Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2016CFK-Stäube prozesssicher absaugen
Babenko, Yevgen; Gebhardt, Andreas; Nagel, Gunther
Journal Article
2016Optimierte Staubabsaugung für die Serienzerspanung von CFK
Babenko, Yevgen; Nagel, Gunther
Journal Article
2015Standard and customized correlation of crack resistance curves and Charpy upper shelf energy for German reactor pressure vessel steels
Hohe, J.; Siegele, D.; Bechler, E.; Nagel, G.
Journal Article
2011Brittle failure assessment of RPV considering loss of constraint from transient LOCA conditions
Siegele, D.; Varfolomeyev, I.; Hohe, J.; Hardenacke, V.; Nagel, G.
Conference Paper
2010Integrity assessment of a German PWR RPV considering loss of constraint
Siegele, D.; Varfolomeev, I.; Hohe, J.; Hardenacke, V.; Nagel, G.
Conference Paper
2010Probabilistic leak-before-break assessment of a main coolant line
Varfolomeev, I.; Ivanov, D.; Siegele, D.; Nagel, G.
Conference Paper
2009Inherent margin in the brittle failure assessment for RPV
Siegele, D.; Varfolomeyev, I.; Nagel, G.
Conference Paper
2008Brittle failure assessment of a PWR-RPV for operating conditions and loss of coolant accident
Siegele, D.; Varfolomeyev, I.; Nagel, G.
Journal Article
2008On the correlation of crack resistance curves on upper shelf energy for German RPV steels
Siegele, D.; Hohe, J.; Nagel, G.
Conference Paper
2008Validation of RT(T0) for German reactor pressure vessel steels
Siegele, D.; Keim, E.; Nagel, G.
Journal Article
2007Estimation of master curve based RTTO reference temperature from CVN data
Wallin, K.R.W.; Nagel, G.; Keim, E.; Siegele, D.
Journal Article
2006Validation of constraint-based methodology in structural integrity of ferritic steels for nuclear reactor pressure vessels
Lidbury, D.P.G.; Sherry, A.H.; Bass, B.R.; Gilles, P.; Connors, D.; Eisele, U.; Keim, E.; Keinanen, H.; Wallin, K.; Lauerova, D.; Marie, S.; Nagel, G.; Nilsson, K.; Siegele, D.; Wadier, Y.
Journal Article
2005Brittle failure assessment of a PWR-RPV for normal-anomalous operation and loss of coolant accident loads
Siegele, D.; Varfolomeyev, I.; Nagel, G.
Conference Paper
2005Comparison of reference temperature T0 from instability KJc and KIc fracture toughness
Siegele, D.; Keim, E.; Nagel, G.
Conference Paper
2005Estimation of master curve based RT To reference temperature from CVN data
Wallin, K.R.W.; Keim, E.; Nagel, G.; Siegele, D.
Conference Paper
2005Finanzdienstleister im Umbruch
Krapf, T.; Nagel, G.; Karapidis, A.
Book Article
2005Validation of RTTO for German reactor pressure vessel steels
Keim, E.; Nagel, G.; Siegele, D.
Conference Paper
2004Investigation of constraint effects on fracture toughness for CC(T) specimens
Siegele, D.; Varfolomeyev, I.; Wallin, K.; Nagel, G.
Conference Paper
2002Constraint based assessment of postulated nozzle corner cracks
Siegele, D.; Varfolomeyev, I.; Nagel, G.
Conference Paper
2002Failure assessment of a PWR-RPV under LOCA load considering loss of constraint
Siegele, D.; Varfolomeyev, I.; Wallin, K.; Nagel, G.
Conference Paper
2001Untersuchung zur Tragfähigkeit der Plattierung für große Unterplattierungsrisspostulate von RDB
Siegele, D.; Varfolomeyev, I.; Nagel, G.
Conference Paper
2000Experimental and numerical investigations of the warm-prestressing (WPS) effect considering different load paths
Kordisch, H.; Böschen, R.; Blauel, J.G.; Schmitt, W.; Nagel, G.
Journal Article
1999Evaluation of the standard master curve for fracture toughness determination
Nagel, G.; Blauel, J.G.
Journal Article
1999Failure assessment of RPV nozzle under loss of coolant accident
Siegele, D.; Hodulak, L.; Varfolomeev, I.; Nagel, G.
Journal Article
1999Load-carrying capacity and crack resistance of a cladding by the sigma-oscillating wire technique
Schmitt, W.; Keim, E.; Sun, D.-Z.; Blauel, J.G.; Nagel, G.
Journal Article
1998New approaches to improve the RPV material data base
Schmitt, W.; Sun, D.-Z.; Bernauer, G.; Nagel, G.
Journal Article
1996Tragverhalten und Rißwiderstand einer Plattierung nach dem Sigma-Pendeldrahtverfahren
Schmitt, W.; Keim, E.; Sun, D.-Z.; Blauel, J.G.; Nagel, G.
Conference Paper
1995Leistungsbemessung von Photovoltaik-Modulen - Kriterien für die Normung
Bücher, K.; Knaupp, W.; Nagel, G.
Conference Paper
1994Application of material models and assessment of strains in a surgeline under cyclic thermal loading
Kordisch, H.; Nagel, G.; Blauel, J.G.; Stöckl, H.; Sester, M.
Journal Article
1994Evaluation of fracture toughness based on results of instrumented charpy tests
Schmitt, W.; Sun, D.-Z.; Böhme, W.; Nagel, G.
Journal Article
1993Evaluation of fracture toughness from small specimens
Schmitt, W.; Sun, D.-Z.; Böhme, W.; Blauel, J.G.; Nagel, G.
Conference Paper
1990Analytical and numerical crack growth prediction for a leak-before-break assessment of a nuclear pressure vessel
Schmitt, W.; Nagel, G.; Ockewitz, A.; Hodulak, L.; Blauel, J.G.
Journal Article
1986Effects of ingot and wafer annealing of the properties of undoped semi-insulating GaAs. Comparison with in-alloyed dislocation-free as grown GaAs
Loehnert, K.; Nagel, G.; Wettling, W.
Conference Paper
1986Nachweis der ausreichenden zerstoerungsfreien Pruefbarkeit einer Rundnaht eines Reaktor-Druck Behaelters -RDB- im oberflaechennahen plattierten Bereich
Walte, P.; Oellrich, K.; Nagel, G.; Brinette, R.
Journal Article
1986Use of load path dependent material fracture toughness values -WPS- in the safety analysis of RPV stade
Nagel, G.; Blauel, J.G.; Hollstein, T.; Kienzler, R.
Journal Article