Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Glas-Chips zur Messung der Wärmeleitfähigkeit
Grosse, C.; Ras, M.A.; May, D.; Wöhrmann, M.; Bader, V.; Bauer, J.; Wunderle, B.
Conference Paper
2019Latest advancements towards delamination detection in a FCOB assembly using Thermal Pixel (Thixel) array
Kumar, A.; Schulz, M.; Bader, V.; Wöhrmann, M.; Bauer, J.; May, D.; Puri, A.; Abo Ras, M.; Wunderle, B.
Conference Paper
2019Numerische und experimentelle Betrachtung des Molded Underfills
Paetsch, M.; Nguyen, T.D.; Dreissigacker, M.; Bauer, J.; Hoelck, O.; Bader, V.; Braun, T.; Zuehlke, J.; Minkus, M.; Voges, S.; Becker, K.-F.; Woehrmann, M.; Lang, K.-D.; Schubert, D.W.; Schneider-Ramelow, M.
Conference Paper
2018Delamination Detection in an Electronic Package by Means of a Newly Developed Delamination Chip Based on Thermal Pixel (Thixel) Array
Kumar, A.; Schulz, M.; Sheva, S.; Keller, J.; Bader, V.; Wöhrmann, M.; Bauer, J.; May, D.; Wunderle, B.
Conference Paper
2018Spatially Resolved, Non-Destructive in-situ Detection of Interface Degradation by Remote Electrical Readout of an on-chip Thermal Pixel (Thixel) Matrix
Wunderle, B.; May, D.; Ras, M.A.; Grosse, C.; Wöhrmann, M.; Bader, V.; Keller, J.
Conference Paper
2017Zuverlässigkeitsauslegung eines piezoelektrischen Energy Harvesters
Wittler, Olaf; Hölck, Ole; Benecke, Stephan; Dobs, Tom; Dijk, Marius van; Keller, Jürgen; Schulz, Marcus; Bader, Volker; Braun, Tanja; Lang, Klaus-Dieter
Conference Paper
2016Abschätzung der Zyklenfestigkeit von elektrischen Durchkontaktierungen thermisch beanspruchter Leiterplatten mit Hilfe experimenteller und simulativer Methoden
Walter, Hans; Broll, M.; Dijk, M. van; Schneider-Ramelow, M.; Bader, V.; Wittler, O.; Lang, K.-D.
Conference Paper
2016Ensuring system reliability of a piezoelectric energy harvester
Wittler, O.; Hölck, O.; Benecke, S.; Dobs, T.; Dijk, M. van; Keller, J.; Schulz, M.; Bittner, P.; Schlosser, I.; Vergara, F.; Yacoub, T.; Bader, V.; Braun, T.; Lang, K.-D.
Conference Paper
2016Foldable fan-out wafer level packaging
Braun, T.; Becker, K.-F.; Raatz, S.; Minkus, M.; Bader, V.; Bauer, J.; Aschenbrenner, R.; Kahle, R.; Georgi, L.; Voges, S.; Wöhrmann, M.; Lang, K.-D.
Conference Paper
2015From fan-out wafer to fan-out panel level packaging
Braun, Tanja; Becker, Karl-Friedrich; Raatz, Stefan; Bader, Volker; Bauer, Jochen; Aschenbrenner, Rolf; Voges, Steve; Thomas, Tina; Kahle, Ruben; Lang, Klaus-Dieter
Conference Paper
2015Large area compression molding for Fan-out Panel Level Packing
Braun, Tanja; Raatz, Stefan; Voges, Steve; Kahle, Ruben; Bader, Volker; Bauer, Jörg; Becker, Karl-Friedrich; Thomas, Tina; Aschenbrenner, Rolf; Lang, Klaus-Dieter
Conference Paper
201424"×18" fan-out panel level packing
Braun, Tanja; Becker, Karl-Friedrich; Voges, Steve; Bauer, Jörg; Kahle, Ruben; Bader, V.; Thomas, Tina; Aschenbrenner, Rolf; Lang, Klaus-Dieter
Conference Paper
2014Challenges and opportunities for Fan-out Panel Level Packaging (FOPLP)
Braun, Tanja; Becker, Karl-Friedrich; Voges, Steve; Thomas, Tina; Kahle, Ruben; Bader, Volker; Bauer, Jörg; Aschenbrenner, Rolf; Lang, Klaus-Dieter
Conference Paper
2014Fan-out wafer level packaging for MEMS and sensor applications
Braun, Tanja; Becker, Karl-Friedrich; Jung, Erik; Voges, Steve; Thomas, Tina; Kahle, Ruben; Bader, Volker; Bauer, Jörg; Aschenbrenner, Rolf; Lang, Klaus-Dieter
Conference Paper
2014Impact of RDL Polymer on Reliability of Flip Chip Interconnects in Thermal Cycling - Correlation of Experiments with Finite Element Simulations
Müller, Matthias; Wöhrmann, Markus; Wittler, Olaf; Bader, Volker; Töpper, Michael; Lang, Klaus-Dieter
Conference Paper
2013Panel level packaging for LED lighting
Braun, T.; Bauer, J.; Becker, K.-F.; Kahle, R.; Bader, V.; Voges, S.; Jordan, R.; Aschenbrenner, R.; Lang, K.D.
Conference Paper
2013Transfer molding compounds for power electronic applications - a qualification methodology for HT capable materials
Braun, Tanja; Becker, K.-F.; Koch, M.; Thomas, T.; Amende, T.; Schreier-Alt, T.; Bader, V.; Bauer, J.; Aschenbrenner, R.; Schneider-Ramelow, M.; Lang, K.-D.
Conference Paper
2012Large area mold embedding technology with PCB based redistribution
Braun, T.; Becker, K.-F.; Böttcher, L.; Ostmann, A.; Jung, E.; Voges, S.; Thomas, T.; Kahle, R.; Bader, V.; Bauer, J.; Aschenbrenner, R.; Schneider Ramelow, M.; Lang, K.-D.
Conference Paper
2012Through mold via technology for multi-sensor stacking
Braun, Tanja; Brundel, Mathias; Becker, Karl-Friedrich; Kahle, Ruben; Piefke, Kathrin; Scholz, U.; Haag, F.; Bader, Volker; Voges, Steve; Thomas, Tina; Aschenbrenner, Rolf; Lang, Klaus-Dieter
Conference Paper
2012Transfer molding technology for smart power electronics modules - materials and processes
Becker, K.-F.; Joklitschke, D.; Braun, T.; Koch, M.; Schreier-Alt, T.; Bader, V.; Bauer, J.; Nowak, T.; Aschenbrenner, R.; Schneider-Ramelow, M.; Thomas, T.; Bochow-Ness, O.; Lang, K.-D.
Conference Paper
2012Transfer molding technology for smart power electronics modules: Materials and processes
Becker, K.-F.; Joklitschke, D.; Braun, T.; Koch, M.; Thomas, T.; Schreier-Alt, T.; Bader, V.; Bauer, J.; Nowak, T.; Bochow-Ness, O.; Aschenbrenner, R.; Schneider-Ramelow, M.; Lang, K.-D.
Journal Article
20113D stacking approaches for mold embedded packages
Braun, Tanja; Becker, Karl-F.; Voges, Steve; Thomas, Tina; Töpper, Michael; Fischer, Thorsten; Kahle, Ruben; Bader, Volker; Bauer, Jörg; Aschenbrenner, Rolf; Lang, Klaus-Dieter
Conference Paper
2011Potential of large area mold embedded packages with pcb based redistribution
Braun, Tanja; Becker, Karl-Friedrich; Böttcher, Lars; Ostmann, Andreas; Jung, Erik; Voges, Steve; Thomas, Tina; Kahle, Ruben; Bader, Volker; Bauer, Jörg; Aschenbrenner, Rolf; Schneider-Ramelow, Martin; Lang, Klaus-Dieter
Conference Paper
2011Through mold vias for stacking of mold embedded packages
Braun, T.; Becker, K.-F.; Voges, S.; Thomas, T.; Kahle, R.; Bader, V.; Bauer, J.; Piefke, K.; Krüger, R.; Aschenbrenner, R.; Lang, K.-D.
Conference Paper
2011Ultra low temperature PBO-polymer for wafer level packaging applications
Töpper, Michael; Fischer, Thorsten; Bader, V.; Lang, Klaus-Dieter; Matsuie, N.; Motobe, T.; Minegishi, T.; Knaus, M.
Conference Paper
2010Nano- und micro sized filler particles for improved humidity resistance of encapsulants
Braun, T.; Bauer, J.; Georgi, L.; Becker, K.-F.; Koch, M.; Thomas, T.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2010Water diffusion in micro- and nano-particle filled encapsulants
Braun, T.; Georgi, L.; Bauer, J.; Koch, M.; Becker, K.-F.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2009Plastic packaging for high temperature applications
Braun, T.; Becker, K.-F.; Bauer, J.; Koch, M.; Bader, V.; Kahle, R.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2008Micro to nano - scaling packaging technologies for future microsystems
Braun, T.; Becker, K.-F.; Bauer, J.; Hausel, F.; Pahl, B.; Wittler, O.; Mrossko, R.; Jung, E.; Ostmann, A.; Koch, M.; Bader, V.; Minge, C.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2008Nano-particle enhanced encapsulants for improved humidity resistance
Braun, T.; Hausel, F.; Bauer, J.; Wittler, O.; Mrossko, R.; Bouazza, M.; Becker, K.-F.; Oestermann, U.; Koch, M.; Bader, V.; Minge, C.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2008Nano-Particle Filled Epoxy Resins with Improved Diffusion Barrier Functionality
Braun, T.; Hausel, F.; Bauer, J.; Wittler, O.; Mrossko, R.; Bouazza, M.; Becker, K.-F.; Oestermann, U.; Koch, M.; Bader, V.; Minge, C.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2007Overmolded FC-SiP for miniaturized devices
Jung, E.; Koch, M.; Becker, K.-F.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2006High-temperature reliability of flip chip assemblies
Braun, T.; Becker, K.-F.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Journal Article
2006Improved reliability of leadfree flip chip assemblies using direct underfilling by transfer molding
Braun, T.; Wunderle, B.; Becker, K.-F.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2006Rapid tooling for high reliability transfer molded devices
Becker, K.-F.; Koch, M.; Gramckow, J.; Braun, T.; Bader, V.; Jung, E.; Lang, K.-D.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2005Chip in duromer technology for system in package realization
Becker, K.-F.; Braun, T.; Neumann, A.; Ostmann, A.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2005Duromer MID technology for system-in-package generation
Becker, K.-F.; Braun, T.; Neumann, A.; Ostmann, A.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.; Jung, E.
Journal Article
2005Film coating - large area encapsulation process for electronics packaging
Becker, K.-F.; Braun, T.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2005Film coatings as an encapsulation process for polymer electronics
Becker, K.-F.; Braun, T.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2005High temperature potential of flip chip assemblies for automotive applications
Braun, T.; Becker, K.-F.; Sommer, J.-P.; Löher, T.; Schottenloher, K.; Kohl, R.; Pufall, R.; Bader, V.; Koch, M.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2005A new wafer level packaging approach: Encapsulation, metallization and laser structuring for advanced system in package manufacturing
Becker, K.-F.; Braun, T.; Neumann, A.; Ostmann, A.; Coko, E.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Journal Article
2005Reliability potential of epoxy based encapsulants for automotive applications
Braun, T.; Becker, K.-F.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2003Flip chip technology for high temperature automotive applications
Braun, T.; Becker, K.-F.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2003Wafer level encapsulation for system in package generation
Braun, T.; Becker, K.-F.; Koch, M.; Bader, V.; Manessis, D.; Neumann, A.; Ostmann, A.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2002Flip chip molding - highly reliable flip chip encapsulation
Braun, T.; Becker, K.F.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2002Flip chip molding - Recent progress in flip chip encapsulation
Braun, T.; Becker, K.F.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2002Wafer level encapsulation - a transfer molding approach to system in package generation
Braun, T.; Becker, K.-F.; Koch, M.; Bader, V.; Oystermann, U.; Manessis, D.; Aschenbrenner, R.; Reichl, H.
Conference Paper
1998Chip size package - the option of choice for miniaturized medical devices
Töpper, M.; Schaldach, M.; Fehlberg, S.; Karduck, C.; Meinherz, C.; Heinricht, K.; Bader, V.; Hoster, L.; Coskina, P.; Kloeser, J.; Ehrmann, O.; Reichl, H.
Conference Paper
1997Bondability of electroless metalfinishes for COB-technology
Ansorge, F.; Bader, V.; Zakel, E.; Reichl, H.
Conference Paper
1997Fluxless die bonding of high power laser bars using the AuSn-metallurgy
Weiß, S.; Bader, V.; Azdasht, G.; Kasulke, P.; Zakel, E.; Reichl, H.
Conference Paper
1997Recent progress in flexible molding and reliability investigation of CSP and BGA-packages using advanced interconnection technology
Becker, K.-F.; Ansorge, F.; Ehrlich, R.; Azdasht, G.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper