Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Bias voltage effect on the mechanical properties, adhesion and milling performance of PVD films on cemented carbide inserts
Skordaris, G.; Bouzakis, K.-D.; Charalampous, P.; Kotsanis, T.; Bouzakis, E.; Bejjani, R.
Journal Article
2018Bias voltage optimum adjustment considering coatings' strength and adhesion requirements when cutting various steels
Skordaris, G.; Bouzakis, K.-D.; Kotsanis, T.; Charalampous, P.; Bouzakis, E.; Bejjani, R.
Journal Article
2018A critical review of FEM models to simulate the nano-impact test on PVD coatings
Skordaris, G.; Bouzakis, K.; Charalampous, P.
Conference Paper
2016Adhesion of TiC and MoN physical vapor deposition coatings determined by innovative test methods directly on coated bearings
Bouzakis, K.-D.; Charalampous, P.; Skordaris, G.; Dimofte, F.; Ene, N.M.; Anderson, C.; Chavez, A.; Ekstrom, B.; Fetty, J.R.
Journal Article
2016Correlation between the wear behavior of coated cemented carbide tools and coatings properties assessed by nano-indentations, nanoand micro-impact tests
Bouzakis, Konstantinos-Dionysios; Charalampous, Panagiotis; Bouzakis, Emmanouil; Kotsanis, Tilemachos; Skordaris, Georios; Michailidis, Nikolaos; Klocke, Fritz; Bergs, Thomas; Ottersbach, Michael; Busch, Marc
Conference Paper
2015Effect of the interface fatigue strength of NCD coated hardmetal inserts on their cutting performance in milling
Bouzakis, K.D.; Skordaris, G.; Bouzakis, E.; Charalampous, P.; Kotsanis, T.; Tasoulas, D.; Kombogiannis, S.; Lemmer, O.
Journal Article
2015Explanation of the wear behaviour of NCD coated carbide tools facilitated by appropriate methods for assessing the coating adhesion deterioration at elevated temperatures
Bouzakis, K.-D.; Skordaris, G.; Bouzakis, E.; Tasoulas, D.; Charalampous, P.; Kotsanis, T.; Kombogiannis, S.; Lemmer, O.
Journal Article
2015Fatigue and adhesion characterization of DLC coatings on steel substrates by perpendicular and inclined impact tests
Bouzakis, K.-D.; Charalampous, P.; Skordaris, G.; Dimofte, F.; Ene, N.M.; Ehinger, R.; Gardner, S.; Modrzejewski, B.S.; Fetty, J.R.
Journal Article
2015Performance increase of hardmetal cutting tools based on stress-strain strain rate properties of their film
Bouzakis, K.D.; Charalampous, P.; Paraskevopoulou, R.; Skordaris, G.; Bouzakis, E.; Kombogiannis, S.; Katirtzoglou, G.; Makrimallakis, S.
Journal Article
2014Brittleness and fatigue effect of mono- and multi-layer PVD films on the cutting performance of coated cemented carbide inserts
Skordaris, G.; Bouzakis, K.D.; Charalampous, P.; Bouzakis, E.; Paraskevopoulou, R.; Lemmer, O.; Bolz, S.
Journal Article
2014Effect of cutting edge preparation of coated tools on their performance in milling various materials
Bouzakis, K.D.; Bouzakis, E.; Kombogiannis, S.; Makrimallakis, S.; Skordaris, G.; Michailidis, N.; Charalampous, P.; Paraskevopoulou, R.; M'Saoubi, R.; Aurich, J.C.; Barthelmä, F.; Biermann, D.; Denkena, B.; Dimitrov, D.; Engin, S.; Karpuschewski, B.; Klocke, F.; Özel, T.; Poulachon, G.; Rech, J.; Schulze, V.; Settineri, L.; Srivastava, A.; Wegener, K.; Uhlmann, E.; Zeman, P.
Journal Article
2014Fatigue strength of diamond coating-substrate interface assessed by inclined impact tests at ambient and elevated temperatures
Bouzakis, E.; Bouzakis, K.D.; Skordaris, G.; Charalampous, P.; Kombogiannis, S.; Lemmer, O.
Journal Article
2013Prediction of coated tools performance in milling based on the film fatigue at different strain rates
Bouzakis, K.D.; Paraskevopouloua, R.; Katirtzoglou, G.; Makrimallakis, S.; Bouzakis, E.; Charalampous, P.
Journal Article