Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Modeling of spontaneous transformation of nitrides to Z phase accounting for stress relaxation by diffusion and interface activity
Svoboda, J.; Riedel, H.
Journal Article
2018Verformung, Schädigung und Mikrostrukturentwicklung der Legierung Alloy 800H unter Ermüdungsbeanspruchung bei hohen Temperaturen
Hübsch, Oliver
: Riedel, Hermann; Heilmaier, Martin
Dissertation
2017Characterization of physico-mechanical properties of Z-phase strengthened ferritic steels using internal friction measurements in the range 25 ÷ 750˚C
Kutelia, E.; Dzigrashvili, T.; Kukava, G.; Darsavelidze, I.; Kurashvili, I.; Riedel, H.; Donth, B.
Conference Paper
2017Study of inelastic/elastic properties and shear modulus of Z-phase strengthened ferritic steels in the range 25 - 750 ° C
Kutelia, E.; Dzigrashvili, T.; Kukava, T.; Darsavelidze, G.; Kurashvili, I.; Riedel, H.; Donth, B.
Book Article
2017Vorhersage der Kantenrissbildung beim Warmbandwalzen schwer umformbarer Nickelbasislegierungen
Maas, Peter
: Riedel, H.; Schulze, V.
Dissertation
2016Mikrostruktur- und mechanismusbasierte Werkstoffmodelle zur Beschreibung des Deformations- und Lebensdauerverhaltens von thermomechanisch beanspruchten Graugusswerkstoffen
Metzger, Mario
: Riedel, H.; Böhlke, T.; Seifert, T.
Dissertation
2016Mikrostruktursimulationen zur Ermittlung von Materialeigenschaften für Blechwerkstoffe und Anwendung in der Umformsimulation
Baiker, Maria
: Riedel, H.; Böhlke, T.; Liewald, M.
Dissertation
2016A model for strain hardening, recovery, recrystallization and grain growth with applications to forming processes of nickel base alloys
Riedel, H.; Svoboda, J.
Journal Article
2016Precipitate growth in multi-component systems with stress relaxation by diffusion and creep
Svoboda, J.; Fischer, F.D.; Riedel, H.; Kozeschnik, E.
Journal Article
2016Z phase strengthened steels for ultra-supercritical power plants
Riedel, H.
Report
2015Bewertung der Restlebensdauer kritischer Komponenten von Bestandskraftwerken bei flexibler Fahrweise
Maier, G.; Hübsch, O.; Oesterlin, H.; Riedel, H.; Lüdenbach, G.; Mohrmann, R.
Conference Paper
2015Untersuchungen zur Kriechermüdungswechselwirkung in der hochwarmfesten Legierung Alloy 800H
Hübsch, O.; Maier, G.; Riedel, H.; Klöwer, J.; Maas, P.
Conference Paper
2014Cyclic plasticity and lifetime of the nickel-based alloy C-263: Experiments, models and component simulation
Maier, G.; Hübsch, O.; Riedel, H.; Somsen, C.; Klöwer, J.; Mohrmann, R.
Conference Paper
2014Disassembly analysis of slates: Design for repair and recycling evaluation. Final report
Schischke, Karsten; Stobbe, Lutz; Dimitrova, Gergana; Scheiber, Sascha; Oerter, Markus; Nowak, Torsten; Schlösser, Alexander; Riedel, Hannes; Nissen, Nils F.
Report
2014Einfluss der Mikrostruktur der Legierung Alloy 800H auf die viskoplastische Verformung unter Ermüdungsbeanspruchung
Hübsch, O.; Maier, G.; Riedel, H.; Somsen ,C.; Klöwer, J.
Conference Paper
2014Lifetime prediction of EN-GJV 450 cast iron cylinder heads under combined thermo-mechanical and high cycle fatigue loading
Metzger, Mario; Leidenfrost, M.; Werner, E.; Riedel, H.; Seifert, T.
Journal Article
2014Methoden zur Lebensdauerbewertung von Kraftwerkskomponenten unter flexibler Betriebsweise
Schmitt, P.; Schwienheer, M.; Oechnser, M.; Oesterlin, H.; Riedel, H.; Maier, G.; Mohrmann, R.
Conference Paper
2013Cyclic deformation and lifetime of alloy 617B during isothermal low cycle fatigue
Maier, G.; Riedel, H.; Somsen, C.
Journal Article
2013Cyclic deformation and lifetime of alloy 617B during thermo-mechanical fatigue
Maier, G.; Riedel, H.; Nieweg, B.; Somsen, C.; Eggeler, G.; Klöwer, J.; Mohrmann, R.
Journal Article
2013Disassembly analysis of slates: Design for repair and recycling evaluation. Final report
Schischke, Karsten; Stobbe, Lutz; Scheiber, Sascha; Oerter, Markus; Nowak, Torsten; Schlösser, Alexander; Riedel, Hannes; Nissen, Nils F.
Report
2013Discrete element method sintering simulation
Wonisch, A.; Rasp, T.; Kraft, T.; Riedel, H.
Book Article
2013Discrete element study on the influence of initial coordination numbers on sintering behaviour
Rasp, T.; Kraft, T.; Riedel, H.
Journal Article
2013Investigation on crack propagation behaviour in welded waterwall tubes
Siegele, D.; Varfolomeev, I.; Moroz, S.; Schlesinger, M.; Riedel, H.; Hettkamp, D.; Jost, A.-R.
Conference Paper
2013Numerical simulation of organic binder decomposition during thermal debinding
Kraft, T.; Schmidt, I.; Riedel, H.; Svoboda, J.; Kestler, H.; Wagner, J.
Conference Paper
2012Numerical simulation of organic binder decomposition and combined seepage- and diffusive transport of the gaseous reaction products through a porous green body during thermal debinding of ceramic parts
Schmidt, I.; Riedel, H.; Svoboda, J.
Conference Paper, Journal Article
2011Diffusion kinetics in aluminium-gold bond contacts from first-principles density functional calculations
Ulrich, C.M.; Hashibon, A.; Svoboda, J.; Elsässer, C.; Helm, D.; Riedel, H.
Journal Article
2011Time and temperature dependent cyclic plasticity and fatigue crack growth of the nickel-base Alloy617B
Maier, G.; Riedel, H.; Seifert, T.; Klöwer, J.; Mohrmann, R.
Conference Paper
2010A comfortable world without standby - the zero Watt inside (ZeWIn) system
Deubzer, O.; Nissen, N.F.; Riedel, H.; Gaugele, J.; Ulmer, D.
Abstract
2010LCF- und TMF-Versuche mit kraftwerkstypisch niedrigen Belastungsraten zur Charakterisierung von Nickelbasislegierungen
Schlesinger, M.; Seifert, T.; Möser, M.; Riedel, H.
Conference Paper
2010Mechanism-based thermomechanical fatigue life prediction of cast iron. Part I: Models
Seifert, T.; Riedel, H.
Journal Article
2010Mechanism-based thermomechanical fatigue life prediction of cast iron. Part II: Comparison of model predictions with experiments
Seifert, T.; Maier, G.; Uihlein, A.; Lang, K.H.; Riedel, H.
Journal Article
2010Mechanisms and modelling of fatigue crack growth under combined low and high cycle fatigue loading
Schweizer, C.; Seifert, T.; Nieweg, B.; Hartrott, P. von; Riedel, H.
Journal Article
2010Reduction of tensile residual stresses during the drawing process of tungsten wires
Ripoll, M.R.; Weygand, S.M.; Riedel, H.
Journal Article
2010Simulation of fatigue crack growth under large scale yielding conditions
Schweizer, C.; Seifert, T.; Riedel, H.
Conference Paper
2010Simulation von pulvermetallurgischen Formgebungsverfahren
Kraft, T.; Schmidt, I.; Riedel, H.
Conference Paper
2010Verbesserte Methoden zur Lebensdauerberechnung von Abgasturbolader-Radialverdichterräder aus hochwarmfesten Aluminiumlegierungen
Khalil, O.; Schweizer, C.; Hartrott, P. von; Lang, K.-H.; Riedel, H.; Seifert, T.
Conference Paper
2009Effect of different particle size distributions on solid-state sintering
Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.
Journal Article
2009Electrophysiological and psychophysical asymmetries in sensitivity to interaural correlation steps
Lüddemann, H.; Riedel, H.; Kollmeier, B.
Journal Article
2009Fatigue life prediction of high temperature components in combustion engines and exhaust systems
Seifert, T.; Riedel, H.
Conference Paper
2009Die filling optimization using three-dimensional discrete element modeling
Bierwisch, C.; Kraft, T.; Riedel, H.; Moseler, M.
Journal Article
2009Modeling the evolution of texture and grain shape in Mg alloy AZ31 using the crystal plasticity finite element method
Prakash, A.; Weygand, S.M.; Riedel, H.
Conference Paper, Journal Article
2009Modellierung des Verformungs- und Versagensverhaltens von Punktschweißverbindungen unter monoton ansteigender Belastung
Sommer, Silke
: Gumbsch, P.; Riedel, H.
Dissertation
2009Texture induced tension-compression asymmetry of drawn tungsten wires
Ripoll, M.R.; Reisacher, E.; Riedel, H.
Conference Paper, Journal Article
2009Thermomechanical fatigue life prediction of high temperature components
Seifert, T.; Hartrott, P. von; Riedel, H.; Siegele, D.
Conference Paper
2009Three-dimensional discrete element models for the granular statics and dynamics of powders
Moseler, M.; Bierwisch, C.; Kraft, T.; Riedel, H.
Conference Paper
2009Three-dimensional discrete element models for the granular statics and dynamics of powders in cavity filling
Bierwisch, C.; Kraft, T.; Riedel, H.; Moseler, M.
Journal Article
2009Verfahren und Vorrichtung zur Homogenisierung einer Pulverschuettung bei der Herstellung von Pulverpresslingen
Bierwisch, C.; Moseler, M.; Kraft, T.; Riedel, H.
Patent
2008Discrete element simulations of constrained ceramic powder sintering
Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.
Journal Article
2008Finite element modelling of PM surface densification process
Yazici, B.A.; Kraft, T.; Riedel, H.
Journal Article
2008Numerical homogenisation of elasto-plastic granule assemblies using discretised particles
Schmidt, I.; Kraft, T.; Riedel, H.
Conference Paper
2008Rechnerische Methoden zur Lebensdauervorhersage von gegossenen Hochtemperaturbauteilen
Seifert, T.; Riedel, H.
Conference Paper
2008Simulation der Herstellungsprozesse für Hartstoffe
Riedel, H.; Bierwisch, C.; Kraft, T.
Conference Paper
2008Simulation of die filling in 3D with special emphasis on vibration supported filling
Bierwisch, C.; Kraft, T.; Moseler, M.; Riedel, H.
Conference Paper
2008Twinning models in self-consistent texture simulations of TWIP steels
Prakash, A.; Hochrainer, T.; Reisacher, E.; Riedel, H.
Conference Paper, Journal Article
2008Ziehstein zur Querschnittsreduzierung von Draehten
Rodriguez Ripoll, M.; Riedel, H.
Patent
2007Discrete element modeling of anisotropy development during constrained sintering of alumina
Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.
Conference Paper
2007Experimental and numerical investigation of texture development during hot rolling of magnesium alloy AZ31
Schmidt, C.; Kawalla, R.; Walde, T.; Riedel, H.; Prakash, A.; Poizat, C.
Conference Paper
2007Experimental and numerical investigation of texture development during hot rolling of magnesium alloys
Kawalla, R.; Schmidt, C.; Riedel, H.; Prakash, A.
Conference Paper
2007Fokalflaeche und Detektor fuer optoelektronische Bildaufnahmesysteme, Herstellungsverfahren und optoelektronisches Bildaufnahmesystem
Ansorge, F.; Craubner, S.; Feil, M.; Platz, W.; Riedel, H.
Patent
2007The formation of edge cracks during rolling of metal sheet
Riedel, H.; Andrieux, F.; Walde, T.; Karhausen, K.-F.
Journal Article
2007Korrelation zwischen zyklischer Rissspitzenöffnung und Lebensdauer
Schweizer, C.; Seifert, T.; Schlesinger, M.; Riedel, H.
Conference Paper
2007Lifetime models for high temperature components
Seifert, T.; Riedel, H.; Pramhas, G.; Bumberger, G.
Journal Article
2007Modeling texture evolution during hot rolling of magnesium alloy AZ31
Walde, T.; Riedel, H.
Journal Article
2007Multi-grain finite element model for studying the wire drawing process
Ocenasek, J.; Rodriguez Ripoll, M.; Weygand, S.M.; Riedel, H.
Conference Paper, Journal Article
2007Simulation of earing during deep drawing of magnesium alloy AZ31
Walde, T.; Riedel, H.
Journal Article
2007Simulations of the influence of rearrangement during sintering
Henrich, B.; Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.
Journal Article
2007Stress-induced anisotropy of sintering alumina: Discrete element modelling and experiments
Wonisch, A.; Guillon, O.; Kraft, T.; Moseler, M.; Riedel, H.; Rödel, J.
Journal Article
2007Twinning models in self-consistent simulations of TWIP steels
Prakash, A.; Hochrainer, T.; Riedel, H.; Helm, D.; Reisacher, E.
Conference Paper
2007Werkstoffmodellierung und Simulation
Riedel, H.; Gumbsch, P.
Book Article
2006Anisotropic liquid phase sintering investigated by means of micromechanical and discrete element modeling
Wonisch, A.; Korn, K.; Kraft, T.; Riedel, H.
Conference Paper
2006Experimental and numerical investigation of texture development during hot rolling of magnesium alloys
Kawalla, R.; Schmidt, C.; Riedel, H.; Prakash, A.
Conference Paper
2006Finite-element implementation of a self-consistent texture model with a hardening law based on dislocation densities
Walde, T.; Gumbsch, P.; Riedel, H.
Journal Article
2006Material characterisation for reliable and efficient springback prediction in sheet metal forming
Krasowsky, A.; Schmitt, W.; Riedel, H.
Journal Article
2006Multi-scale simulations of rearrangement effects and anisotropic behavior during sintering
Wonisch, A.; Kraft, T.; Riedel, H.
Conference Paper
2006Numerical simulation of the drawing process of tungsten wires
Weygand, S.M.; Riedel, H.; Eberhard, B.; Wouters, G.
Conference Paper, Journal Article
2006Optimierung von Sinterverzügen durch Computersimulation
Kraft, T.; Riedel, H.
Book Article
2006Particle methods in powder technology
Henrich, B.; Moseler, M.; Riedel, H.
Conference Paper
2006Simulation of microwave sintering with advanced sintering models
Riedel, H.; Svoboda, J.
Conference Paper
2006Simulation von Prozessfolgen mit der Diskrete-Elemente-Methode
Riedel, H.; Wonisch, A.; Bierwisch, C.; Kraft, T.; Moseler, M.
Conference Paper
2006Thermo-mechanical material models for components of engines and power plants
Seifert, T.; Mohrmann, R.; Hartrott, P. von; Tandler, M.; Riedel, H.
Conference Paper
20053D-modeling of die filling
Bierwisch, C.; Henrich, B.; Kraft, T.; Moseler, M.; Riedel, H.
Conference Paper
2005Application of a microstructure-based model for sintering and creep
Reiterer, M.; Kraft, T.; Riedel, H.
Conference Paper
2005Computation of macroscopic yield surfaces by particle methods
Schmidt, I.; Wonisch, A.; Henrich, B.; Moseler, M.; Riedel, H.
Conference Paper
2005Computer simulation as a tool in PM material science and technology
Kraft, T.; Riedel, H.; Gumbsch, P.
Conference Paper
2005Interactive texture- and finite-element simulation including the Bauschinger effect
Walde, T.; Riedel, H.
Conference Paper, Journal Article
2005Modeling texture evolution during rolling of magnesium alloy AZ31
Walde, T.; Riedel, H.
Conference Paper, Journal Article
2005Modelling and simulation of processing steps in powder technology using particle dynamics
Kraft, T.; Henrich, B.; Bierwisch, C.; Moseler, M.; Riedel, H.
Conference Paper
2005Modelling of anisotropic shrinkage during liquid phase sintering
Korn, K.; Kraft, T.; Riedel, H.
Conference Paper
2005Multi-scale modeling and simulation of sintering
Kraft, T.; Henrich, B.; Moseler, M.; Riedel, H.
Conference Paper
2005Numerical simulation of the drawing process of tungsten wires
Weygand, S.M.; Riedel, H.; Eberhard, B.; Wouters, G.
Conference Paper
2005Simulation von Rissbildung und Verzug in der Mikroelektronik
Kraft, T.; Riedel, H.; Schwanke, D.; Müller, E.
Journal Article
2005Understanding of the phase transformation from fullerite to amorphous carbon at the microscopic level
Moseler, M.; Riedel, H.; Gumbsch, P.; Stäring, J.; Mehlig, B.
Journal Article
2005Verbesserte konstitutive Modelle zur Beschreibung von Umformprozessen - Numerische Implementierung, Experimente und Anwendungen
Riedel, H.; Andrieux, F.; Sun, D.-Z.; Walde, T.
Book Article
2004Assessment of fatigue lifetime of PM-parts
Kraft, T.; Riedel, H.
Conference Paper
2004Development and application of a micromechanical model for description of the growth and coalescence of spheroidal voids
Andrieux, F.; Sun, D.-Z.; Riedel, H.
Conference Paper
2004Finite element simulation of cold isostatic pressing and sintering of SiC components
Reiterer, M.; Kraft, T.; Janosovits, U.; Riedel, H.
Journal Article
2004Manufacturing of a gear wheel made from reaction bonded alumina - numerical simulation of the sinterforming process
Reiterer, M.; Kraft, T.; Riedel, H.
Conference Paper, Journal Article
2004Modelling and numerical simulation of powder die compaction with a particle code
Coube, O.; Henrich, B.; Moseler, M.; Riedel, H.
Conference Paper
2004Numerical simulation of the double-step pressing of a simplified gear
Coube, O.; Andrieux, F.; Riedel, H.
Conference Paper
2004Simulation in powder technology
Riedel, H.; Kraft, T.
Book Article
2004Sintern
Riedel, H.
Journal Article
2004Springback simulation in sheet metal forming using material formulation based on combined isotropic-kinematic hardening with elasto-plastic anisotropy
Krasowsky, A.; Walde, T.; Schmitt, W.; Andrieux, F.; Riedel, H.
Conference Paper
2003Compaction and sintering of a ceramic seal: Modeling and experimental response
Kraft, T.; Riedel, H.; Rosenfelder, O.
Journal Article
2003Interactive texture- and finite-element simulation for modelling of complex deformation processes for hcp-metals
Walde, T.; Riedel, H.
Journal Article, Conference Paper
2003Lebensdauerberechnung von Abgaskomponenten auf der Basis von Riss-wachstumsmodellen für thermomechanische Ermüdung
Riedel, H.; Mohrmann, R.; Schmitt, W.; Hauss, R.
Conference Paper
2003Numerical simulation of the fatigue lifetime of a powder metallurgical gear based on the green density distribution
Kraft, T.; Riedel, H.
Conference Paper
2003Numerical-simulation of the fatigue lifetime of a powder metallurgical gear based on the green density distribution
Kraft, T.; Riedel, H.
Journal Article
2003Prediction of fatigue lifetime of PM-parts
Kraft, T.; Riedel, H.
Conference Paper
2003Processing techniques for functionally graded materials
Kieback, B.; Neubrand, A.; Riedel, H.
Journal Article
2003Spring-back simulation based on characterization of sheet metals under reverse plastic strains
Krasowsky, A.; Riedel, H.; Schmitt, W.; Benevolenski, O.
Conference Paper
2003Springback simulation in metal sheet forming
Krasowsky, A.; Schmitt, W.; Andrieux, F.; Haas, E.; Riedel, H.
Conference Paper
2002Computational shape optimization of a cutting tool
Kraft, T.; Riedel, H.
Conference Paper
2002Identification of process parameters for sinter forming of RBAO by using numerical simulations
Reiterer, M.; Kraft, T.; Riedel, H.
Conference Paper
2002Micromechanism based macrostructural finite element analysis of the powder metallurgical process of refractory metals
Plankensteiner, A.F.; Kraft, T.; Riedel, H.
Conference Paper
2002Modelling of the fatigue life of automobile exhaust components
Schmitt, W.; Mohrmann, R.; Riedel, H.; Dietsche, A.; Fischersworring-Bunk, A.
Conference Paper
2002Modelling of the sinter forging process of reaction bonded alumina
Reiterer, M.; Kraft, T.; Kauermann, R.; Riedel, H.
Conference Paper
2002Numerical simulation of die compaction and sintering
Kraft, T.; Riedel, H.
Journal Article
2002Simulation des Brennprozesses bei der Herstellung von Gebrauchskeramiken
Kraft, T.; Riedel, H.; Raether, F.; Becker, F.
Journal Article
2002Simulation of hot forming processes of refractory metals using porous metal plasticity models
Parteder, E.; Riedel, H.; Sun, D.Z.
Journal Article
2001Belastungen der Werkzeuge beim Pulverpressen
Kraft, T.; Riedel, H.; Rosenfelder, O.
Book Article
2001A comprehensive model for solid state sintering and its application to silicon-carbide
Riedel, H.; Blug, B.
Book Article
2001Creep crack growth
Riedel, H.
Book Article
2001Density evolution in a powder compact and stresses in the tools during uniaxial die compaction
Kraft, T.; Riedel, H.
Conference Paper
2001Numerical simulation of pressing and sintering in the ceramic and hard metal industry
Kraft, T.; Coube, O.; Riedel, H.
Conference Paper
2001Numerische Simulation des Pressens und Sintern mit ABAQUS
Kraft, T.; Coube, O.; Riedel, H.
Conference Paper
2001Simulation of hot forming processes of sintered refractory metals using porous metal plasticity models
Parteder, E.; Andrieux, F.; Riedel, H.; Sun, D.-Z.
Conference Paper
2001Simulation of hot forming processes using porous metal plasticity models
Parteder, E.; Riedel, H.; Sun, D.-Z.
Conference Paper
2001Stresses in the tools and density evolution in a powder compact during uniaxial die compaction
Kraft, T.; Riedel, H.; Rosenfelder, O.; Wittig, F.
Conference Paper
2000Computational optimization of parts produced from ceramic powders
Kraft, T.; Riedel, H.; Rosenfelder, O.; Stingl, P.
Conference Paper
2000Finite element simulation of die pressing and sintering
Kraft, T.; Coube, O.; Riedel, H.
Conference Paper
2000Numerical simulation of metal powder die compaction with special consideration of cracking
Coube, O.; Riedel, H.
Journal Article
2000Simulation and investigation of pore size graded titania layers during sintering
Moritz, T.; Riedel, H.; Werner, G.; Tomandl, G.
Journal Article
1999Densification of sintered molybdenum during hot upsetting: experiments and modelling
Parteder, E.; Riedel, H.; Kopp, R.
Journal Article
1999Distortions and cracking of graded components during sintering
Riedel, H.; Kraft, T.
Conference Paper
1999Finite element simulation of die pressing and sintering
Kraft, T.; Riedel, H.; Stingl, P.; Wittig, F.
Journal Article
1999Formgenaue, rißfreie und kostengünstige Bauteile aus Keramik - Numerische Simulation des Pressens und Sinterns
Riedel, H.; Kraft, T.; Stingl, P.; Greim, J.
Conference Paper
1999Modellierung von Verdichtung und Rißbildung beim Trockenpressen von Metallpulvern
Coube, O.; Riedel, H.; Fax, D.; Ernst, E.; Kynast, W.
Conference Paper
1999Numerische Simulation des Pressens und Sinterns
Kraft, T.; Riedel, H.; Stingl, P.; Wittig, F.
Book Article
1999Numerische Simulation des Pressens und Sinterns einer Dichtscheibe aus Al2O3
Kraft, T.; Riedel, H.; Stingl, P.; Wittig, F.
Journal Article
1999State-of-the-art review - comparison of computer-models representing powder compaction process
Federzoni, L.; Riedel, H.; Coube, O.; Oldenburg, M.; Haggblad, H.A.; Gethin, D.T.; Mosbah, P.; Virta, J.; Martikainen, H.; Frachon, A.
Journal Article
1998Application of a mechanism-based creep damage model to creep crack growth in a 12 per cent chromium steel
Sester, M.; Mohrmann, R.; Riedel, H.
Conference Paper
1998Modelling of powder die compaction
Coube, O.; Riedel, H.
Book Article
1998Warping von Zahnaufnahmen zur Restauration von Zahndefekten
Riedel, H.
: Groch, W.-D. (Prüfer); Gürke, S. (Prüfer)
Thesis
1997Kriechen von Keramik unter statischer und wechselnder Belastung
Riedel, H.; Mohrmann, R.
Conference Paper
1997A liquid phase sintering model
McHugh, P.E.; Riedel, H.
Journal Article
1997Thermisch-mechanisch gekoppelte Simulation des Sinterprozesses mit einem User-Materialmodell
Sun, D.-Z.; Riedel, H.; Gaebel, R.; Parteder, E.
Conference Paper
1996Der Einfluß von Inhomogenitäten auf Verzug, Rißbildung und Eigenspannungen beim Sintern keramischer Werkstoffe
Riedel, H.; Zipse, H.; Hennies, M.; Meyer, D.
Conference Paper
1996Formgenaue und rißfreie Teile aus Hartmetall, Keramik und Sintermetall durch rechnerisch optimiertes Pressen und Sintern
Riedel, H.; Coube, O.; Gaebel, R.; McHugh, P.E.; Sun, D.-Z.; Svoboda, J.
Conference Paper
1996A model for liquid phase sintering
Svoboda, J.; Riedel, H.; Gaebel, R.
Journal Article
1996Numerische Simulation des Pressens und Sinterns in der Pulvertechnologie
Riedel, H.; Coube, O.; Gaebel, R.; Sun, D.-Z.
Conference Paper
1996Pressing and sintering in powder technology
Riedel, H.
Conference Paper
1996Thermal shock of heat exchanger tubes
Gallmann, M.; Riedel, H.; Hollstein, T.
Conference Paper
1995Mechanical behaviour of AlO2O3/MgO doped silicon nitride during liquid phase sintering
Gaebel, R.; Riedel, H.
Conference Paper
1995The mechanical behaviour of sintering powder compacts
Zipse, H.; Riedel, H.
Conference Paper
1995New solutions describing the formation of interparticle necks in solid-state sintering
Svoboda, J.; Riedel, H.
Journal Article
1995Prediction of shape distortions of hard metal parts by numerical simulation of pressing and sintering
Sun, D.-Z.; Riedel, H.
Conference Paper
1995Quasi-equilibrium sintering for coupled grain boundary and surface diffusion
Svoboda, J.; Riedel, H.
Journal Article
1994Densification and creep in the final stage of sintering
Riedel, H.; Kozak, V.; Svoboda, J.
Journal Article
1994Einfluß der Hochtemperaturkorrosion auf die mechanischen Eigenschaften von Siliziumnitriden
Gehrke, E.; Reisacher, E.; Riedel, H.
Conference Paper
1994Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering. Part 1. Computation of equilibrium surfaces
Svoboda, J.; Riedel, H.; Zipse, H.
Journal Article
1994Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering. Part 2. Diffusional densification and creep
Riedel, H.; Svoboda, J.; Zipse, H.
Journal Article
1994Micromechanical models for brittle and ductile fracture
Riedel, H.
Conference Paper
1994Numerical simulation of die pressing and sintering - development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H.
Journal Article
1994Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Svoboda, J.; Zipse, H.
Conference Paper
1993Constitutive equations for the mechanical behavior of powder compacts during sintering
Riedel, H.; Svoboda, J.; Zipse, H.; Gäbel, R.
Conference Paper
1993Fatigue behavior of silicon-nitrides at elevated temperatures.
Gehrke, E.; Riedel, H.; Berweiler, W.; Siebels, J.
Conference Paper
1993Fracture mechanisms.
Riedel, H.
Book Article
1993Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H.
Conference Paper
1993A theoretical study of grain growth in porous solids during sintering
Riedel, H.; Svoboda, J.
Journal Article
1992Mechanismen des Kriechbruchs und daraus abgeleitete Lebensdauermodelle
Riedel, H.
Conference Paper
1992Pore-boundary interactions and evolution equations for the porosity and the grain size during sintering
Svoboda, J.; Riedel, H.
Journal Article
1992Simulation of die pressing and sintering of powder metals, hard metals and ceramics
Riedel, H.; Sun, D.-Z.
Conference Paper
1991Simulation of pressing and sintering of powders.
Sun, D.-Z.; Hennies, M.; Riedel, H.
Conference Proceedings
1991Zum Einfluß von Dieselabgas auf die Festigkeit und das Ermüdungsverhalten von gesinterten Siliziumnitridkeramiken unterschiedlicher Zusammensetzung im Temperaturbereich bis 700 Grad C
Gehrke, E.; Berweiler, W.; Siebels, J.; Riedel, H.
Conference Paper
1990A constitutive model for the finite-element simulation of sintering - distortions and internal stresses.
Riedel, H.
Conference Paper
1990Crack growth and cyclic fatigue behaviour of sintered silicon nitride and syalon.
Gehrke, E.; Berweiler, W.; Riedel, H.
Conference Proceedings
1990Creep crack growth under small-scale creep conditions.
Riedel, H.
Conference Paper
1990A life prediction method for constrained grain boundary cavitation
Riedel, H.
Conference Paper
1990Numerische Analyse eines Materialmodelles für Sintern
Sun, D.-Z.; Riedel, H.
Book
1990Photovoltaic lead-chalcogenide IR-sensor arrays on Si for thermal imaging applications
Masek, J.; Maissen, C.; Zogg, H.; Platz, W.; Riedel, H.; Königer, M.; Lambrecht, A.; Tacke, M.
Journal Article
1989Creep crack growth
Riedel, H.
Conference Paper
1989Lebensdauervorhersage bei behindertem Porenwachstum
Riedel, H.
Conference Paper
1989Life prediction methods for constrained grain boundary cavitation.
Riedel, H.
Conference Paper
1989Recent advances in modelling creep crack growth
Riedel, H.
Conference Paper
1989Recent advances in modelling creep crack growth
Riedel, H.
Conference Proceedings
1987Creep crack growth in ductile, creep-resistant steels
Riedel, H.; Detampel, V.
Journal Article
1987Creep fatigue of steels in various environments
Renner, E.; Vehoff, H.; Riedel, H.; Neumann, P.
Conference Paper
1987Fracture at high temperatures
Riedel, H.
Book
1987Processing defects and strength of alumina substrates
Berweiler, W.; Varner, J.R.; Riedel, H.; Harbach, F.; Weiler, L.
Conference Proceedings
1987Prüfverfahren zur Charakterisierung der Festigkeit von Werkstoffen für den Hochtemperatureinsatz
Berweiler, W.; Mohrmann, R.; Hollstein, T.; Riedel, H.
Conference Paper
1984Probleme und Erfahrungen beim fertigungsgerechten Aufbereiten von CIF-formatierten Gate-Array Layout-Daten
Riedel, H.
Book Article