Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Additive manufactured WE43 magnesium: A comparative study of the microstructure and mechanical properties with those of powder extruded and as-cast WE43
Zumdick, N.A.; Jauer, L.; Kersting, L.C.; Kutz, T.N.; Schleifenbaum, J.H.; Zander, D.
Journal Article
2019Additive manufacturing of biodegradable metals: Current research status and future perspectives
Qin, Y.; Wen, P.; Guo, H.; Xia, D.; Zheng, Y.; Jauer, L.; Poprawe, R.; Voshage, M.; Schleifenbaum, J.H.
Journal Article
2019Additive manufacturing of biodegradable Zn-xWE43 porous scaffolds: Formation quality, microstructure and mechanical properties
Qin, Y.; Wen, P.; Voshage, M.; Chen, Y.; Schückler, P.G.; Jauer, L.; Xia, D.; Guo, H.; Zheng, Y.; Schleifenbaum, J.H.
Journal Article
2019Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffolds
Kopp, A.; Derra, T.; Müther, M.; Jauer, L.; Schleifenbaum, J.H.; Voshage, M.; Jung, O.; Smeets, R.; Kröger, N.
Journal Article
2019Numerical simulation in the absorption behavior of Ti6Al4V powder materials to laser energy during SLM
Zhang, D.; Wang, W.; Guo, Y.; Hu, S.; Dong, D.; Ziegler, S.; Schleifenbaum, J.H.
Journal Article
2019Porous structure design and fabrication of metal-bonded diamond grinding wheel based on selective laser melting (SLM)
Tian, C.; Li, X.; Zhang, S.; Guo, G.; Ziegler, S.; Schleifenbaum, J.H.; Wang, L.; Rong, Y.
Journal Article
2019Strongly Out-of-Equilibrium Columnar Solidification During Laser Powder-Bed Fusion in Additive Manufacturing
Boussinot, G.; Apel, M.; Zielinski, J.; Hecht, U.; Schleifenbaum, J.H.
Journal Article
2019Study of nickel-based super-alloys Inconel 718 and Inconel 625 in high-deposition-rate laser metal deposition
Zhong, C.; Kittel, J.; Gasser, A.; Schleifenbaum, J.H.
Journal Article
2018Additive manufacturing of honeycombs seal strips
Geisen, O.; Kersting, L.; Masseling, L.; Bogner, J.P.; Schleifenbaum, J.H.
Conference Paper
2018Additive manufacturing processes in fluid power - properties and opportunities demonstrated at a flow-optimized fitting
Matthiesen, G.; Merget, D.; Rückert, M.; Schmitz, K.; Schleifenbaum, J.H.
Conference Paper
2018Ageing response of an Al-Mg-Mn-Sc-Zr alloy processed by laser metal deposition in thin-wall structures
Zhao, T.; Cai, W.; Dahmen, M.; Schaible, J.; Hong, C.; Gasser, Andres; Weisheit, Andreas; Biermann, T.; Kelbassa, I.; Zhang, H.; Gu, D.; Schleifenbaum, J.H.
Journal Article
2018Automatable support removal and surface smoothing of additive manufactured parts made of AlSi10Mg
Schmithüsen, T.; Bremen, S.; Schleifenbaum, J.H.
Conference Paper
2018Characterization of additively manufactured metal flexure hinges
Kimm, M.; Schueckler, P.; Schoenen, D.; Corves, B.; Schleifenbaum, J.H.
Conference Paper
2018Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants
Wen, P.; Jauer, L.; Voshage, M.; Chen, Y.; Poprawe, R.; Schleifenbaum, J.H.
Journal Article
2018Depositing laser-generated nanoparticles on powders for additive manufacturing of oxide dispersed strengthened alloy parts via laser metal deposition
Streubel, R.; Wilms, M.B.; Doñate-Buendía, C.; Weisheit, A.; Barcikowski, S.; Schleifenbaum, J.H.; Gökce, B.
Journal Article
2018Design of high-manganese steels for additive manufacturing applications with energy-absorption functionality
Kies, F.; Köhnen, P.; Wilms, M.B.; Brasche, F.; Pradeep, K.G.; Schwedt, A.; Richter, S.; Weisheit, A.; Schleifenbaum, J.H.; Haase, C.
Journal Article
2018Development of adapted Ni-738 powder for additive manufacturing
Vogelpoth, A.; Sharma, S.; Schleifenbaum, J.H.
Conference Paper
2018Digital photonic production along the lines of industry 4.0
Poprawe, R.; Hinke, C.; Meiners, W.; Eibl, F.; Zarei, O.; Voshage, M.; Ziegler, S.; Schleifenbaum, J.H.; Gasser, A.; Schopphoven, T.; Willenborg, E.; Flemmer, J.; Weingarten, C.; Finger, J.; Reininghaus, M.
Conference Paper
2018Efficient numerical modeling of 3D-printed lattice-cell structures using neural networks
Koeppe, A.; Hernandez Padilla, C.A.; Voshage, M.; Schleifenbaum, J.H.; Markert, B.
Journal Article
2018Feasibility investigation for laser powder bed fusion of high-speed steels
Saewe, J.; Gayer, C.; Jauer, L.; Kunz, J.; Broeckmann, C.; Schleifenbaum, J.H.
Conference Paper
2018Influence of powder bed temperature on microstructure and post heat treatment of high speed steel AISI M50 processed by laser-powder bed fusion
Kunz, J.; Herzog, S.; Kaletsch, A.; Broeckmann, C.; Saewe, J.; Gayer, C.; Schleifenbaum, J.H.
Conference Paper
2018Influence of solution heat treatment on microstructure and tensile properties of Inconel 718 formed by high-deposition-rate laser metal deposition
Sui, S.; Zhong, C.; Chen, J.; Gasser, A.; Huang, W.; Schleifenbaum, J.H.
Journal Article
2018Influence of the material properties of a poly(D,L-lactide)/β-tricalcium phosphate composite on the processability by selective laser sintering
Gayer, C.; Abert, C.; Bullemer, M.; Grom, S.; Jauer, L.; Meiners, W.; Reinauer, F.; Vučak, M.; Wissenbach, K.; Poprawe, R.; Schleifenbaum, J.H.; Fischer, H.
Journal Article
2018Laser additive manufacturing of oxide dispersion strengthened steels using laser-generated nanoparticle-metal composite powders
Wilms, M.B.; Streubel, R.; Frömel, F.; Weisheit, A.; Tenkamp, J.; Walther, F.; Barcikowski, S.; Schleifenbaum, J.H.; Gökce, B.
Journal Article, Conference Paper
2018Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties
Wen, P.; Voshage, M.; Jauer, L.; Chen, Y.; Qin, Y.; Poprawe, R.; Schleifenbaum, J.H.
Journal Article
2018Local laser softening of press-hardened steel at high feed rates
Vogt, S.; Bechheim, L.; Banik, J.; Flaischerowitz, M.; Weisheit, A.; Schleifenbaum, J.H.
Journal Article
2018Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel
Köhnen, P.; Haase, C.; Bültmann, J.; Ziegler, S.; Schleifenbaum, J.H.; Bleck, W.
Journal Article
2018Mechanical properties of sheet metal components with local reinforcement produced by additive manufacturing
Ünsal, I.; Hama-Saleh, R.; Sviridov, A.; Bambach, M.; Weisheit, A.; Schleifenbaum, J.H.
Conference Paper
2018Microstructures, tensile properties, and fracture mechanisms of Inconel 718 formed by HDR-LMD with PREP and GA powders
Zhong, C.; Chen, J.; Gasser, A.; Sui, S.; Schleifenbaum, J.H.
Journal Article
2018Multi-physical analysis of thermo-optical effects for different Selective Laser Melting (SLM) scanning strategies
Bonhoff, T.; Poppe, M.; Stollenwerk, J.; Schleifenbaum, J.H.; Loosen, P.
Journal Article, Conference Paper
2018On the correlation of the shielding gas flow in L-PBF machines with part density
Schniedenharn, M.; Schleifenbaum, J.H.
Conference Paper
2018Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites
Doñate-Buendía, C.; Frömel, F.; Wilms, M.B.; Streubel, R.; Tenkamp, J.; Hupfeld, T.; Nachev, M.; Gökce, E.; Weisheit, A.; Barcikowski, S.; Walther, F.; Schleifenbaum, J.H.; Gökce, B.
Journal Article
2018Position-dependent part quality of the L-PBF process resulting from the laser's angle of incidence
Schniedenharn, M.; Schleifenbaum, J.H.
Conference Paper
2018Visualization of the shielding gas flow in SLM machines by space-resolved thermal anemometry
Schniedenharn, M.; Wiedemann, F.; Schleifenbaum, J.H.
Journal Article
2018Zweistufiges Laserstrahlbeschichten für Funktions- und Verschleißschutzschichten
Maischner, D.; Ross, I.; Weisheit, A.; Deschuyteneer, D.; Petit, F.; Schleifenbaum, J.H.
Journal Article
2017Additive manufacturing of magnesium alloys
Jauer, L.; Kimm, M.; Meiners, W.; Santos Batista, R.J.; Labude, N.; Bienert, M.; Neuß, S.; Lethaus, B.; Münther, M.; Kopp, A.; Ptock, C.; Schleifenbaum, J.H.
Abstract
2017Alternative beam sources and machine concepts for laser powder bed fusion
Eibl, F.; Tenbrock, C.; Pichler, T.; Schmithüsen, T.; Heussen, D.; Schleifenbaum, J.H.
Conference Paper
2017Case studies on local reinforcement of sheet metal components by laser additive manufacturing
Bambach, M.; Sviridov, A.; Weisheit, A.; Schleifenbaum, J.H.
Journal Article
2017Design of flexible implants for preservation of physiological mobility exploiting additive manufacturing
Kimm, M.; Jauer, L.; Hinke, C.; Schleifenbaum, J.H.; Poprawe, R.
Conference Paper
2017The influence of the powder stream on high-deposition-rate laser metal deposition with Inconel 718
Zhong, C.; Pirch, N.; Gasser, A.; Poprawe, R.; Schleifenbaum, J.H.
Journal Article
2017Laser polishing and 2PP structuring of inside microfluidic channels in fused silica
Weingarten, C.; Steenhusen, S.; Hermans, M.; Willenborg, E.; Schleifenbaum, J.H.
Journal Article
2017Microstructure and degradation of WE43 bone scaffolds fabricated by selective laser melting
Berger, L.; Jauer, Ö.; Bär, F.; Faude, E.; Schäublin, R.; Schleifenbaum, J.H.; Löffler, J.F.
Abstract
2017Numerical and experimental study of Ti6Al4V components manufactured using powder bed fusion additive manufacturing
Zielinski, J.; Mindt, H.-W.; Düchting, J.; Schleifenbaum, J.H.; Megahed, M.
Journal Article
2017Post-processing and plasma electrolytic oxidation coating of additive manufactured magnesium scafolds
Müther, M.; Kopp, A.; Ptock, C.; Jauer, L.; Labude, N.; Bienert, M.; Neuß-Stein, S.; Lethaus, B.; Schleifenbaum, J.H.
Abstract
2010High power selective laser melting (HP SLM) - Upscaling the productivity of additive metal manufacturing towards factor 10
Schleifenbaum, J.H.; Theis, J.; Meiners, W.; Wissenbach, K.; Diatlov, A.; Bültmann, J.; Voswinckel, H.
Conference Paper
2010How can Reynolds help to improve the performance of production systems?
Schleifenbaum, J.H.; Uam, J.-Y.; Schuh, G.; Hinke, C.
Conference Paper