Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Advanced production of thermoplastic composite pipes
Schäkel, Martin; Peters, Tido; Janssen, Henning; Brecher, Christian
Journal Article
2019Automated sprue removal from injection moulded micro-optics with ultrasonic cutting
Berger, Marvin; Hoeren, Maximilian; Sauer, Sebastian; Müller, Tobias; Zontar, Daniel; Brecher, Christian
Conference Paper
2019Biointelligenz. Eine neue Perspektive für nachhaltige industrielle Wertschöpfung
Beckett, Marc; Demmer, Axel; Elfert, Patrik; Full, Johannes; Hellmich, Arvid; Hien, Katharina; Hinxlage, Julian; Horbelt, Jessica; Jutz, Günther; Krieg, Sabine; Maufroy, Christophe; Miehe, Robert; Noack, Marian; Sauer, Alexander; Schließmann, Ursula; Scholz, Patrick; Schwarz, Oliver; Wrycza, Philipp
: Bauernhansl, Thomas (Hrsg.); Brecher, Christian (Hrsg.); Drossel, Welf-Guntram (Hrsg.); Gumbsch, Peter (Hrsg.); Ten Hompel, Michael (Hrsg.); Wolperdinger, Markus (Hrsg.)
Study
2019Hybrid modeling of thermo-elastic behavior of a three-axis machining center using integral deformation sensors
Brecher, Christian; Lee, Tae Hun; Tzanetos, Filippos; Zontar, Daniel
Journal Article, Conference Paper
2019Investigation of the negative influence of cooling lubricants on the deformation of the machine tool structure
Brecher, Christian; Tzanetos, Filippos; Zontar, Daniel
Conference Paper
2019Lab-on-a Disc - Automated Production of Microfluidic Systmes
Berger, Marvin; Voebel, Toni; Rohrbeck, Malte; Zontar, Daniel; Ducrée, Jens; Brecher, Christian
Poster
2019Offline development of active-alignment-algorithms by efficient interpolation of discrete databases
Hoeren, Maximilian; Zontar, Daniel; Sauer, Sebastian; Schmetz, Arno; Berger, Marvin; Müller, Tobias; Brecher, Christian
Conference Paper
2019Simulation of electrical conductivity for nanoparticles and nanotubes composite sensor according to geometrical properties of nanomaterials
Min, Soo-Hong; Lee, Tae Hun; Lee, Sangwook; Song, Ji-Hyeon; Lee, Gil-Yong; Zontar, Daniel; Brecher, Christian; Ahn, Sung-Hoon
Journal Article
2019Technische Heimaten für menschliche Zellen
Leyens, Christoph; Klotzbach, Udo; Sonntag, Frank; Wolperdinger, Markus; Loskill, Peter; Bauernhansl, Thomas; Traube, Andreas; Brecher, Christian; Schmitt, Robert; König, Niels
Book Article
2018Automated assembly of lens barrels with active wavefront sensor guiding
Berger, Marvin; Müller, Tobias; Meiers, Bernd; Sauer, Sebastian; Krappig, Reik; Baum, Christoph; Brecher, Christian
Conference Paper
2018Automated assembly of microfluidic "lab-on-a-disc"
Berger, Marvin; Müller, Tobias; Voebel, Toni; Baum, Christoph; Glennon, T.; Mishra, R.; Kinahan, D.; King, D.; Ducrée, J.; Brecher, Christian
Conference Paper
2018Ein Beitrag zur Modellierung des thermischen Umgebungseinflusses an Werkzeugmaschinen
Brecher, Christian; Kneer, Reinhold; Spierling, Robert; Frekers, Yona; Fey, Marcel
Journal Article
2018Data Collection and Analysis for the Creation of a Digital Shadow During the Production of Thermoplastic Composite Layers in Unbonded Flexible Pipes
Schäkel, Martin; McNab, John; Dodds, Neville; Peters, Tido; Janssen, Henning; Brecher, Christian
Conference Paper
2018Hybrid correction of thermal errors using temperature and deformation sensors
Naumann, Christian; Brecher, Christian; Baum, Christoph; Tzanetos, F.; Ihlenfeldt, Steffen; Putz, Matthias
Conference Paper
2018Model-predictive control for the automated production of thermoplastic composite pressure vessels
Schäkel, Martin; Janssen, Henning; Brecher, Christian
Conference Paper
2018Surface adaptive fast axis ultra precision turning
Brozio, Matthias; Sensen, Dominik; Wenzel, Christian; Freutel, Simon; Brecher, Christian
Conference Paper
2018Thermally induced volumetric error compensation by means of integral deformation sensors
Baum, Christoph; Brecher, Christian; Klatte, Michel; Lee, Tae Hun; Tzanetos, Filippos
Journal Article, Conference Paper
2017Analysis of spatial and temporal dependencies of the TCP-dislocation measurement for the assessment of the thermo-elastic behavior of 3-axis machine tools
Brecher, Christian; Klatte, Michel; Tzanetos, Filippos
Conference Paper
2017Bewertung von Multitechnologieplattformen
Rey, Jan; Bois-Reymond, Frédéric du; Schmid, Alexander; Trauth, Daniel; Mattfeld, Patrick; Klocke, Fritz; Brecher, Christian
Journal Article
2017Continuous assessment of geometrical properties from unidirectional fiber reinforced tapes
Buschhoff, Clemens; Schäkel, Martin; Janssen, Henning; Brecher, Christian
Conference Paper
2017Data collection and utilization during the adaptive production of thermoplastic composite pressure vessels
Peters, Tido; Schäkel, Martin; Janssen, Henning; Brecher, Christian
Presentation
2017Efficient production of tailored structural thermoplastic composite parts by combining tape placement and 3d printing
Janssen, Henning; Peters, Tido; Brecher, Christian
Journal Article, Conference Paper
2017Engineering valley - Internet of production auf dem RWTH Aachen Campus
: Schuh, Günther; Brecher, Christian; Klocke, Fritz; Schmitt, Robert
Book
2017Experimentelle Analyse modellbasierter Korrekturverfahren für Thermo-elastische Verformungen im Online-Einsatz an einer Demonstratormaschine
Naumann, Christian; Thiem, Xaver; Riedel, Mirko; Ihlenfeldt, Steffen; Spierling, Robert; Wennemer, Matthias; Fey, Marcel; Brecher, Christian; Kauschinger, Bernd
Conference Paper
2017Intelligente Algorithmik für integrierte Sensorik: Prozessüberwachung im multisensorischen Werkzeughalter
Brecher, Christian; Brozio, Matthias; Baum, Christoph
Conference Paper
2017Internet of Production für agile Unternehmen. AWK Aachener Werkzeugmaschinen-Kolloquium 2017
: Brecher, Christian; Klocke, Fritz; Schmitt, Robert; Schuh, Günther
Conference Proceedings
2017Joining techniques
Buschhoff, Clemens; Emonts, Michael; Brecher, Christian
Book Article
2017Manufacturing of miniaturized thermoplastic FRP components using a novel reaction injection pultrusion process
Brack, Alexander; Janssen, Henning; Brecher, Christian
Conference Paper
2017Online data collection and modeling for the adaptive production of composite pipes & vessels
Schäkel, Martin; Janssen, Henning; Brecher, Christian
Presentation
2017Quantification of micro-pullwinding process as basis of data mining algorithms for predictive process model
Wasiak, Christian; Nettleton, David; Janssen, Henning; Brecher, Christian
Conference Paper
2017Robuste Produktionssysteme durch Sensorintegration
Brecher, Christian; Baum, Christoph; Billep, D.; Brozio, Matthias; Essig, B.; Klatte, Michel; Lee, Tae Hun; Mallmann, Guilherme; Reiser, W.; Salvasohn, M.; Probst, U.
Conference Paper
2017Rotationsachsen blitzschnell vermessen
Brecher, Christian; Behrens, Jan; Lee, Tae Hun; Langlotz, Enrico; Dontsov, Denis; Schott, Walter
Journal Article
2017Schnittstellen im Fokus
Brecher, Christian; Bergs, Christian; Fey, Marcel
Journal Article
2017Sensorischer Spindelstock zur Thermo-Korrektur
Brecher, Christian; Klatte, Michel
Journal Article
2017System improvement for laser-based tape placement to directly manufacture metal / thermoplastic composite parts
Peters, Tido; Kukla, Christian; Janssen, Henning; Brecher, Christian
Conference Paper
2017Technology platforms
Brecher, Christian; Schuh, Günther; Bräkling, André; Özdemir, Denis; Wassong, Anja; Weber, Anja
Book Article
2017Thermal analysis of a novel five-axis machine tool using measuring probe and R-test procedure
Brecher, Christian; Behrens, Jan; Klatte, Michel; Lee, Tae Hun; Tzanetos, Filippos
Conference Paper
2016Continuous thermoforming of unidirectional fiber reinforced tapes for the manufacturing of 3D lightweight components
Brecher, Christian; Buschhoff, Clemens; Emonts, Michael
Conference Paper
2016Development and ramp-up of automated laser assembly
Axt, Christoph; Rübenach, Olaf; Haverkamp, Tobias; Garlich, Torsten; Seelert, Wolf; Schlette, Christian; Losch, Daniel; Roßmann, Jürgen; Claver Pont, Pere; Ventura-Traveset, Antonio; Haag, Sebastian; Sauer, Sebastian; Brecher, Christian
: Haag, Sebastian
Report
2016Development of an artifact-free aneurysm clip
Brack, Alexander; Senger, Sebastian; Fischer, Gerrit; Janssen, Henning; Oertel, Joachim; Brecher, Christian
Journal Article
2016High volume production of lightweight automotive structures
Buschhoff, Clemens; Brecher, Christian; Emonts, Michael
Conference Paper
2016In Serie lokal verstärken
Brecher, Christian; Janssen, Henning; Buschhoff, Clemens; Peters, Tido
Journal Article
2016Increasing cost and eco efficiency for selective tape placement and forming by adaptive process design
Brecher, Christian; Schmitt, Robert; Lindner, Florian; Peters, Tido; Emonts, Michael; Große Böckmann, Markus
Journal Article, Conference Paper
2016Individuell und automatisiert. Vernetzte Produktionstechnik für die additive Fertigung individualisierter Faserverbundbauteile
Brecher, Christian; Werner, Daniel; Janssen, Henning; Hildebrandt, Markus; Beste, Christian
Journal Article
2016Infrarotkameragestützte Prozesstemperaturerfassung
Brecher, Christian; Emonts, Michael; Kukla, Christian
Journal Article
2016Kunststoffkomponenten für LED-Beleuchtungsanwendungen
Brecher, Christian; Baum, Christoph; Simone, Daniel de; Meiers, Bernd; Krappig, Reik
Book
2016Laminate aus duroplastischen Prepregs mit aktivierbarer Adhäsion
Werner, Daniel; Janssen, Henning; Brecher, Christian
Journal Article
2016Präzisionsfertigung von Großbauteilen
Brecher, Christian; Schmitt, Robert; Behrens, Jan; Ohlenforst, Markus; Peterek, Martin; Wennemer, Matthias
Journal Article
2016Radio channel characterization at 5.85 GHz for wireless M2M communication of industrial robots
Holfeld, Bernd; Wieruch, Dennis; Raschkowski, Leszek; Wirth, Thomas; Pallasch, Christoph; Herfs, Werner; Brecher, Christian
Conference Paper
2016Self-optimizing production systems
Permin, Eike; Bertelsmeier, Felix; Blum, Matthias; Bützler, Jennifer; Haag, Sebastian; Kuz, Sinem; Özdemir, Denis; Stemmler, Sebastian; Thombansen, Ulrich; Schmitt, Robert; Brecher, Christian; Schlick, Christopher; Abel, Dirk; Poprawe, Reinhart; Loosen, Peter; Schulz, Wolfgang; Schuh, Günther
Journal Article, Conference Paper
2016Smart production of tubular thermoplastic composite products
Brecher, Christian; Emonts, Michael; Peters, Tido
Presentation
2016Technological and simulative analysis of power skiving
Klocke, Fritz; Brecher, Christian; Löpenhaus, Christoph; Ganser, Philipp; Staudt, Julian; Krömer, Markus
Journal Article, Conference Paper
2016Thermo Energetic Design of Machine Tools and Requirements for Smart Fluid Power Systems
Brecher, Christian; Jasper, David; Wennemer, Matthias; Klatte, Michel
Conference Paper
2015"Multi-Material-Head". One tool for 3 technologies
Brecher, Christian; Werner, Daniel; Emonts, Michael
Conference Paper
20157. Kolloquium Mikroproduktion 2015. CD-ROM
: Hopmann, C.; Brecher, Christian; Dietzel, A.; Drummer, D.; Hanemann, T.
Conference Proceedings
2015Analyse des Biegeverhaltens von Werkzeugschnittstellen
Brecher, Christian
Journal Article
2015Cost-effective high speed production of multi-material components by selective tape placement
Brecher, Christian; Peters, Tido; Emonts, Michael
Conference Paper
2015Energiekosten mehr als halbiert
Brecher, Christian; Werner, Daniel; Emonts, Michael; Steinmayer, Marc
Journal Article
2015Form-adaptive gripping system for light-weight productions
Brecher, Christian; Kukla, Christian; Schares, Richard; Emonts, Michael
Conference Paper
2015Kontinuierliche Fertigung hybrider Mehrlagensysteme
Brecher, Christian; Baum, Christoph; Bastuck, Thomas; Priwisch, Martin
Conference Paper
2015Kontinuierliche Fertigung von Mehrlagen-Mikrosystemen
Brecher, Christian; Baum, Christoph; Priwisch, Martin; Bastuck, Thomas
Conference Paper
2015Mass customization of high performance composites with low investment costs
Brecher, Christian; Buschhoff, Clemens; Janssen, Henning; Emonts, Michael
Conference Paper
2015Menschliche Ersatzteile in Leichtbauweise
Brecher, Christian; Emonts, Michael; Brack, Alexander
Journal Article
2015Mikro-Profile aus Faserverbundkunststoffen
Brecher, Christian; Emonts, Michael; Wasiak, Christian
Journal Article
2015Multi-Material-Head. Novel laser-assisted tape, prepred and dryfiber placement system
Brecher, Christian; Emonts, Michael; Werner, Daniel
Presentation
2015Optische Kunststoffkomponenten für die LED-Beleuchtung
Brecher, Christian; Simone, Daniel de; Meiers, Bernd; Krappig, Reik; Baum, Christoph
Journal Article
2015Unidirectional fiber reinforced tapes as energy director for the ultrasonic welding of thermoplastic composites
Brecher, Christian; Buschhoff, Clemens; Emonts, Michael
Presentation
2014Calculation of the tooth root load carrying capacity of beveloid gears
Brecher, Christian; Brumm, Markus; Henser, Jannik
Journal Article
2014Efficient processes for continuous fiber-reinforced thermoplastics
Brecher, Christian; Kermer-Meyer, Alexander; Emonts, Michael
Abstract
2014Effizient zum lnterieur
Brecher, Christian; Werner, Daniel; Emonts, Michael; Steinmayer, Marc
Journal Article
2014Effizienzsteigerung bei der PKD-Bearbeitung
Brecher, Christian; Klocke, Fritz; Mattfeld, Patrick; Schindler, Florestan; Emonts, Michael; Janssen, Andreas; Hermani, Jan-Patrick; Storms, Thomas
Journal Article
2014Elemente der Werkzeugmaschinen
Brecher, Christian; Weck, Manfred; Schmidt, S.; Epple, A.; Krömer, M.
Book Article
2014Evaluationsassistenz für die NC-Bearbeitungsplanung komplexer Fräsprozesse
Lohse, Wolfram
: Brecher, Christian; Klocke, Fritz; Schmitt, Robert; Schuh, Günther
Dissertation
2014Fabrication of the magnetic circuit for the BIPM watt balance
Ellinghaus, Jan M.; Arneson, Dave; Brecher, Christian; Wenzel, Christian; Knapp, Byron; Kiss, Adrien; Lavergne, Thomas; Stock, Michael
Conference Paper
2014Improvement of the design method for helical gears by considering manufacturing related bias errors
Brecher, Christian; Brumm, Markus; Hellmann, M.
Conference Paper
2014Improvement of the excitation behavior of bevel gears considering tolerance fields caused by manufacturing and assembly processes
Brecher, Christian; Brumm, Markus; Knecht, P.
Conference Paper
2014Integrative Produktion : Industrie 4.0, Aachener Perspektiven. Tagungsband
: Brecher, Christian
Conference Proceedings
2014Local simulation of the specific material removal rate for generating gear grinding
Brecher, Christian; Klocke, Fritz; Brumm, Markus; Hübner, F.
Conference Paper
2014Mikrostrukturen für autarke Systeme der Zellkultivierung
Brecher, Christian; Ellinghaus, Jan Moritz; Fleger, Markus; Holzer, Matthias; Meiers, Bernd; Wald, Christian; Wenzel, Christian
Journal Article
2014Multi-Material-Head: Modulares und laserunterstütztes Tapelegesystem
Werner, Daniel; Emonts, Michael; Brecher, Christian
Journal Article
2014Optimierung fertigungsbedingter Grenzschichten
Brecher, Christian; Brumm, Markus; Greschert, R.
Journal Article
2014Realer Nutzen aus virtuellen Produktionsmaschinen
Brecher, Christian; Beck, E.; Bock, G.; Broos, A.; Epple, A.; Fey, M.; Fischer, A.; Herfs, Werner; Klement, R.; Lohse, Wolfram; Özdemir, D.; Wagner, P.
Conference Paper
2014Test methodology to determine excitation levels of gears in gear boxes
Brecher, Christian; Brumm, Markus; Hesse, J.; Hellmann, M.
Conference Paper
2014Unterstützung für die Inbetriebnahme von Montagerobotern
Brecher, Christian; Ecker, C.; Storms, T; Lohse, Wolfram
Journal Article
2014Validierung der allgemeinen, FE-basierten Zahnkontaktanalyse
Brecher, Christian; Brumm, Markus; Knecht, P.; Henser, Jannick
Conference Paper
2014Verfahren zum Betrieb einer Greifvorrichtung sowie elektrostatische Greifvorrichtung
Ozolin, Boris; Werner, Daniel; Emonts, Michael; Brecher, Christian
Patent
2013Comparison of local approaches for the evaluation of tooth root load carrying capacity of beveloid gears
Brecher, Christian; Brumm, Markus; Henser, Jannik
Conference Paper
2013Finishing of polycrystalline diamond tools by combining laser ablation with grinding
Brecher, Christian; Klocke, Fritz; Schindler, Florestan; Janssen, Andreas; Fischer, Bettina; Hermani, Jan-Patrick
Journal Article
2013In-process measurement of machine structure deformation and compensation of resulting work piece inaccuracies
Brecher, Christian; Flore, Jakob; Klatte, Michel; Wenzel, Christian
Conference Paper
2013Laserunterstützte Blechbearbeitung
Brecher, Christian; Emonts, Michael; Eckert, Markus
Journal Article
2013Micro-Pullwinding - An Automated Production Technology for Medical Devices
Brecher, Christian; Emonts, Michael; Brack, Alexander; Eckert, Markus
Conference Paper
2013Ein STEP- und STEP-NC-basiertes PLM-System
Brecher, Christian; Königs, M.; Lohse, Wolfram
Journal Article
2012Customized solutions for laser-assisted tape placement
Brecher, Christian; Kermer-Meyer, Alexander; Werner, Daniel; Stimpfl, Joffrey; Janssen, Henning; Emonts, Michael
Journal Article
2012High precision, fast and flexible calibration of robots and large multi-axis machine tools
Brecher, Christian; Flore, Jakob; Haag, Sebastian; Wenzel, Christian
Conference Paper
2012Integrative Production Technology for High-wage Countries
Brecher, Christian; Jeschke, Sabina; Schuh, Günther; Aghassi, Susanne; Arnoscht, Jens; Bauhoff, Fabian; Fuchs, Sascha; Jooß, Claudia; Karmann, Wilhelm Oliver; Kozielski, Stefan; Orilski, Simon; Richert, Anja; Roderburg, Andreas; Schiffer, Michael; Schubert, Johannes; Stiller, Sebastian; Tönissen, Stefan; Welter, Florian
Book Article
2012Machine integrated, direct measuring devices for the compensation of thermal deformation
Brecher, Christian; Flore, Jakob; Klatte, Michel; Merz, A.; Wenzel, Christian
Conference Paper
2012Machine Integrated, Robust Direct Measuring Devices for the Compensation of Thermal Deformation
Brecher, Christian; Flore, Jakob; Klatte, Michel; Wenzel, Christian
Conference Paper
2011Automatisierte Justage von CO2-Laserstrahlführungssystemen
Brecher, Christian; Emonts, Michael; Stimpfl, Joffrey; Müller, Juliane
Journal Article
2011Flexible Oberflächenbearbeitung durch scannerbasierte Systemtechnik
Brecher, Christian; Emonts, Michael; Rosen, Chris-Jörg; Heinen, Daniel
Journal Article
2011Innovative manufacturing of 3D-lightweight components
Brecher, Christian; Dubratz, Markus; Stimpfl, Joffrey; Emonts, Michael
Journal Article
2011Integrative Simulation von Werkzeugmaschine und Fertigungstechnologie
Brecher, Christian; Klocke, Fritz; Lohse, Wolfram; Cabral, Gustavo Francisco; Rasim, Matthias; Triebs, Johannes; Minoufekr, Meysam; Bäumler, Stephan; Bergs, Thomas; Herfs, Werner; Glasmacher, Lothar; Wegner, Hagen
Book Article
2011Schwingung erleichtert den Abtrag. Superfinishen: Ultraschall verbessert Produktivität beim Bearbeiten zylindrischer Präzisionsbauteile
Brecher, Christian; Hannig, Sophia; Tawakoli, Taghi
Journal Article
2011Self-optimizing assembly of laser systems
Loosen, Peter; Schmitt, Robert; Brecher, Christian; Müller, Rainer; Funck, Max; Gatej, Alexander; Morasch, Valentin; Pavim, Alberto; Pyschny, Nicolas
Journal Article
2011Verkürzung von Prozessketten durch Verfahrensintegration in Werkzeugmaschinen
Brecher, Christian; Bäumler, Stephan; Breitbach, Tobias; Do-Khac, Dennis; Herfs, Werner; Karlberger, Andreas; Klocke, Fritz; Arntz, Kristian; Heinen, Daniel; Emonts, Michael; Hermani, Jan-Patrick; Janssen, Andreas
Book Article
2010Design of transversal ultrasonic systems
Brecher, Christian; Hannig, Sophia
Presentation
2010Design of Ultrasonic Systems
Brecher, Christian; Hannig, Sophia
Presentation
2010Intelligente Lasersystemtechnik
Stimpfl, Joffrey; Brecher, Christian; Emonts, Michael
Journal Article
2010Prozessauslegung beim Laserstrahlunterstützten Stanzen
Grden, Martin; Sakkiettibutra, Jens; Vollertsen, Frank; Johnigk, Carsten; Emonts, Michael; Brecher, Christian; Eckert, Markus
Journal Article
2010Schweißen statt Knoten
Brecher, Christian; Schütte, Adrian; Pyschny, Nicolas
Journal Article
2009'iTool' - Process and design considerations for innovative diamond tool making
Brecher, Christian; Utsch, Philip; Sobotka, Andreas; Wenzel, Christian
Conference Paper
2009Flexibel automatisierte Montagesysteme
Müller, Rainer; Esser, Martin; Janßen, Christian; Brecher, Christian; Pyschny, Nicolas
Conference Paper
2009Hybride Fräsbearbeitung hochfester Werkstoffe
Brecher, Christian; Rosen, Chris-Jörg
Journal Article
2009New materials for magnetic resonance imaging (MRI) - fiber-reinforced guide wires and catheters for minimal invasive interventions
Schütte, Adrian; Brecher, Christian; Steyer, Martin; Krüger, Sascha; Krombach, Gabriele A.
Conference Paper
2008Technologie der Zukunft: Laserunterstütztes Fiber Placement
Dubratz, Markus; Brecher, Christian; Wenzel, Christian
Journal Article
2007New approaches for an automised production in ultraprecision machining
Brecher, Christian; Weinzierl, Martin
Conference Paper
2007Zuverlässigkeit und Diagnose in der Produktion
Brecher, Christian; Verl, Alexander
: Krüger, Joachim (Hrsg.); Uhlmann, Eckart Gunter (Hrsg.)
Book
2006Komplettbearbeitung - Fräsen, Drehen und Lasern in einer Maschine
Brecher, Christian; Deutges, Dominic; Emonts, Michael; Frank, Jörg; Lange, Sven Carsten
Journal Article
2006Kürzere Prozessketten durch Verfahrenskombination
Brecher, Christian; Emonts, Michael; Frank, Peter
Journal Article
2006Off-axis machining of NURBS freeform surfaces by fast tool servo system
Brecher, Christian; Lange, Sven Carsten; Merz, Michael; Niehaus, Frank; Winterschladen, Markus
Conference Paper
2005Hochgenaue optische Freiformflächen - schnell gefertigt
Brecher, Christian; Winterschladen, Markus; Lange, Sven; Merz, Michael
Journal Article
2005Von der Idee bis zur Serie
Brecher, Christian; Kölzer, Patrick; Schmitz, Sebastian; Lange, Sven
Conference Paper