| | |
|---|
| 2019 | 40 Jahre nach dem "Atlas über die Sonnenstrahlung in Europa". Umfang und Qualität Heutiger Einstrahlungsdatensätze
Reise, C.; Lorenz, E.; Müller, B. | Conference Paper |
| 2019 | Additiv-Guss ein neuartiger Hybridansatz für automobile Anwendungen
Oettel, Markus; Flügel, Sebastian; Polenz, Stefan; Kleine, Andreas; Gebauer, Mathias; Müller, Bernhard | Conference Paper |
| 2019 | Auswirkungen von Active-Noise-Cancelling Kopfhörern auf kognitive Leistungsfähigkeit und Mitarbeiterzufriedenheit im Bürokontext
Müller, Benjamin; Liebl, Andreas | Conference Paper |
| 2019 | A Comparison of Two Models for the Separation of Direct and Diffuse Irradiance in Plane of Array
Guzman Razo, D.; Killinger, S.; Müller, B.; Wittwer, C. | Conference Paper |
| 2019 | Degradation bei PV Kraftwerken. Theorie und Praxis
Kiefer, K.; Farnung, B.; Müller, B.; Reinartz, K.; Rauschen, I. | Conference Paper |
| 2019 | Degradation in PV Power Plants: Theory and Practice
Kiefer, K.; Farnung, B.; Müller, B.; Reinartz, K.; Rauschen, I.; Klünter, C. | Conference Paper |
| 2019 | Development of additively manufactured miniature heat exchangers
Milaev, Nikolaus; Kordaß, Richard; Bolle, Maksym; Müller, Bernhard | Poster |
| 2019 | Einsatzpotenzial additiver Fertigung im Werkzeug- und Formenbau
Gebauer, Mathias; Oettel, Markus; Müller, Bernhard | Presentation |
| 2019 | The enzymes OSC1 and CYP716A263 produce a high variety of triterpenoids in the latex of Taraxacum koksaghyz
Pütter, K.M.; Deenen, N. van; Müller, B.; Fuchs, L.; Vorwerk, K.; Unland, K.; Bröker, J.N.; Scherer, E.; Huber, C.; Eisenreich, W.; Prüfer, D.; Schulze Gronover, C. | Journal Article |
| 2019 | Functionalization of Components by Additive Manufacturing
Gebauer, Mathias; Oettel, Markus; Müller, Bernhard | Presentation |
| 2019 | HE-LHC: The High-Energy Large Hadron Collider
Abada, A.; Abbrescia, M.; AbdusSalam, S.S.; Abdyukhanov, I.; Abelleira Fernandez, J.; Abramov, A.; Aburaia, M.; Acar, A.O.; Adzic, P.R.; Agrawal, P.; Aguilar-Saavedra, J.A.; Aguilera-Verdugo, J.J.; Aiba, M.; Aichinger, I.; Aielli, G.; Akay, A.; Akhundov, A.; Aksakal, H.; Albacete, J.L.; Albergo, S.; Alekou, A.; Aleksa, M.; Aleksan, R.; Alemany Fernandez, R.M.; Alexahin, Y.; Alía, R.G.; Alioli, S.; Alipour Tehrani, N.; Allanach, B.C.; Allport, P.P.; Altinli, M.; Altmannshofer, W.; Ambrosio, G.; Amorim, D.; Amstutz, O.; Anderlini, L.; Andreazza, A.; Andreini, M.; Andriatis, A.; Andris, C.; Andronic, A.; Angelucci, M.; Antinori, F.; Antipov, S.A.; Antonelli, M.; Antonello, M.; Antonioli, P.; Antusch, S.; Anulli, F.; Apolinario, L.; Apollinari, G.; Apollonio, A.; Appelö, D.; Appleby, R.B.; Apyan, A.; Apyan, A.; Arbey, A.; Arbuzov, A.; Arduini, G.; Ari, V.; Arias, S.; Armesto, N.; Arnaldi, R.; Arsenyev, S.A.; Arzeo, M.; Asai, S.; Aslanides, E.; Aßmann, R.W.; Astapovych, D.; Atanasov, M.; Atieh, S.; Attié | Journal Article |
| 2019 | Pegelmodelle zur Planung von (Betriebs-)Restaurants
Dickschen, Alexander; Müller, Benjamin | Conference Paper |
| 2019 | Uncovering mechanisms of rubber biosynthesis in Taraxacum koksaghyz - role of cis-prenyltransferase-like 1 protein
Niephaus, E.; Müller, B.; Deenen, N. van; Lassowskat, I.; Bonin, M.; Finkemeier, I.; Prüfer, D.; Schulze Gronover, C. | Journal Article |
| 2018 | 3D-Druck gebündelt erleben: ADDITIVE FERTIGUNG IN METALL
Müller, Bernhard | Presentation |
| 2018 | Adapted scan strategy and slicing tool for improvement of strut precision in lattice structures
Korn, Hannes; Koch, Peter; Kordaß, Richard; Holtzhausen, Stefan; Schöne, Christine; Müller, Bernhard; Stelzer, Ralph | Conference Paper |
| 2018 | Additive manufacturing markets - tooling, automotive & medical
Müller, Bernhard | Presentation |
| 2018 | Advanced micro structuring and joining technologies for direct integration of piezo fibers into metallic materials
Schubert, Andreas; Koriath, Hans-Joachim; Wittstock, Volker; Müller, Benedikt; Pierer, Alexander; Schmidt, Marek | Journal Article |
| 2018 | AM-Verfahren aus Sicht von Forschung und Wissenschaft
Müller, Bernhard | Presentation |
| 2018 | A CAD-based Workflow and Mechanical Characterization for Additive Manufacturing of Tailored Lattice Structures
Korn, Hannes; Koch, Peter; Kordaß, Richard; Holzhausen, Stefan; Schöne, Christine; Müller, Bernhard; Stelzer, Ralph | Conference Paper |
| 2018 | CAD-integrierte Schichtdatenerzeugung für feine Gitterstrukturen und Bestimmung geeigneter Fertigungsparameter für Laser-Strahlschmelzen
Korn, Hannes; Koch, Peter; Bittner, Florian; Kordaß, Richard; Holzhausen, Stefan; Müller, Bernhard; Schöne, Christine; Stelzer, Ralph | Conference Paper |
| 2018 | Demonstratorische Entwicklung eines generativ hergestellten Hochleistungs-Wärmeübertragers
Bolle, Maksym
: Müller, Bernhard | Master Thesis |
| 2018 | Dyslexia risk variant rs600753 is linked with dyslexia-specific differential allelic expression of DYX1C1
Müller, Bent; Boltze, Johannes; Czepezauer, Ivonne; Hesse, Volker; Wilcke, Arndt; Kirsten, Holger | Journal Article |
| 2018 | Einfluss der Wärmebehandlung auf die Werkstoffeigenschaften laserstrahlerschmolzener Bauteile aus AlSi10Mg und X5CrNiCuNb16-4
Rowolt, Christian; Gebauer, Mathias; Seidel, Christian; Müller, Bernhard; Milkereit, Benjamin; Kessler, Olaf | Journal Article |
| 2018 | Electrical design and oscillation states of directly integrated piezoelectric sensors and actuators in metal sheets
Schmidt, Marek; Schubert, Andreas; Koriath, Hans-Joachim; Wittstock, Volker; Müller, Benedikt; Pierer, Alexander | Presentation |
| 2018 | Entwicklung von additiven Fertigungsstrategien am Beispiel des Formen- und Werkzeugbaus
Gebauer, Mathias; Müller, Bernhard | Conference Paper |
| 2018 | Entwicklung von Interfacestrukturen für die neuartige Hybridbauweise Gießen - Generieren
Glück, Max
: Müller, Bernhard | Thesis |
| 2018 | A FeFET based super-low-power ultra-fast embedded NVM technology for 22nm FDSOI and beyond
Dünkel, S.; Trentzsch, M.; Richter, R.; Moll, P.; Fuchs, C.; Gehring, O.; Majer, M.; Wittek, S.; Müller, B.; Melde, T.; Mulaosmanovic, H.; Slesazeck, S.; Müller, S.; Ocker, J.; Noack, M.; Löhr, D.-A.; Polakowski, P.; Müller, J.; Mikolajick, T.; Höntschel, J.; Rice, B.; Pellerin, J.; Beyer, S. | Conference Paper |
| 2018 | Fraunhofer Direct Digital Manufacturing Conference, DDMC 2018
: Müller, Bernhard | Conference Proceedings |
| 2018 | From Bifaciality to Yield: Different Bifacial Cell Technologies May Differ Even More in Annual Outdoor Performance
Reise, C.; Baarah, G.; Schnabel, E.; Kräling, U.; Müller, B.; Chang, S.; Choe, Y.; Cho, H. | Conference Paper |
| 2018 | Generative Fertigungsverfahren 3D-Druck und "Laserschmelzen". Chancen und Perspektiven von generativen Fertigungsverfahren in der Kompressorentechnik. Wie können Fertigungsprozesse optimiert werden? Welche neuen Verfahren gibt es?
Müller, Bernhard; Milaev, Nikolaus | Presentation |
| 2018 | High volume production of PZT fiber arrays for direct functional integration into metal structures
Schubert, Andreas; Koriath, Hans-Joachim; Wittstock, Volker; Peter, Siegfried; Müller, Benedikt; Pierer, Alexander; Schmidt, Marek | Journal Article |
| 2018 | How additive manufacturing can shape an industry 4.0 environment
Müller, Bernhard; Frieß, Uwe; Langer, Tino; Töppel, Thomas; Gebauer, Mathias; Klaeger, Uwe; Wollbrink, Moritz; Zöllner, Volker; Lausch, Holger | Presentation |
| 2018 | IDS Reference Architecture Model. Industrial Data Space. Version 2.0
Otto, Boris; Lohmann, Steffen; Steinbuss, Sebastian; Teuscher, Andreas; Auer, Soeren; Boehmer, Martin; Bohn, Juergen; Brost, Gerd; Cirullies, Jan; Ciureanu, Constantin; Corsi, Eva; Danielsen, Soeren; Eitel, Andreas; Ernst, Thilo; Geisler, Sandra; Gelhaar, Joshua; Gude, Roland; Haas, Christian; Heiles, Juergen; Hierro, Juanjo; Hoernle, Joachim; Huber, Manuel; Jung, Christian; Juerjens, Jan; Kasprzik, Anna; Ketterl, Markus; Koetzsch, Judith; Koehler, Jacob; Lange, Christoph; Langer, Dorothea; Langkau, Joerg; Lis, Dominik; Loeffler, Sven; Loewen, Ulrich; Mader, Christian; Menz, Nadja; Mueller, Andreas; Mueller, Bernhard; Nagel, Lars; Nagel, Ralf; Nieminen, Harri; Reitelbach, Thomas; Resetko, Aleksei; Pakkala, Daniel; Patzer, Florian; Pettenpohl, Heinrich; Pietzsch, Rene; Pullmann, Jaroslav; Punter, Matthijs; Quix, Christoph; Rohrmus, Dominik; Romer, Lena; Sandloehken, Joerg; Schoewe, Patrick; Schulz, Daniel; Schuette, Julian; Schweichhart, Karsten; Sol, Egbert-Jan; Sorowka, Peter; Spiegelberg, Gernot; | Report |
| 2018 | Influences of scan strategy and exposure parameters on diameter and surface quality of struts in lattice structures
Korn, Hannes; Koch, Peter; Kordaß, Richard; Schöne, Christine; Müller, Bernhard; Holzhausen, Stefan; Stelzer, Ralph | Conference Paper |
| 2018 | Laser Beam Melting (LBM) - A Laser-based Powder Bed Fusion Additive Manufacturing Process
Müller, Bernhard | Presentation |
| 2018 | Monitoring concept for structural integration of PZT-fiber arrays in metal sheets: A numerical and experimental study
Drossel, Welf-Guntram; Schubert, Andreas; Putz, Matthias; Koriath, Hans-Joachim; Wittstock, Volker; Hensel, Sebastian; Pierer, Alexander; Müller, Benedikt; Schmidt, Marek | Journal Article |
| 2018 | A Series of Workshops and presentations provided by the Fraunhofer Additive Manufacturing Alliance
Müller, Bernhard; Aumund-Kopp, Claus; Dietz, Andreas; Klöden, Burkhardt; Hoschke, Klaus; Bierdel, Marius | Presentation |
| 2018 | Small rubber particle proteins from Taraxacum brevicorniculatum promote stress tolerance and influence the size and distribution of lipid droplets and artificial poly(cis-1,4-isoprene) bodies
Laibach, N.; Schmidl, S.; Müller, B.; Bergmann, M.; Prüfer, D.; Schulze Gronover, C. | Journal Article |
| 2018 | Smart production with additive manufacturing
Müller, Bernhard | Presentation |
| 2018 | Taraxacum brevicorniculatum rubber elongation factor TbREF associates with lipid droplets and affects lipid turn-over in yeast
Bröker, J.N.; Laibach, N.; Müller, B.; Prüfer, D.; Schulze Gronover, C. | Journal Article |
| 2018 | Technology development and control concept for vibration assisted forming of micro-channels in aluminium sheets
Schubert, Andreas; Koriath, Hans-Joachim; Müller, Benedikt; Pierer, Alexander | Presentation |
| 2018 | Unsicherheiten von Ertragsprognosen für Photovoltaik-Kraftwerke unter besonderer Berücksichtigung langfristiger Variationen des Solarstrahlungs-Potenzials
Müller, Björn
: Vajen, Klaus (Referent); Beyer, Hans Georg (Referent) | Dissertation |
| 2018 | Upregulating the mevalonate pathway and repressing sterol synthesis in Saccharomyces cerevisiae enhances the production of triterpenes
Bröker, J.N.; Müller, B.; Deenen, N. van; Prüfer, D.; Schulze Gronover, C. | Journal Article |
| 2018 | Von Daten direkt zu hochkomplexen Produkten. Fraunhofer-Allianz Generative Fertigung
Müller, Bernhard | Book Article |
| 2018 | Werkzeug- und Formenbau mittels additiver Fertigung
Müller, Bernhard; Gebauer, Mathias | Conference Paper |
| 2017 | Additive Fertigung metallischer Bauteile mit Strahlschmelzverfahren
Müller, Bernhard; Klöden, Burkhardt | Presentation |
| 2017 | Additive Manufacturing für den Werkzeugbau
Gebauer, Mathias; Müller, Bernhard | Presentation |
| 2017 | Angle dependence of solar cells and modules: The role of cell texturization
Geisemeyer, I.; Tucher, N.; Müller, B.; Steinkemper, H.; Hohl-Ebinger, J.; Schubert, M.C.; Warta, W. | Journal Article |
| 2017 | ATP2C2 and DYX1C1 are putative modulators of dyslexia-related MMR
Müller, Bent; Schaadt, Gesa; Boltze, Johannes; Emmrich, Frank; Skeide, Michael A.; Neef, Nicole; Kraft, Indra; Brauer, Jens; Friederici, Angela D.; Kirsten, Holger; Wilcke, Arndt | Journal Article |
| 2017 | Autonomer Flammenionisationsdetektor für den Explosionsschutz in Kanalisationsnetzen
Kuipers, Winfred; Förster, Jan; Koch, Christian; Goldberg, Adrian; Lenz, Christian; Ziesche, Steffen; Bechtold, F.; Jurkow, Dominik; Ruffmann, Bastian; Maurer, Peter; Großklags, Frank; Müller, Bettina | Journal Article |
| 2017 | Blechwarmumformung
Gebauer, Mathias; Müller, Bernhard | Book Article |
| 2017 | Building up the future: Transformations in additive manufacturing
Müller, Bernhard | Presentation |
| 2017 | CAD-integrated modelling of lattice structures for additive manufacturing and property evaluation of generated specimens
Kordaß, Richard; Koch, Peter; Töppel, Thomas; Korn, Hannes; Schöne, Christine; Müller, Bernhard; Stelzer, Ralph | Conference Paper |
| 2017 | Comprehensive analysis of optical texture properties at solar cell and module level using the OPTOS formalism
Tucher, N.; Müller, B.; Jakob, P.; Eisenlohr, J.; Höhn, O.; Hauser, H.; Goldschmidt, J.C.; Hermle, M.; Bläsi, B. | Presentation |
| 2017 | Design for additive manufacturing. Guidelines and case studies for metal applications
Müller, Bernhard; Schnabel, Torsten; Oettel, Markus; Töppel, Thomas; Gebauer, Mathias; Klöden, Burkhardt; Aumund-Kopp, Claus; Hoschke, Klaus; Pfaff, Aron | Presentation |
| 2017 | Design for AM & metal AM processes
Müller, Bernhard; Klöden, Burkhardt | Presentation |
| 2017 | Dyslexia risk gene relates to representation of sound in the auditory brainstem
Neel, Nicole E.; Müller, Bent; Liebig, Johanna; Schaadt, Gesa; Grigutsch, Maren; Gunter, Thomas C.; Wilcke, Arndt; Kirsten, Holger; Skeide, Michael A.; Kraft, Indra; Kraus, Nina; Emmrich, Frank; Brauer, Jens; Boltze, Johannes; Friederici, Angela D. | Journal Article |
| 2017 | The effect of manufacturing conditions on discontinuity population and fatigue fracture behavior in carbon/epoxy composites
Hakim, I.; Laquai, R.; Walter, D.; Mueller, B.; Graja, P.; Meyendorf, N.; Donaldson, S. | Conference Paper |
| 2017 | Experimental and numerical study on inherent sensory characteristics of piezoceramic micro parts during joining by forming in metal sheets
Drossel, Welf-Guntram; Schubert, Andreas; Koriath, Hans-Joachim; Wittstock, Volker; Putz, Matthias; Peter, Siegfried; Hensel, Sebastian; Müller, Benedikt; Schmidt, Marek; Pierer, Alexander | Conference Paper |
| 2017 | Festphasenumwandlungen in konventionellem sowie laserstrahlgeschmolzenem AlSi10Mg und X5CrNiCuNb16-4
Rowolt, Christian; Gebauer, Mathias; Müller, Bernhard; Seidel, Christian; Milkereit, Benjamin; Kessler, Olaf | Journal Article, Conference Paper |
| 2017 | Funktionsintegration für Werkzeuge und Formen mittels generativer Fertigung - Anwendungsbeispiele aus der Ur- und Umformtechnik
Gebauer, Mathias; Müller, Bernhard | Presentation |
| 2017 | Funktionsintegration mittels Laserstrahlschmelzen - metallischer 3D-Druck für innovative Bauteile und Werkzeuge
Müller, Bernhard; Töppel, Thomas | Conference Paper |
| 2017 | Hochleistungswerkzeuge durch Laser-Strahlschmelzen in der Blechumformung
Oettel, Markus; Gebauer, Mathias; Müller, Bernhard; Spierings, Adriaan; Stoll, Philipp; Feld, Tobias; Klinger, Marcel; Zurbrügg, Andreas | Conference Paper |
| 2017 | Identification and characterization of genetic risk variants for dyslexia with regard to predictive aspects
Müller, B. | Dissertation |
| 2017 | In-process monitoring of joining operations for piezoceramic elements
Müller, Benedikt; Pierer, Alexander; Schmidt, Marek; Schubert, Andreas; Koriath, Hans-Joachim; Putz, Matthias; Wittstock, Volker | Conference Paper |
| 2017 | In-situ Untersuchung des Umwandlungsverhaltens bei der Wärmebehandlung des aushärtbaren Stahls X5CrNiCuNb16-4
Rowolt, Christian; Milkereit, Benjamin; Kessler, Olaf; Gebauer, Mathias; Kamps, Tobias; Seidel, Christian; Müller, Bernhard | Presentation |
| 2017 | Kombination aktiver Werkstoffe und additiver Fertigung für alternative Implantatkonzepte
Rotsch, Christian; Töppel, Thomas; Gille, Katarina; Hunger, Sandra; Werner, Michael; Müller, Bernhard; Lausch, Holger | Presentation |
| 2017 | Konzeptentwicklung für generativ gefertigte Hochleistungs-Miniaturwärmeübertrager
Müller, Bernhard; Kordaß, Richard; Gebauer, Mathias; Oettel, Markus | Presentation |
| 2017 | Laserbasierte Fertigungstechniken und additive Fertigung
Boehr, S.; Nolis, P.; Brenner, A.; Reininghaus, M.; Lamß, M.; Müller, B. | Journal Article |
| 2017 | Laserstrahlgeschmolzene Bauteile - Wärmebehandlung optimiert Werkstoffeigenschaften
Rowolt, Christian; Milkereit, Benjamin; Kessler, Olaf; Kamps, Tobias; Seidel, Christian; Müller, Bernhard; Gebauer, Mathias | Conference Paper |
| 2017 | Laserstrahlschmelzen im Werkzeugbau für die Blechwarmumformung
Oettel, Markus; Gebauer, Mathias; Müller, Bernhard; Spierings, Adriaan; Stoll, Philipp; Feld, Tobias; Klinger, Marcel; Zurbrügg, Andreas | Presentation |
| 2017 | Metal Additive Manufacturing
Effinger, Markus; Müller, Bernhard | Book |
| 2017 | Möglichkeiten der generativen Fertigung für die Feinwerktechnik
Müller, Bernhard | Conference Paper |
| 2017 | Optical performance of the honeycomb texture - a cell and module level analysis using the OPTOS formalism
Tucher, N.; Müller, B.; Jakob, P.; Eisenlohr, J.; Höhn, O.; Hauser, H.; Goldschmidt, J.C.; Hermle, M.; Bläsi, B. | Journal Article, Conference Paper |
| 2017 | QCPV: A quality control algorithm for distributed photovoltaic array power output
Killinger, S.; Engerer, N.; Müller, B. | Journal Article |
| 2017 | Transformation kinetics during heat treatment of additive manufactured alloys AlSi10Mg & X5CrNiCuNb16-4
Rowolt, Christian; Gebauer, Mathias; Kamps, Tobias; Seidel, Christian; Müller, Bernhard; Milkereit, Benjamin; Kessler, Olaf | Conference Paper |
| 2017 | Überblick zu Additive-Manufacturing-Verfahren im Industrie-Einsatz
Müller, Bernhard | Presentation |
| 2017 | Understanding the Why, What, and How of Theories in IS Research
Mueller, B.; Urbach, N. | Journal Article |
| 2017 | Upscaling PV power considering module orientations
Killinger, S.; Guthke, P.; Semmig, A.; Müller, B.; Wille-Haussmann, B.; Fichtner, W. | Journal Article |
| 2017 | Workshop 3: Conformal Cooling with AM
Müller, Bernhard | Presentation |
| 2016 | 3D EIT image reconstruction with GREIT
Grychtol, Bartlomiej; Müller, Beat; Adler, Andy | Journal Article |
| 2016 | 3D-Druck von Metallen als Substitution und Wettbewerb von Gussteilen?
Müller, Bernhard | Presentation |
| 2016 | 3rd Fraunhofer Direct Digital Manufacturing Conference, DDMC 2016. Proceedings
: Müller, Bernhard | Conference Proceedings |
| 2016 | Assessing IT management's performance
Ebner, Katharina; Mueller, Benjamin; Urbach, Nils; Riempp, Gerold; Krcmar, Helmut | Journal Article |
| 2016 | Association, characterisation and meta-analysis of SNPs linked to general reading ability in a German dyslexia case-control cohort
Müller, Bent; Wilcke, Arndt; Czepezauer, Ivonne; Ahnert, Peter; Boltze, Johannes; Kirsten, Holger; Friederici, Angela D.; Emmrich, Frank; Brauer, Jens; Neef, Nicole; Skeide, Michael A.; Schaadt, Gesa; Kraft, Indra; Dörr, Liane | Journal Article |
| 2016 | Eigenspannungen und Verzug beim additiven Laser-Strahlschmelzen
Töppel, Thomas; Müller, Bernhard; Hoeren, Karlheinz P.J.; Witt, Gerd | Journal Article |
| 2016 | Flächendetektor für EUV- und/oder weiche Röntgenstrahlung
Herbert, Stefan; Juschkin, Larissa; Danylyuk, Serhiy; Müller, Bernhard | Patent |
| 2016 | Forizymes-functionalised artificial forisomes as a platform for the production and immobilisation of single enzymes and multi-enzyme complexes
Visser, F.; Müller, B.; Rose, J.; Prüfer, D.; Noll, G.A. | Journal Article |
| 2016 | Funktionsintegration in Werkzeuge und Formen durch generative Fertigungsverfahren - Anwendungsbeispiele und Ausblick
Müller, Bernhard; Gebauer, Mathias | Presentation |
| 2016 | High acceptance of an early dyslexia screening test involving genetic analyses in Germany
Wilcke, Arndt; Müller, Bent; Schaadt, Gesa; Friederici, Angela D.; Emmrich, Frank; Brauer, Jens; Neef, Nicole; Skeide, Michael A.; Kraft, Indra; Czepezauer, Ivonne; Bobovnikov, Nadin; Kirsten, Holger; Boltze, Johannes | Journal Article |
| 2016 | High performance sheet metal forming tooling by additive manufacturing
Gebauer, Mathias; Müller, Bernhard; Spierings, Adriaan; Polster, Stefan; Stoll, Philipp; Feld, Tobias; Klinger, Marcel; Zurbrügg, Andreas | Conference Paper |
| 2016 | How laser beam melting can influence the sustainability of tooling applications
Oettel, Markus; Müller, Bernhard; Töppel, Thomas; Gebauer, Mathias | Presentation |
| 2016 | Identification of typical quality control issues in distributed PV power measurements
Killinger, S.; Engerer, N.; Müller, B. | Conference Paper |
| 2016 | Impact of the solar eclipse from 20th March 2015 on the German Electrical Supply - simulation and analysis
Killinger, S.; Kreifels, N.; Burger, B.; Müller, B.; Stiff, G.; Wittwer, C. | Journal Article |
| 2016 | Improved prediction of complex diseases by common genetic markers
Müller, Bent; Wilcke, Arndt; Boulesteix, Anne-Laure; Brauer, Jens; Passarge, Eberhard; Boltze, Johannes; Kirsten, Holger | Journal Article |
| 2016 | Inherent Process Monitoring for Piezoceramic Transducer Integration
Drossel, Welf-Guntram; Schubert, Andreas; Koriath, Hans-Joachim; Wittstock, Volker; Peter, Siegfried; Hensel, Sebastian; Nestler, Matthias; Jahn, Stephan; Müller, Roland; Müller, Benedikt; Schmidt, Marek; Pierer, Alexander; Putz, Matthias | Conference Paper |
| 2016 | NRSN1 associated grey matter volume of the visual word form area reveals dyslexia before school
Skeide, Michael A.; Kraft, Indra; Müller, Bent; Schaadt, Gesa; Neef, Nicole E.; Brauer, Jens; Wilcke, Arndt; Kirsten, Holger; Boltze, Johannes; Friederici, Angela D. | Journal Article |
| 2016 | Patch-based nonlinear image registration for gigapixel whole slide images
Lotz, J.; Olesch, J.; Müller, B.; Polzin, T.; Galuschka, P.; Lotz, J.M.; Heldmann, S.; Laue, H.; Gonzáles-Vallinas, M.; Warth, A.; Lahrmann, B.; Grabe, N.; Sedlaczek, O.; Breuhahn, K.; Modersitzki, J. | Journal Article |
| 2016 | Potentiale der Anwendung additiver Fertigung im Werkzeug- und Formenbau
Müller, Bernhard | Presentation |
| 2016 | Predicting early signs of dyslexia at a preliterate age by combining behavioral assessment with structural MRI
Kraft, Indra; Schreiber, Jan; Cafiero, Riccardo; Metere, Riccardo; Schaadt, Gesa; Brauer, Jens; Neef, Nicole E.; Müller, Bent; Kirsten, Holger; Boltze, Johannes; Friederici, Angela D.; Skeide, Michael A. | Journal Article |
| 2016 | Projection of power generation between differently-oriented PV systems
Killinger, S.; Braam, F.; Müller, B.; Wille-Haussmann, B.; McKenna, R. | Journal Article |
| 2016 | Projektion der PV-Leistung zwischen Anlagen unterschiedlicher Modulausrichtung
Killinger, S.; Braam, F.; Müller, B.; Wille-Haussmann, B.; McKenna, R. | Poster |
| 2016 | Quantification of Hepcidin-related iron accumulation in the rat liver
Böser, P.; Mordashova, Y.; Maasland, M.; Trommer, I.; Lorenz, H.; Hafner, M.; Seemann, D.; Mueller, B.K.; Popp, A. | Journal Article |
| 2016 | Structural integration of piezoceramic fibers in deep drawn sheet metal for material-integrated health monitoring
Müller, Michael; Müller, Benedikt; Hensel, Sebastian; Nestler, Matthias; Jahn, Stephan F.; Müller, Roland; Schubert, Andreas; Drossel, Welf-Guntram | Journal Article |
| 2016 | Towards a pathway inventory of the human brain for modeling disease mechanisms underlying neurodegeneration
Iyappan, A.; Gündel, M.; Shahid, M.; Wang, J.; Li, H.; Mevissen, H.-T.; Müller, B.; Fluck, J.; Jirsa, V.; Domide, L.; Younesi, E.; Hofmann-Apitius, M. | Journal Article |
| 2016 | Towards an improved nowcasting method by evaluating power profiles of PV systems to detect apparently atypical behavior
Killinger, S.; Müller, B.; Saint-Drenan, Y.-M.; McKenna, R. | Conference Paper |
| 2016 | Tribological impact of the finishing technology onto meso- and microforming processes
Jahn, S.F.; Müller, B.; Hilfinger, F.S.; Schubert, A. | Journal Article |
| 2016 | Yield predictions for photovoltaic power plants: Empirical validation, recent advances and remaining uncertainties
Müller, B.; Hardt, L.; Armbruster, A.; Kiefer, K.; Reise, C. | Journal Article, Conference Paper |
| 2015 | Additive Fertigung - Industrierelevante Anwendungen im Werkzeugbau und der Produktherstellung
Seidel, Christian; Müller, Bernhard; Riss, Fabian Karl Eberhard | Presentation |
| 2015 | Additive Fertigung für den Werkzeugbau
Rädel, Thomas; Müller, Bernhard | Presentation |
| 2015 | Additive Fertigung für Spritzgieß- und Umformwerkzeuge
Rädel, Thomas; Müller, Bernhard | Presentation |
| 2015 | Additive manufacturing at Fraunhofer - advances in metal additive manufacturing
Riedel, Frank; Müller, Bernhard; Wiener, Thomas; Grimm, Sebastian | Presentation |
| 2015 | Cortical differences in preliterate children at familiar risk of dyslexia are similar to those observed in dyslexic readers
Kraft, Indra; Cafiero, Riccardo; Schaadt, Gesa; Brauer, Jens; Neef, Nicole; Müller, Bent; Kirsten, Holger; Wilcke, Arndt; Boltze, Johannes; Friederici, Angela D.; Skeide, Michael A. | Journal Article |
| 2015 | Eigenspannungen und Verzüge im Laserstrahlschmelzprozess
Töppel, Thomas; Müller, Bernhard; Hoeren, Karlheinz P.J.; Witt, Gerd | Poster |
| 2015 | Eigenspannungen und Verzüge im Strahlschmelzprozess - Untersuchung der verschiedenen Einflüsse und Maßnahmen zur Reduzierung
Töppel, Thomas; Müller, Bernhard; Hoeren, Karlheinz P.J.; Witt, Gerd | Report |
| 2015 | Experimental and numerical study on the electro-mechanical behavior of piezoceramic fibers during joining by forming
Drossel, Welf-Guntram; Schubert, Andreas; Koriath, Hans-Joachim; Wittstock, Volker; Peter, Siegfried; Müller, Roland; Müller, Michael; Hensel, Sebastian; Nestler, Matthias; Jahn, Stephan F.; Pierer, Alexander; Müller, Benedikt; Schmidt, Marek | Conference Paper |
| 2015 | Exploring the path to success
Ebner, Katharina; Urbach, Nils; Mueller, Benjamin | Journal Article |
| 2015 | Generativ gefertigte Werkzeuge mit gezielt porösen Strukturen zur Werkzeugentlüftung an in einem Fertigungsschritt
Gebauer, Mathias; Müller, Bernhard; Schubert, Thomas; Heller, Rene; Baumgartner, Marie | Presentation |
| 2015 | Generative Bauteilfertigung - Wettbewerb zum Druckgießen oder wertvolle Ergänzung der Fertigungstechnik?
Müller, Bernhard | Presentation |
| 2015 | Generative Fertigungsverfahren ermöglichen neuartige Bauteilgestaltung und Produktdesigns
Müller, Bernhard | Presentation |
| 2015 | Genetic dyslexia risk variant is related to neural connectivity patterns underlying phonological awareness in children
Skeide, Michael A.; Kirsten, Holger; Kraft, Indra; Schaadt, Gesa; Müller, Bent; Neef, Nicole; Brauer, Jens; Wilcke, Arndt; Emmrich, Frank; Boltze, Johannes; Friederici, Angela D. | Journal Article |
| 2015 | Inhalation toxicity of carbon black depends on surface coating with polycyclic aromatic hydrocarbons
Hansen, Tanja; König, P.; Creutzenberg, Otto H.; Weinhold, K.; Schlick, S.; Tillmann, Thomas; Pohlmann, Gerhard; Kolling, Angelika; Ziemann, Christina; Kopf, Johannes; Ströbele, Michael; Bockhorn, H.; Danov, Olga; Sewald, Katherina; Müller, B.; Fehrenbach, Heinz | Abstract |
| 2015 | Investigation of tribological properties of AlMg4,5Mn0,7 in a warm forming process using the barrel compression test
Müller, B.; Jahn, S.F.; Fang, R.; Schubert, A. | Conference Paper |
| 2015 | Investment risks of utility-scale PV: Opportunities and limitations of risk mitigation strategies to reduce uncertainties of energy yield predictions
Müller, B.; Heydenreich, W.; Reich, N.; Reise, C.; Farnung, B. | Conference Paper |
| 2015 | Knowledge retrieval from PubMed abstracts and electronic medical records with the multiple sclerosis ontology
Malhotra, A.; Gündel, M.; Rajput, A.M.; Mevissen, H.T.; Saiz, A.; Pastor, X.; Lozano-Rubi, R.; Martinez-Lapsicina, E.H.; Zubizarreta, I.; Mueller, B.; Kotelnikova, E.; Toldo, L.; Hofmann-Apitius, M.; Villoslada, P. | Journal Article |
| 2015 | Laser Beam Melting for added value in tooling applications
Töppel, Thomas; Müller, Bernhard; Gebauer, Mathias | Presentation |
| 2015 | Laser-Strahlschmelzen für Anwendungen im Werkzeugbau
Müller, Bernhard | Presentation |
| 2015 | Less residual stresses in laser beam melting by investigating on supports, powder layer properties, powder preheating and scanning strategies
Sehrt, Jan T.; Witt, Gerd; Müller, Bernhard; Töppel, Thomas; Hoeren, Karlheinz P.J.; Reinarz, Bernd | Presentation |
| 2015 | Material Efficiency - Potentials of Innovative Production Methods
Müller, Bernhard; Grüning, Tina; Drossel, Welf-Guntram | Presentation |
| 2015 | New approach for monitoring piezoceramic fibers during joining by forming
Drossel, Welf-Guntram; Koriath, Hans-Joachim; Schubert, Andreas; Wittstock, Volker; Peter, Siegfried; Hensel, Sebastian; Nestler, Matthias; Jahn, Stephan; Müller, Roland; Müller, Benedikt; Schmidt, Marek; Pierer, Alexander | Presentation |
| 2015 | Novel sheet metal parts with sensor and actuator mode of operation
Drossel, Welf-Guntram; Schubert, Andreas; Nestler, Matthias; Hensel, Sebastian; Müller, Roland; Müller, Michael; Müller, Benedikt; Jahn, Stephan | Conference Paper |
| 2015 | On the impact of solar spectral irradiance on the yield of different PV technologies
Dirnberger, D.; Blackburn, G.; Müller, B.; Reise, C. | Journal Article |
| 2015 | On the uncertainty of energetic impact on the yield of different PV technologies due to varying spectral irradiance
Dirnberger, D.; Müller, B.; Reise, C. | Journal Article |
| 2015 | On-site performance verification to reduce yield prediction uncertainities
Reich, N.; Zenke, J.; Müller, B.; Kiefer, K.; Farnung, B. | Conference Paper |
| 2015 | PDON: Parkinson's disease ontology for representation and modeling of the Parkinson's disease knowledge domain
Younesi, E.; Malhotra, A.; Gündel, M.; Scordis, P.; Kodamullil, A.T.; Page, M.; Müller, B.; Springstubbe, S.; Wüllner, U.; Scheller, D.; Hofmann-Apitius, M. | Journal Article |
| 2015 | Projections of long-term changes in solar radiation based on CMIP5 climate models and their influence on energy yields of photovoltaic systems
Wild, M.; Folini, D.; Henschel, F.; Müller, B. | Journal Article |
| 2015 | PV module energy rating: Opportunities and limitations
Dirnberger, D.; Müller, B.; Reise, C. | Journal Article |
| 2015 | Socio-Economic Assessment of the Danube Region: State of the Region, Challenges and Strategy Development
Müller, Bettina; Hannes, Leo
: Hörcher, Günter (Mitarb.); et. al. | Report |
| 2015 | Software support for combined staging of lung cancer in CT, functional MRI and pathology
Laue, H.O.A.; Kohlmann, P.; Lotz, J.; Sedlaczek, O.; Müller, B.; Breuhahn, K.; Grabe, N.; Warth, A.; Hahn, H. | Abstract |
| 2015 | Strahlschmelzen im Werkzeug- und Formenbau - Merkmale und Effekte im Überblick
Müller, Bernhard | Presentation |
| 2015 | Tribological impact of the finishing technology onto meso- and microforming processes
Jahn, S.F.; Müller, B.; Hilfinger, F.S.; Schubert, A. | Conference Paper |
| 2014 | Additive Fertigung metallischer Komponenten für die Medizintechnik
Töppel, Thomas; Müller, Bernhard | Presentation |
| 2014 | Additive Manufacturing at Fraunhofer. How to develop "3D Printing" technologies into industrial application
Müller, Bernhard | Presentation |
| 2014 | ADO: A disease ontology representing the domain knowledge specific to Alzheimer's disease
Malhotra, A.; Younesi, E.; Gündel, M.; Müller, B.; Heneka, M.T.; Hofmann-Apitius, M. | Journal Article |
| 2014 | Advanced material studies for additive manufacturing in terms of future gear application
Bräunig, Jan; Töppel, Thomas; Müller, Bernhard; Burkhardt, Martin; Hipke, Thomas; Drossel, Welf-Guntram | Journal Article |
| 2014 | Development and trends of additive manufacturing processes
Hipke, Thomas; Müller, Bernhard; Gebauer, Mathias | Conference Paper |
| 2014 | Development and trends of additive manufacturing processes
Hipke, Thomas; Müller, Bernhard; Gebauer, Mathias | Presentation |
| 2014 | Evaluation of tribological properties of AlMg4.5Mn0.7 in massive microforming using the barrel compression test
Schubert, A.; Jahn, S.F.; Müller, B. | Conference Paper |
| 2014 | Experimental and numerical study on shaping of aluminum sheets with integrated piezoceramic fibers
Drossel, Welf-Guntram; Hensel, Sebastian; Lachmann, Lutz; Nestler, Matthias; Schubert, Andreas; Müller, Benedikt; Müller, Michael | Journal Article |
| 2014 | Generative Fertigung im Maschinenbau - industrieller 3D-Druck auf dem Weg in die Serienproduktion
Müller, Bernhard | Conference Paper |
| 2014 | Generative Fertigungsverfahren (Rapid Prototyping, Additive Manufacturing)
Müller, Bernhard | Book Article |
| 2014 | Genetic risk variants for dyslexia on chromosome 18 in a german cohort
Müller, Bent; Ahnert, Peter; Burkhardt, Jana; Brauer, J.; Czepezauer, Ivonne; Quente, Elfi; Boltze, Johannes; Wilcke, Arndt; Kirsten, Holger | Journal Article |
| 2014 | Joining by forming of piezoceramic macro-fiber arrays within micro-structured surfaces of aluminum sheets
Schubert, Andreas; Wittstock, Volker; Jahn, Stephan F.; Müller, Benedikt; Müller, Michael | Journal Article |
| 2014 | Less residual stresses in laser beam melting through a holistic approach including laser, scanning, material and machine parameters
Müller, Bernhard; Töppel, Thomas; Kranz, Burkhard; Hoeren, Karlheinz P.J.; Grimm, Tobias; Witt, Gerd | Conference Paper |
| 2014 | Mehrertrag durch Global Brightening - Einfluss aktueller Einstrahlungsdaten auf prognostizierte PV-Erträge
Müller, B.; Hardt, L.; Driesse, A.; Reise, C. | Conference Paper |
| 2014 | Metal Additive Manufacturing for tooling applications - Laser Beam Melting technology increases efficiency of dies and molds
Müller, Bernhard; Gebauer, Mathias; Hund, Ralf; Malek, Roland; Gerth, Nancy | Conference Paper |
| 2014 | Modular tool concept and process design for micro impact extrusion
Schubert, Andreas; Jahn, Stephan F.; Müller, Benedikt | Journal Article |
| 2014 | Molecular and ultrastructural analysis of forisome subunits reveals the principles of forisome assembly
Müller, B.; Groscurth, S.; Menzel, M.; Rüping, B.A.; Twyman, R.M.; Prüfer, D.; Noll, G.A. | Journal Article |
| 2014 | Multifunctional implants realised by additive manufacturing
Müller, Bernhard; Töppel, Thomas | Presentation |
| 2014 | Präzise Leistungs- und Performance-Bewertung von PV-Kraftwerken im laufenden Betrieb
Steinhüser, A.; Müller, B.; Reise, C. | Conference Paper |
| 2014 | Ressource-efficient hot sheet metal forming by innovative die cooling with laser beam melted tooling components
Müller, Bernhard; Gebauer, Mathias; Polster, Stefan; Neugebauer, Reimund; Malek, Roland; Kotzian, Mathias; Hund, Ralf | Conference Paper |
| 2014 | Ressourceneffiziente Blechwarmumformung durch innovative Werkzeugtemperierung mittels laserstrahlgeschmolzener Werkzeugaktivkomponenten
Müller, Bernhard; Gebauer, Mathias; Hund, Ralf; Kotzian, Matthias; Malek, Roland; Polster, Stefan | Book Article |
| 2014 | Rethinking solar resource assessments in the context of global dimming and brightening
Müller, B.; Wild, M.; Driesse, A.; Behrens, K. | Journal Article |
| 2014 | Smart metal sheets by direct functional integration of piezoceramic fibers in microformed structures
Schubert, Andreas; Wittstock, Volker; Koriath, Hans-Joachim; Jahn, Stephan F.; Peter, S.; Müller, B.; Müller, M. | Journal Article |
| 2014 | Solving the forward kinematics of cable-driven parallel robots with neural networks and interval arithmetic
Schmidt, Valentin; Müller, Bertram; Pott, Andreas | Conference Paper |
| 2014 | Structural integration of PZT fibers in deep drawn sheet metal for material-integrated sensing and actuation
Müller, Benedikt; Müller, Michael; Hensel, Sebastian; Nestler, Matthias; Jahn, Stephan F.; Wittstock, Volker; Schubert, Andreas; Drossel, Welf-Guntram | Conference Paper |
| 2014 | Structural integration of PZT fibers in deep drawn sheet metal for material-integrated sensing and actuation
Müller, Benedikt; Müller, Michael; Hensel, Sebastian; Nestler, Matthias; Jahn, Stephan F.; Wittstock, Volker; Schubert, Andreas; Drossel, Welf-Guntram | Journal Article, Conference Paper |
| 2014 | Uncertain role of MtSEO-F3 in assembly of Medicago truncatula forisomes
Groscurth, S.; Müller, B.; Visser, F.; Blob, B.; Menzel, M.; Rüping, B.A.; Twyman, R.M.; Prüfer, D.; Noll, G.A. | Journal Article |
| 2014 | Yield predictions for photovoltaic power plants: Empirical validation, recent advances and remaining uncertainties
Müller, B.; Hardt, L.; Armbruster, A.; Kiefer, K. | Conference Paper |
| 2014 | Zooming in: High resolution 3D reconstruction of differently stained histological whole slide images
Lotz, J.; Berger, J.; Müller, B.; Breuhahn, K.; Grabe, N.; Heldmann, S.; Homeyer, A.; Lahrmann, B.; Laue, H.; Olesch, J.; Schwier, M.; Sedlaczek, O.; Warth, A. | Conference Paper |
| 2014 | Die Zukunft der generativen Fertigung - Perspektiven für den Werkzeugbau
Müller, Bernhard | Presentation |
| 2013 | 3D-Druck im Kommen
Müller, B.; Neugebauer, R. | Journal Article |
| 2013 | Added value in tooling for sheet metal forming through additive manufacturing
Müller, Bernhard; Hund, Ralf; Malek, Roland; Gebauer, Mathias; Polster, Stefan; Kotzian, Mathias; Neugebauer, Reimund | Conference Paper |
| 2013 | Advances in metal additive manufacturing
Müller, Bernhard | Presentation |
| 2013 | Capturing of contemporary dance for preservation and presentation of choreographies in online scores
Kahn, Svenja; Keil, Jens; Müller, Benedikt; Bockholt, Ulrich; Fellner, Dieter W. | Conference Paper |
| 2013 | CarbonBlack: A joint research project to establish a test system for predicting human-toxicological effects of synthetic carbon black nanoparticles
Fehrenbach, Heinz; Müller, B.; König, P.; Hansen, Tanja; Bockhorn, H. | Journal Article, Conference Paper |
| 2013 | Deep drawing of metal sheets with integrated piezo-metal substructures
Neugebauer, Reimund; Schubert, Andreas; Drossel, Welf-Guntram; Lachmann, Lutz; Koriath, Hans-Joachim; Jahn, Stephan F.; Nestler, Matthias; Hensel, Sebastian; Müller, M.; Müller, B. | Conference Paper |
| 2013 | Handlungsfelder des additiven Fertigungsverfahrens Strahlschmelzen
Kleszczynski, Stefan; Hoeren, Karlheinz P.J.; Töppel, Thomas; Jacobsmühlen, Joschka zur; Müller, Bernhard; Witt, Gerd | Conference Paper |
| 2013 | High speed LAM
Kelbassa, I.; Gasser, A.; Meiners, W.; Backes, G.; Müller, B. | Conference Paper |
| 2013 | Integration von Piezosensorik in Aluminiumbleche für das Structural Health Monitoring
Schubert, Andreas; Neugebauer, Reimund; Jahn, Stephan; Müller, Michael; Müller, Benedikt | Conference Paper |
| 2013 | Investigation of fuel cell materials and liquid water transport by means of synchrotron imaging
Markötter, H.; Haußmann, J.; Alink, R.; Dittmann, K.; Tötzke, C.; Krüger, P.; Klages, M.; Arlt, T.; Müller, B.; Riesemeier, H.; Scholta, J.; Gerteisen, D.; Manke, I.; Banhart, J. | Conference Paper |
| 2013 | Laser beam melting for tooling applications - new perspectives for resource-efficient metal forming and die casting processes
Müller, Bernhard; Hund, Ralf; Malek, Roland; Gerth, Nancy | Conference Paper |
| 2013 | Lung alterations following single or multiple low-dose carbon black nanoparticle aspirations in mice
Schreiber, N.; Ströbele, M.; Kopf, J.; Hochscheid, R.; Kotte, E.; Weber, P.; Hansen, T.; Bockhorn, H.; Müller, B. | Journal Article |
| 2013 | Metal additive manufacturing by laser beam melting. Highlights in applied research at Fraunhofer IWU
Müller, Bernhard; Gebauer, Mathias | Poster |
| 2013 | Microfabricated piezo-metal substructures for sensor integration in large sheet metal parts
Neugebauer, Reimund; Schubert, Andreas; Koriath, Hans-Joachim; Jahn, Stephan F.; Müller, Benedikt; Müller, Michael | Conference Paper |
| 2013 | Microstructuring by a combination of micro impact extrusion and shear displacement forming
Schubert, Andreas; Jahn, Stephan; Müller, Benedikt | Conference Paper |
| 2013 | Potenziale für den Werkzeugbau
Müller, Bernhard; Albert, André | Journal Article |
| 2013 | Prozessoptimierung im Druckguss - Laserstrahlgeschmolzener Werkzeugeinsatz im Praxistest
Müller, Bernhard; Gerth, Nancy; Hamann, Ingolf; Fischer, Andreas; Rädel, Thomas; Gebauer, Mathias; Töppel, Thomas | Journal Article |
| 2012 | Artificial forisomes are Ideal models of forisome assembly and activity that allow the development of technical devices
Groscurth, S.; Müller, B.; Schwan, S.; Menzel, M.; Diekstall, F.; Senft, M.; Kendall, A.; Kommor, B.A.; Neumann, U.; Kalischuk, M.; Kawchuk, L.M.; Krzyzanek, V.; Heilmann, A.; Stubbs, G.; Twyman, R.M.; Prüfer, D.; Noll, G.A. | Journal Article |
| 2012 | Artifizielle Forisomenkörper mit SEO-F-Fusionsproteinen, pflanzliche oder Hefezellen mit Vektoren, die für diese Proteine codieren, sowie Vektoren, die für SEO-F-Fusionsproteine codieren
Müller, Boje; Prüfer, Dirk; Fischer, R. | Patent |
| 2012 | Functional integration in implants through additive manufacturing technology and smart materials
Müller, Bernhard; Töppel, Thomas; Rotsch, Christian; Böhm, Andrea; Bräunig, Jan; Neugebauer, Reimund | Presentation |
| 2012 | Generativ gefertigte Werkzeuge mit Mehrwert für die Blechumformung
Müller, Bernhard; Hund, R.; Malek, R.; Kotzian, M.; Gebauer, Mathias; Polster, S.; Neugebauer, Reimund | Conference Paper |
| 2012 | High speed LAM
Kelbassa, I.; Gasser, A.; Meiners, W.; Backes, G.; Müller, B. | Conference Paper |
| 2012 | Influence of different tool materials, coatings and lubrications onto shape accuracy during micro impact extrusion
Schubert, Andreas; Jahn, Stephan F.; Müller, Benedikt | Conference Paper |
| 2012 | Innovative features in implants through beam melting
Müller, Bernhard; Töppel, Thomas; Gebauer, Mathias; Neugebauer, Reimund | Conference Paper |
| 2012 | Innovatives Design mit Hydroforming und Laserstrahlschmelzen
Müller, Bernhard; Töppel, Thomas; Höltje, Jörg | Presentation |
| 2012 | Laser beam melted tooling with added value enters sheet metal forming
Müller, Bernhard; Gebauer, Mathias; Neugebauer, Reimund | Presentation |
| 2012 | Laserstrahlschmelzen - Generative Fertigung von Werkzeugen für die Umformtechnik
Müller, Bernhard; Gebauer, Mathias; Rädel, Thomas | Journal Article |
| 2012 | Mining biomarker information in biomedical literature
Younesi, Erfan; Toldo, Luca; Müller, Bernd; Friedrich, Christoph M.; Novac, Natalia; Scheer, Alexander; Hofmann-Apitius, Martin; Fluck, Juliane | Journal Article |
| 2012 | New features and functions in implants through additive manufacturing technology and active materials
Rotsch, Christian; Müller, Bernhard; Töppel, Thomas; Böhm, Andrea; Bräunig, Jan; Drossel, Welf-Guntram | Conference Paper, Journal Article |
| 2012 | New features and functions in implants through an innovative design approach and additive manufacturing technology
Müller, Bernhard; Töppel, Thomas; Rotsch, Christian; Böhm, Andrea; Bräunig, Jan; Neugebauer, Reimund | Conference Paper |
| 2012 | Performance ratio revisited: Is PR > 90% realistic?
Reich, N.H.; Mueller, B.; Armbruster, A.; Sark, W.G.J.H.M. van; Kiefer, K.; Reise, C. | Journal Article, Conference Paper |
| 2012 | Review of PV performance ratio development
Sark, W.G.J.H.M. van; Reich, N.H.; Müller, B.; Armbruster, A.; Kiefer, K.; Reise, C. | Conference Paper |
| 2012 | Sieve element occlusion (SEO) genes encode structural phloem proteins involved in wound sealing of the phloem
Ernst, A.M.; Jekat, S.B.; Zielonka, S.; Müller, B.; Neumann, U.; Rüping, B.; Twyman, R.M.; Krzyzanek, V.; Prüfer, D.; Noll, G.A. | Journal Article |
| 2012 | Towards an affordable markerless acquisition of intangible contemporary dance choreographies at large-scaled stages
Kahn, Svenja; Keil, Jens; Zöllner, Michael; Müller, Benedikt | Conference Paper |
| 2012 | Umformende Mikrostrukturierung von Blechwerkstoffen für die Herstellung von Piezo-Metall-Modulen
Schubert, Andreas; Jahn, Stephan F.; Müller, Benedikt | Conference Paper |
| 2012 | Uncertainties of laboratory measurements for energy rating
Dirnberger, D.; Müller, B.; Kräling, U.; Dittmann, S. | Conference Paper |
| 2011 | Additive manufacturing boosts efficiency of heat transfer components
Neugebauer, Reimund; Müller, Bernhard; Gebauer, Mathias; Töppel, Thomas | Journal Article |
| 2011 | Characteristics of artificial forisomes from plants and yeast
Noll, G.A.; Müller, B.; Ernst, A.M.; Rüping, B.; Groscurth, S.; Twyman, R.M.; Kawchuk, L.M.; Prüfer, D. | Journal Article |
| 2011 | Fabrication and characterization of a form- and force-locked piezo-metal sensor module
Neugebauer, Reimund; Schubert, Andreas; Richter, Frank; Koriath, Hans-Joachim; Peter, Siegfried; Berg, Sania; Jahn, Stephan F.; Müller, Benedikt; Müller, Michael | Conference Paper |
| 2011 | Funktionsintegration in Umformwerkzeuge
Drossel, Welf-Guntram; Kräusel, Verena; Mainda, Patrick; Müller, Bernhard; Gebauer, Mathias | Conference Paper |
| 2011 | Generative Fertigungsverfahren - Innovationen bei der Herstellung komplizierter Werkzeuggeometrien für das Gesenkschmieden zur kurzfristigen Bereitstellung von geschmiedeten Prototypen
Wagner, A.; Bergmann, M.; Müller, B. | Journal Article |
| 2011 | Information retrieval framework for technology survey in biomedical and chemistry literature
Gurulingappa, Harsha; Müller, Bernd; Hofmann-Apitius, Martin; Fluck, Juliane | Conference Paper |
| 2011 | Innovative implant with inner functional channels and cavities
Neugebauer, Reimund; Müller, B.; Töppel, T. | Journal Article, Conference Paper |
| 2011 | Innovative Konstruktionsmöglichkeiten mit Hydroforming und Laserstrahlschmelzen
Müller, B.; Höltje, J. | Presentation |
| 2011 | Innovatives Implantat mit inneren Funktionskanälen und -hohlräumen
Neugebauer, Reimund; Müller, B.; Töppel, T. | Presentation |
| 2011 | MUGETO® - ein Implantat mit komplexen, funktionalen Kanälen und Hohlräumen
Töppel, Thomas; Müller, Bernhard; Gebauer, Mathias | Conference Paper |
| 2011 | Native and artificial forisomes: Functions and applications
Noll, G.A.; Müller, B.; Ernst, A.M.; Rüping, B.; Twyman, R.M.; Prüfer, D. | Journal Article |
| 2011 | Neue Funktionen in Endoprothesen durch generative Fertigung mit Strahlschmelzen
Töppel, T.; Gebauer, M.; Müller, B.; Neugebauer, Reimund | Conference Paper |
| 2011 | PLIO: An ontology for formal description of protein-ligand interactions
Ivchenko, O.; Younesi, E.; Shahid, M.; Wolf, A.; Müller, B.; Hofmann-Apitius, M. | Journal Article |
| 2011 | Ressourceneffiziente Werkzeugmaschinen- und Prozessgestaltung
Neugebauer, Reimund; Ihlenfeldt, Steffen; Wabner, Markus; Treppe, Frank; Kunze, Holger; Müller, Bernhard; Bucht, Andre; Hohlfeld, Jörg; Frieß, Uwe; Rentzsch, Hendrik | Conference Paper |
| 2011 | A semantic platform for information retrieval from e-health records
Gurulingappa, Harsha; Müller, Bernd; Hofmann-Apitius, Martin; Fluck, Juliane | Conference Paper |
| 2011 | The sieve element occlusion gene family in dicotyledonous plants
Ernst, A.M.; Rüping, B.; Jekat, S.B.; Nordzieke, S.; Reineke, A.R.; Müller, B.; Bornberg-Bauer, E.; Prüfer, D.; Noll, G.A. | Journal Article |
| 2011 | Study on the influence of the forming velocity in micro impact extrusion with modular dies
Schubert, Andreas; Jahn, Stephan; Müller, Benedikt; Hackert-Oschätzchen, Matthias | Conference Paper |
| 2010 | Abstracts versus full texts and patents: A quantitative analysis of biomedical entities
Müller, B.; Klinger, R.; Gurulingappa, H.; Mevissen, H.-T.; Hofmann-Apitius, M.; Fluck, J.; Friedrich, C.M. | Conference Paper |
| 2010 | Aktivierung mittels Niederdruckplasma zur Herstellung von Si-Verbunden im Niedertemperatur-Bereich und deren Charakterisierung mittels Mikro-Chevron-Test
Wünsch, D.; Müller, B.; Wiemer, M.; Mischke, H. | Conference Paper |
| 2010 | Aus der Fraunhofer-Forschung - Aktuelle Entwicklungen im Werkzeug- und Formenbau
Müller, B. | Conference Paper |
| 2010 | A degradation analysis of PV power plants
Kiefer, K.; Dirnberger, D.; Müller, B.; Heydenreich, W.; Kröger-Vodde, A. | Conference Paper |
| 2010 | Direct rapid tooling for die forging - a new challenge for layer-based technologies
Neugebauer, Reimund; Müller, B.; Wagner, A. | Conference Paper |
| 2010 | Direkte generative Fertigung von Schmiedegesenken eröffnet neue Möglichkeiten
Müller, B.; Neugebauer, Reimund | Conference Paper |
| 2010 | Direkte generative Fertigung von Schmiedegesenken eröffnet neue Möglichkeiten
Müller, B.; Neugebauer, Reimund | Journal Article |
| 2010 | Endoprothese, Verfahren zu deren Herstellung und Verwendung der Endoprothese
Müller, B.; Gebauer, M.; Töppel, T.; Böhm, A. | Patent |
| 2010 | In einer Woche zum Schmiedestück
Müller, B. | Journal Article |
| 2010 | Innovatives Design mit Hydroforming und Laserstrahlschmelzen
Müller, B.; Höltje, J. | Conference Paper |
| 2010 | Molecular and phylogenetic characterization of the sieve element occlusion gene family in Fabaceae and non-Fabaceae plants
Rüping, B.; Ernst, A.M.; Jekat, S.B.; Nordzieke, S.; Reineke, A.R.; Müller, B.; Bornberg-Bauer, E.; Prüfer, D.; Noll, G.A. | Journal Article |
| 2010 | Prior art search in chemistry patents based on semantic concepts and co-citation analysis
Gurulingappa, H.; Müller, B.; Klinger, R.; Mevissen, H.-T.; Hofmann-Apitius, M.; Friedrich, C.M.; Fluck, J. | Conference Paper |
| 2010 | Recombinant artificial forisomes provide ample quantities of smart biomaterials for use in technical devices
Müller, B.; Noll, G.A.; Ernst, A.M.; Rüping, B.; Groscurth, S.; Twyman, R.M.; Kawchuk, L.M.; Prüfer, D. | Journal Article |
| 2010 | Simulation of Irradiation and Temperature Efficiency of Thin Film and Crystalline Silicon Modules Based on Different Parametrization
Müller, B.; Kräling, U.; Heydenreich, W.; Reise, C.; Kiefer, K. | Conference Paper |
| 2009 | Generative Fertigungsverfahren - Möglichkeiten der Herstellung patientenspezifischer Implantate und medizintechnischer Komponenten
Müller, B. | Conference Paper |
| 2009 | Generieren von Leichtbaustrukturen mittels Laserstrahlschmelzen
Müller, B.; Töppel, T.; Gebauer, M. | Presentation |
| 2009 | More insights from the monitoring of real world PV power plants - a comparison of measured to predicted performance of PV systems
Müller, B.; Heydenreich, W.; Kiefer, K.; Reise, C. | Conference Paper |
| 2009 | Patent retrieval in chemistry based on semantically tagged named entities
Gurulingappa, H.; Müller, B.; Klinger, R.; Mevissen, H.-T.; Hofmann-Apitius, M.; Fluck, J.; Friedrich, C.M. | Conference Paper |
| 2009 | Visualization and analysis of extracted information from full text and patent corpora
Müller, B. | Master Thesis |
| 2008 | Fraunhofer-Institut für System- und Innovationsforschung. Jahresbericht 2007
: Müller, B.; Glutsch, U. | Annual Report |
| 2008 | Fraunhofer-Institute for Systems and Innovation Research. Annual Report 2007
: Müller, B.; Glutsch, U. | Annual Report |
| 2008 | Lotmaterial, enthaltend ein Metallstearat sowie Verwendung von Metallstearaten in Lotmaterialien
Diehm, R.; Ludeck, W.; Prihodovsky, A.; Schmitt, W.; Trageser, H.; Fix, A.; Hutter, M.; Pape, U.; Zerrer, P.; Meier, H.; Müller, B.; Wittreich, U.; Wormuth, D. | Patent |
| 2008 | Sensorarray zur Luftqualitätsmessung
Wöllenstein, J.; Bauersfeld, M.-L.; Rademacher, S.; Kovacs, A.; Kritwattanakhorn, J.; Müller, B.; Mescheder, U.; Peter, A. | Conference Paper |
| 2007 | Bindemittel, Verfahren zur Herstellung von Formaktivkohle und Formaktivkohle
Guderian, J.; Henkenjohann, M.; Mueller, B.R.; Goetze, T. | Patent |
| 2007 | Fraunhofer-Institut für System- und Innovationsforschung. Jahresbericht 2006
: Müller, B.; Glutsch, U. | Annual Report |
| 2007 | Fraunhofer-Institute for Systems and Innovation Research. Annual Report 2006
: Müller, B.; Glutsch, U. | Electronic Publication, Annual Report |
| 2007 | MEMS-based air quality sensor
Mescheder, U.; Bauersfeld, M.-L.; Kovacs, A.; Kritwattanakhorn, J.; Müller, B.; Peter, A.; Ament, C.; Rademacher, S.; Wöllenstein, J. | Conference Paper |
| 2007 | Modelbasierte Verfahren zur Bestimmung der Luftgüte
Peter, A.; Ament, C.; Bauersfeld, M.-L.; Rademacher, S.; Wöllenstein, J.; Kritwattanakhorn, J.; Kovacs, A.; Müller, B.; Mescheder, U. | Conference Paper |
| 2007 | Optimization of platinum adhesion in electrochemical etching process for multi-sensor systems
Kritwattanakhorn, J.; Kovacs, A.; Mescheder, U.; Müller, B.; Bauersfeld, M.-L.; Rademacher, S.; Wöllenstein, J. | Journal Article, Conference Paper |
| 2007 | Sensor system for air quality measurement
Kovacs, A.; Müller, B.; Kritwattanakhorn, J.; Mescheder, U.; Peter, A.; Ament, C.; Wöllenstein, J.; Bauersfeld, M.-L.; Rademacher, S. | Conference Paper |
| 2006 | Fraunhofer-Institut für System- und Innovationsforschung. Jahresbericht 2005
: Müller, B.; Glutsch, U. | Annual Report |
| 2006 | Fraunhofer-Institute for Systems and Innovation Research. Annual Report 2005
: Müller, B.; Glutsch, U. | Annual Report |
| 2006 | Mit Metallsalzen dotierte katalytisch aktive Formaktivkohlen und deren Verwendung
Goetze, T.; Polzin, S.; Müller, B.R. | Patent |
| 2006 | Optimization of platinum adhesion in electrochemical etching process for multi-sensor systems
Kritwattanakhorn, J.; Kovacs, A.; Mescheder, U.; Müller, B.; Bauersfeld, M.-L.; Rademacher, S.; Wöllenstein, J. | Conference Paper |
| 2006 | Untersuchungen zur Optimierung des Zusammenwirkens von Technologien zur dezentralen Energieerzeugung mit Brenngasen aus Erneuerbaren Energieträgern
Scholz, V.; Schmersahl, R.; Rössler, J.; Plogsties, V.; Weddig, J.; Morgenthal, I.; Meier Haack, J.; Vogel, C.; Rühling, K.; Müller, B.L. | Report |
| 2005 | Fraunhofer-Institut für Grenzflächen- und Bioverfahrenstechnik. Jahresbericht 2004
: Vorbeck, C.; Müller, B. | Annual Report |
| 2005 | Fraunhofer-Institut für System- und Innovationsforschung. Jahresbericht 2004
: Müller, B.; Glutsch, U. | Annual Report |
| 2005 | Fraunhofer-Institute for Systems and Innovation Research. Annual Report 2004
: Müller, B.; Glutsch, U. | Annual Report |
| 2005 | Sensorarray zur Luftqualitätsmessung
Ament, C.; Bauersfeld, M.-L.; Kovacs, A.; Kritwattanakhorn, J.; Mescheder, U.; Müller, B.; Peter, A.; Rademacher, S.; Wöllenstein, J. | Conference Paper |
| 2004 | Fraunhofer-Institut für Systemtechnik und Innovationsforschung. Jahresbericht 2003
: Müller, B.; Glutsch, U. | Annual Report |
| 2004 | Fraunhofer-Institute for Systems and Innovation Research. Annual Report 2003
: Müller, B.; Glutsch, U. | Annual Report |
| 2003 | Blick in die Zukunft. Ein Portrait des Fraunhofer-Instituts für Systemtechnik und Innovationsforschung
Meyer-Krahmer, F.; Müller, B. | Journal Article |
| 2003 | Endangered languages as a challenge for computational linguistics
Müller, B.S. | Book Article |
| 2003 | Female hominid immigrants may have avoided conflicts by new language capacities
Kilian, A.E.; Müller, B.S. | Conference Paper |
| 2003 | Fraunhofer-Institut für Systemtechnik und Innovationsforschung. Tätigkeitsbericht 2001/2002
: Müller, B.; Glutsch, U.; Samulat, G. | Annual Report |
| 2002 | The enigmatics of affect
Sengers, P.; Liesendahl, R.; Magar, W.; Seibert, C.; Müller, B.; Joachims, T.; Geng, W. | Conference Paper |
| 2002 | Ermittlung der Quellen für die prioritären Stoffe nach Artikel 16 der Wasserrahmenrichtlinie und Abschätzung ihrer Eintragsmengen in die Gewässer in Deutschland
Böhm, E.; Hillenbrand, T.; Marscheider-Weidemann, F.
: Müller, B.; Wiederhold, J.; Herrchen, M.; Klein, M. | Book |
| 2002 | Hydrophobe resorbierbare Polyester und deren Verwendung
Rafler, G.; Jobmann, M.; Mueller, B. | Patent |
| 2002 | Learning in unicellulars
DiPrimio, F.; Müller, B.S.; Kilian, A.E. | Conference Paper |
| 2002 | Life-like Learning in Technical Artefacts: Biochemical vs. Neural Mechanisms
Kilian, A.E.; Müller, B.S. | Conference Paper |
| 2001 | Combining functional and parametric tests for the example of a digital to analog converter
Wegener, C.; Kennedy, M.-P.; Müller, B.; Straube, B. | Conference Paper |
| 2001 | Contributions of minimal cognition to flexibility
Müller, B.S.; DiPrimio, F.; Lengeler, J.W. | Conference Paper |
| 2001 | DAE-index increase in analogue fault simulation
Straube, B.; Reinschke, K.; Vermeiren, W.; Röbenack, K.; Müller, B.; Clauß, C. | Conference Paper |
| 2001 | Fraunhofer-Institut für Systemtechnik und Innovationsforschung. Tätigkeitsbericht 1999/2000
: Müller, B.; Glutsch, U. | Annual Report |
| 2001 | netzspannung.org : an internet media lab for knowledge discovery in mixed realities
Fleischmann, M.; Strauss, W.; Novak, J.; Paal, S.; Müller, B.; Blome, G.; Peranovic, P.; Seibert, C.; Schneider, M. | Conference Paper |
| 2000 | Analogue fault simulation by aFSIM
Straube, B.; Müller, B.; Vermeiren, W.; Hoffmann, C.; Sattler, S. | Conference Paper |
| 2000 | Biomimetic autonomous factories. Autonomous manufacturing systems and systems software
Bozinovski, S.; Müller, B.S.; DiPrimio, F. | Study |
| 2000 | Minimal cognition in unicellular organisms
DiPrimio, F.; Müller, B.S.; Lengeler, J.W. | Conference Paper |
| 2000 | Neubewertung kognitiver Leistungen im Lichte der Fähigkeiten einzelliger Lebewesen
Lengeler, J.W.; Müller, B.S.; DiPrimio, F. | Journal Article |
| 2000 | Remarks on Concept Processing for Cognitive Robotics
Müller, B.S. | Journal Article |
| 1999 | Automatic generation of efficient fault lists for the defect-oriented design and test of analogue circuits
Straube, B.; Müller, B.; Hoffmann, C.; Sattler, S.; Schmid, H. | Conference Paper |
| 1999 | The increase of the index of network equations due to fault injection
Straube, B.; Vermeiren, W.; Müller, B.; Clauß, C.; Reinschke, K.; Röbenack, K. | Conference Paper |
| 1999 | Kognitive Leistungen und einzellige Lebewesen
Lengeler, J.W.; Müller, B.S.; DiPrimio, F. | Study |
| 1999 | Minimum conditions for embodied cognition
Lengeler, J.W.; Müller, B.S.; DiPrimio, F. | Conference Paper |
| 1999 | On the fault-injection-caused increase of the DAE-index in analogue fault simulation
Straube, B.; Reinschke, K.; Vermeiren, W.; Röbenack, K.; Müller, B.; Clauß, C. | Conference Paper |
| 1998 | Identifikation elementarer kognitiver Leistungen
Müller, B.S. | Study |
| 1997 | Konzeptbildung und Kommunikation bei Robotern
Müller, B.S. | Book |
| 1996 | BMBF-Machbarkeitsuntersuchung LAOKOON
Berns, K.; Cordes, S.; Grimm, H.-J.; DiPrimio, F.; Eberl, M.; Hertzberg, J.; Ilg, W.; Kemman, M.; Kirchner, F.; Lagermann, B.; Licht, U.; Müller, B.S.; Prchal, P.; Rome, E.; Stapelfeld, H.; Suna, R. | Report |
| 1996 | Explanation abilities
Müller, B.S.; Sprenger, M. | Book Article |
| 1994 | Anlage zur Behandlung von Objekten unter Reinluftraum- Bedingungen
Pokorny, W.; Mordau, R.; Mueller, B.; Bartz, L. | Patent |
| 1994 | Fertigungsoptimierung - Reduzierung von schmutzbedingter Nacharbeit und Feldausfällen
Müller, B. | Conference Paper |
| 1994 | The impact of models and communication on the problem solving abilities of systems of artificial agents
Müller, B.S.; DiPrimio, F. | Conference Paper |
| 1994 | IPA-Workshop - "Fertigungstechnik im Reinraum - Meßtechnisches Praktikum"
Dorner, J.; Huppert, U.; Müller, B. | Conference Paper |
| 1994 | Kleine Teilchen - Großes Optimierungspotential
Müller, B. | Journal Article |
| 1994 | Optimierung Reiner Fertigungen unter Gesichtspunkten minimalster Betriebskosten bei maximaler Reinheit
Klumpp, B.; Müller, B. | Conference Paper |
| 1994 | Problem solving abilities of systems of artificial agents
DiPrimio, F.; Müller, B.S. | Book |
| 1994 | Problem solving abilities of systems of artificial agents
Müller, B.S.; DiPrimio, F. | Conference Paper |
| 1994 | Produktion im reinen Umfeld - Branchen, Beispiele, Trends
Müller, B. | Conference Paper |
| 1994 | Research prospects on cognition and behavior
DiPrimio, F.; Müller, B.S. | Book |
| 1994 | Sand im Getriebe - Reduzierung von schmutzbedingter Nacharbeit und Feldausfällen durch systematische Fertigungsoptimierung. Tl.1
Schraft, R.D.; Dorner, J.; Müller, B. | Journal Article |
| 1993 | Fertigungsoptimierung
Müller, B. | Conference Paper |
| 1993 | Saubermänner - Konzeption und Entwicklung von hochautomatisierten Geräten für Reinraumfertigungen
Müller, B. | Book Article |
| 1992 | BABYLON for the knowledge engineer
Börding, J.; Brewka, G.; Christaller, T.; Groß, E.; Güsgen, H.-W.; Kohl, A.; Müller, B.S.; Voß, A. | Book Article |
| 1992 | Explanation facilities for model-based expert systems
: Becker, A.; Müller, B.S.; Sprenger, M. | Conference Proceedings |
| 1992 | Literarische Rhetorik und Text-Generierung
Müller, B.S. | Report |
| 1992 | Partikelmeßtechnik auf dem Prüfstand
Ernst, C.; Grimme, R.; Kahlden, T. von; Müller, B. | Journal Article |
| 1992 | Present applications
Christaller, T.; Müller, B.S.; Voß, A. | Book Article |
| 1991 | Degrees of cannedness
Müller, B.S. | Report |
| 1991 | Dialogabhängige Erklärungsstrategien für modellbasierte Expertensysteme
Müller, B.S.; Sprenger, M. | Report |
| 1991 | Dialogabhängige Erklärungsstrategien für modellbasierte Expertensysteme
Müller, B.S.; Sprenger, M. | Report |
| 1991 | Partikelmessungen in Gasen
Dorner, J.; Müller, B. | Conference Paper |
| 1991 | Sprechende Namen, unbenannte Relationen, unerklärbare Bodies
Müller, B.S.; Becker, A. | Report |
| 1990 | Flexibel Medien ver- und entsorgen
Warnecke, H.-J.; Müller, B.; Dorner, J.; Frühauf, W.; Mann, R. | Journal Article |
| 1990 | Flexible Medienversorgung und -entsorgung. Für fotolithographisches Prozeßzentrum neuartiges Konzept realisiert
Warnecke, H.-J.; Dorner, J.; Frühauf, W.; Mann, R.; Müller, B. | Journal Article |
| 1989 | Anwendungen
Christaller, T.; Müller, B.S.; Voß, A. | Book Article |
| 1989 | Automatische Sprachsynthese
Müller, B.S. | Book Article |
| 1988 | BABYLON für den Wissensingenieur
Börding, J.; Güsgen, H.-W.; Müller, B.S.; Voß, A. | Book |
| 1988 | BABYLON für den Wissensingenieur
Börding, J.; Brewka, G.; Güsgen, H.-W.; Groß, E.; Kohl, A.; Müller, B.S.; Voß, A.; Walther, J. | Book |
| 1988 | Spezifikation und Konstruktion von BABYLON
Christaller, T.; Groß, E.; Güsgen, H.-W.; Müller, B.S.; Rome, E.; Walther, J. | Book |
| 1988 | Über die Umsetzung der X-Wissensbasis ExTra in die BABYLON-Wissensbasis ExTraGMD
Müller, B.S.; Börding, J.; Holstein, M. | Book |
| 1987 | Modell-Erklärungskomponente
Müller, B.S.; Voß, A. | Book |
| 1987 | Transportoptimiertes Design - Transportgerechte Produktgestaltung im Hinblick auf die Distribution
Müller, B.; Ziegahn, K.-F. | Journal Article |
| 1987 | Über ein Experiment zur Umsetzung einer BABYLON-Wissensbasis in das KADS-Modell
Voß, A.; Müller, B.S.; Walther, J. | Conference Paper |
| 1986 | Lehrmaterialien BABYLON. Die Beispielwissensbasen zur Pilzbestimmung
Müller, B.S. | Report |
| 1986 | Softwareentwurf und Realisierung des Expertensystemwerkzeugs BABLON mit Hilfe objektorientierter Programmierung
Groß, E.; Walther, J.; Christaller, T.; Rome, E.; Müller, B.S. | Conference Paper |
| 1985 | Materialien zu einigen Werkzeugsystemen zur Erstellung von Expertensystemen
: Brewka, G. (Hrsg.); DiPrimio, F. (Hrsg.); Müller, B.S. (Hrsg.) | Book |
| 1985 | OPS5
Henne, P.; Müller, B.S. | Book Article |
| 1982 | Akustische Komponenten in Bürokommunikationssystemen
Müller, B.; Kansy, K.; Busch, M. | Book Article |