Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2015Performance increase of hardmetal cutting tools based on stress-strain strain rate properties of their film
Bouzakis, K.D.; Charalampous, P.; Paraskevopoulou, R.; Skordaris, G.; Bouzakis, E.; Kombogiannis, S.; Katirtzoglou, G.; Makrimallakis, S.
Journal Article
2014High performance up and down milling stainless steel considering coated tools' dynamic loads
Bouzakis, K.D.; Makrimallakis, S.; Skordaris, G.; Bouzakis, E.; Kombogiannis, S.; Katirtzoglou, G.; Maliaris, G.
Conference Paper
2013Coated tools wear prediction in milling explained by the strain rate affected film fatigue failure
Bouzakis, K.-D.; Paraskevopoulou, R.; Makrimallakis, S.; Katirtzoglou, G.; Bouzakis, E.; Efstathiou, K.
Journal Article
2013Coated tools wear prediction in milling explained by the strain rate affected film fatigue failure
Bouzakis, K.D.; Paraskevopoulou, R.; Makrimallakis, S.; Katirtzoglou, G.; Bozakis, E.; Efstathiou, K.
Conference Paper
2013Coated tools' performance in up and down milling stainless steel, explained by film mechanical and fatigue properties
Bouzakis, K.D.; Makrimallakis, S.; Skordaris, G.; Bouzakis, E.; Kombogiannis, S.; Katirtzoglou, G.; Maliaris, G.
Journal Article
2013Effect of silicon content on PVD film mechanical properties and cutting performance of coated cemented carbide inserts
Bouzakis, K.-D.; Bouzakis, E.; Kombogiannis, S.; Paraskevopoulou, R.; Skordaris, G.; Makrimallakis, S.; Katirtzoglou, G.; Pappa, M.; Gerardis, S.; M'Saoubi, R.; Andersson, J.M.
Journal Article, Conference Paper
2013Prediction of coated tools performance in milling based on the film fatigue at different strain rates
Bouzakis, K.D.; Paraskevopouloua, R.; Katirtzoglou, G.; Makrimallakis, S.; Bouzakis, E.; Charalampous, P.
Journal Article
2013Predictive model of tool wear in milling with coated tools integrated into a CAM system
Bouzakis, K.D.; Paraskevopoulou, R.; Katirtzoglou, G.; Makrimallakis, S.; Bouzakis, E.; Efstathiou, K.
Journal Article
2012Coated tools' wear description in down and up milling based on the cutting edge entry impact duration
Bouzakis, K.-D.; Makrimallakis, S.; Katirtzoglou, G.; Bouzakis, E.; Skordaris, G.; Maliaris, G.; Gerardis, S.
Journal Article
2012Coated toolwear behaviour in upand down millingat various chip lengths explained by the cutting edge impact loads
Bouzakis, K.-D.; Katirtzoglou, G.; Bouzakis, E.; Makrimallakis, S.; Maliaris, G.
Journal Article
2012Cutting tools coating failure prediction based on innovative film characterisation methods
Bouzakis, K.-D.; Skordaris, G.; Maliaris, G.; Bouzakis, E.; Makrimallakis, S.; Katirtzoglou, G.; Gerardis, S.
Journal Article
2012Effect of tool diameter and cutting edge entry impact duration on coated tool wear in milling of various kinematics
Bouzakis, K.-D.; Katirtzoglou, G.; Bouzakis, E.; Makrimallakis, S.; Maliaris, G.
Journal Article
2011Cutting performance of coated tools with various adhesion strength quantified by inclined impact tests
Bouzakis, K.-D.; Michailidis, N.; Bouzakis, E.; Katirtzoglou, G.; Makrimallakis, S.; Gerardis, S.; Pappa, M.; Klocke, F.; Schalaster, R.; Gorgels, C.
Journal Article
2011Effect of PVD films wet micro-blasting by various Al2O3 grain sizes on the wear behaviour of coated tools
Bouzakis, K.-D.; Bouzakis, E.; Skordaris, G.; Makrimallakis, S.; Tsouknidas, A.; Katirtzoglou, G.; Gerardis, S.
Journal Article
2011Influence of dry micro-blasting grain quality on wear behaviour of TiAlN coated tools
Bouzakis, K.-D.; Klocke, F.; Skordaris, G.; Bouzakis, E.; Gerardis, S.; Katirtzoglou, G.; Makrimallakis, S.
Journal Article
2011Optimization of wet micro-blasting on PVD films with various grain materials for improving the coated tools' cutting performance
Bouzakis, K.-D.; Skordaris, G.; Bouzakis, E.; Tsouknidas, A.; Makrimallakis, S.; Gerardis, S.; Katirtzoglou, G.
Journal Article
2011Optimization of wet or dry microblasting on PVD films by various Al2O3 grain sizes for improving the coated tools' cutting performance
Bouzakis, K.-D.; Tsouknidas, A.; Skordaris, G.; Bouzakis, E.; Makrimallakis, S.; Gerardis, S.; Katirtzoglou, G.
Journal Article
2010Adaption of graded Cr/CrN-interlayer thickness to cemented carbide substrates' roughness for improving the adhesion of HPPMS PVD films and the cutting performance
Bouzakis, K.-D.; Makrimallakis, S.; Katirtzoglou, G.; Skordaris, G.; Gerardis, S.; Bouzakis, E.; Leyendecker, T.; Bolz, S.; Koelker, W.
Journal Article, Conference Paper
2010Ambient and elevated temperature properties of TiN, TiAlN and TiSiN PVD films and their impact on the cutting performance of coated carbide tools
Bouzakis, K.-D.; Skordaris, G.; Gerardis, S.; Katirtzoglou, G.; Makrimallakis, S.; Pappa, M.; Lili, E.; M'Saoubi, R.
Journal Article
2010Chip length effect on the wear of coated cemented carbide inserts in milling
Bouzakis, K.-D.; Gerardis, S.; Katirtzoglou, G.; Makrimallakis, S.; Skordaris, G.; Efstathiou, K.
Conference Paper
2010The effect of substrate pretreatments and HPPMS-deposited adhesive interlayers' materials on the cutting performance of coated cemented carbide inserts
Bouzakis, K.-D.; Skordaris, G.; Gerardis, S.; Katirtzoglou, G.; Makrimallakis, S.; Pappa, M.; Bolz, S.; Kölker, W.
Conference Paper, Journal Article
2010Prediction of coating's properties after micro-blasting and their effect on the tool's cutting performance
Bouzakis, K.-D.; Klocke, F.; Skordaris, G.; Bouzakis, E.; Tsouknidas, A.; Gerardis, S.; Katirtzoglou, G.; Makrimallakis, S.
Conference Paper
2009Application in milling of coated tools with rounded cutting edges after the film deposition
Bouzakis, K.-D.; Gerardis, S.; Katirtzoglou, G.; Makrimallakis, S.; Bouzakis, A.; Cremer, R.; Fuss, H.-G.
Journal Article
2009Effect of dry micro-blasting on PVD-film properties, cutting edge geometry and tool life in milling
Bouzakis, K.-D.; Gerardis, S.; Skordaris, G.; Katirtzoglou, G.; Makrimallakis, S.; Klocke, F.; Bouzakis, E.
Journal Article