| | |
---|
2021 | Methodic development of laser micro structured cutting tools with microscale textures for AW7075 aluminum alloy using a Plackett–Burman screening design Esch, Philipp; Klocke, Fritz; Bauernhansl, Thomas; Schneider, Marco | Journal Article |
2019 | CFK Complete. Projekt-Abschlussbericht Gringel, Martin; Heußer, Thomas; Esch, Philipp; Wawak, Andreas; Frommknecht, Andreas; Kirschner, Thomas : Klocke, Fritz (Hrsg.); Bauernhansl, Thomas (Hrsg.); Schneider, Marco (Fachl. Leitung) | Report |
2019 | Digitalisierung im Branchenfokus Stahl- und Metallhandel Schumpp, Florian; Birenbaum, Christoph; Schneider, Marco : Klocke, Fritz (Hrsg.); Bauernhansl, Thomas (Hrsg.) | Study |
2019 | Increasing resource efficiency with an engineering decision support system for comparison of product design variants Buchert, Tom; Ko, Nathanael; Graf, Roberta; Vollmer, Thomas; Alkhayat, Moritz; Brandenburg, Elisabeth; Stark, Rainer; Klocke, Fritz; Leistner, Philip; Schleifenbaum, Johannes Henrich | Journal Article |
2018 | Analysis of form deviation in non-isothermal glass molding Kreilkamp, Holger; Grunwald, Tim; Dambon, Olaf; Klocke, Fritz | Conference Paper |
2018 | Automated polarization control for the precise alignment of laser-induced self-organized nanostructures Hermens, Ulrike; Pothen, Mario; Winands, Kai; Arntz, Kristian; Klocke, Fritz | Journal Article |
2018 | A characterization of quality of sheared edge in fine blanking using edge-computing approach Trauth, Daniel; Stanke, Joachim; Feuerhack, Andreas; Bergs, Thomas; Mattfeld, Patrick; Klocke, Fritz | Journal Article, Conference Paper |
2018 | Design framework for model-based self-optimizing manufacturing systems Thombansen, Ulrich; Buchholz, Guido; Frank, Daniel; Heinisch, Julian; Kemper, Maximilian; Pullen, Thomas; Reimer, Viktor; Rotshteyn, Grigory; Schwenzer, Max; Stemmler, Sebastian; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Klocke, Fritz; Poprawe, Reinhart; Reisgen, Uwe; Schmitt, Robert | Journal Article |
2018 | Finishbearbeitung technischer Oberflächen aus gehärtetem Stahl unter Verwendung von Rundbürsten mit Schleiffilamenten Hochschild, Leif : Kraft, Marc; Uhlmann, Eckart; Klocke, Fritz | Dissertation |
2018 | Numerical-experimental investigation of load paths in DP800 dual phase steel during Nakajima test Bergs, Thomas; Nick, Matthias; Feuerhack, Andreas; Trauth, Daniel; Klocke, Fritz | Conference Paper |
2018 | Precision glass molding of fused silica optics Friedrichs, Marcel; Dambon, Olaf; Pongs, Guido; Zhang, Lin; Yi, Allen Y.; Klocke, Fritz | Conference Paper |
2018 | Study for Combined Wire + Powder Laser Metal Deposition of H11 and Niobium Teli, Mahesh; Klocke, Fritz; Arntz, Kristian; Winands, Kai; Schulz, Martin; Oliari, Stella | Journal Article, Conference Paper |
2018 | Surface integrity in ultra-precision grinding of transparent ceramics Klocke, Fritz; Dambon, Olaf; Bletek, Thomas; Höche, Thomas; Naumann, Falk; Hutzler, Thomas | Journal Article, Conference Paper |
2018 | Target-oriented analysis of resource consumption in manufacturing process chains Demmer, Axel; Klingbeil, Nils; Klocke, Fritz; Putz, Matthias; Schmitt, Robert; Vollmer, Thomas | Journal Article, Conference Paper |
2017 | Analysis of the application of poly-nanocrystalline diamond tools for ultra precision machining of steel with ultrasonic assistance Doetz, Marius; Dambon, Olaf; Klocke, Fritz; Bulla, Benjamin; Schottka, Karl; Robertson, David J. | Conference Paper |
2017 | Assistenzsysteme in der Produktionstechnik Klocke, Fritz; Bassett, E.; Bönsch, C.; Gärtner, R.; Holsten, S.; Jamal, R.; Jurke, B.; Kamps, S.; Kerzel, U.; Mattfeld, P.; Shirobokov, A.; Stauder, J.; Stautner, M.; Trauth, D. | Conference Paper |
2017 | Atomic diffusion induced degradation in bimetallic layer coated cemented tungsten carbide Peng, Zirong; Rohwerder, Michael; Choi, Pyuck-Pa; Gault, Baptiste; Meiners, Thorsten; Friedrichs, Marcel; Kreilkamp, Holger; Klocke, Fritz; Raabe, Dierk | Journal Article |
2017 | Bewertung von Multitechnologieplattformen Rey, Jan; Bois-Reymond, Frédéric du; Schmid, Alexander; Trauth, Daniel; Mattfeld, Patrick; Klocke, Fritz; Brecher, Christian | Journal Article |
2017 | Clarification of gap phenomena in precise electrochemical machining by implementing a "virtual sensor" Klocke, Fritz; Heidemanns, Lukas; Zeis, Markus; Kling, Andreas | Conference Paper |
2017 | Compensation of scanner based inertia for laser structuring processes Pothen, Mario; Winands, Kai; Klocke, Fritz | Journal Article |
2017 | Degradation Mechanism of Molds for Precision Glass Molding Peng, Zirong; Rohwerder, Michael; Friedrichs, Marcel; Choi, Pyuck-Pa; Gault, Baptiste; Meiners, Thorsten; Kreilkamp, Holger; Klocke, Fritz; Raabe, Dierk | Journal Article, Conference Paper |
2017 | E³-Produktion. Innovationen für die Produktion der Zukunft : Neugebauer, Reimund; Putz, Matthias; Klocke, Fritz | Book |
2017 | Engineering valley - Internet of production auf dem RWTH Aachen Campus : Schuh, Günther; Brecher, Christian; Klocke, Fritz; Schmitt, Robert | Book |
2017 | Evaluation of efficiency and mechanical properties of Inconel 718 components built by wire and powder laser material deposition Arrizubieta, J.I.; Klocke, Fritz; Klingbeil, Nils; Arntz, Kristian; Lamikiz, A.; Martinez, S. | Journal Article |
2017 | Evaluation of the relevance of melt pool dynamics in Laser Material Deposition process modeling Arrizubieta, Jon Iñaki; Lamikiz, Aitzol; Klocke, Fritz; Martínez, Silvia; Arntz, Kristian; Ukar, Eneko | Journal Article |
2017 | Glass material modeling and its molding behavior Liu, Gang; Vu, Anh Tuan; Dambon, Olaf; Klocke, Fritz | Journal Article |
2017 | Integrative Werkstoff- und Prozesssimulation Klocke, Fritz; Münstermann, S.; Schröder, K.-U.; Apel, M.; Binder, M.; Butz, A.; Döbbeler, B.; Fischersworring-Bunk, A.; Prahl, U.; Ruess, M. | Conference Paper |
2017 | Internet of Production für agile Unternehmen. AWK Aachener Werkzeugmaschinen-Kolloquium 2017 : Brecher, Christian; Klocke, Fritz; Schmitt, Robert; Schuh, Günther | Conference Proceedings |
2017 | Laser hardening of thin walled parts with cryogenic cooling Klocke, Fritz; Gräfe, Stefan; Schulz, Martin; Zheng, Gaoyuan | Conference Paper |
2017 | Maximale Wertschöpfung bei minimalem Ressourceneinsatz Putz, Matthias; Klocke, Fritz | Book Article |
2017 | Modeling and simulation of the fluid flow in wire electrochemical machining with rotating tool (wire ECM) Klocke, Fritz; Herrig, Tim; Zeis, Markus; Klink, Andreas | Conference Paper |
2017 | Optimization of the laser hardening process by adapting the intensity distribution to generate a top-hat temperature distribution using freeform optics Klocke, Fritz; Schulz, Martin; Gräfe, Stefan | Journal Article |
2017 | Prognosefähigkeit für Prozessketten Klocke, Fritz; Arntz, Kristian; Dröscher, Tim; Gorgels, Christof; Heuer, Volker; Johann, Herbert; Kappmeyer, Gregor; Krömer, Markus; Löpenhaus, Christoph; Schug, Pascal; Welling, David | Conference Paper |
2017 | Protective coatings for chalcogenide glass molding Friedrichs, Marcel; Staasmeyer, Jan-Helge; Dambon, Olaf; Klocke, Fritz | Conference Paper |
2017 | Self-optimizing production technologies Klocke, Fritz; Abel, Dirk; Gries, Thomas; Hopmann, Christian; Loosen, Peter; Poprawe, Reinhart; Reisgen, Uwe; Schmitt, Robert; Schulz, Wolfgang; Abels, Peter; Adams, Oliver; Auerbach, Thomas; Buchholz, Guido; Döbbeler, Benjamin; Frank, Daniel; Heinisch, Julian; Hermanns, Torsten; Gloy, Yves-Simon; Keitzel, Gunnar; Kemper, Maximilian; Martel, Diana Suarez; Reimer, Viktor; Reiter, Matthias; Saggiomo, Marco; Schwenzer, Max; Stemmler, Sebastian; Stoyanov, Stoyan; Thombansen, Ulrich; Veselovac, Drazen; Willms, Konrad | Book Article |
2017 | SimQRi - Simualtive Quantifizierung der Risikofolgen und der internen Maßnahmewirkungen in komplexen Beschaffungsketten zur externen Risikobehandlung Jeschke, Sabina; Vossen, René; Klocke, Fritz; Hubaux, Damien | Report |
2017 | State-of-the-art laser additive manufacturing for hot-work tool steels Klocke, Fritz; Arntz, Kristian; Teli, Mahesh; Winands, Kai; Wegener, Maximilian; Oliari, Stella | Journal Article, Conference Paper |
2017 | Ultra-precision grinding of polycrystalline transparent ceramics Bletek, Thomas; Dambon, Olaf; Klocke, Fritz | Conference Paper |
2017 | Vernetzte, adaptive Produktion Klocke, Fritz; Bergs, Thomas; Bobek, Thomas; Huwer, Tobias; Liu, Gang; Pothen, Mario; Staasmeyer, Jan-Helge; Winands, Kai | Conference Paper |
2017 | Wire-based laser metal deposition for additive manufacturing of TiAl6V4: Basic investigations of microstructure and mechanical properties from build-up parts Klocke, Fritz; Arntz, Kristian; Klingbeil, Nils; Schulz, Martin | Conference Paper |
2016 | Alles in die richtige Form Klocke, Fritz; Wollbrink, Moritz | Journal Article |
2016 | Correlation between the wear behavior of coated cemented carbide tools and coatings properties assessed by nano-indentations, nanoand micro-impact tests Bouzakis, Konstantinos-Dionysios; Charalampous, Panagiotis; Bouzakis, Emmanouil; Kotsanis, Tilemachos; Skordaris, Georios; Michailidis, Nikolaos; Klocke, Fritz; Bergs, Thomas; Ottersbach, Michael; Busch, Marc | Conference Paper |
2016 | Cryogenic manufacturing processes Jawahir, I.S.; Attia, H.; Biermann, Dirk; Duflou, Joost R.; Klocke, Fritz; Meyer, D.; Newman, S.T.; Pusavec, F.; Putz, Matthias; Rech, J.; Schulze, V.; Umbrello, D. | Journal Article, Conference Paper |
2016 | E³-Produktion. Ultrakurze Prozessketten bewerten und verbessern Klocke, Fritz; Vollmer, Thomas; Klingbeil, Nils; Wegener, Maximilian; Alkhayat, Moritz; Lahl, Mike; Kluth, Andreas | Journal Article |
2016 | A hybrid optimization approach in non-isothermal glass molding Vu, Anh-Tuan; Kreilkamp, Holger; Krishnamoorthi, Bharathwaj Janaki; Dambon, Olaf; Klocke, Fritz | Conference Paper |
2016 | Influence of the interlayer material selection for PtIr-coatings on the degradation mechanisms for use in Precision Glass Molding Friedrichs, Marcel; Dambon, Olaf; Bernhardt, Frank; Dong, Zhen; Klocke, Fritz | Conference Paper |
2016 | Model of coating wear degradation in precision glass molding Klocke, Fritz; Dambon, Olaf; Rohwerder, Michael; Bernhardt, Frank; Friedrichs, Marcel; Merzlikin, Sergly V. | Journal Article |
2016 | Selection of competitive manufacturing resources in tooling based on manufacturing concepts Klocke, Fritz; Arntz, Kristian; Heeschen, Dominik; Johannsen, Lars; Prümmer, Marcel | Conference Paper |
2016 | Target-oriented analysis of resource consumptions for production planning Vollmer, Thomas; Klingbeil, Nils; Wegener, Max; Permin, Eike; Arntz, Kristian; Klocke, Fritz; Schmitt, Robert H. | Abstract |
2016 | Technological and simulative analysis of power skiving Klocke, Fritz; Brecher, Christian; Löpenhaus, Christoph; Ganser, Philipp; Staudt, Julian; Krömer, Markus | Journal Article, Conference Paper |
2016 | Tribological wear analysis and numerical lifetime prediction of glassy carbon tools in fused silica molding Dukwen, Julia; Friedrichs, Marcel; Liu, Gang; Tang, Minjie; Dambon, Olaf; Klocke, Fritz | Journal Article |
2016 | Warmumformung von Präzisionsoptiken Grunwald, Tim; Dambon, Olaf; Klocke, Fritz | Book Article |
2015 | Analytical modelling methods for temperature fields in metal cutting based on panel method of fluid mechancis Klocke, Fritz; Brockmann, Matthias; Gierlings, Sascha; Veselovac, Drazen; Roidl, Benedikt; Schmidt, Gerhard; Semmler, Ulrich; Kever, D. | Journal Article, Conference Paper |
2015 | Automation concepts for tool and die making companies Klocke, Fritz; Arntz, Kristian; Johannsen, Lars | Conference Paper |
2015 | Dressing of grinding wheels for ultra precision grinding of diffractive structures in tungsten carbide molds Bletek, Thomas; Klocke, Fritz; Hünten, Martin; Dambon, Olaf | Conference Paper |
2015 | Influence of coolant on ductile mode processing of binderless nanocrystalline tungsten carbide through ultraprecision diamond turning Doetz, Marius; Dambon, Olaf; Klocke, Fritz; Fähnle, Oliver | Conference Paper |
2015 | Numerical modeling-based design of the newly developed nonisothermal glass molding process for complex glass optics Vu, Anh Tuan; Kreilkamp, Holger; Liu, Gang; Dambon, Olaf; Klocke, Fritz | Conference Paper |
2015 | Properties of steel-aluminum joints generated by combining continuous and pulsed laser radiation Frank, Sascha; Arntz, Kristian; Klocke, Fritz | Conference Paper |
2015 | Technological and economical assessment of alternative process chains for blisk manufacture Klocke, Fritz; Schmitt, Robert; Zeis, Markus; Heidemanns, Lukas; Kerkhoff, Johannes; Heinen, Daniel; Klink, Andreas | Journal Article, Conference Paper |
2015 | Thermal simulation of laser-assisted turning Arrizubieta, Jon Inaki; Klocke, Fritz; Gräfe, Stefan; Arntz, Kristian; Lamikiz, Aitzol | Journal Article, Conference Paper |
2015 | Untersuchung des Einflusses von Dreh-, Drehfräs-, Glattwalz- sowie Schleifprozessen auf das tribologische Einsatzverhalten von Stahl am Beispiel des Rad-Schiene-Kontakts Gebhard, Stefan : Stark, Rainer; Uhlmann, Eckart; Klocke, Fritz | Dissertation |
2014 | Characterization of a HVOF-sprayed WC-CoCr coating before and after laser-assisted turning Bobzin, K.; Zhao, L.; Öte, M.; Linke, T.; Klocke, Fritz; Brummer, Christoph; Gräfe, Stefan | Conference Paper |
2014 | Coating wear characteristic in heating tests under process conditions of Precision Glass Molding Klocke, Fritz; Dambon, Olaf; Rohwerder, M.; Bernhardt, Frank; Merzlikin, S. | Presentation |
2014 | Comparison of rotational turning and hard turning regarding surface generation Degen, Florian; Klocke, Fritz; Bergs, Thomas; Ganser, Philipp | Journal Article |
2014 | Effizienzsteigerung bei der PKD-Bearbeitung Brecher, Christian; Klocke, Fritz; Mattfeld, Patrick; Schindler, Florestan; Emonts, Michael; Janssen, Andreas; Hermani, Jan-Patrick; Storms, Thomas | Journal Article |
2014 | Evaluationsassistenz für die NC-Bearbeitungsplanung komplexer Fräsprozesse Lohse, Wolfram : Brecher, Christian; Klocke, Fritz; Schmitt, Robert; Schuh, Günther | Dissertation |
2014 | Handbuch Spanen. 2., vollst. neu bearb. Aufl. : Spur, Günter (Hrsg.); Heisel, Uwe (Hrsg.); Klocke, Fritz (Hrsg.); Uhlmann, Eckart (Hrsg.) | Book |
2014 | Hochleistungszerspanung von bleifreien Kupferwerkstoffen Klocke, Fritz; Lung, D.; Nobel, C. | Journal Article |
2014 | Laser-based biomimetic functionalization of surfaces: From moisture harvesting lizards to specific fluid transport systems Commans, P.; Winands, Kai; Arntz, Kristian; Klocke, Fritz; Baumgartner, W. | Journal Article |
2014 | Local simulation of the specific material removal rate for generating gear grinding Brecher, Christian; Klocke, Fritz; Brumm, Markus; Hübner, F. | Conference Paper |
2014 | Modellierung und Evaluation von CAx-Prozessketten Schug, Pascal; Glasmacher, Lothar; Klocke, Fritz | Conference Paper |
2014 | Optimized density profiles for powder metallurgical gears Gräser, E.; Hajeck, M.; Bezold, A.; Broeckmann, C.; Brumm, Markus; Klocke, Fritz | Journal Article |
2014 | Presentation of a Novel "Simultaneous Three Axis Turning" Process Degen, Florian; Klocke, Fritz; Bergs, Thomas | Conference Paper |
2014 | Process Chains for CAM Supported Additive Manufacturing by Laser Deposition Welding Klocke, Fritz; Wegener, Maximilian; Liu, Y.; Arntz, Kristian | Conference Paper |
2014 | Process model for honing larger gears Klocke, Fritz; Brumm, Markus; Kampka, M. | Conference Paper |
2014 | Produktivitätssteigerung in der Verzahnungsfertigung durch Fertigwälzfräsen Klocke, Fritz; Brumm, Markus; Sari, D. | Conference Paper |
2014 | Quality and surface of gears manufactured by free form milling with standard tools Klocke, Fritz; Brumm, Michael; Staudt, J. | Conference Paper |
2014 | Ressourceneffiziente Produktion Klocke, Fritz; Putz, Matthias; Binder, M.; Döbbeler, B.; Jahns, Peter; Kleinjans, Manfred; Lung, D.; Stalmann, Albrecht; Werner, Axel | Conference Paper |
2014 | Sensoren für die digitale Produktion Klocke, Fritz; Joseph, Y.; Trächtler, Ansgar; Adams, O.; Backmeyer, M.; Blattner, M.; Brockmann, M.; Eisenblätter, G.; Gierlings, S.; Henke, C.; Jamal, R.; Kamps, S.; Keitzel, G.; Schulz, Katharina; Veselovac, D.; Wirtz, G. | Conference Paper |
2014 | Technological potential and performance of gears ground by dressable CBN tools Reimann, J.; Klocke, Fritz; Brumm, Markus; Mehr, A.; Finkenwirth, K. | Journal Article |
2014 | Wear protection of deep drawing tools by systematic optimization of highly stressed surfaces Klocke, Fritz; Heinen, Daniel; Schongen, F.; Arntz, Kristian; Liu, Y.; Bäcker, V.; Feldhaus, B. | Conference Paper |
2013 | Auf dem Weg in eine neue Produktionstechnik Klocke, Fritz | Journal Article |
2013 | Efficient machining of ultra precise steel moulds with freeform surfaces Bulla, Benjamin; Robertson, D.J.; Dambon, Olaf; Klocke, Fritz | Conference Paper |
2013 | Finishing of polycrystalline diamond tools by combining laser ablation with grinding Brecher, Christian; Klocke, Fritz; Schindler, Florestan; Janssen, Andreas; Fischer, Bettina; Hermani, Jan-Patrick | Journal Article |
2013 | Grundlagenprüfstand für Spanungsprozesse mit bestimmter Schneide Brockmann, Matthias; Klocke, Fritz; Semmler, Ulrich; Schmidt, Gerhard | Conference Paper |
2011 | Analysis of defect mechanisms in polishing of tool steels Klocke, Fritz; Dambon, Olaf; Behrens, Barbara | Journal Article |
2011 | Characterization of tool wear in high-speed milling of hardened powder metallurgical steels Klocke, Fritz; Arntz, Kristian; Cabral, Gustavo Francisco; Stolorz, Martin; Busch, Marc | Journal Article |
2011 | Integrative Simulation von Werkzeugmaschine und Fertigungstechnologie Brecher, Christian; Klocke, Fritz; Lohse, Wolfram; Cabral, Gustavo Francisco; Rasim, Matthias; Triebs, Johannes; Minoufekr, Meysam; Bäumler, Stephan; Bergs, Thomas; Herfs, Werner; Glasmacher, Lothar; Wegner, Hagen | Book Article |
2011 | IR-based temperature measurement in rotational grinding of sapphire wafers Klocke, Fritz; Kuljanic, Elso; Dambon, Olaf; Sortino, M.; Herben, Maurice; Totis, G. | Conference Paper |
2011 | Verkürzung von Prozessketten durch Verfahrensintegration in Werkzeugmaschinen Brecher, Christian; Bäumler, Stephan; Breitbach, Tobias; Do-Khac, Dennis; Herfs, Werner; Karlberger, Andreas; Klocke, Fritz; Arntz, Kristian; Heinen, Daniel; Emonts, Michael; Hermani, Jan-Patrick; Janssen, Andreas | Book Article |
2011 | Verschleißreduktion von Werkzeugen durch gezielte Geometrie- und Aktivflächenoptimierung Klocke, Fritz; Heinen, Daniel; Arntz, Kristian; Bäcker, Vladimir; Schongen, Fabian; Feldhaus, Björn | Conference Paper |
2010 | Integrated Process Chain for Glass Moulding of Freeform Surfaces Klocke, Fritz; Dambon, Olaf; Hollstegge, Daniel; Bresseler, Bernd | Conference Paper |
2010 | Polieren - immer noch ein Handwerk? Klocke, Fritz; Behrens, Barbara | Conference Paper |
2010 | Process and Mould Design Optimization for Precision Glass Moulding via a Flexible and Reliable Numerical Simulation Klocke, Fritz; Dambon, Olaf; Hollstegge, Daniel; Yi, Allen Y.; Wang, Fei | Conference Paper |
2010 | Wafer level manufacturing of glass optics Hollstegge, Daniel; Hünten, Martin; Dambon, Olaf; Klocke, Fritz | Conference Paper |
2009 | Process influence of shrinkage in precision glass moulding Klocke, Fritz; Dambon, Olaf; Hollstegge, Daniel; Hünten, Martin; Wang, Fei | Conference Paper |
2008 | Energieeffizienz in der Produktion : Neugebauer, Reimund; Westkämper, Engelbert; Klocke, Fritz; Spath, Dieter; Schenk, Michael; Michaelis, Alexander; Ten Hompel, Michael; Weidner, Eckhard | Report |
2008 | Schleifen im Nanometerbereich Klocke, Fritz; Dambon, Olaf; Hünten, Martin | Journal Article |
2007 | Wirkmechanismen beim Polieren von Keramik Klocke, Fritz; Zunke, Richard; Dambon, Olaf | Journal Article |
2005 | As tecnologias com mais chances de predominar na produção de moldes e matrizes Klocke, Fritz; Arntz, Kristian | Journal Article |
2005 | Neue Technologien beschleunigen die Produktentwicklung in der Mikrofluidik Klocke, Fritz; Bodenhausen, Jörgen von | Journal Article |
2005 | Removal mechanisms in fine polishing calcium fluoride and silicon Klocke, Fritz; Dambon, Olaf; Schneider, Udo | Journal Article |
2005 | Untersuchungen zum Lasersintern keramischer Werkstoffe für Feingussanwendungen Klocke, Fritz; Derichs, Christian; Ader, Christoph; Demmer, Axel | Conference Paper |