Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Bias voltage effect on the mechanical properties, adhesion and milling performance of PVD films on cemented carbide inserts
Skordaris, G.; Bouzakis, K.-D.; Charalampous, P.; Kotsanis, T.; Bouzakis, E.; Bejjani, R.
Journal Article
2018Bias voltage optimum adjustment considering coatings' strength and adhesion requirements when cutting various steels
Skordaris, G.; Bouzakis, K.-D.; Kotsanis, T.; Charalampous, P.; Bouzakis, E.; Bejjani, R.
Journal Article
2018A critical review of FEM models to simulate the nano-impact test on PVD coatings
Skordaris, G.; Bouzakis, K.; Charalampous, P.
Conference Paper
2018Improving the cutting performance of coated tools via appropriate pre- and post-treatments
Bouzakis, K.; Skordaris, G.; Bouzakis, E.; Kotsanis, T.
Conference Paper
2016Adhesion of TiC and MoN physical vapor deposition coatings determined by innovative test methods directly on coated bearings
Bouzakis, K.-D.; Charalampous, P.; Skordaris, G.; Dimofte, F.; Ene, N.M.; Anderson, C.; Chavez, A.; Ekstrom, B.; Fetty, J.R.
Journal Article
2016Correlation between the wear behavior of coated cemented carbide tools and coatings properties assessed by nano-indentations, nanoand micro-impact tests
Bouzakis, Konstantinos-Dionysios; Charalampous, Panagiotis; Bouzakis, Emmanouil; Kotsanis, Tilemachos; Skordaris, Georios; Michailidis, Nikolaos; Klocke, Fritz; Bergs, Thomas; Ottersbach, Michael; Busch, Marc
Conference Paper
2015Effect of the interface fatigue strength of NCD coated hardmetal inserts on their cutting performance in milling
Bouzakis, K.D.; Skordaris, G.; Bouzakis, E.; Charalampous, P.; Kotsanis, T.; Tasoulas, D.; Kombogiannis, S.; Lemmer, O.
Journal Article
2015Explanation of the wear behaviour of NCD coated carbide tools facilitated by appropriate methods for assessing the coating adhesion deterioration at elevated temperatures
Bouzakis, K.-D.; Skordaris, G.; Bouzakis, E.; Tasoulas, D.; Charalampous, P.; Kotsanis, T.; Kombogiannis, S.; Lemmer, O.
Journal Article
2015Fatigue and adhesion characterization of DLC coatings on steel substrates by perpendicular and inclined impact tests
Bouzakis, K.-D.; Charalampous, P.; Skordaris, G.; Dimofte, F.; Ene, N.M.; Ehinger, R.; Gardner, S.; Modrzejewski, B.S.; Fetty, J.R.
Journal Article
2015Performance increase of hardmetal cutting tools based on stress-strain strain rate properties of their film
Bouzakis, K.D.; Charalampous, P.; Paraskevopoulou, R.; Skordaris, G.; Bouzakis, E.; Kombogiannis, S.; Katirtzoglou, G.; Makrimallakis, S.
Journal Article
2015Repetitive impact test near uncoated and coated cutting edges for assessing their fatigue behavior
Bouzakis, K.-D.; Batsiolas, M.; Skordaris, G.; Stergioudi, F.; Michailidis, N.
Journal Article
2014Brittleness and fatigue effect of mono- and multi-layer PVD films on the cutting performance of coated cemented carbide inserts
Skordaris, G.; Bouzakis, K.D.; Charalampous, P.; Bouzakis, E.; Paraskevopoulou, R.; Lemmer, O.; Bolz, S.
Journal Article
2014Effect of cutting edge preparation of coated tools on their performance in milling various materials
Bouzakis, K.D.; Bouzakis, E.; Kombogiannis, S.; Makrimallakis, S.; Skordaris, G.; Michailidis, N.; Charalampous, P.; Paraskevopoulou, R.; M'Saoubi, R.; Aurich, J.C.; Barthelmä, F.; Biermann, D.; Denkena, B.; Dimitrov, D.; Engin, S.; Karpuschewski, B.; Klocke, F.; Özel, T.; Poulachon, G.; Rech, J.; Schulze, V.; Settineri, L.; Srivastava, A.; Wegener, K.; Uhlmann, E.; Zeman, P.
Journal Article
2014Fatigue strength of diamond coating-substrate interface assessed by inclined impact tests at ambient and elevated temperatures
Bouzakis, E.; Bouzakis, K.D.; Skordaris, G.; Charalampous, P.; Kombogiannis, S.; Lemmer, O.
Journal Article
2014High performance up and down milling stainless steel considering coated tools' dynamic loads
Bouzakis, K.D.; Makrimallakis, S.; Skordaris, G.; Bouzakis, E.; Kombogiannis, S.; Katirtzoglou, G.; Maliaris, G.
Conference Paper
2013Coated tools' performance in up and down milling stainless steel, explained by film mechanical and fatigue properties
Bouzakis, K.D.; Makrimallakis, S.; Skordaris, G.; Bouzakis, E.; Kombogiannis, S.; Katirtzoglou, G.; Maliaris, G.
Journal Article
2013Coating's applications: Assessment of coatings' brittleness by nano-impact tests
Bouzakis, K.-D.; Skordaris, G.; Gerardis, S.; Bouzakis, E.
Conference Paper
2013Effect of silicon content on PVD film mechanical properties and cutting performance of coated cemented carbide inserts
Bouzakis, K.-D.; Bouzakis, E.; Kombogiannis, S.; Paraskevopoulou, R.; Skordaris, G.; Makrimallakis, S.; Katirtzoglou, G.; Pappa, M.; Gerardis, S.; M'Saoubi, R.; Andersson, J.M.
Journal Article, Conference Paper
2013Fatigue strength of diamond coatings' interface assessed by inclined impact test
Bouzakis, K.-D.; Skordaris, G.; Bouzakis, E.; Makrimallakis, S.; Kombogiannis, S.; Lemmer, O.
Journal Article, Conference Paper
2013Grain size effect of pre- and post-coating treated cemented carbides on PVD films' adhesion and mechanical properties
Bouzakis, K.-D.; Michailidis, N.; Skordaris, G.; Tsouknidas, A.; Makrimallakis, S.; Bouzakis, E.
Journal Article
2013Nano-impact test on micro-blasted coatings for assessing their brittleness
Bouzakis, K.D.; Skordaris, G.; Gerardis, S.; Bouzakis, E.
Conference Paper
2013Nano-impact test on PVD-coatings with graded mechanical properties for assessing their brittleness
Bouzakis, K.-D.; Skordaris, G.; Gerardis, S.; Bouzakis, E.
Journal Article
2012Coated tools' wear description in down and up milling based on the cutting edge entry impact duration
Bouzakis, K.-D.; Makrimallakis, S.; Katirtzoglou, G.; Bouzakis, E.; Skordaris, G.; Maliaris, G.; Gerardis, S.
Journal Article
2012Complete qualification methodology for coatings of precision glass molding tools
Klocke, F.; Georgiadis, K.; Dambon, O.; Bouzakis, K.D.; Gerardis, S.; Skordaris, G.
Journal Article
2012Cutting tools coating failure prediction based on innovative film characterisation methods
Bouzakis, K.-D.; Skordaris, G.; Maliaris, G.; Bouzakis, E.; Makrimallakis, S.; Katirtzoglou, G.; Gerardis, S.
Journal Article
2012Cutting with coated tools: Coating technologies, characterization methods and performance optimization
Bouzakis, K.-D.; Michailidis, N.; Skordaris, G.; Bouzakis, E.; Biermann, D.; M'Saoubi, R.
Journal Article
2012Determination of PVD coating mechanical properties by nanoindentations and impact tests at ambient and elevated temperatures
Bouzakis, K.-D.; Pappa, M.; Gerardis, S.; Skordaris, G.
Journal Article
2012PVD coatings' strength properties at various temperatures by nanoindentations and FEM calculations determined
Bouzakis, K.-D.; Pappa, M.; Gerardis, S.; Skordaris, G.; Bouzakis, E.
Journal Article
2011Adhesive interlayers' effect on the entire structure strength of glass molding tools' Pt-Ir coatings by nano-tests determined
Klocke, F.; Bouzakis, K.-D.; Georgiadis, K.; Gerardis, S.; Skordaris, G.; Pappa, M.
Journal Article
2011A complete qualification methodology for coatings of precision glass molding tools
Klocke, F.; Georgiadis, K.; Dambon, O.; Bouzakis, K.D.; Gerardis, S.; Skordaris, G.
Conference Paper
2011Effect of PVD films wet micro-blasting by various Al2O3 grain sizes on the wear behaviour of coated tools
Bouzakis, K.-D.; Bouzakis, E.; Skordaris, G.; Makrimallakis, S.; Tsouknidas, A.; Katirtzoglou, G.; Gerardis, S.
Journal Article
2011Influence of dry micro-blasting grain quality on wear behaviour of TiAlN coated tools
Bouzakis, K.-D.; Klocke, F.; Skordaris, G.; Bouzakis, E.; Gerardis, S.; Katirtzoglou, G.; Makrimallakis, S.
Journal Article
2011Methods for determining coating's strength properties changes after inducing plastic or elastic residual stresses
Bouzakis, K.-D.; Skordaris, G.; Bouzakis, E.
Journal Article, Conference Paper
2011Nano-impact test on a TiAlN PVD coating and correlation between experimental and FEM results
Bouzakis, K.-D.; Gerardis, S.; Skordaris, G.; Bouzakis, E.
Journal Article, Conference Paper
2011Optimization of wet micro-blasting on PVD films with various grain materials for improving the coated tools' cutting performance
Bouzakis, K.-D.; Skordaris, G.; Bouzakis, E.; Tsouknidas, A.; Makrimallakis, S.; Gerardis, S.; Katirtzoglou, G.
Journal Article
2011Optimization of wet or dry microblasting on PVD films by various Al2O3 grain sizes for improving the coated tools' cutting performance
Bouzakis, K.-D.; Tsouknidas, A.; Skordaris, G.; Bouzakis, E.; Makrimallakis, S.; Gerardis, S.; Katirtzoglou, G.
Journal Article
2010Adaption of graded Cr/CrN-interlayer thickness to cemented carbide substrates' roughness for improving the adhesion of HPPMS PVD films and the cutting performance
Bouzakis, K.-D.; Makrimallakis, S.; Katirtzoglou, G.; Skordaris, G.; Gerardis, S.; Bouzakis, E.; Leyendecker, T.; Bolz, S.; Koelker, W.
Journal Article, Conference Paper
2010Ambient and elevated temperature properties of TiN, TiAlN and TiSiN PVD films and their impact on the cutting performance of coated carbide tools
Bouzakis, K.-D.; Skordaris, G.; Gerardis, S.; Katirtzoglou, G.; Makrimallakis, S.; Pappa, M.; Lili, E.; M'Saoubi, R.
Journal Article
2010Chip length effect on the wear of coated cemented carbide inserts in milling
Bouzakis, K.-D.; Gerardis, S.; Katirtzoglou, G.; Makrimallakis, S.; Skordaris, G.; Efstathiou, K.
Conference Paper
2010Correlation between PVD coating strength properties and impact resistance at ambient and elevated temperatures
Bouzakis, K.D.; Pappa, M.; Skordaris, G.; Bouzakis, E.; Gerardis, S.
Journal Article, Conference Paper
2010Determination of the effective film mechanical properties in the impact test imprint of coated specimens
Bouzakis, K.-D.; Skordaris, G.; Bouzakis, E.; Lili, E.
Conference Paper
2010The effect of substrate pretreatments and HPPMS-deposited adhesive interlayers' materials on the cutting performance of coated cemented carbide inserts
Bouzakis, K.-D.; Skordaris, G.; Gerardis, S.; Katirtzoglou, G.; Makrimallakis, S.; Pappa, M.; Bolz, S.; Kölker, W.
Conference Paper, Journal Article
2010New methods for characterizing coating properties at ambient and elevated temperatures
Bouzakis, K.-D.; Batsiolas, M.; Malliaris, G.; Pappa, M.; Bouzakis, E.; Skordaris, G.
Conference Paper
2010Prediction of coating's properties after micro-blasting and their effect on the tool's cutting performance
Bouzakis, K.-D.; Klocke, F.; Skordaris, G.; Bouzakis, E.; Tsouknidas, A.; Gerardis, S.; Katirtzoglou, G.; Makrimallakis, S.
Conference Paper
2009Effect of dry micro-blasting on PVD-film properties, cutting edge geometry and tool life in milling
Bouzakis, K.-D.; Gerardis, S.; Skordaris, G.; Katirtzoglou, G.; Makrimallakis, S.; Klocke, F.; Bouzakis, E.
Journal Article
2009A FEM-based analytical-experimental method for determining strength properties gradation in coatings after micro-blasting
Bouzakis, K.-D.; Skordaris, G.; Klocke, F.; Bouzakis, E.
Journal Article
2007Determination of residual stress alterations, imposed by blasting on PVD films, by XRD and nanoindentations
Bouzakis, K.-D.; Pappa, M.; Skordaris, G.; Michailidis, N.; Klocke, F.; Bouzakis, E.
Conference Paper