Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2020Effects of process interruptions on the microstructure and tensile properties of AlSi10Mg parts manufactured by Laser-Based Powder Bed Fusion
Binder, M.; Leong, C.; Anstaett, C.; Schlick, G.; Seidel, C.; Reinhart, G.
Journal Article, Conference Paper
2020Influence of metal powder cross-contaminations on part quality in Laser Powder Bed Fusion: Copper alloy particles in maraging steel feedstock
Horn, M.; Langer, L.; Schafnitzel, M.; Dietrich, S.; Schlick, G.; Seidel, C.; Reinhart, G.
Journal Article, Conference Paper
2020Laser-based powder bed fusion of 16MnCr5 and resulting material properties
Schmitt, M.; Kamps, T.; Siglmüller, F.; Winkler, J.; Schlick, G.; Seidel, C.; Tobie, T.; Stahl, K.; Reinhart, G.
Journal Article
2020Multi-Material additive manufacturing - Recycling of binary metal powder mixtures by screening
Horn, M.; Prestel, L.; Schmitt, M.; Binder, M.; Schlick, G.; Seidel, C.; Reinhart, G.
Journal Article, Conference Paper
2020Procedure and validation of the implementation of automated sensor integration kinematics in an LPBF system
Binder, M.; Dirnhofer, C.; Kindermann, P.; Horn, M.; Schmitt, M.; Anstaett, C.; Schlick, G.; Seidel, C.; Reinhart, G.
Journal Article, Conference Paper
2019Additive manufacturing of pure tungsten by means of selective laser beam melting with substrate preheating temperatures up to 1000 °C
Müller, A.V.; Schlick, G.; Neu, R.; Anstätt, C.; Klimkait, T.; Lee, J.; Pascher, B.; Schmitt, M.; Seidel, C.
Journal Article
2019Continuing education and part-time training on additive manufacturing for people in employment - an approach focused on content-related and didactical excellence
Seidel, C.; Schätz, R.
Book Article
2018Automated manufacturing of mechatronic parts by laser-based powder bed fusion
Binder, M.; Anstaett, C.; Reisch, R.; Schlick, G.; Seidel, C.; Reinhart, G.
Journal Article, Conference Paper
2018Cost- and energy-efficient manufacture of gears by laser beam melting
Kamps, T.; Lutter-Guenther, M.; Seidel, C.; Gutowski, T.; Reinhart, G.
Journal Article
2018Design approach for additive manufacturing employing Constructal Theory for point-to-circle flows
Kamps, T.; Biedermann, M.; Seidel, C.; Reinhart, G.
Journal Article
2018Einfluss der Wärmebehandlung auf die Werkstoffeigenschaften laserstrahlerschmolzener Bauteile aus AlSi10Mg und X5CrNiCuNb16-4
Rowolt, Christian; Gebauer, Mathias; Seidel, Christian; Müller, Bernhard; Milkereit, Benjamin; Kessler, Olaf
Journal Article
2018Examination of the processability of 16MnCr5 by means of laser powder bed fusion
Schmitt, M.; Schlick, G.; Seidel, C.; Reinhart, G.
Journal Article, Conference Paper
2018In-situ-Analyse der Phasenumwandlungen in konventionellen und laserstrahlgeschmolzenen Legierungen AlSi10Mg und X5CrNiCuNb16-4
Rowolt, C.; Milkereit, B.; Gebauer, M.; Seidel, C.; Müller, B.; Kessler, O.
Journal Article
2018Multi-scale Modelling Approach for Contributing to Reduced Distortion in Parts Made by Laser-based Powder Bed Fusion
Seidel, C.; Zaeh, M.F.
Journal Article, Conference Paper
2018Potentials and challenges of multi-material processing by laser-based powder bed fusion
Binder, M.; Anstaett, C.; Horn, M.; Herzer, F.; Schlick, G.; Seidel, C.; Schilp, J.; Reinhart, G.
Conference Paper
2018Powder recycling in laser beam melting: strategies, consumption modeling and influence on resource efficiency
Lutter-Günther, M.; Gebbe, C.; Kamps, T.; Seidel, C.; Reinhart, G.
Journal Article
2018Powder separation strategies for recycling in multi-material additive manufacturing
Horn, M.; Prudzilko, P.; Anstaett, C.; Lutter-Guenther, M.; Seidel, C.; Reinhart, G.
Conference Paper
2018Spatter formation during laser beam melting of AlSi10Mg and effects on powder quality
Lutter-Günther, M.; Bröker, M.; Mayer, T.; Lizak, S.; Seidel, C.; Reinhart, G.
Journal Article, Conference Paper
2018Towards a flexible innovation process model assuring quality and customer needs
Louw, L.; Schutte, C.S.L.; Seidel, C.; Imser, C.
Journal Article
2017Fabrication of 3D multi-material parts using laser-based powder bed fusion
Anstaett, C.; Seidel, C.; Reinhart, G.
Conference Paper
2017Festphasenumwandlungen in konventionellem sowie laserstrahlgeschmolzenem AlSi10Mg und X5CrNiCuNb16-4
Rowolt, Christian; Gebauer, Mathias; Müller, Bernhard; Seidel, Christian; Milkereit, Benjamin; Kessler, Olaf
Journal Article, Conference Paper
2017Finden Sie die Vorteile für Ihr Unternehmen
Illgner, Matthias; Seidel, Christian
Journal Article
2017In-situ Untersuchung des Umwandlungsverhaltens bei der Wärmebehandlung des aushärtbaren Stahls X5CrNiCuNb16-4
Rowolt, Christian; Milkereit, Benjamin; Kessler, Olaf; Gebauer, Mathias; Kamps, Tobias; Seidel, Christian; Müller, Bernhard
Presentation
2017Laser-based powder bed fusion of 3D-multi-material-parts of copper-chrome-zirconia and tool steel
Anstaett, C.; Schafnitzel, M.; Seidel, C.; Reinhart, G.
Conference Paper
2017Laserstrahlgeschmolzene Bauteile - Wärmebehandlung optimiert Werkstoffeigenschaften
Rowolt, Christian; Milkereit, Benjamin; Kessler, Olaf; Kamps, Tobias; Seidel, Christian; Müller, Bernhard; Gebauer, Mathias
Conference Paper
2017Non-destructive quality testing of battery separators
Huber, J.; Tammer, C.; Schneider, D.; Seidel, C.; Reinhart, G.
Journal Article, Conference Paper
2017Transformation kinetics during heat treatment of additive manufactured alloys AlSi10Mg & X5CrNiCuNb16-4
Rowolt, Christian; Gebauer, Mathias; Kamps, Tobias; Seidel, Christian; Müller, Bernhard; Milkereit, Benjamin; Kessler, Olaf
Conference Paper
2016Method for classification of battery separator defects using optical inspection
Huber, J.; Tammer, C.; Krotil, S.; Waidmann, S.; Hao, X.; Seidel, C.; Reinhart, G.
Journal Article, Conference Paper
2016Qualität braucht wissen
Tammer, C.; Seidel, C.
Journal Article
2016Systematische Bauteilauslegung für die Additive Fertigung nach den Prinzipien der Bionik
Kamps, Tobias; Gralow, Melanie; Seidel, Christian; Reinhart, Gunther
Conference Paper
2015Additive Fertigung - Industrierelevante Anwendungen im Werkzeugbau und der Produktherstellung
Seidel, Christian; Müller, Bernhard; Riss, Fabian Karl Eberhard
Presentation
2015Additive Fertigung - Praxisrelevante Geschäftsmodelle und Anwendungsbeispiele
Seidel, Christian; Riss, Fabian Karl Eberhard; Kamps, Tobias; Lutter-Günther, Max
Presentation
2015Additive Fertigungsverfahren - Status Quo und Potenziale
Seidel, Christian
Presentation
2015Additive Fertigungsverfahren - Status Quo und Potenziale
Seidel, Christian
Presentation
2015Additive Fertigungsverfahren mit Praxisbeispielen
Seidel, Christian
Presentation
2015AMLab - Additive Manufacturing at TUM and Fraunhofer IWU
Seidel, Christian
Presentation
2015Bio TRIZ - Process know-how, design methodologies and software tools for enhanced additive manufacturing
Seidel, Christian; Kamps, Tobias; Riss, Fabian Karl Eberhard
Presentation
2015Bionik mittels 3-D-Druck - Was Konstrukteure von der Natur lernen können
Seidel, Christian
Presentation
2015Bionik mittels 3D-Druck - Was Konstrukteure in der Praxis von der Natur lernen können
Seidel, Christian
Presentation
2015Concept of the Green Factory Bavaria in Augsburg
Gebbe, Christian; Hilmer, Stephanie; Götz, Georg; Lutter-Günther, Max; Chen, Qian; Unterberger, Eric; Glasschröder, Johannes; Schmidt, Vanessa; Riss, Fabian Karl Eberhard; Kamps, Tobias; Tammer, Christoph; Seidel, Christian; Braunreuther, Stefan Rainer Johann; Reinhart, Gunther
Journal Article, Conference Paper
2015Economic and ecological evaluation of hybrid additive manufacturing technologies based on the combination of laser metal deposition and CNC machining
Lutter-Günther, Max; Wagner, Stephan; Seidel, Christian; Reinhart, Gunther
Conference Paper
2015Einführung in additive Fertigungsverfahren
Seidel, Christian
Presentation
2015Geschäftsmodelle für den Einsatz der additiven Fertigung in der industriellen Praxis
Lutter-Günther, Max; Seidel, Christian; Reinhart, Gunther; Baader, Andreas
Presentation
2015Implementation of additive manufacturing business models
Lutter-Günther, Max; Seidel, Christian; Kamps, Tobias; Reinhart, Gunther
Conference Paper
2015Modellbasierte Flexibilisierung der Biogasproduktion
Martens, Thilo; Wagenknecht, Martin; Seidel, Christian
Conference Paper
2015Multimaterialverarbeitung, Design-Rules und Software-Werkzeuge für die additive Produktentwicklung 2020
Anstätt, Christine; Seidel, Christian
Presentation
2015Optische Qualitätsprüfung von Batterieseparatoren
Huber, J.; Tammer, C.; Kempter, A.; Seidel, C.; Reinhart, G.
Journal Article
2015Pulverwerkstoffe - Die Ausgangsbasis für Qualitätsbauteile in der additiven Fertigung
Lutter-Günther, Max; Riss, Fabian Karl Eberhard; Seidel, Christian; Reinhart, Gunther
Presentation
2015Towards additive MANUFACTURING - potential along product lifecycle and global standardization activities
Seidel, Christian
Presentation
2015TRIZ-based biomimetic part-design for laser additive manufacturing
Kamps, Tobias; Münzberg, Christopher; Stacheder, Lucas; Seidel, Christian; Reinhart, Gunther; Lindemann, Udo
Presentation
2015Verluste vermeiden, Ressourcen schonen, Rohstoffe zurückgewinnen - Beispiel CFK-Recycling
Seidel, Christian
Presentation
2012Down-to-earth coatings: Carbon nanotube paints reduce lightning damage to aircraft
Seidel, Christian; Wulbrand, Wilhelm; Suppa, Manfred; Oehler, Harald; Alig, Ingo; Lellinger, Dirk
Journal Article
2012Ein Schild gegen Blitze
Seidel, Christian; Hebestreit, Andreas; Wulbrand, Wilhelm; Suppa, Manfred; Oehler, Harald
Journal Article
2010Advanced Galileo navigation system for asphalt fleet machines ASPHALT
Wasle, E.; Seybold, J.; Urquijo, S.; Rohmer, G.; Seidel, C.; Ligier, A.; Euler, H.-J.
Conference Paper