006Iron based cellular structures - status and prospects
Stephani, G.; Andersen, O.; Göhler, H.; Kostmann, C.; Kümmel, K.; Quadbeck, P.; Reinfried, M.; Studnitzky, T.; Waag, U.
Journal Article
2005Control of the carbon content in metal hollow sphere structures by variation of the debindering conditions
Studnitzky, T.; Andersen, O.
Conference Paper
2005Metallischer Siebdruck als Fertigungsverfahren für die Mikrosystemtechnik
Studnitzky, T.
Journal Article
2005Metallischer Siebdruck dreidimensionaler Mikrostrukturen
Studnitzky, T.
Journal Article
2004Direct typing - a new method for the production of cellular P/M parts
Andersen, O.; Studnitzky, T.; Bauer, J.
Conference Paper