Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Adaptive, connected production of hybrid thermoplastic prototypes
Schulz, M.; Janssen, H.; Brecher, C.
Journal Article
2019Advanced production of thermoplastic composite pipes
Schäkel, Martin; Peters, Tido; Janssen, Henning; Brecher, Christian
Journal Article
2019Automated sprue removal from injection moulded micro-optics with ultrasonic cutting
Berger, Marvin; Hoeren, Maximilian; Sauer, Sebastian; Müller, Tobias; Zontar, Daniel; Brecher, Christian
Conference Paper
2019Biointelligenz. Eine neue Perspektive für nachhaltige industrielle Wertschöpfung
Beckett, Marc; Demmer, Axel; Elfert, Patrik; Full, Johannes; Hellmich, Arvid; Hien, Katharina; Hinxlage, Julian; Horbelt, Jessica; Jutz, Günther; Krieg, Sabine; Maufroy, Christophe; Miehe, Robert; Noack, Marian; Sauer, Alexander; Schließmann, Ursula; Scholz, Patrick; Schwarz, Oliver; Wrycza, Philipp
: Bauernhansl, Thomas (Hrsg.); Brecher, Christian (Hrsg.); Drossel, Welf-Guntram (Hrsg.); Gumbsch, Peter (Hrsg.); Ten Hompel, Michael (Hrsg.); Wolperdinger, Markus (Hrsg.)
Study
2019Hybrid modeling of thermo-elastic behavior of a three-axis machining center using integral deformation sensors
Brecher, Christian; Lee, Tae Hun; Tzanetos, Filippos; Zontar, Daniel
Journal Article, Conference Paper
2019Investigation of the negative influence of cooling lubricants on the deformation of the machine tool structure
Brecher, Christian; Tzanetos, Filippos; Zontar, Daniel
Conference Paper
2019Lab-on-a Disc - Automated Production of Microfluidic Systmes
Berger, Marvin; Voebel, Toni; Rohrbeck, Malte; Zontar, Daniel; Ducrée, Jens; Brecher, Christian
Poster
2019Offline development of active-alignment-algorithms by efficient interpolation of discrete databases
Hoeren, Maximilian; Zontar, Daniel; Sauer, Sebastian; Schmetz, Arno; Berger, Marvin; Müller, Tobias; Brecher, Christian
Conference Paper
2019Simulation of electrical conductivity for nanoparticles and nanotubes composite sensor according to geometrical properties of nanomaterials
Min, Soo-Hong; Lee, Tae Hun; Lee, Sangwook; Song, Ji-Hyeon; Lee, Gil-Yong; Zontar, Daniel; Brecher, Christian; Ahn, Sung-Hoon
Journal Article
2019Technische Heimaten für menschliche Zellen
Leyens, Christoph; Klotzbach, Udo; Sonntag, Frank; Wolperdinger, Markus; Loskill, Peter; Bauernhansl, Thomas; Traube, Andreas; Brecher, Christian; Schmitt, Robert; König, Niels
Book Article
2018Approach for zero defect manufacturing: Geometric calibration of five-axis machine tools for blisk manufacturing process
Lee, T.H.; Behrens, J.; Gierlings, S.; Brecher, C.
Conference Paper
2018Automated assembly of lens barrels with active wavefront sensor guiding
Berger, Marvin; Müller, Tobias; Meiers, Bernd; Sauer, Sebastian; Krappig, Reik; Baum, Christoph; Brecher, Christian
Conference Paper
2018Automated assembly of microfluidic "lab-on-a-disc"
Berger, Marvin; Müller, Tobias; Voebel, Toni; Baum, Christoph; Glennon, T.; Mishra, R.; Kinahan, D.; King, D.; Ducrée, J.; Brecher, Christian
Conference Paper
2018Ein Beitrag zur Modellierung des thermischen Umgebungseinflusses an Werkzeugmaschinen
Brecher, Christian; Kneer, Reinhold; Spierling, Robert; Frekers, Yona; Fey, Marcel
Journal Article
2018Data Collection and Analysis for the Creation of a Digital Shadow During the Production of Thermoplastic Composite Layers in Unbonded Flexible Pipes
Schäkel, Martin; McNab, John; Dodds, Neville; Peters, Tido; Janssen, Henning; Brecher, Christian
Conference Paper
2018Experimental and numerical investigation of dual phase steels formability during laser-assisted hole-flanging
Motaman, S.A.H.; Komerla, K.; Storms, T.; Prahl, U.; Brecher, C.; Bleck, W.
Conference Paper
2018Hybrid correction of thermal errors using temperature and deformation sensors
Naumann, Christian; Brecher, Christian; Baum, Christoph; Tzanetos, F.; Ihlenfeldt, Steffen; Putz, Matthias
Conference Paper
2018Model-predictive control for the automated production of thermoplastic composite pressure vessels
Schäkel, Martin; Janssen, Henning; Brecher, Christian
Conference Paper
2018Surface adaptive fast axis ultra precision turning
Brozio, Matthias; Sensen, Dominik; Wenzel, Christian; Freutel, Simon; Brecher, Christian
Conference Paper
2018Thermally induced volumetric error compensation by means of integral deformation sensors
Baum, Christoph; Brecher, Christian; Klatte, Michel; Lee, Tae Hun; Tzanetos, Filippos
Journal Article, Conference Paper
2017Active alignment of DOE based structured light application in consumer electronics
Zontar, D.; Müller, T.; Sauer, S.; Hettler, N.; Brecher, C.
Conference Paper
2017Analysis of spatial and temporal dependencies of the TCP-dislocation measurement for the assessment of the thermo-elastic behavior of 3-axis machine tools
Brecher, Christian; Klatte, Michel; Tzanetos, Filippos
Conference Paper
2017Application of an unscented Kalman filter for modeling multiple types of machine tool errors
Brecher, C.; Brozio, M.; Klatte, M.; Lee, T.H.; Tzanetos, F.
Journal Article, Conference Paper
2017Bewertung von Multitechnologieplattformen
Rey, Jan; Bois-Reymond, Frédéric du; Schmid, Alexander; Trauth, Daniel; Mattfeld, Patrick; Klocke, Fritz; Brecher, Christian
Journal Article
2017Calibration of five-axis machine tool using R-test procedure
Brecher, C.; Behrens, J.; Lee, T.H.; Charlier, S.
Conference Paper
2017Cognition-enhanced, self-optimizing assembly systems
Schmitt, R.; Corves, B.; Loosen, P.; Brecher, C.; Jeschke, S.; Kimmelmann, W.; Hüsing, M.; Stollenwerk, J.; Bertelsmeier, F.; Detert, T.; Haag, S.; Hoffmann, M.; Holters, M.; Kurtenbach, S.; Permin, E.; Prochnau, M.; Storm, C.K.; Janßen, M.
Book Article
2017Continuous assessment of geometrical properties from unidirectional fiber reinforced tapes
Buschhoff, Clemens; Schäkel, Martin; Janssen, Henning; Brecher, Christian
Conference Paper
2017Data collection and utilization during the adaptive production of thermoplastic composite pressure vessels
Peters, Tido; Schäkel, Martin; Janssen, Henning; Brecher, Christian
Presentation
2017Efficient production of tailored structural thermoplastic composite parts by combining tape placement and 3d printing
Janssen, Henning; Peters, Tido; Brecher, Christian
Journal Article, Conference Paper
2017Engineering valley - Internet of production auf dem RWTH Aachen Campus
: Schuh, Günther; Brecher, Christian; Klocke, Fritz; Schmitt, Robert
Book
2017Experimentelle Analyse modellbasierter Korrekturverfahren für Thermo-elastische Verformungen im Online-Einsatz an einer Demonstratormaschine
Naumann, Christian; Thiem, Xaver; Riedel, Mirko; Ihlenfeldt, Steffen; Spierling, Robert; Wennemer, Matthias; Fey, Marcel; Brecher, Christian; Kauschinger, Bernd
Conference Paper
2017Individualized FAC on bottom tab subassemblies to minimize adhesive gap between emitter and optics
Sauer, S.; Müller, T.; Haag, S.; Beleke, A.; Zontar, D.; Baum, C.; Brecher, C.
Conference Paper
2017Intelligente Algorithmik für integrierte Sensorik: Prozessüberwachung im multisensorischen Werkzeughalter
Brecher, Christian; Brozio, Matthias; Baum, Christoph
Conference Paper
2017Internet of Production für agile Unternehmen. AWK Aachener Werkzeugmaschinen-Kolloquium 2017
: Brecher, Christian; Klocke, Fritz; Schmitt, Robert; Schuh, Günther
Conference Proceedings
2017Joining of thermoplastic tapes with metal alloys utilizing novel laser sources and enhanced process control in a tape placement process
Kukla, C.; Peters, T.; Janssen, H.; Brecher, C.
Journal Article, Conference Paper
2017Joining techniques
Buschhoff, Clemens; Emonts, Michael; Brecher, Christian
Book Article
2017Manufacturing of miniaturized thermoplastic FRP components using a novel reaction injection pultrusion process
Brack, Alexander; Janssen, Henning; Brecher, Christian
Conference Paper
2017Multi-technology platforms (MTPs)
Brecher, C.; Bleck, W.; Feldhusen, J.; Hirt, G.; Klocke, F.; Reisgen, U.; Schmitt, R.; Bailly, D.; Bambach, M.; Conrads, L.; Bois-Reymond, F. du; Göttmann, A.; Gräfe, S.; Harraz, M.; Heller, J.E.; Herfs, W.; Komerla, K.C.; Laugwitz, M.; Löwer, M.; Mertin, C.; Naumov, A.; Nittinger, J.; Peterek, M.; Prahl, U.; Rey, J.; Schiebahn, A.; Schmid, A.; Schmitz, R.; Tönissen, S.; Voswinckel, H.; Wegener, M.; Wellmann, F.
Book Article
2017Online data collection and modeling for the adaptive production of composite pipes & vessels
Schäkel, Martin; Janssen, Henning; Brecher, Christian
Presentation
2017Quantification of micro-pullwinding process as basis of data mining algorithms for predictive process model
Wasiak, Christian; Nettleton, David; Janssen, Henning; Brecher, Christian
Conference Paper
2017Robuste Produktionssysteme durch Sensorintegration
Brecher, Christian; Baum, Christoph; Billep, D.; Brozio, Matthias; Essig, B.; Klatte, Michel; Lee, Tae Hun; Mallmann, Guilherme; Reiser, W.; Salvasohn, M.; Probst, U.
Conference Paper
2017Rotationsachsen blitzschnell vermessen
Brecher, Christian; Behrens, Jan; Lee, Tae Hun; Langlotz, Enrico; Dontsov, Denis; Schott, Walter
Journal Article
2017Schnittstellen im Fokus
Brecher, Christian; Bergs, Christian; Fey, Marcel
Journal Article
2017Self-optimizing production systems. Front matter
Schlick, C.; Schuh, G.; Klocke, F.; Schmitt, R.; Abel, D.; Brecher, C.; Corves, B.; Gries, T.; Hopmann, C.; Jeschke, S.; Kampker, A.; Loosen, P.; Poprawe, R.; Reisgen, U.; Schulz, W.; Ziefle, M.; Bertelsmeier, F.; Blum, M.; Faber, M.; Gloy, Y.-S.; Keitzel, G.; Mertens, A.; Petruck, H.
Book Article
2017Sensorischer Spindelstock zur Thermo-Korrektur
Brecher, Christian; Klatte, Michel
Journal Article
2017System improvement for laser-based tape placement to directly manufacture metal / thermoplastic composite parts
Peters, Tido; Kukla, Christian; Janssen, Henning; Brecher, Christian
Conference Paper
2017Technology platforms
Brecher, Christian; Schuh, Günther; Bräkling, André; Özdemir, Denis; Wassong, Anja; Weber, Anja
Book Article
2017Thermal analysis of a novel five-axis machine tool using measuring probe and R-test procedure
Brecher, Christian; Behrens, Jan; Klatte, Michel; Lee, Tae Hun; Tzanetos, Filippos
Conference Paper
2016Approach for self-optimising assembly of optical systems
Holters, M.; Gatej, A.; Haag, S.; Müller, T.; Loosen, P.; Brecher, C.
Journal Article
2016Approaching improved adhesive bonding repeatability
Schlette, C.; Müller, T.; Romann, J.; Brecher, C.
Conference Paper
2016Automatisierte NC-Programmerstellung für Senkelektroden
Brecher, C.; Nittinger, J.; Krekeler, F.-G.
Journal Article
2016Continuous thermoforming of unidirectional fiber reinforced tapes for the manufacturing of 3D lightweight components
Brecher, Christian; Buschhoff, Clemens; Emonts, Michael
Conference Paper
2016Cyber-Physical Systems: Foundations, Principles and Applications
: Song, H.; Rawat, D.B.; Jeschke, S.; Brecher, C.
Book
2016Development and ramp-up of automated laser assembly
Axt, Christoph; Rübenach, Olaf; Haverkamp, Tobias; Garlich, Torsten; Seelert, Wolf; Schlette, Christian; Losch, Daniel; Roßmann, Jürgen; Claver Pont, Pere; Ventura-Traveset, Antonio; Haag, Sebastian; Sauer, Sebastian; Brecher, Christian
: Haag, Sebastian
Report
2016Development of an artifact-free aneurysm clip
Brack, Alexander; Senger, Sebastian; Fischer, Gerrit; Janssen, Henning; Oertel, Joachim; Brecher, Christian
Journal Article
2016Flexible assembly module for beam-shaping product families based on support structures
Haag, S.; Rübenach, O.; Beleke, A.; Haverkamp, T.; Müller, T.; Zontar, D.; Wenzel, C.; Brecher, C.
Conference Paper
2016High volume production of lightweight automotive structures
Buschhoff, Clemens; Brecher, Christian; Emonts, Michael
Conference Paper
2016Identifikation und Lokalisierung von Werkzeugen und Objekten. Auf Werkstattebene auf Basis von Bluetooth 4.0
Brecher, C.; Pallasch, C.; Hoffmann, N.; Obdenbusch, M.
Journal Article
2016In Serie lokal verstärken
Brecher, Christian; Janssen, Henning; Buschhoff, Clemens; Peters, Tido
Journal Article
2016Increasing cost and eco efficiency for selective tape placement and forming by adaptive process design
Brecher, Christian; Schmitt, Robert; Lindner, Florian; Peters, Tido; Emonts, Michael; Große Böckmann, Markus
Journal Article, Conference Paper
2016Individuell und automatisiert. Vernetzte Produktionstechnik für die additive Fertigung individualisierter Faserverbundbauteile
Brecher, Christian; Werner, Daniel; Janssen, Henning; Hildebrandt, Markus; Beste, Christian
Journal Article
2016Infrarotkameragestützte Prozesstemperaturerfassung
Brecher, Christian; Emonts, Michael; Kukla, Christian
Journal Article
2016Kunststoffkomponenten für LED-Beleuchtungsanwendungen
Brecher, Christian; Baum, Christoph; Simone, Daniel de; Meiers, Bernd; Krappig, Reik
Book
2016Laminate aus duroplastischen Prepregs mit aktivierbarer Adhäsion
Werner, Daniel; Janssen, Henning; Brecher, Christian
Journal Article
2016Model-based adhesive shrinkage compensation for increased bonding repeatability
Müller, T.; Schlette, C.; Lakshmanan, S.; Haag, S.; Zontar, D.; Sauer, S.; Wenzel, C.; Brecher, C.; Roßmann, J.
Conference Paper
2016Präzisionsfertigung von Großbauteilen
Brecher, Christian; Schmitt, Robert; Behrens, Jan; Ohlenforst, Markus; Peterek, Martin; Wennemer, Matthias
Journal Article
2016Radio channel characterization at 5.85 GHz for wireless M2M communication of industrial robots
Holfeld, Bernd; Wieruch, Dennis; Raschkowski, Leszek; Wirth, Thomas; Pallasch, Christoph; Herfs, Werner; Brecher, Christian
Conference Paper
2016Self-optimizing production systems
Permin, Eike; Bertelsmeier, Felix; Blum, Matthias; Bützler, Jennifer; Haag, Sebastian; Kuz, Sinem; Özdemir, Denis; Stemmler, Sebastian; Thombansen, Ulrich; Schmitt, Robert; Brecher, Christian; Schlick, Christopher; Abel, Dirk; Poprawe, Reinhart; Loosen, Peter; Schulz, Wolfgang; Schuh, Günther
Journal Article, Conference Paper
2016Smart production of tubular thermoplastic composite products
Brecher, Christian; Emonts, Michael; Peters, Tido
Presentation
2016Technological and simulative analysis of power skiving
Klocke, Fritz; Brecher, Christian; Löpenhaus, Christoph; Ganser, Philipp; Staudt, Julian; Krömer, Markus
Journal Article, Conference Paper
2016Thermal investigation of interaction between high-power CW-laser radiation and a water-jet
Brecher, C.; Janssen, H.; Eckert, M.; Schmidt, F.
Journal Article, Conference Paper
2016Thermo Energetic Design of Machine Tools and Requirements for Smart Fluid Power Systems
Brecher, Christian; Jasper, David; Wennemer, Matthias; Klatte, Michel
Conference Paper
2015"Multi-Material-Head". One tool for 3 technologies
Brecher, Christian; Werner, Daniel; Emonts, Michael
Conference Paper
20157. Kolloquium Mikroproduktion 2015. CD-ROM
: Hopmann, C.; Brecher, Christian; Dietzel, A.; Drummer, D.; Hanemann, T.
Conference Proceedings
2015Adjustable mounting device for high-volume production of beam-shaping systems for high-power diode lasers
Haag, S.; Bernhardt, H.; Rübenach, O.; Haverkamp, T.; Müller, T.; Zontar, D.; Brecher, C.
Conference Paper
2015Analyse des Biegeverhaltens von Werkzeugschnittstellen
Brecher, Christian
Journal Article
2015Application of machine integrated deformation sensors
Brecher, C.; Klatte, M.; Wenzel, C.
Conference Paper
2015Automatisierte Erstellung von Stabilitätskarten für Fräsbearbeitungen
Brecher, C.; Kiesewetter, C.; Epple, A.; Fey, M.
Journal Article
2015Comparison of roll-to-roll replication approaches for microfluidic and optical functions in lab-on-a-chip diagnostic devices
Brecher, C.; Baum, C.; Bastuck, T.
Conference Paper
2015Cost-effective high speed production of multi-material components by selective tape placement
Brecher, Christian; Peters, Tido; Emonts, Michael
Conference Paper
2015Customizable assembly solutions for optical systems
Müller, T.; Haag, S.; Zontar, D.; Sauer, S.; Brecher, C.
Conference Paper
2015Dämpfung von Loslagerkomponenten einer Hauptspindel
Brecher, C.; Habermann, R.; Fey, M.
Journal Article
2015Elektrostatische Greifersysteme für den Leichtbau
Brecher, C.; Kukla, C.; Schares, R.; Emonts, M.
Journal Article
2015Energiekosten mehr als halbiert
Brecher, Christian; Werner, Daniel; Emonts, Michael; Steinmayer, Marc
Journal Article
2015Form-adaptive gripping system for light-weight productions
Brecher, Christian; Kukla, Christian; Schares, Richard; Emonts, Michael
Conference Paper
2015Influences of closed loop control components on the performance of ultra-precision machines
Brecher, C.; Lindemann, D.; Wenzel, C.
Conference Paper
2015Kontinuierliche Fertigung hybrider Mehrlagensysteme
Brecher, Christian; Baum, Christoph; Bastuck, Thomas; Priwisch, Martin
Conference Paper
2015Kontinuierliche Fertigung von Mehrlagen-Mikrosystemen
Brecher, Christian; Baum, Christoph; Priwisch, Martin; Bastuck, Thomas
Conference Paper
2015Leichtbau-Produktion mit flexibler Anlagentechnik
Brecher, C.; Werner, D.; Emonts, M.
Journal Article
2015Mass customization of high performance composites with low investment costs
Brecher, Christian; Buschhoff, Clemens; Janssen, Henning; Emonts, Michael
Conference Paper
2015Maximizing coupling-efficiency of high-power diode lasers utilizing hybrid assembly technology
Zontar, D.; Dogan, M.; Fulghum, S.; Müller, T.; Haag, S.; Brecher, C.
Conference Paper
2015Menschliche Ersatzteile in Leichtbauweise
Brecher, Christian; Emonts, Michael; Brack, Alexander
Journal Article
2015Mikro-Profile aus Faserverbundkunststoffen
Brecher, Christian; Emonts, Michael; Wasiak, Christian
Journal Article
2015Minimal-effort planning of active alignment processes for beam-shaping optics
Haag, S.; Schranner, M.; Müller, T.; Zontar, D.; Schlette, C.; Losch, D.; Brecher, C.; Rossmann, J.
Conference Paper
2015Multi-Material-Head. Novel laser-assisted tape, prepred and dryfiber placement system
Brecher, Christian; Emonts, Michael; Werner, Daniel
Presentation
2015Optische Kunststoffkomponenten für die LED-Beleuchtung
Brecher, Christian; Simone, Daniel de; Meiers, Bernd; Krappig, Reik; Baum, Christoph
Journal Article
2015Simultaneous power and beam-shape optimization of an OPSL resonator
Haag, S.; Sauer, S.; Garlich, T.; Seelert, W.; Brecher, C.; Müller, T.; Zontar, D.
Conference Paper
2015Strategies for precision adhesive bonding of micro-optical systems
Müller, T.; Venu, V.K.; Haag, S.; Zontar, D.; Sauer, S.; Wenzel, C.; Brecher, C.
Conference Paper
2015Unidirectional fiber reinforced tapes as energy director for the ultrasonic welding of thermoplastic composites
Brecher, Christian; Buschhoff, Clemens; Emonts, Michael
Presentation
2015Vernetzung von Arbeitsvorbereitung und Fertigung
Brecher, C.; Lohse, W.; Königs, M.
Journal Article
2015Virtual commissioning of automated micro-optical assembly
Schlette, C.; Losch, D.; Haag, S.; Zontar, D.; Roßmann, J.; Brecher, C.
Conference Paper
2014Accuracy enhancement of five-axis machining by controller based compensation
Brecher, C.; Flore, J.; Behrens, J.; Wenzel, C.
Conference Paper
2014Auf dem Weg zur selbstüberwachenden Werkzeugmaschine
Brecher, C.; Fey, M.; Gsell, S.; Hennes, N.; Hestermann, J.O.; Höper, B.; Krella, C.; Lohse, W.; Lubnau, F.; Prust, D.; Wille, H.
Conference Paper
2014Calculation of the tooth root load carrying capacity of beveloid gears
Brecher, Christian; Brumm, Markus; Henser, Jannik
Journal Article
2014Double sided irradiation for laser-assisted shearing of ultra high strength steels with process integrated hardening
Brecher, C.; Emonts, M.; Eckert, M.; Weinbach, M.
Conference Paper, Journal Article
2014Drive internal setpoint calculation for fast axes
Lindemann, D.; Brecher, C.; Wenzel, C.
Conference Paper
2014Efficient processes for continuous fiber-reinforced thermoplastics
Brecher, Christian; Kermer-Meyer, Alexander; Emonts, Michael
Abstract
2014Effizient zum lnterieur
Brecher, Christian; Werner, Daniel; Emonts, Michael; Steinmayer, Marc
Journal Article
2014Effizienzsteigerung bei der PKD-Bearbeitung
Brecher, Christian; Klocke, Fritz; Mattfeld, Patrick; Schindler, Florestan; Emonts, Michael; Janssen, Andreas; Hermani, Jan-Patrick; Storms, Thomas
Journal Article
2014Elemente der Werkzeugmaschinen
Brecher, Christian; Weck, Manfred; Schmidt, S.; Epple, A.; Krömer, M.
Book Article
2014Engineering of automated assembly of beam-shaping optics
Haag, S.; Sinhoff, V.; Müller, T.; Brecher, C.
Conference Paper
2014Enhanced tool cutting edge detection for ultra precision diamond machining applying a conventional setting system
Reiser, W.; Brecher, C.; Wenzel, C.; Ellinghaus, J.M.
Conference Paper
2014Evaluationsassistenz für die NC-Bearbeitungsplanung komplexer Fräsprozesse
Lohse, Wolfram
: Brecher, Christian; Klocke, Fritz; Schmitt, Robert; Schuh, Günther
Dissertation
2014Fabrication of the magnetic circuit for the BIPM watt balance
Ellinghaus, Jan M.; Arneson, Dave; Brecher, Christian; Wenzel, Christian; Knapp, Byron; Kiss, Adrien; Lavergne, Thomas; Stock, Michael
Conference Paper
2014Flexible & automated production of composite parts
Brecher, C.; Kermer-Meyer, A.; Emonts, M.
Conference Paper
2014The future of thermoplastic composites - an application roadmap
Schuh, G.; Brecher, C.; Graw, M.; Kermer-Meyer, A.
Journal Article
2014Herausforderungen bei der messtechnischen Untersuchung von Werkzeugmaschinen
Brecher, C.; Brockmann, B.; Daniels, M.; Wennemer, M.
Journal Article
2014Herstellung von belastungsoptimierten thermoplastischen Faserverbundbauteilen
Brecher, C.; Emonts, M.; Kermer-Meyer, A.; Janssen, H.; Werner, D.
Book Article
2014Improvement of the design method for helical gears by considering manufacturing related bias errors
Brecher, Christian; Brumm, Markus; Hellmann, M.
Conference Paper
2014Improvement of the excitation behavior of bevel gears considering tolerance fields caused by manufacturing and assembly processes
Brecher, Christian; Brumm, Markus; Knecht, P.
Conference Paper
2014Integrated tool-chain concept for automated micro-optics assembly
Haag, S.; Müller, T.; Pallasch, C.; Brecher, C.
Conference Paper
2014Integrative Produktion : Industrie 4.0, Aachener Perspektiven. Tagungsband
: Brecher, Christian
Conference Proceedings
2014Laser roughing of PCD
Brecher, C.; Emonts, M.; Hermani, J.-P.; Storms, T.
Conference Paper, Journal Article
2014Laser-Assisted Sheet Metal Working by the Integration of Scanner System Technology into a Progressive Die
Brecher, C.; Emonts, M.; Eckert, M.
Conference Paper
2014Laser-Assisted Tape Placement of Customized Hybrid Fiber-Reinforced Thermoplastic Components
Brecher, C.; Emonts, M.; Stimpfl, J.; Kermer-Meyer, A.
Poster
2014Local simulation of the specific material removal rate for generating gear grinding
Brecher, Christian; Klocke, Fritz; Brumm, Markus; Hübner, F.
Conference Paper
2014Mikrostrukturen für autarke Systeme der Zellkultivierung
Brecher, Christian; Ellinghaus, Jan Moritz; Fleger, Markus; Holzer, Matthias; Meiers, Bernd; Wald, Christian; Wenzel, Christian
Journal Article
2014Mit Kunststoff in die optische Zukunft
Hopmann, C.; Brecher, C.; Loosen, P.; Röbig, M.; Meiers, B.; Berens, M.
Journal Article
2014Multi-material-head
Werner, D.; Emonts, M.; Brecher, C.
Journal Article
2014Multi-Material-Head: Modulares und laserunterstütztes Tapelegesystem
Werner, Daniel; Emonts, Michael; Brecher, Christian
Journal Article
2014New concepts and materials for the manufacturing of MR-compatible guide wires
Brecher, C.; Emonts, M.; Brack, A.; Wasiak, C.; Schütte, A.; Krämer, N.; Bruhn, R.
Journal Article
2014Optimierung fertigungsbedingter Grenzschichten
Brecher, Christian; Brumm, Markus; Greschert, R.
Journal Article
2014Präzisionsfertigung: Mit Kunststoff in die optische Zukunft
Hopmann, C.; Brecher, C.; Loosen, P.; Röbig, M.; Meiers, B.; Berens, M.
Journal Article
2014Production of customized hybrid fiber-reinforced thermoplastic composite components using laser-assisted tape placement
Brecher, C.; Emonts, M.; Stimpfl, J.; Kermer-Meyer, A.
Conference Paper
2014Realer Nutzen aus virtuellen Produktionsmaschinen
Brecher, Christian; Beck, E.; Bock, G.; Broos, A.; Epple, A.; Fey, M.; Fischer, A.; Herfs, Werner; Klement, R.; Lohse, Wolfram; Özdemir, D.; Wagner, P.
Conference Paper
2014Robust adhesive precision bonding in automated assembly cells
Müller, T.; Haag, S.; Bastuck, T.; Gisler, T.; Moser, H.; Uusimaa, P.; Axt, C.; Brecher, C.
Conference Paper
2014Sensorgestützte, adaptive Montage
Brecher, C.; Bartscher, S.; Haag, S.; Hardt, J.; Kuolt, H.; Müller, T.; Patron, C.; Wenzel, C.; Winter, A.
Conference Paper
2014Test methodology to determine excitation levels of gears in gear boxes
Brecher, Christian; Brumm, Markus; Hesse, J.; Hellmann, M.
Conference Paper
2014Toolchain concept for the automated assembly of micro-optical systems
Haag, S.; Müller, T.; Brecher, C.
Conference Paper
2014Unterstützung für die Inbetriebnahme von Montagerobotern
Brecher, Christian; Ecker, C.; Storms, T; Lohse, Wolfram
Journal Article
2014Validation of the tooth root load carrying capacity calculation of beveloid gears with parallel axes
Brecher, C.; Brumm, M.; Henser, J.
Conference Paper
2014Validierung der allgemeinen, FE-basierten Zahnkontaktanalyse
Brecher, Christian; Brumm, Markus; Knecht, P.; Henser, Jannick
Conference Paper
2014Verfahren zum Betrieb einer Greifvorrichtung sowie elektrostatische Greifvorrichtung
Ozolin, Boris; Werner, Daniel; Emonts, Michael; Brecher, Christian
Patent
2014Virtualisierung und Vernetzung in Produktionssystemen
Brecher, C.; Behnen, D.; Brumm, M.; Carl, C.; Ecker, C.; Herfs, W.; Klement, R.; Königs, M.; Komma, T.; Lohse, W.; Malik, A.; Müller, S.; Özdemir, D.
Conference Paper
20135D precision process monitoring
Brecher, C.; Lindemann, D.; Merz, A.; Wenzel, C.
Conference Paper
2013Adaptive measurement solution for the dynamic flexibility of machine tools
Kosub, T.; Hannig, S.; Brecher, C.; Bäumler, S.; Daniels, M.
Conference Paper
2013Analyse der Achsgenauigkeit in Abhängigkeit von Servoverstärker und Messsystem
Lindemann, D.; Brecher, C.; Wenzel, C.
Conference Paper
2013Analysis of mutual influences of control, feedback and servo drive systems for ultra precision machining
Brecher, C.; Lindemann, D.; Wenzel, C.
Conference Paper
2013Automated assembly of VECSEL components
Brecher, C.; Pyschny, N.; Haag, S.; Mueller, T.
Conference Paper
2013Automated Manufacturing of Fiber-Reinforced Thermoplastic 3D-Lightweight Components
Brecher, C.; Emonts, M.; Dubratz, M.; Kermer-Meyer, A.
Conference Paper
2013CO2-laser-assisted processing of glass fiber-reinforced thermoplastic composites
Brecher, C.; Emonts, M.; Schares, R.L.; Stimpfl, J.
Conference Paper
2013CO2-laser-assisted production of hybrid fiber-reinforced thermoplastic composites
Brecher, C.; Emonts, M.; Stimpfl, J.
Conference Paper
2013Comparison of local approaches for the evaluation of tooth root load carrying capacity of beveloid gears
Brecher, Christian; Brumm, Markus; Henser, Jannik
Conference Paper
2013Comprehensive calibration of robots and large machine tools using high precision laser-multilateration
Brecher, C.; Behrens, J.; Flore, J.; Wenzel, C.
Conference Paper
2013Design and optimization of flexure-based micromanipulator for optics alignment
Brecher, C.; Pyschny, N.; Bastuck, T.
Conference Paper
2013Desktop Mikromontagezelle für Automatisierte Präzisionsmontagen Optischer Komponenten
Brecher, C.; Haag, M.; Müller, T.; Haag, S.; Pyschny, N.; Härer, S.
Conference Paper
2013Deterministic polishing of smooth and structured molds
Klocke, F.; Brecher, C.; Brinksmeier, E.; Behrens, B.; Dambon, O.; Riemer, O.; Schulte, H.; Tuecks, R.; Wächter, D.; Wenzel, C.; Zunke, R.
Book Article
2013Economic production of load-optimized thermoplastic composites
Brecher, C.; Kermer-Meyer, A.; Janssen, H.; Werner, D.; Emonts, M.
Journal Article
2013Fiber-reinforced plastics enable new prospects for minimal invasive devices and interventions
Brecher, C.; Emonts, M.; Schütte, A.; Brack, A.
Conference Paper
2013Finishing of polycrystalline diamond tools by combining laser ablation with grinding
Brecher, Christian; Klocke, Fritz; Schindler, Florestan; Janssen, Andreas; Fischer, Bettina; Hermani, Jan-Patrick
Journal Article
2013Freeform machining of molds for replication of plastic optics
Brecher, C.; Lindemann, D.; Merz, M.; Wenzel, C.; Preuß, W.
Book Article
2013Grinding of monocrystalline diamond
Brecher, C.; Sobotka, A.; Wenzel, C.
Conference Paper
2013Handling of preforms and prepregs for mass production of composites
Brecher, C.,; Emonts, M.; Ozolin, B.,; Schares, R.
Conference Paper
2013Herstellung von belastungsoptimierten thermoplastischen Faserverbundbauteilen
Brecher, C.; Emonts, M.; Kermer-Meyer, A.; Janssen, H.; Werner, D.
Journal Article
2013Implementation of advanced alignment algorithms for high precision optical components
Brecher, C.; Mueller, T.; Pyschny, N.; Haag, S.
Conference Paper
2013In-process measurement of machine structure deformation and compensation of resulting work piece inaccuracies
Brecher, Christian; Flore, Jakob; Klatte, Michel; Wenzel, Christian
Conference Paper
2013Influences of feedback and servo drive systems on the performance of ultra precision machine axes
Lindemann, D.; Brecher, C.; Wenzel, C.
Conference Paper
2013Laser-assisted sheet metal working in series production
Brecher, C.; Emonts, M.; Eckert, M.
Conference Paper
2013Laserunterstützte Blechbearbeitung
Brecher, Christian; Emonts, Michael; Eckert, Markus
Journal Article
2013Micro-Pullwinding - An Automated Production Technology for Medical Devices
Brecher, Christian; Emonts, Michael; Brack, Alexander; Eckert, Markus
Conference Paper
2013Nutzwertanalyse integrierter Bearbeitungszentren: Integrierte Fertigung in mehreren Arbeitsräumen - Gewichtung und Bewertung von Aufwand und Nutzen
Brecher, C.; Schuh, G.; Breitbach, T.; Bohl, A.; Bois-Reymond, F. du
Journal Article
2013Process and machining system for optical surfaces
Brecher, C.; Gotthardt, T.; Wenzel, C.
Conference Paper
2013Prozesskalibrierung steigert Zerspanleistung: Kompakte Messeinheit und kombinierte Mess- und Berechnungssoftware erlauben schnelle Vorhersage der Prozessstabilität
Brecher, C.; Daniels, M.; Hannig, S.; Kosub, T.; Surico, M.
Journal Article
2013Simulation und Optimierung der doppelspindligen Fräsbearbeitung
Brecher, C.; Epple, A.; Bäumler, S.; Trofimov, Y.
Journal Article
2013Ein STEP- und STEP-NC-basiertes PLM-System
Brecher, Christian; Königs, M.; Lohse, Wolfram
Journal Article
2013System technology for laser-assisted milling with tool integrated optics
Hermani, J.-P.; Emonts, M.; Brecher, C.
Conference Paper
2013Systematic analysis and identification of 5-axis machining accuracy
Brecher, C.; Flore, J.; Wenzel, C.
Conference Paper
2013Systematic analysis of 5-axis machine error budgets: Decreasing the calibration effort without decreasing the machining accuracy
Brecher, C.; Flore, J.; Wenzel, C.
Conference Paper
2013Ein Tapelegekopf für mehrere FVK-Halbzeuge
Brecher, C.; Emonts, M.; Werner, D.
Journal Article
2013Ultra precision process monitoring
Brecher, C.; Lindemann, D.; Merz, A.; Wenzel, C.
Conference Paper
2013Ultraprecision and micro machine tools for micro cutting
Brecher, C.; Wenzel, C.
Book Article
2012Advanced integrated machine control for fast tool assisted ultra precision machining
Brecher, C.; Zavelberg, M.; Lindemann, D.; Buß, C.; Wenzel, C.
Conference Paper
2012Automated alignment of optical components for high-power diode lasers
Brecher, C.; Pyschny, N.; Haag, S.; Guerrero Lule, V.
Conference Paper
2012Customized solutions for laser-assisted tape placement
Brecher, Christian; Kermer-Meyer, Alexander; Werner, Daniel; Stimpfl, Joffrey; Janssen, Henning; Emonts, Michael
Journal Article
2012Demand oriented calibration of 5-axis machine tools
Brecher, C.; Flore, J.; Wenzel, C.; Radermacher, C.
Conference Paper
2012Drahtlose Messung im Hochdrehzahlbereich
Brecher, C.; Rossaint, J.; Hörger, W.
Journal Article
2012Efficient calibration of five-axis machine tools based on a systematic error budget analysis
Brecher, C.; Flore, J.; Haag, S.; Wenzel, C.
Conference Paper
2012Elektrostatische Greifer für textile Halbzeuge
Brecher, C.; Emonts, M.; Ozolin, B.
Journal Article
2012High precision, fast and flexible calibration of robots and large multi-axis machine tools
Brecher, Christian; Flore, Jakob; Haag, Sebastian; Wenzel, Christian
Conference Paper
2012Influences of control, feedback and servo drive systems on precision machining
Brecher, C.; Lindemann, D.; Wenzel, C.
Conference Paper
2012Integrated machine control strategy for fast tool ultra precision machining
Brecher, C.; Lindemann, D.; Wenzel, C.
Conference Paper
2012Integrative product and process design for self-optimising assembly
Brecher, C.; Loosen, P.; Müller, R.; Pyschny, N.; Pavim, A.; Vette, M.; Malik, A.; Fayzullin, K.; Haag, S.
Book Article
2012Integrative production technology for high-wage countries
: Brecher, C.
Book
2012Integrative Production Technology for High-wage Countries
Brecher, Christian; Jeschke, Sabina; Schuh, Günther; Aghassi, Susanne; Arnoscht, Jens; Bauhoff, Fabian; Fuchs, Sascha; Jooß, Claudia; Karmann, Wilhelm Oliver; Kozielski, Stefan; Orilski, Simon; Richert, Anja; Roderburg, Andreas; Schiffer, Michael; Schubert, Johannes; Stiller, Sebastian; Tönissen, Stefan; Welter, Florian
Book Article
2012Integrative Produktionstechnik für Hochlohnländer
Brecher, C.
Conference Paper
2012Integrative simulation of machine tool and manufacturing technology
Klocke, F.; Brecher, C.; Glasmacher, L.; Minoufekr, M.; Lohse, W.; Cabral, G.F.; Rasim, M.; Triebs, J.; Bäumler, S.; Bergs, T.; Herfs, W.; Wegner, H.
Book Article
2012Investigation of ultra-precision turning using aerostatic and hydrostatic spindles
Ahmar, E.; Brecher, C.; Wenzel, C.; Arneson, D.
Conference Paper
2012Laser-assisted milling of difficult-to-machine materials
Brecher, C.;; Emonts, M.; Rosen, C.J.; Hermani, J.P.
Conference Paper
2012Laser-assisted sheet metal working by the integration of scanner system technology into a progressive die
Brecher, C.; Emonts, M.; Eckert, M.
Conference Paper, Journal Article
2012Laserunterstützte Fräsbearbeitung. Prozessergebnisse zum laserunterstützten Fräsen der Nickelbasislegierung Inconel 718
Brecher, C.; Rosen, C.-J.; Emonts, M.; Hermani, J.-P.
Journal Article
2012Laserunterstütztes Fiber Placement
Brecher, C.; Werner, D.; Kermer-Meyer, A.; Emonts, M.
Journal Article
2012Local injection compression molding for resource efficient replication of free form polymer optics
Brecher, C.; Buß, C.; Kolb, P.; Wenzel, C.
Conference Paper
2012Machine integrated, direct measuring devices for the compensation of thermal deformation
Brecher, Christian; Flore, Jakob; Klatte, Michel; Merz, A.; Wenzel, Christian
Conference Paper
2012Machine Integrated, Robust Direct Measuring Devices for the Compensation of Thermal Deformation
Brecher, Christian; Flore, Jakob; Klatte, Michel; Wenzel, Christian
Conference Paper
2012Micro-pull-winding and micro-pultrusion
Brecher, C.; Emonts, M.; Brack, A.; Schütte, A.
Journal Article
2012Micromanipulators for a flexible automated assembly of micro optics
Brecher, C.; Pyschny, N.; Haag, S.; Guerrero Lule, V.
Conference Paper
2012Mikrostrukturierte, lokal-funktionale Oberflächen für hocheffiziente Beleuchtungssysteme
: Brecher, C.
Report
2012Modular hydrostatic axes systems
Brecher, C.; Sobotka, A.; Klatte, M.; Fritz, M.
Conference Paper
2012NC-unterstützte Prozessprogrammierung für das scannerbasierte Laserauftragschweißen
Brecher, C.; Do-Khac, D.; Fischer, B.; Lohse, W.; Wegener, M.
Journal Article
2012New calculation method for ultrasonic systems and application for machining optical freeform-surfaces on steel with diamond
Brecher, C.; Hannig, Sophia
Presentation
2012OPTI(K)MUM
Lindemann, D.; Brecher, C.; Wenzel, C.
Journal Article
2012Preform manufacturing and handling for the mass production of composites
Brecher, C.; Emonts, M.; Ozolin, B.; Schnabel, A.; Greb, C.
Conference Paper
2012Robot-based resistance soldering of optical components
Gatej, A.; Pyschny, N.; Loosen, P.; Brecher, C.
Journal Article
2012Scanner-based laser cladding
Klocke, F.; Brecher, C.; Wegener, M.; Heinen, D.; Fischer, B.; Do-Khac, D.
Conference Paper, Journal Article
2012Schnelle Auslegungsmethode für ultraschallunterstützte Zerspanung
Hannig, S.; Brecher, C.; Wenzel, C.
Journal Article
2012Self-optimizing approach for automated laser resonator alignment
Brecher, C.; Schmitt, R.; Loosen, P.; Guerrero, V.; Pyschny, N.; Pavim, A.; Gatej, A.
Journal Article
2012Shortening process chains by process integration into machine tools
Brecher, C.; Klocke, F.; Arntz, K.; Bäumler, S.; Breitbach, T.; Do-Khac, D.; Emonts, M.; Heinen, D.; Herfs, W.; Hermani, J.; Janssen, A.; Karlberger, A.; Rosen, C.
Book Article
2012A simple yet comprehensive approach to the testing of machine tools with arbitrary axis configurations
Brecher, C.; Flore, J.; Schwenke, H.; Wissmann, M.; Wenzel, C.
Conference Paper
2012Technology roadmapping for production in high-wage countries
Brecher, C.; Jeschke, S.; Schuh, G.; Aghassi, S.; Arnoscht, J.; Bauhoff, F.; Fuchs, S.; Jooß, C.; Karmann, O.; Kozielski, S.; Orilski, S.; Richert, A.; Roderburg, A.; Schiffer, M.; Schubert, J.; Stiller, S.; Tönissen, S.; Welter, F.
Book Article
2012Universal approach for machine tool testing independent of axis configuration
Brecher, C.; Flore, J.; Wenzel, C.; Schwenke, H.
Conference Paper
2012WGP-Summer School Megatrends und Ihre Auswirkungen auf die Produktionstechnik
: Brecher, C
Conference Proceedings
2011Analysis of control and servo drive systems for the application in ultra precision machining
Brecher, C.; Lindemann, D.; Zavelberg, M.; Wenzel, C.
Conference Paper
2011Automated alignment of laser resonators
Brecher, C.; Pyschny, N.; Guerrero, V.
Conference Paper
2011Automation of the alignment process of a solid state laser resonator
Brecher, C.; Pyschny, N.; Guerrero, V.
Conference Paper
2011Automatisierte Justage von CO2-Laserstrahlführungssystemen
Brecher, Christian; Emonts, Michael; Stimpfl, Joffrey; Müller, Juliane
Journal Article
2011Business and technology cases
Brecher, C.; Kampker, A.; Klocke, F. et al.
Book Article
2011Corrective machining of freeform molds for mass replication
Brecher, C.; Buß, C.; Kolb, P.; Wenzel, C.
Conference Paper
2011Corrective polishing of complex ceramics geometries
Klocke, F.; Brecher, C.; Zunke, R.; Tuecks, R.
Journal Article
2011Diamond machining of nano structures using an automated work piece referencing and alignment procedure
Brecher, C.; Weinzierl, M.; Wenzel, C.
Conference Paper
2011Dynamische Anforderungen bei achsredundantem Laserschneiden
Brecher, C.; Do-Khac, D.; Herfs, W.; Vitr, M.
Journal Article
2011Erweiterung des Einsatzbereiches von Spindellagern durch Modifikation der Rillengeometrie
Brecher, C.; Spachtholz, G.; Rossaint, J.
Journal Article
2011Feedback of measurement data for corrective machining of freeform surfaces
Brecher, C.; Wenzel, C.; Buß, C.; Clemens, J.
Conference Paper
2011Fertigen von Mikrostrukturen erfordert spezielle Prozessführung
Brecher, C.; Wenzel, C.; Matrose, A.; Niehaus, F.
Journal Article
2011Flexible assembly robotics for self-optimizing production
Haag, S.; Pyschny, N.; Brecher, C.
Conference Paper
2011Flexible Oberflächenbearbeitung durch scannerbasierte Systemtechnik
Brecher, Christian; Emonts, Michael; Rosen, Chris-Jörg; Heinen, Daniel
Journal Article
2011Gemeinsamkeiten und Unterschiede der Prozess- und Fertigungstechnik
Mersch, H.; Behnen, D.; Schmitz, D.; Epple, U.; Brecher, C.; Jarke, M.
Journal Article
2011Howtool - Verfahrensübergreifende Technologieplanung. Nutzung betriebsmittel- und aufgabenbezogenen Wissens bei der NC-Planung
Brecher, C.; Servos, M.; Malik, A.; Vitr, M.; Imbusch, K.
Journal Article
2011A hybrid machining center for enabling new die manufacturing and repair concepts
Brecher, C.; Klocke, F.; Breitbach, T.; Do-Khac, D.; Heinen, D.; Karlberger, A.; Rosen, C.-J.
Journal Article
2011Innovative manufacturing of 3D-lightweight components
Brecher, Christian; Dubratz, Markus; Stimpfl, Joffrey; Emonts, Michael
Journal Article
2011Integrative Produktionstechnik für Hochlohnländer
: Brecher, C.
Book
2011Integrative Produktionstechnik für Hochlohnländer
Brecher, C.; Jeschke, S.; Schuh, G.; Aghassi, S.; Arnoscht, J.; Bauhoff, F.; Fuchs, S.; Jooß, C.; Karmann, W.; Kozielski, S.; Orilski, S.; Richert, A.; Roderburg, A.; Schiffer, M.; Schubert, J.; Stiller, S.; Tönissen, S.; Welter, F.
Book Article
2011Integrative Simulation von Werkzeugmaschine und Fertigungstechnologie
Brecher, Christian; Klocke, Fritz; Lohse, Wolfram; Cabral, Gustavo Francisco; Rasim, Matthias; Triebs, Johannes; Minoufekr, Meysam; Bäumler, Stephan; Bergs, Thomas; Herfs, Werner; Glasmacher, Lothar; Wegner, Hagen
Book Article
2011Integratives Produkt- und Prozessdesign für die selbstoptimierende Montage
Brecher, C.; Loosen, P.; Müller, R.; Schmitt, R.; Fayzullin, K.; Haag, S.; Malik, A.; Pavim, A.; Pyschny, N.; Vette, M.
Book Article
2011Integrierte Steuerungstechnik für die Ultrapräzssionsbearbeitung
Brecher, C.; Lindermann, D.; Buss, C.; Zavelberg, M.; Merz, A.; Wenzel, C.
Conference Paper
2011Interferometrische Messung von Freiform-Schneidkanten auf einer Diamantwerkzeug-Bearbeitungsmaschine
Berger, R.; Fleischle, D.; Körner, K.; Lyda, W.; Osten, W.; Sobotka, A.; Wenzel, C.; Brecher, C.
Journal Article
2011Laser-assisted milling of advanced materials
Brecher, C.; Emonts, M.; Rosen, C.-J.; Hermani, J.-P.
Conference Paper, Journal Article
2011Laser-assisted sheet metal working of high strength steels in serial production
Brecher, C.; Emonts, M.; Eckert, M.
Conference Paper, Journal Article
2011Load-optimised tailored thermoplastic FRP blanks for mass production
Brecher, C.; Stimpfl, J.; Kermer-Meyer, A.; Dubratz, M.; Emonts, M.
Journal Article
2011New process and device for minimal invasive surgical suturing
Schütte, A.; Brecher, C.; Emonts, M.; Pyschny, N.
Journal Article, Conference Paper
2011Potentials of combining different manufacturing techniques in one machine for ultra precision machining
Brecher, C.; Wenzel, C.; Ellinghaus, J.M.
Conference Paper
2011Schwingung erleichtert den Abtrag. Superfinishen: Ultraschall verbessert Produktivität beim Bearbeiten zylindrischer Präzisionsbauteile
Brecher, Christian; Hannig, Sophia; Tawakoli, Taghi
Journal Article
2011Self-optimization as an enabler for flexible and reconfigurable assembly systems
Müller, R.; Brecher, C.; Corves, B.; Esser, M.; Riedel, M.; Haag, S.; Vette, M.
Conference Paper
2011Self-optimization of robot-based resistance soldering for the assembly of optical elements in solid-state laser systems
Gatej, A.; Pyschny, N.; Morasch, V.; Loosen, P.; Brecher, C.
Conference Paper
2011Self-optimizing assembly of laser systems
Loosen, Peter; Schmitt, Robert; Brecher, Christian; Müller, Rainer; Funck, Max; Gatej, Alexander; Morasch, Valentin; Pavim, Alberto; Pyschny, Nicolas
Journal Article
2011Self-optimizing flexible assembly systems
Schmitt, R.; Loosen, P.; Brecher, C.; Pavim, A.; Funck, M.; Morasch, V.; Gatej, A.; Pyschny, N.; Haag, S.
Journal Article
2011Ultraschall steigert Produktivität beim Zerspanen harter Werkstoffe
Brecher, C.; Wenzel, C.; Hannig, S.
Journal Article
2011Universelles Maschinensystem für Prozessuntersuchungen zum Schleifen und Läppen von monokristallinen Diamantwerkzeugen
Brecher, C.; Sobotka, A.
Book Article
2011Verkürzung von Prozessketten durch Verfahrensintegration in Werkzeugmaschinen
Brecher, Christian; Bäumler, Stephan; Breitbach, Tobias; Do-Khac, Dennis; Herfs, Werner; Karlberger, Andreas; Klocke, Fritz; Arntz, Kristian; Heinen, Daniel; Emonts, Michael; Hermani, Jan-Patrick; Janssen, Andreas
Book Article
2010Adaptronik in Schleifmaschinen. Prozessregelung über hochdynamische Aktoreinheiten
Brecher, C.; Guralnik, A.; Hannig, S.; Klein, W.
Conference Paper
2010Analysis of the injection overmoulding process for polymer lenses by use of a specially designed mould
Brecher, C.; Kolb, P.; Wenzel, C.
Conference Paper
2010Compact design for high precision machine tools
Brecher, C.; Utsch, P.; Klar, R.; Wenzel, C.
Journal Article
2010Design of transversal ultrasonic systems
Brecher, Christian; Hannig, Sophia
Presentation
2010Design of Ultrasonic Systems
Brecher, Christian; Hannig, Sophia
Presentation
2010Development of a force controlled orbital polishing head for free form surface finishing
Brecher, C.; Tuecks, R.; Zunke, R.; Wenzel, C.
Journal Article
2010Development of a membrane based polishing tool
Brecher, C.; Tücks, R.; Wenzel, C.
Conference Paper
2010Echtzeit-Synchronisation von Laser- und Zerspanungsprozess: Prozesssteuerung für die laserunterstützte Fräsbearbeitung
Brecher, C.; Rosen, C.-J.; Lindemann, D.; Emonts, M.
Journal Article
2010Flexible scanner-based laser surface treatment
Klocke, F.; Brecher, C.; Heinen, D.; Rosen, C.-J.; Breitbach, T.
Conference Paper, Journal Article
2010Flexure-based 6-axis alignment module for automated laser assembly
Brecher, C.; Pyschny, N.; Behrens, J.
Conference Paper
2010FPGA based control system for coupled highly dynamic axes in ultra-precision machining
Brecher, C.; Lindemann, D.; Merz, M.; Niehaus, F.; Wenzel, C.; Zavelberg, M.
Conference Paper
2010FPGA-based control system for highly dynamic axes in ultra-precision machining
Brecher, C.; Lindemann, D.; Merz, M.; Wenzel, C.
Conference Paper
2010Gemeinsamkeiten und Unterschiede in der Modellierung von prozesstechnischen und diskreten Produktionsanlagen
Behnen, D.; Mersch, H.; Quix, C.; Schmilz, D.; Zhang, M.; Fayzullin, K.; Brecher, C.; Epple, U.; Jarke, M.
Conference Paper
2010Gezielte Prozessführung zur Vermeidung von Kurzwelligkeiten beim Außenrund-Einstechschleifen
Brecher, C.; Klein, W.; Bäumler, S.
Journal Article
2010Hochglänzende Freiformflächen auf Stahlwerkzeugen
Klocke, F.; Brecher, C.; Zunke, R.; Tücks, R.; Zymla, C.; Driemeyer Wilbert, A.
Journal Article
2010Hochglänzende Freiformflächen auf Stahlwerkzeugen
Brecher, C.; Klocke, F.; Zunke, R.; Tücks, R.; Zymla, C.; Driemeyer Wilbert, A.
Journal Article
2010Hybrid servo control system for highly dynamic axes
Brecher, C.; Merz, M.; Lindemann, D.; Zavelberg, M.
Conference Paper
2010Innovative fast tool servo system using mass compensation and damping system
Brecher, C.; Niehaus, F.; Matrose, A.; Merz, M.; Zavelberg, M.; Wenzel, C.
Conference Paper
2010Intelligent CO2 beam guiding
Brecher, C.; Stimpfl, J.; Emonts, M.
Conference Paper, Journal Article
2010Intelligente Lasersystemtechnik
Stimpfl, Joffrey; Brecher, Christian; Emonts, Michael
Journal Article
2010iTool design of a diamond grinding and lapping machine
Brecher, C.; Sobotka, A.; Wenzel, C.
Conference Paper
2010Laser-assisted milling of advanced materials
Brecher, C.; Rosen, C.-J.; Emonts, M.
Conference Paper, Journal Article
2010Laser-assisted shearing of stainless steel and spring steel plates with the use of a laser scanner system - new hybrid production technology for the sheet metal industry
Emonts, M.; Brecher, C.
Conference Paper
2010Laser-assisted shearing: New application for high-power diode lasers
Emonts, M.; Brecher, C.
Conference Paper
2010Laser-assisted shearing: New process developments for the sheet metal industry
Brecher, C.; Emonts, M.
Journal Article
2010Laser-assisted tape laying is moving forward to 3D
Brecher, C.; Kermer-Meyer, A.; Steyer, M.; Dubratz, M.; Emonts, M.
Journal Article
2010Laser-assisted thermoplastic tape laying
Brecher, C.; Kermer-Meyer, A.; Steyer, M.; Dubratz, M.; Emonts, M.
Journal Article
2010Leicht für große Lasten
Brecher, C.; Schlang, J.; Steyer, M.; Emonts, M.
Journal Article
2010Mehrachsige laserunterstützte Fräsbearbeitung
Brecher, C.; Rosen, C.-J.; Bausch, S.
Journal Article
2010Modular and generic control software system for scalable automation
Brecher, C.; Freundt, M.; Schöllhorn, D.
Conference Paper
2010New approaches for an automated production in ultra-precision machining
Brecher, C.; Weinzierl, M.
Conference Paper, Journal Article
2010New systematic and time-saving procedure to design cup grinding wheels for the application of ultrasonic-assisted grinding
Brecher, C.; Schug, R.; Weber, A.; Wenzel, C.; Hannig, S.
Conference Paper, Journal Article
2010Nickel-Phosphor-Beschichtung für die Diamantzerspanung
Brecher, C.; Kolb, P.; Wenzel, C.
Conference Paper
2010Pneumatic driven positioning and alignment system for the assembly of hybrid microsystems
Brecher, C.; Freundt, M.; Wenzel, C.
Conference Paper
2010Production of next generation backlight units by adaptive step and repeat embossing
Baum, C.; Brecher, C.; Wenzel, C.; Niehaus, F.; Rinko, K.
Conference Paper
2010Prozessauslegung beim Laserstrahlunterstützten Stanzen
Grden, Martin; Sakklettibutra, Jens; Vollertsen, Frank; Johnigk, Carsten; Emonts, Michael; Brecher, Christian; Eckert, Markus
Journal Article
2010Prozesssteuerung für die laserunterstützte Fräsbearbeitung
Brecher, C.; Rosen, C.-J.; Lindemann, D.; Emonts, M.
Journal Article
2010Prozesssteuerung für laserunterstützte Fräsbearbeitung
Brecher, C.; Rosen, C.-J.; Lindemann, D.; Emonts, M.
Journal Article
2010Relevante Dämpfungseffekte in Strukturbauteilen für Werkzeugmaschinen
Brecher, C.; Kunc, M.; Klein, W.H.
Journal Article
2010Schweißen statt Knoten
Brecher, Christian; Schütte, Adrian; Pyschny, Nicolas
Journal Article
2010Thermoplastische Organobleche für die Großserie
Brecher, C.; Kermer-Meyer, A.; Dubratz, M.; Emonts, M.
Journal Article
2010Ultraschallunterstütztes Superfinishing von zylindrischen Präzisionsbauteilen. Kurzbezeichnung: Sofi
Tawakoli, T.; Brecher, C.; Junghanns, L.; Clemens, J.; Böhm, J.; Güntert, G.
Report
2010Wettbewerbsvorteile im Werkzeugmaschinenbau
Brecher, C.; Karlberger, A.; Herfs, W.
Journal Article
2010Zuverlässige Produktionsanlage (ZuPro)
Brecher, C.
Report
2009'iTool' - Process and design considerations for innovative diamond tool making
Brecher, Christian; Utsch, Philip; Sobotka, Andreas; Wenzel, Christian
Conference Paper
20095-Achs-Kompaktschleifmaschine "MiniGrind". Hochpräzise 5-Achs-Bearbeitung für den Mikroformenbau
Brecher, C.; Utsch, P.; Wenzel, C.
Journal Article
2009Automated mass production of fibre-reinforced components
Steyer, M.; Dubratz, M.; Schütte, A.; Wenzel, C.; Brecher, C.
Journal Article
2009Automation of a diode laser assembly process
Brecher, C.; Freundt, M.; Wenzel, C.
Conference Paper
2009Control of advanced tool alignment system in an ultra precision lathe
Panarase, D.; Meo, F.; Surico, M.; Brecher, C.; Niehaus, F.
Conference Paper
2009Design of passive alignment structures for the batch alignment of micro components
Brecher, C.; Weinzierl, M.
Conference Paper
2009Development and characterization of high volume producible micro structured surfaces for tissue engineering applications
Brecher, C.; Wenzel, C.; Pretzsch, F.; Büth, H.; Kluger, P.J.
Conference Paper
2009Development of a force controlled orbital polishing spindle
Brecher, C.; Wenzel, C.; Tücks, R.; Zunke, R.
Conference Paper
2009Development of a high precision self-adjusting laser mirror module
Brecher, C.; Wenzel, C.; Stimpfl, J.; Emonts, M.
Conference Paper
2009Diamantzerspanung mit mehr Dynamik
Brecher, C.; Niehaus, F.; Merz, M.; Wenzel, C.
Journal Article
2009Entwicklung eines aktiven Montagekopfs für die Mikromontage mit herkömmlichen Handhabungsgeräten
Freundt, M.; Brecher, C.; Wenzel, C.
Conference Paper
2009Five-axes accuracy enhancement by compact and integral design
Brecher, C.; Utsch, P.; Wenzel, C.
Journal Article
2009Flexibel automatisierte Montagesysteme
Müller, Rainer; Esser, Martin; Janßen, Christian; Brecher, Christian; Pyschny, Nicolas
Conference Paper
2009Fräsen von Hochleistungskeramik
Brecher, C.; Rosen, C.J.; Wenzel, C.; Bausch, S.
Journal Article
2009Glatt geschnitten, ganz normal
Brecher, C.; Emonts, M.
Journal Article
2009Hybride Fertigung für Hochlohnländer
Brecher, C.; Breitbach, T.; Do-Khac, D.; Heinen, D.; Herfs, W.; Karlberger, A.; Klein, W.; Rosen, C.-J.
Journal Article
2009Hybride Fräsbearbeitung hochfester Werkstoffe
Brecher, Christian; Rosen, Chris-Jörg
Journal Article
2009Integral design axis for the accuracy enhancement of ultraprecision machine tools
Brecher, C.; Utsch, P.; Wenzel, C.
Conference Paper
2009Laser-assisted thermoplastic tape-laying systems
Brecher, C.; Dubratz, M.; Steyer, M.; Schütte, A.; Emonts, M.; Wenzel, C.
Journal Article
2009Laserunterstütztes Scherschneiden hochfester Blechwerkstoffe
Brecher, C.; Emonts, M.
Journal Article
2009Machine and process development for the robust machining of microstructures on free-form surfaces for hybrid optics
Brecher, C.; Merz, M.; Niehaus, F.; Richterich, C.; Rinko, K.; Schalle, E.; Schmidt, K.; Stautner, K.; Stautner, M.; Ventura-Traveset, A.; Zavelberg, M.
Report
2009Mehrschrittiges Mikroheißprägen
Brecher, C.; Baum, C.; Schauerte, G.
Journal Article
2009Methode zur systematischen Auslegung von Werkzeugen für das ultraschallunterstützte Schleifen
Brecher, C.; Wenzel, C.; Hannig, S.; Schug, R.; Weber, A.
Conference Paper
2009Metrology data feedback for shrinkage compensated polymer lenses
Brecher, C.; Schmitt, R.; Buß, C.; Kolb, P.; Wenzel, C.; Köllmann, D.
Conference Paper
2009Micro structuring of large surfaces by means of step and repeat hot embossing
Brecher, C.; Baum, C.; Schauerte, G.; Pretzsch, F.; Tücks, R.
Conference Paper
2009Microscale mass production
Brecher, C.; Weinzierl, M.; Niehaus, F.; Schmitt, R.; Köllmann, D.
Journal Article
2009New materials for magnetic resonance imaging (MRI) - fiber-reinforced guide wires and catheters for minimal invasive interventions
Schütte, Adrian; Brecher, Christian; Steyer, Martin; Krüger, Sascha; Krombach, Gabriele A.
Conference Paper
2009One-step alignment of bulk micro components
Brecher, C.; Weinzierl, M.
Conference Paper
2009Optimierung des thermischen Verhaltens von Fräsmaschinen
Brecher, C.; Wissmann, A.
Journal Article
2009Passive Justagestrukturen zur parallelen Handhabung von Mikrokomponenten
Brecher, C.; Weinzierl, M.
Conference Paper
2009Production of gratings by means of step and repeat hot embossing
Brecher, C.; Baum, C.; Rinko, K.; Schauerte, G.
Conference Paper
2009Production of optical components by means of step and repeat hot embossing
Brecher, C.; Baum, C.; Schauerte, G.
Conference Paper
2009Segmentation and selective alignment of measurement data for optical surfaces
Schmitt, R.; Brecher, C.; Köllmann, D.; Buß, C.
Conference Paper
2009Self-optimising flexible assembly systems
Brecher, C; Pyschny, N.; Loosen, P.; Funck, M.; Morasch, V.; Schmitt, R.; Pavim, A.
Book Article
2009Systemtechnik zum Fräsen hochfester Werkstoffe
Brecher, C.; Rosen, C.-J.
Journal Article
2009Ultraprecise 5-axis machining by compact, integral design
Brecher, C.; Utsch, P.; Wenzel, C.
Conference Paper
2009UPControl - Entwicklung eines Prozessüberwachungssystems für die Prozesse der Präzisions- und Ultrapräzisionsfertigung
Sobotka, A.; Brecher, C.
Report
2008Adaptronisches Bohrwerkzeug
Brecher, C.; Schauerte, G.
Book Article
2008Aufforderung zum Parallelschwung
Brecher, C.; Klocke, F.; Schmitt, R.; Schuh, G.
Journal Article
2008Characterization and optimization of the dynamic tool path of a highly dynamic micro milling machine
Brecher, C.; Wenzel, C.; Klar, R.
Conference Paper
2008Characterization and optimization of the dynamic tool path of a highly dynamic micromilling machine
Brecher, C.; Wenzel, C.; Klar, R.
Journal Article
2008Corrective polishing of complex ceramics geometries
Klocke, F.; Brecher, C.; Zunke, R.; Tücks, R.
Conference Paper
2008Development of a dynamic high precision compact milling machine
Klar, R.; Brecher, C.; Wenzel, C.
Conference Paper
2008Development of a force controlled polishing tool
Brecher, C.; Wenzel, C.; Tücks, R.
Conference Paper
2008ERA-NET OPTICALSTRUCT - Machining microstructures on free-form surfaces
Brecher, C; Niehaus, F.; Merz, M.; Schmidt, K.
Conference Paper
2008Faserverbundproduktion im Wandel der Zeit
Brecher, C.; Dubratz, M.; Steyer, M.
Journal Article
2008Finishing complex surfaces with zonal polishing tools
Klocke, F.; Brecher, C.; Zunke, R.; Tuecks, R.
Conference Paper
2008Finite element analysis of glass moulding
Klocke, F.; Dambon, O.; Pongs, G.; Wang, F.; Brecher, C.; Winterschladen, M.
Journal Article
2008Flexibel automatisierte Montage von Festkörperlasern
Schmitt, R.; Pavim, A.; Brecher, C.; Pyschny, N.; Loosen, P.; Funck, M.; Dolkemeyer, J.; Morasch, V.
Journal Article
2008Freiformoptiken für die Beleuchtungstechnik von Morgen. Ultrapräzisionstechnik mit Fast-Tool-Servo-Systemen
: Brecher, C.; Merz, M.
Book
2008Hybrid micro tri-point gripper with integrated alignment functionality
Freundt, M.; Brecher, C.; Klar, R.
Conference Paper
2008Hybrid universal handling systems for micro component assembly
Freundt, M.; Brecher, C; Wenzel, C.
Conference Paper, Journal Article
2008Hybride Systemtechnik für die werkzeugmaschinenintegrierte Lasermaterialbearbeitung
Brecher, C.; Rosen, C.-J.; Breitbach, T.
Journal Article
2008Hybrides Bearbeitungszentrum für den Werkzeug- und Formenbau
Brecher, C.; Breitbach, T.; Hoffmann, F.; Karlberger, A.; Do-Khac, D.; Rosen, C.J.
Journal Article
2008In-situ interferometric form testing for adaptive mold finishing
Schmitt, R.; Brecher, C.; Vielhaber, K.; Tücks, R.; Merz, M.
Conference Paper
2008Integral design for a high precision rotary-axis system
Brecher, C.; Utsch, P.
Conference Paper
2008Integrative Produktionstechnik für Hochlohnländer
Brecher, C.; Schmitt, R.; Klocke, F.; Schuh, G.
Journal Article
2008Intelligentes Bohrwerkzeug für die Herstellung und Strukturierung von Präzisionsbohrungen mit großen Durchmessern, iBo
Brecher, C.
Report
2008KombiMasch - Hybride Werkzeugmaschine zur Verkürzung der Prozesskette
Brecher, C.; Klocke, F.; Wenzel, C.; Emonts, M.; Frank, J.
Journal Article
2008LaserPunch - Entwicklung eines laserunterstützten Scherschneidverfahrens
Brecher, C; Emonts, M.
Journal Article
2008Manufacturing and replication of cell aligning micro structures
Brecher, C.; Klar, R.; Pretzsch, F.; Wenzel, C.
Conference Paper
2008Manufacturing of devices for the parallel precision alignment of multiple micro components
Brecher, C.; Weinzierl, M.
Conference Paper
2008Micro structure surface functionalisation for tissue engineering applications - A systematic integrated approach towards high volume production
Brecher, C.; Wenzel, C.; Klar, R.; Pretzsch, F.
Conference Paper
2008Microstructuring of free-form surfaces by the use of a hybrid fast-tool-servo system
Brecher, C.; Merz, M.; Niehaus, F.; Wenzel, C.
Conference Paper
2008Mikrostrukturierung von Freiformflächen
Brecher, C.; Niehaus, F.; Merz, M.; Wenzel, C.
Journal Article
2008Model based control of a piezo-actuated axis
Brecher, C.; Schauerle, G.; Merz, M.
Conference Paper
2008Modular laser integration into machine tools
Brecher, C.; Klocke, F.; Emonts, M.; Frank, J.
Conference Paper
2008Multi-technology platform for hybrid metal processing
Brecher, C.; Hoffmann, F.; Karlberger, A.; Rosen, C.J.
Conference Paper
2008Neue Anwendungsbereiche adaptronischer Systeme
: Brecher, C.
Book
2008Optikfertigung. Treiber für die Präzisionstechnik
Brecher, C.; Marschall, D.; Mayer, R.; Merz, M.; Niehaus, F.; Schneider, G.; Schreiber, P.; Weinzierl, M.; Wenzel, C.
Conference Paper
2008Optimising form accuracy in maching arrays of optically functional surfaces
Brecher, C.; Niehaus, F.; Merz, M.; Wenzel, C.
Conference Paper
2008Parallel precision alignment of multiple micro components
Brecher, C; Weinzierl, M.
Conference Paper, Journal Article
2008Pneumatic positioning system for precision assembly
Freundt, M.; Brecher, C; Wenzel, C.; Pyschny, N.
Conference Paper
2008PreciGrind - Präzisionsschleifmaschine mit Magnetlagerspindel zur integrierten Prozessanalyse
Schäfer, C.; Zunke, R.; Brecher, C.
Report
2008Schneller durch Thermoplasteinsatz. Laserunterstütztes Tapewickeln durch Thermoplasteinsatz
Brecher, C.; Dubratz, M.; Steyer, M.
Journal Article
2008Simulation of plunge centerless grinding processes
Brecher, C.; Hannig, S.
Journal Article
2008Sub-micron palletizing system for micro- and ultraprecision machining
Brecher, C.; Weinzierl, M.; Rashid, A.
Conference Paper
2008Sub-micron referencing system for ultra precision machining processes
Brecher, C.; Weinzierl, M.; Schmitt, R.; Köllmann, D.; Rashid, A.
Conference Paper
2008Sub-micron referencing system for ultraprecision machining processes
Brecher, C.; Weinzierl, M.; Rashid, A.; Schmitt, R.; Köllmann, D.
Conference Paper
2008Technical advances in ultra-precision machining of freeform optics by function-oriented testing
Brecher, C.; Schmitt, R.; Köllmann, D.; Merz, M.
Conference Paper
2008Technologie der Zukunft: Laserunterstütztes Fiber Placement
Dubratz, Markus; Brecher, Christian; Wenzel, Christian
Journal Article
2008Thermoplastics speed up winding process
Dubratz, M.; Steyer, M.; Brecher, C.
Journal Article
2008Ultrapräzisionsdrehmaschine zur direkten Herstellung von optischen Freiformflächen im Bereich der medizinischen und technischen Optiken
Brecher, C.; Merz, M.; Walter, P.; Kirschkamp, T.
Report
2008Verfahren und Messsystem zur Erfassung thermisch oder mechanisch bedingter Verlagerung an Werkzeugmaschinen
Schauerte, G.; Brecher, C.; Wenzel, C.
Patent
2008Verfahrensintegration macht Fräsmaschine zu hybridem Bearbeitungszentrum
Brecher, C.; Rosen, C.-J.; Breitbach, T.; Karlberger, A.
Journal Article
2008Wettbewerbsfaktor Produktionstechnik - Aachener Perspektiven. Tagunsband
: Brecher, C.; Klocke, F.
Conference Proceedings
2007Adaptronisches Bohrwerkzeug - Piezoaktorische Zusatzachsen zur Kompensation von Bohrwerkzeugschwingungen
Brecher, C.; Schauerte, G.
Journal Article
2007Adaptronisches Bohrwerkzeug. Piezoaktorische Zusatzachsen kompensieren Bohrwerkzeugschwingungen
Brecher, C.; Schauerte, G.
Journal Article
2007Design and manufacture of a carbon fibre spindle rotor - Project results "Aerospin - development of a highly precise spindle prototype"
Brecher, C.; Schug, R.; Schmitz, S.; Börner, U.
Journal Article
2007Development and design of compact high precision machine tools
Brecher, C.; Klar, R.; Wenzel, C.
Journal Article
2007Development and design of compact high precision machine tools
Klar, R.; Wenzel, C.; Brecher, C.
Conference Paper
2007Development of a dynamic high precision miniature milling machine
Brecher, C.; Klar, R.; Wenzel, C.
Conference Paper
2007Dynamic long axis for ultra-precision machining of optical linear structures
Brecher, C.; Baum, C.; Winterschladen, M.; Wenzel, C.
Journal Article
2007Effiziente Großserienfertigung von Aggregatebauteilen für die Automobilindustrie
Brecher, C.; Zeidler, D.
Journal Article
2007Entwicklung und Aufbau einer Miniatur-Bearbeitungsmaschine. Abschlussbericht
Klar, R.; Brecher, C.
Report
2007Führungsdraht für Interventionen im Magnet- Resonanz-Tomographen
Brecher, C.; Schmitz, S.; Krüger, S.
Journal Article
2007Guide wire for intervention using magnetic-resonance tomography
Brecher, C.; Schmitz, S.; Krüger, S.
Journal Article
2007Hält Vergleich mit Stahl stand
Brecher, C.; Schmitz, S.
Journal Article
2007Hybride Fertigungszelle für die Dreh-, Fräs- und Laserbearbeitung
Brecher, C.; Wenzel, C.; Emonts, M.; Frank, J.
Journal Article
2007Hybrides, laserunterstütztes Scherschneidverfahren
Brecher, C.; Wenzel, C.; Emonts, M.
Journal Article
2007Hybrides, universell einsetzbares Handhabungssystem zur Montage von Mikrobauteilen
Freundt, M.; Brecher, C.; Wenzel, C.
Conference Paper
2007Innovative Magnetlager für den Einsatz in linearen Vorschubachsen: berührungslos und trotzdem unnachgiebig
Schmidt, A.; Brecher, C.; Possel-Dölken, F.
Journal Article
2007Integrative Produktionstechnik für Hochlohnländer
Brecher, C.; Schuh, G.; Possel-Dölken, F.; Orilski, S.
Conference Paper
2007IntiBo - Intelligent adaptronic drilling tool
Brecher, C.; Schauerte, G.
Conference Paper
2007LaserPunch - eine hybride Laser-Stanz-Technologie
Brecher, C.; Emonts, M.
Journal Article
2007LaserPunch - Steigerung der Leistungsfähigkeit von Stanzmaschinen durch laserunterstütztes Scherschneiden
Brecher, C.; Wenzel, C.; Emonts, M.
Journal Article
2007Minimalinvasive Punktionsnadel aus Kunststoff
Brecher, C.; Schmitz, S.
Journal Article
2007Modeling and simulation of adaptronic drilling tool axes as the basis of control design
Brecher, C.; Schauerte, G.; Merz, M.
Journal Article
2007New approaches for an automised production in ultraprecision machining
Brecher, Christian; Weinzierl, Martin
Conference Paper
2007New systematic and time-saving procedure to design complex shaped tools for the application of ultrasonic assisted grinding
Brecher, C.; Schug, R.; Weber, A.; Wenzel, C.
Conference Paper
2007New systematic and time-saving procedure to design cup grinding wheels for the application of ultrasonic assisted grinding
Brecher, C.; Schug, R.; Weber, A.; Wenzel, C.
Conference Paper
2007Optimisation of servo control for highly dynamic axes for ultra precision freeform machining
Brecher, C.; Merz, M.; Wenzel, C.
Conference Paper
2007Parallele passive Justage in der automatisierten Mikromontage
Brecher, C.; Weinzierl, M.; Wenzel, C.
Conference Paper
2007Positionier- und Justagesystem für die Montage hybrider Mikrosysteme
Freundt, M.; Brecher, C.; Wenzel, C.
Conference Paper
2007Simulation of dynamic effects on hydrostatic bearings and membrane restrictors
Brecher, C.; Baum, C.; Winterschladen, M.; Wenzel, C.
Journal Article
2007Simulationstechnologien für virtuelle Werkzeugmaschinen
Großmann, K.; Rudolph, H.; Brecher, C.; Hoffmann, F.
Journal Article
2007Ultrapräzises 5-Achs-Schleifen auf kleinstem Raum
Brecher, C.; Utsch, P.; Wenzel, C.
Journal Article
2007Ultrapräzision- eine Frage der Einstellung
Brecher, C.; Niehaus, F.
Journal Article
2007Ultraprecise compact five-axes grinding machine
Brecher, C.; Utsch, P.; Wenzel, C.
Conference Paper
2007Verfahren und Vorrichtung zur spanenden Bearbeitung von Werkstuecken aus Glas oder Glaskeramik
Brecher, C.; Emonts, M.; Lange, S.C.; Weck, M.
Patent
2007Zuverlässigkeit und Diagnose in der Produktion
Brecher, Christian; Verl, Alexander
: Krüger, Joachim (Hrsg.); Uhlmann, Eckart Gunter (Hrsg.)
Book
2006Active and passive tool alignment in ultraprecision machining for the manufacturing of highly precise structures
Brecher, C.; Weinzierl, M.; Lange, S.C.; Peschke, C.
Journal Article
2006Alignment techniques for the high precision assembly of hybrid microsystems
Brecher, C.; Freundt, M.; Lange, S.; Weinzierl, M.
Conference Paper
2006Ausrüstungen für die Herstellung großflächig funktionell mikrostrukturierter Oberflächen
Brecher, C.; Lange, S.C.; Wenzel, C.; Niehaus, F.; Widemann, R.
Conference Paper
2006Automated tool exchange for ultraprecision diamond milling and turning applications
Brecher, C.; Lange, S.; Niehaus, F.; Wenzel, C.
Conference Paper
2006Development of a compression molding process for three-dimensional tailored free-form glass optics
Yi, A.Y.; Huang, C.; Klocke, F.; Brecher, C.; Pongs, G.; Winterschladen, M.; Demmer, A.; Lange, S.; Bergs, T.; Merz, M.; Niehaus, F.
Journal Article
2006Development of a dynamic linear axis for machining of groove structures
Brecher, C.; Winterschladen, M.; Lange, S.; Merz, M.; Klar, R.
Conference Paper
2006Development of a dynamic long axis for ultra-precision machining of groove structures
Brecher, C.; Winterschladen, M.; Lange, S.; Merz, M.; Klar, R.
Conference Paper
2006Development of passive alignment techniques for the assembly of hybrid microsystems
Brecher, C.; Weinzierl, M.; Lange, S.C.
Conference Paper
2006Finite element analysis of the micro glass moulding process
Brecher, C.; Winterschladen, M.; Lange, S.; Klocke, F.; Pongs, G.; Wang, F.
Conference Paper
2006Fünfachsige Hartbearbeitung im Werkzeugbau
Klocke, F.; Brecher, C.; Arntz, K.; Meinecke, M.
Conference Paper
2006Großflächige Mikrostrukturierung
Brecher, C.; Schmitt, R.; Lange, S.C.; Koerfer, F.; Niehaus, F.; Widemann, R.
Journal Article
2006Kinematic influences on the formation of the footprint during local polishing of steel
Brecher, C.; Wenzel, C.; Lange, S.C.
Journal Article
2006Komplettbearbeitung - Fräsen, Drehen und Lasern in einer Maschine
Brecher, Christian; Deutges, Dominic; Emonts, Michael; Frank, Jörg; Lange, Sven Carsten
Journal Article
2006Kürzere Prozessketten durch Verfahrenskombination
Brecher, Christian; Emonts, Michael; Frank, Peter
Journal Article
2006Methods for highly accurate gripping of flexible micro parts
Brecher, C.; Peschke, C.
Conference Paper, Journal Article
2006A model driven approach to engineering of flexible manufacturing system control software
Brecher, C.; Buchner, T.; Cheng, Y.; Jarke, M.; Schmitz, D.
Conference Paper
2006Multi-axes micro gripper for the handling and alignment of flexible micro parts
Brecher, C.; Peschke, C.; Freundt, M.; Lange, S.
Conference Paper
2006NURBS based ultra-precision free-form machining
Brecher, C.; Lange, S.; Merz, M.; Niehaus, F.; Wenzel, C.; Winterschladen, M.; Weck, M.
Conference Paper
2006NURBS based ultra-precision free-form machining
Brecher, C.; Lange, S.; Merz, M.; Niehaus, F.; Wenzel, C.; Winterschladen, M.
Journal Article
2006Off-axis machining of NURBS free-form surfaces by fast tool servo assisted turning
Brecher, C.; Lange, S.; Merz, M.; Niehaus, F.; Winterschladen, M.
Journal Article
2006Off-axis machining of NURBS freeform surfaces by fast tool servo assisted turning
Brecher, C.; Merz, M.; Niehaus, F.; Winterschladen, M.; Lange, S.
Journal Article
2006Off-axis machining of NURBS freeform surfaces by fast tool servo system
Brecher, Christian; Lange, Sven Carsten; Merz, Michael; Niehaus, Frank; Winterschladen, Markus
Conference Paper
2006Optimierte Schleifprozesstechnologien durch den Einsatz einer magnetisch gelagerten Werkzeugspindel
Brecher, C.; Klocke, F.; Reinschke, K.; Rudolph, J.; Schäfer, C.; Dambon, O.; Zunke, R.
Journal Article
2006Production processes and applications for the passive alignment of microcomponents
Brecher, C.; Lange, S.; Peschke, C.; Weinzierl, M.; Spanier, G.; Mokwa, W.
Conference Paper, Journal Article
2006Ultraschallunterstütztes Hartdrehen für die Fertigung von gehärteten Präzisionsstahlbauteilen
Brecher, C.; Klocke, F.; Heselhaus, M.; Winterschladen, M.
Journal Article
2005Adaptiver Polierkopf zur Bearbeitung von Freiformflächen in optischer Qualität
Brecher, C.; Wenzel, C.
Book Article
2005Adaptronisches Bohrwerkzeug zur Feinbearbeitung von Zylinderhülsen
Brecher, C.; Schauerte, G.; Lange, S.
Journal Article
2005Aerospin - aerostatisch, synchron und hochgenau
Brecher, C.; Mayer, A.; Schug, R.; Slotta, G.; Thaler, W.
Journal Article
2005Approach to a machine-integrated measurement and simulation tool for the manufacturing of ultra precise surfaces
Weck, M.; Pfeifer, T.; Brecher, C.; Schmitt, R.; Dörner, D.; Winterschladen, M.
Journal Article
2005Automatischer Werkzeugwechsel
Schmitt, R.; Brecher, C.; Koerfer, F.; Niehaus, F.
Journal Article
2005Greifer und Montagemaschinen
Brecher, C.; Peschke, C.
Book Article
2005Handhabung und aktive Justage biegeschlaffer Mikrobauteile
Brecher, C.; Peschke, C.
Conference Paper
2005Hochgenaue optische Freiformflächen - schnell gefertigt
Brecher, Christian; Winterschladen, Markus; Lange, Sven; Merz, Michael
Journal Article
2005Inspiriert von der Natur - Automatisierte Herstellung von funktionell mikrostrukturierten Oberflächen
Brecher, C.; Niehaus, F.
Journal Article
2005Maschinensysteme für die Ultrapräzisionsbearbeitung
Brecher, C.; Lange, S.; Peschke, C.
Conference Paper
2005Montage biegeschlaffer Mikrobauteile
Brecher, C.; Peschke, C.
Journal Article
2005Motorspindeln sind Schlüsselkomponenten
Brecher, C.; Queins, M.; Esser, M.; Voll, H.
Journal Article
2005Precision Manufacturing - Trends, Anwendungen und Beispiele
Brecher, C.; Lange, S.; Schug, R.; Wenzel, C.
Conference Paper
2005Produktionsprozesse und Anwendungen für die passive Justage von Mikrobauteilen
Brecher, C.; Mokwa, W.; Peschke, C.; Spanier, G.
Conference Paper
2005Ultraschalleinsatz - Produktivitätssteigerung bei der Zerspanung von Glas und Keramik
Brecher, C.; Klocke, F.; Schug, R.; Weber, A.
Journal Article
2005Von der Idee bis zur Serie
Brecher, Christian; Kölzer, Patrick; Schmitz, Sebastian; Lange, Sven
Conference Paper
2005Wettbewerbsfaktor Produktionstechnik
: Brecher, C.; Klocke, F.; Schmitt, R.; Schuh, G.
Conference Proceedings
2004Handhabungstechnik für die Mikromontage
Brecher, C.; Peschke, C.
Journal Article
2004Machine tool for the automated repairing of worn-out moulds and dies with integrated 3D-measuring system and an adaptive two-axis-laser-cladding-head
Brecher, C.; Bichmann, S.; Glasmacher, L.; Groll, K.; Kordt, M.
Conference Paper
2004Manufacturing of free-form surfaces in optical quality using an integrated NURBS DATA interface
Brecher, C.; Weck, M.; Winterschladen, M.; Lange, S.; Wetter, O.; Pfeifer, T.; Dörner, D.
Conference Paper
2004Treibertechnologien in Deutschland
Brecher, C.
Journal Article