Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2016"Divide et Impera?" - Theoretische Perspektiven auf die Collaborative Economy
Gandenberger, Carsten
Report
2016"Lebendige" Oberflächen - smart materials steuern Geometrie und Textur von Wohnwerkzeugen
Kunze, Holger; Meinel, Frithjof; Berzina, Zane
Presentation
201620 Jahre Innenhochdruck-Umformung am Fraunhofer IWU - von der klassischen IHU bis zur in-situ-Fertigung von Hybridbauteilen
Werner, Markus; Albert, Andre; Paul, Alexander
Conference Paper
2016360° video cloud streaming & HTMLVideoElement extensions
Bassbouss, Louay
Presentation
20163D friction stir welding with a cost-efficient machine concept at Fraunhofer IWS
Schulze, Sebastian; Grimm, Andreas; Standfuß, Jens; Beyer, Eckhard
Presentation
20163D-Druck von Metallen als Substitution und Wettbewerb von Gussteilen?
Müller, Bernhard
Presentation
20164.5 kV SiC junction barrier schottky diodes with low leakage current and high forward current density
Schöck, Johannes; Büttner, Jonas; Rommel, Mathias; Erlbacher, Tobias; Bauer, Anton
Poster
20165G channel models in mm-wave frequency bands
Jaeckel, S.; Peter, M.; Sakaguchi, K.; Keusgen, W.; Medbo, J.
Conference Paper
2016Abiotic raw-materials in life cycle impact assessments: An emerging consensus across disciplines
Drielsma, Johannes A.; Allington, Ruth; Brady, Thomas; Guinée, Jeroen; Hammarstrom, Jane; Hummen, Torsten; Russell-Vaccari, Andrea; Schneider, Laura; Sonnemann, Guido; Weihed, Pär
Journal Article
2016An Abraded Surface of Doxorubicin-Loaded Surfactant-Containing Drug Delivery Systems Effectively Reduces the Survival of Carcinoma Cells
Schmidt, Christian; Yokaichiya, Fabiano; Doğangüzel, Nurdan; Dias Franco, Margareth K.K.; Calvacanti, Leide P.; Brown, Mark A.; Alkschbirs, Melissa I.; Araujo, Daniele R. de; Kumpugdee-Vollrath, Mont; Storsberg, Joachim
Journal Article
2016Abschlussbericht zum Forschungsvorhaben: Bundesausbildungsförderungsgesetz - Forschungsstand und Datensätze
Quack, Lara; Kalinowski, Michael
Report
2016Absicherung von komplexen Software-Komponenten vernetzter Fahrzeuge
Weiß, Gereon; Drabek, Christian
Conference Paper
2016Accelerated aging and cure kinetics of butacene® containing composite propellants
Seyidoglu, Tijen; Bohn, Manfred A.; Mußbach, Günter
Conference Paper
2016Accelerating phase unwrapping based on integer linear programming by processing of subgraphs
Even, Markus
Conference Paper
2016Accurate cure modeling for isothermal processing of fast curing epoxy resins
Bernath, Alexander; Kärger, Luise; Henning, Frank
Journal Article
2016Acquiring and processing light deflection maps for transparent object inspection
Meyer, J.; Längle, Thomas; Beyerer, Jürgen
Conference Paper
2016Action recognition in the longwave infrared and the visible spectrum using Hough forests
Hilsenbeck, Barbara; Münch, David; Grosselfinger, Ann-Kristin; Hübner, Wolfgang; Arens, Michael
Conference Paper
2016Activation and mechanochemical breaking of C-C bonds initiate wear of diamond (110) surfaces in contact with silica
Peguiron, A.; Moras, G.; Walter, M.; Uetsuka, H.; Pastewka, L.; Moseler, M.
Journal Article
2016Active and fast charge-state switching of single NV centres in diamond by in-plane Al-Schottky junctions
Schreyvogel, C.; Polyakov, V.; Burk, S.; Fedder, H.; Denisenko, A.; Fávaro de Oliveira, F.; Wunderlich, R.; Meijer, J.; Zürbig, V.; Wrachtrup, J.; Nebel, C.E.
Journal Article
2016Adaptive Software für sicherheitskritische Funktionen in Batterie-elektrischen Fahrzeugen
Rosenthal, Thorsten; Feismann, Timo; Schleiß, Philipp; Weiß, Gereon; Klein, Cornel
Conference Paper
2016Adaptive Software-Architekturen für automatisierte Systeme
Weiß, Gereon; Schleiß, Philipp
Conference Paper
2016Additive Fertigung mit faserverstärkten Werkstoffen - Möglichkeiten, Restriktionen, Potentiale
Fischer, Jonas
Presentation
2016Advanced complexity management strategic recommendations of handling the "Industrie 4.0" complexity for small and medium enterprises
Jäger, Jens; Schöllhammer, Oliver; Lickefett, Michael; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Advanced computed laminography using a priori information
Schorr, Christian; Dörr, Laura; Maisl, Michael
Conference Paper
2016Advanced interpolation cut-cell method for numerically solving continuum granular flow equations
Neusius, David
: Klar, A.; Stockie, J.
Dissertation
2016Advanced steer-by-wire system for worlds longest busses
Wagner, Sebastian; Nitzsche, Gunter
Conference Paper
2016Agiles Service-Engineering für Industrie 4.0: Erster Schritt: Anforderungsanalyse mit Anwendungsfällen
Usländer, Thomas
Conference Paper
2016AGIS: Automated tool detection & hand-arm vibration estimation using an unmodified smartwatch
Matthies, Denys J.C.; Bieber, Gerald; Kaulbars, Uwe
Conference Paper
2016AICC - Automatic Inspection of Cut Carbon
Soutschek, Markus
Conference Paper
2016Aktuelle Trends bei der vorausschauenden Instandhaltung
Wabner, Markus
Presentation
2016Akuelle Trends bei der Prädiktiven Instandhaltung von Umformmaschinen
Wabner, Markus
Presentation
2016AkuProLas: Acoustic inline process monitoring for laser welding applications
Bastuck, Matthias; Herrmann, Hans-Georg; Wolter, Bernd; Böttger, David; Zinn, Peter-Christian
Conference Paper
2016Alternative Inline Analysis of Acidic Etching Baths
Mohr, L.; Dannenberg, T.; Zimmer, M.; Rentsch, J.
Conference Paper
2016Analog-circuit NBTI degradation and time-dependent NBTI variability
Giering, Kay-Uwe; Rott, G.; Rzepa, G.; Reisinger, H.; Puppala, Ajith Kumar; Reich, Torsten; Gustin, W.; Grasser, T.; Jancke, Roland
Conference Paper
2016Analyse der Wärmeentstehung im Antrieb und Temperierung von Strukturen und Antrieben am Beispiel von Werkzeugmaschinen
Winkler, Stefan; Werner, Ralf; Bucht, Andre; Drossel, Welf-Guntram; Weber, Jürgen; Weber Juliane; Voigt, Immanuel
Conference Paper
2016Analyse subjektiver Erhebungsdaten einer Licht- und Raumklimastudie in einer Bildungseinrichtung
Winkler, Manuel H.
: Sedlbauer, Klaus (Hrsg.)
Dissertation
2016Analysis and design of computerized numerical controls for execution on multi-core systems
Vivanco, José María; Keinert, Matthias; Lechler, Armin; Verl, Alexander
Journal Article, Conference Paper
2016Analysis of CIE-color values using the example of tracer munition
Knapp, Sebastian; Bieroth, D.; Kelzenberg, Stefan; Lity, André; Poth, H.; Raab, Angelika; Roth, Evelin; Weiser, Volker
Conference Paper
2016Analysis of grain structure evolution via image processing based on optical measurements of mc Si wafers
Strauch, T.; Demant, M.; Krenckel, P.; Riepe, S.; Rein, S.
Conference Paper
2016Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data
Othmani, Y.; Böhlke, T.; Lube, T.; Fellmeth, A.; Chlup, Z.; Colonna, F.; Hashibon, A.
Journal Article
2016An analytical framework for handling production time variety at workstations of mixed-model assembly lines
Keckl, Stefan; Kern, Wolfgang; Abou-Haydar, A.; Westkämper, Engelbert
Journal Article, Conference Paper
2016Angiopoietin-like protein 4 and cardiovascular function in COPD
Waschki, Benjamin; Kirsten, Anne-Marie; Holz, Olaf; Meyer, T.; Lichtinghagen, R.; Rabe, K.F.; Magnussen, Helgo; Welte, T.; Watz, H.; Janciauskiene, S.
Journal Article
2016Anisoplanatic imaging through turbulence using principal component analysis
Baena-Gallé, Roberto; Gladysz, Szymon; Mateos, Javier
Conference Paper
2016Anomaly Detection using B-spline Control Points as Feature Space in Annotated Trajectory Data from the Maritime Domain
Anneken, Mathias; Fischer, Yvonne; Beyerer, Jürgen
Conference Paper
2016The application center industrie 4.0 - industry-driven manufacturing, research and development
Landherr, Martin; Schneider, Ulrich; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Application of GeV protons for radiation effects testing at COSY
Felden, Olaf; Gebel, Ralf; Höffgen, Stefan Klaus; Metzger, Stefan
Conference Paper
2016Approach for a general pose-dependent model of the dynamic behavior of large lightweight machine tools for vibration reduction
Apprich, Stefanie; Wulle, Frederik; Lechler, Armin; Pott, Andreas; Verl, Alexander
Journal Article, Conference Paper
2016An approach to integrate parameters and indicators of sustainability management into value stream mapping
Edtmayr, Thomas; Sunk, Alexander; Sihn, Wilfried
Journal Article, Conference Paper
2016An approach to unify the appraisal framework for biorefinery systems and first cuts to its application
Suwelack, Kay; Wüst, Dominik
Poster
2016AR-enhanced human-robot-interaction - methodologies, algorithms, tools
Andersson, Nils; Argyrou, Angelos; Nägele, Frank; Ubis, Fernando; Esnaola Campos, Urko; Ortiz de Zarate, Maite; Wilterdink, Robert
Journal Article, Conference Paper
2016Are multi-car households better suited for battery electric vehicles? - Driving patterns and economics in Sweden and Germany
Jakobsson, Niklas; Gnann, Till; Plötz, Patrick; Sprei, Frances; Karlsson, Sten
Journal Article
2016An assessment of experimental techniques for measuring the mode I fracture toughness of UHMW-PE composites
Lässig, Torsten; Nolte, Franziska; Riedel, Werner; May, Michael
Presentation
2016Assessment strategies for composite-metal joining technologies - a review
Jahn, Josefine; Weeber, Max; Böhner, Johannes; Steinhilper, Rolf
Journal Article, Conference Paper
2016Assistenzsysteme für die manuelle Handhabung - Herausforderungen und Trends
Stelzer, Patrick; Kraus, Werner
Presentation
2016Atomic Layer Deposited Molybdenum Oxide for the Hole-Selective Contact of Silicon Solar Cells
Bivour, M.; Macco, B.; Temmler, J.; Kessels, W.M.M.; Hermle, M.
Journal Article, Conference Paper
2016Ausfallsicherheit mit AUTOSAR: Ressourcen neu verteilen
Schleiß, Philipp; Drabek, Christian; Weiß, Gereon
Journal Article
2016Auswirkung von Maschinenschwingungen auf die Zahnradherstellung
Kimme, Simon; Drossel, Welf-Guntram; Decker, Harald; Lührs, Georg-Friedrich
Presentation
2016Auswirkungen der digitalen Revolution auf Wirtschaft und Arbeitswelt, sowie der Einfluss der Nanotechnologie auf diesen Wandel
Kolaric, Ivica
Presentation
2016Automated fault injection for SystemC & SystemC AMS
Gerth, Stephan
Presentation
2016Automated NDT of railway wheels using induction thermography
Ehlen, Andreas; Netzelmann, Udo; Lugin, Sergey; Finckbohner, Michael; Valeske, Bernd; Bessert, Steffen
Conference Paper
2016Automatic optimal motion generation for robotic manufacturing processes: Optimal collision avoidance in robotic welding
Diaz Posada, Julian Ricardo; Dietz, Thomas; Ockert, Philip; Kuss, Alexander; Hägele, Martin; Verl, Alexander
Conference Paper
2016Automatic Programming and Control for Robotic Deburring
Diaz Posada, Julian Ricardo; Kumar, Shivaram; Kuss, Alexander; Schneider, Ulrich; Drust, Manuel; Dietz, Thomas; Verl, Alexander
Conference Paper
2016Automation in the context of stem cell production - where are we heading with Industry 4.0?
Kulik, Michael; Ochs, Jelena; König, Niels; Schmitt, Robert
Journal Article
2016Automation of Industrial Trucks for Flexible Industrial Applications
Albrecht, Thomas
Presentation
2016Automatisierung und Robotik-Systeme
Beckert, Bernd; Buschak, Daniela; Graf, Birgit; Hägele, Martin; Jäger, Angela; Moll, Cornelius; Schmoch, Ulrich; Wydra, Sven
Study
2016Automotive LIDAR sensor development scenarios for harsh weather conditions
Kuttila, Matti; Pyykönen, Pasi; Ritter, Werner; Sawade, Oliver; Schäufele, Bernd
Conference Paper
2016AutoSecSDNDemo: Demonstration of automated end-to-end security in software-defined networks
Khondoker, Rahamatullah; Larbig, Pedro; Senf, Daniel; Bayarou, Kpatcha; Gruschka, Nils
Conference Paper
2016Aviation battery monitoring electronics in lithium-ion based battery systems for electrified sailplanes and aircrafts
Schwarz, R.; Waller, R.; Wenger, M.; Akdere, M.; Neureuther, J.; Gepp, M.; Koffel, S.; Lorentz, V.R.H.; März, M.; Holtsmark, A.; Gribov, V.; Lange, A.
Conference Paper
2016Axiomatic approach to flexible and changeable production system design
Foith-Förster, Petra; Wiedenmann, Marc; Seichter, Daniel; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Axiomatic design approach for human-robot collaboration in flexibly linked assembly layouts
Fechter, Manuel; Foith-Förster, Petra; Pfeiffer, Marc Sascha; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Battery roadmap for electric mobility 2030
Thielmann, Axel
Presentation
2016BeadTRAP als Integrationsbaustein für Personalisierte Medizin
Scheuermann, Stefan; Dimitriadis, Nikolas; Reis, Christian
Presentation
2016Bearbeitung großer Werkstücke mit mobilen Werkzeugmaschinen
Rentzsch, Hendrik
Presentation
2016Ein Beitrag zur Beurteilung der Schwingfestigkeit von Großgussbauteilen aus Gusseisen mit Kugelgraphit mit besonderer Berücksichtigung der Auswirkungen von Lunkern auf die Bauteillebensdauer
Bleicher, Christoph G.H.
Dissertation
2016Berechnung von Eigenspannungen in Mehrlagenrohrschweißverbindungen und Quantifizierung des Einflusses auf die Lebensdauer bei Schwingbeanspruchung
Hempel, Nico; Nitschke-Pagel, Thomas; Dilger, Klaus; Moroz, Sergii; Varfolomeev, Igor
Report
2016Berührungslose Messung von Vitalparametern des Herzens
Kroschel, K.; Ruckhäberle, Martin
Conference Paper
2016Besondere Merkmale - systematisch ermitteln und durchgängig behandeln
Schloske, Alexander
Presentation
2016Bestimmung des Mehrwertes der 3D-Laserscanning-Technologie für den Anlagenbau. Merkblatt
: Schenk, Michael (Hrsg.)
Report
2016Beyond technology: Towards sustainability through behavioral transitions
Bodenheimer, Miriam
Presentation
2016Bidirektionale Kommunikation mit OPC Unified Architecture
Deppe, T.; Palm, F.; Grüner, S.; Pfrommer, J.
Conference Paper
2016Big data in automotive production - concepts and experiences
Bauernhansl, Thomas
Conference Paper
2016Biobased thermoplastic resins from starch and lignocellulose
Volkert, Bert; Lehmann, André; Ganster, Johannes
Presentation
2016Biokunststoffe
Freudendahl, Diana
Journal Article
2016Bionic forceps for the handling of sensitive tissue
Kölle, Lucia; Schwarz, Oliver
Journal Article
2016Blurring the border between real and virtual parking environments
Becker, Daniel; Munjere, Andrew; Einsiedler, Jens; Massow, Kay; Thiele, Fabian; Radusch, Ilja
Conference Paper
2016BMBF-Foresight-Zyklus II - Vorgehensweise und Ergebnisse
Hirt, Michael; Braun, Matthias; Holtmannspötter, Dirk; Zweck, Axel; Warnke, Philine; Kimpeler, Simone
Journal Article
2016Broadband wavelength control for optical parametric oscillation in radially-poled whispering gallery resonators
Meisenheimer, Sarah-Katharina; Fürst, Josef U.; Schiller, Annelie; Buse, Karsten; Breunig, Ingo
Conference Paper
2016BTI variability of SRAM cells under periodically changing stress profiles
Giering, Kay-Uwe; Lange, André; Kaczer, Ben; Jancke, Roland
Conference Paper
2016Burning behavior of AN/ADN propellants
Tagliabue, C.; Weiser, Volker; Imiolek, Andreas; Bohn, Manfred A.; Heintz, Thomas; Gettwert, Volker
Conference Paper
2016Business Experiments in Cyber Physical Production Systems. EFFRA Making Innovation Happen - Pitch Session
Meyer, Tanja
Presentation
2016Business Models for Increasing Technological Transfer Efectiveness
Fulga, Simina; Marin, Alexandru; Hadar, Alexandra; Badea, Diana Mura; Vladut, Gabriel; Ciocanel, Bogdan; Bucur, Daniela; Ivan, Ion; Boanta, Laura
Conference Paper, Journal Article
2016Can policy measures foster plug-in electric vehicle market diffusion?
Plötz, Patrick; Gnann, Till; Sprei, Frances
Presentation
2016Carbon capture and usage
Freudendahl, Diana
Journal Article
2016Cardiomyocyte generation from somatic sources - current status and future directions
Monaghan, Michael G.; Holeiter, Monika; Layland, Shannon; Schenke-Layland, K.
Journal Article
2016Catch-up validation study of an in vitro skin irritation test method based on an open source reconstructed epidermis (phase II)
Groeber, Florian; Schober, Lena; Schmid, Freia F.; Traube, Andrea; Kolbus-Hernandez, Silvia; Daton, K.; Hoffmann, Sebastian; Petersohn, Dirk; Schäfer-Korting, Monika; Walles, Heike; Mewes, Karsten R.
Journal Article
2016CFY-Stacks: Progress in Development
Megel, Stefan; Kusnezoff, Mihails; Beckert, Wieland; Trofimenko, Nikolai; Dosch, Christian; Weder, Aniko; Jahn, Matthias; Michaelis, Alexander; Bienert, Christian; Brandner, Marco; Skrabs, Stefan; Schulmeyer, Werner; Sigl, Lorenz S.
Poster
2016CFY-Stacks: Progress in Development
Megel, Stefan; Kusnezoff, Mihails; Beckert, Wieland; Trofimenko, Nikolai; Dosch, Christian; Weder, Aniko; Jahn, Matthias; Michaelis, Alexander; Bienert, Christian; Brandner, Marco; Skrabs, Stefan; Schulmeyer, Werner; Sigl, Lorenz S.
Conference Paper
2016Chancen und Herausforderungen der Digitalisierung in der Automobilproduktion
Putz, Matthias
Presentation
2016Changeable assembly systems through flexibly linked process modules
Foith-Förster, Petra; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Changes of solar cell parameters during damp-heat exposure
Zhu, J.; Koehl, M.; Hoffmann, S.; Berger, K.A.; Zamini, S.; Bennett, I.; Gerritsen, E.; Malbranche, P.; Pugliatti, P.; Di Stefano, A.; Aleo, F.; Bertani, D.; Paletta, F.; Roca, F.; Graditi, G.; Pellegrino, M.; Zubillaga, O.; Iranzo, F.J.C.; Pozza, A.; Sample, T.; Gottschalg, R.
Journal Article
2016Characterisation and modelling of the curing reaction of HTPB with isocyanates by reaction heat determined by heat flow microcalorimetry and by volume shrinkage determined with a pressure curing cell
Bohn, Manfred A.; Seyidoglu, Tijen; Mußbach, Günter
Conference Paper
2016Characterisation of different gun propellants by long-term mass loss
Heil, Moritz; Wimmer, Ann-Kathrin; Bohn, Manfred A.
Conference Paper
2016Characterization of Harmonic Emission of Individual Wind Turbines and PV Inverters Based on Measurements. Pt.I: Photovoltaic Inverters
Ackermann, F.; Moghadam, H.; Meyer, J.; Mueller, S.; Domagk, M.; Santjer, F.; Athamna, I.; Klosse, R.; Kuech, K.
Conference Paper
2016Characterization of nanoparticle layers deposited by wire explosions
Knapp, Sebastian; Eickershoff, B.; Eißler, Carmen; Fietzek, Harald; Günthner, Christian; Koleczko, Andreas; Schuppler, Heike
Conference Paper
2016Characterization of novel lightweight radiation shielding materials for space applications
Steffens, Michael; Hepp, Felicitas; Höffgen, Stefan Klaus; Krzikalla, Phillip; Metzger, Stefan; Pellowski, Frank; Santin, Giovanni; Tiedemann, Lars; Tighe, Adrian; Weinand, Udo
Poster
2016Characterization of polymer-based materials using fluorescence method and fractal analysis
Chapnyi, Taras; Beshchasna, Nataliia; Schreiber, Jürgen; Opitz, Jörg
Conference Paper
2016Characterization of several HTPB binder samples by NMR, GPC and OH-number
Kaiser, M.; Ditz, B.; Dörich, Manuela; Bohn, Manfred A.
Conference Paper
2016Charakterisierung und Modellierung von metamorphen HEMT Strukturen im Millimeter- und Submillimeter-Wellenlängenbereich
Ohlrogge, Matthias
: Ambacher, Oliver
Dissertation
2016Charakteristika des Kriegsbildes (besser Konfliktbildes)
Wiemken, Uwe
Report
2016Chip embedding - The key for efficient power electronics solutions
Aschenbrenner, Rolf
Presentation
2016Cleanroom suitability qualification of a six axis robot system for sterile pharmaceutical manufacturing: Holistic approach
Keller, Markus; Boos, Stefan; Baum, Gabriela; Schweizer, Marion; Bürger, Frank; Gommel, Udo
Conference Paper
2016Cleanrooms with low molecular organic contamination (MOC): From material classification measurements to different assessment methods regarding organic condensables
Keller, Markus; Weisser, Stefanie; Gommel, Udo
Conference Paper
2016Cloud basierte IEC 61131 Steuerungsdienste auf Basis von Webtechnologien
Stiller, Michael; Heidrich, Mike; Langmann, Reinhard
Conference Paper
2016Co-design of CML IO and interposer channel for low area and power signaling
Chaudhary, Muhammad Waqas; Heinig, Andy
Conference Paper
2016Cognitive Computing für die Technologiefrühaufklärung: Vom Hype zur realen Anwendung
Bantes, René; John, Marcus
Abstract
2016CoKey: Fast token-based cooperative cryptography
Horsch, Julian; Wessel, Sascha; Eckert, Claudia
Conference Paper
2016Collaboration over IEEE 802.11p to enable an intelligent traffic light function for emergency vehicles
Sawade, Oliver; Schäufele, Bernd; Radusch, Ilja
Conference Paper
2016Collaborative embedded systems - a case study
Schlingloff, Bernd-Holger; Stubert, Henry; Jamroga, Wojciech
Conference Paper
2016Combination of direct laser writing and soft lithography molds for combined nano- and microfabrication
Rumler, Maximilian; Kollmuss, M.; Baier, L.; Michel, F.; Förthner, M.; Becker, M.; Rommel, M.; Frey, L.
Conference Paper
2016Combined heat and power generation from solid biomass derived bioliquids and syngas by TCR® - Upgrade of TCR-liquides by hydrodeoxygenation
Hornung, Andreas; Apfelbacher, Andreas; Neumann, Johannes; Jäger, Nils; Schmitt, Nina; Daschner, Robert
Presentation
2016Combustion of refined renewable biomass fuel (RRBF) in a fluidizied bed
Schulzke, Tim; Westermeyer, Jan; Hornsby, Catherine
Conference Paper
2016Combustion of RRBF in a bubbling fluidized bed
Schulzke, Tim; Westermeyer, Jan; Hornsby, Catherine
Conference Paper
2016Comment on: "Recent revisions of phosphate rock reserves and resources: a critique" by Edixhoven et al. (2014) - clarifying comments and thoughts on key conceptions, conclusions and interpretation to allow for sustainable action
Scholz, Roland W.; Wellmer, F.-W.
Journal Article
2016Compact 35μm fiber coupled diode laser module based on dense wavelength division multiplexing of NBA mini-bars
Witte, U.; Traub, M.; Meo, A. di; Rubel, D.; Hamann, M.; Hengesbach, S.; Hoffmann, D.
Conference Paper
2016A compact readout platform for spectral-optical sensors
Wuchrer, Roland; Amrehn, Sabrina; Liu, Luhao; Wagner, Thorsten; Härtling, Thomas
Journal Article
2016Compact tension and compression testing of braided composites - Challenges and limitations
Kilchert, Sebastian; Gerster, Tobias; Nossek, Matthias; Fritsch, Jens; May, Michael
Presentation
2016Comparison of calorimetric studies on 18650 lithium-ion cells and equivalent circuit model-based simulation applied to driving cycles
Lei, Boxia; Melcher, Andreas; Rohde, Magnus; Ziebert, Carlos; Seifert, H.J.; Gulbins, Matthias; Markwirth, Thomas; Haase, Joachim; Verhaag, Benno
Poster
2016A comparison of current web protocols for usage in cloud based automation systems
Shekhada, Dhavalkumar; Stiller, Michael; Salvi, Aniket
Conference Paper
2016Comparison of dose rate measurements of commercially available hand-held gamma detectors
Köble, Theo; Friedrich, Hermann; Risse, Monika; Berky, Wolfram; Schumann, Olaf
Poster
2016Comparison of dose rate measurements of commercially available hand-held gamma detectors with radiation protection dose meter
Köble, Theo; Friedrich, Hermann
Conference Paper
2016Comparison of experimental modal analysis with operational modal analysis for assessment of the dynamic behaviour of a machine tool component
Berthold, Jan; Kolouch, Martin; Wittstock, Volker; Putz, Matthias
Presentation
2016Comparison of ultrasonic phased array probes based on PMN-PT and PZT 1-3 composites
Walter, Susan; Herzog, Thomas; Schubert, Frank; Heuer, Henning
Conference Paper
2016Complementary research and education opportunities - a comparison of learning factory facilities and methodologies at TU Wien and MTA SZTAKI
Kemeny, Zsolt; Nacsa, János; Erdos, Gábor; Glawar, Robert; Sihn, Wilfried; Monostori, László; Ilie-Zudor, Elisabeth
Journal Article, Conference Paper
2016Complex analysis of monitoring and process data for effective manufacturing
Enge-Rosenblatt, Olaf; Bayer, Christian; Brüning, Andreas
Poster
2016Comprehensive radiation characterization of digital isolators
Wind, Michael; Bagalkote, Jayasimha; Clemens, Peter; Kündgen, Tobias; Latocha, Marcin; Lennartz, Wilhelm; Metzger, Stefan; Poizat, Marc; Ruge, Sven; Steffens, Michael; Beck, Peter
Conference Paper
2016A comprehensive study of intermetallic compounds in solar cell interconnections and their growth kinetics
Geipel, T.; Moeller, M.; Kraft, A.; Eitner, U.
Journal Article, Conference Paper
2016Comprehensive Study of Intermetallic Compounds in Solar Cell Interconnections Including Lead-Free, Low Melting Point Solders
Geipel, T.; Möller, M.; Kraft, A.; Eitner, U.
Conference Paper
2016Computational Models of Argument
: Baroni, Pietro (Ed.); Gordon, Thomas F. (Ed.); Scheffler, Tatjana (Ed.); Stede, Manfred (Ed.)
Conference Proceedings
2016Computerbasiertes Hochdurchsatz-Screening von Werkstoffen
John, Marcus
Journal Article
2016Computers for physical protection - a tribute to programmed solutions
Riedel, W.; Fischer, K.; Grunwald, C.; Stolz, A.
Conference Paper
2016Computing specific intensity distributions for laser material processing by solving an inverse heat conduction problem
Völl, A.; Stollenwerk, J.; Loosen, P.
Conference Paper
2016Concept for automated usability evaluation of graphical user interfaces
Wolf, Karen Insa; Thalappully, Rashik; Goetze, Stefan; Wallhoff, Frank
Presentation
2016Controlled fabrication and system integration of CNT-based ionic actuators - example: Liquid handling for biomedical applications
Neuhaus, Raphael; Stübing, Julian; Addinall, Raphael; Glanz, Carsten; Kolaric, Ivica; Bauernhansl, Thomas
Poster
2016Corporate and grassroot frugal innovation
Wohlfart, Liza; Bünger, Mark; Lang-Koetz, Claus; Wagner, Frank
Journal Article
2016Cost Effective Growth of Silicon Mono Ingots by the Application of a Mobile Recharge System in CZ-Puller
Mosel, F.; Denisov, A.V.; Klipp, B.; Spill, B.; Sharma, R.; Kunert, R.; Dold, P.
Conference Paper
2016Costs of ventilation systems for the retrofit of residential buildings
Coydon, F.; Herkel, S.; Henning, H.
Conference Paper
2016Coupled discrete element and smoothed particle hydrodynamics simulations of the die filling process
Breinlinger, T.; Kraft, T.
Journal Article
2016Coupled simulations of electric arcs for switching devices with MpCCI and ANSYS
Bayrasy, Pascal
Conference Paper
2016CPVMatch - concentrating photovoltaic modules using advanced technologies and cells for highest efficiencies
Philipps, S.P.; Baudrit, M.; Hillerich, K.; Moreau, V.; Parmesani, R.; Román, E.; Sala, G.; Schineller, B.; Timo, G.; Bett, A.W.
Conference Paper
2016CPVMatch - Concentrating photovoltaic modules using advanced technologies and cells for highest efficiencies
Philipps, Simon P.; Baudrit, Mathieu; Hillerich, Karla; Moreau, Valentine; Parmesani, Rolando; Román, Eduardo; Sala, Gabriel; Schineller, Bernd; Timò, Gianluca; Bett, Andreas W.
Conference Paper
2016A crack opening stress equation for in-phase and out-of-phase thermomechanical fatigue loading
Fischer, C.; Schweizer, C.; Seifert, T.
Journal Article
2016The creep behavior of long fiber reinforced thermoplastics examined by microstructural simulations
Fliegener, S.; Hohe, J.; Gumbsch, P.
Journal Article
2016Criticality of material resources in industrial enterprises - structural basics of an operational model
Miehe, Robert; Schneider, Ralph; Baaij, Ferdinand; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Crowdsourcing, digitisation and acceleration
Schimpf, Sven
Conference Paper
2016Cryopreservation of human mucosal leukocytes
Hughes, S.M.; Shu, Z.; Levy, C.N.; Ferre, A.L.; Hartig, H.; Fang, C.; Lentz, G.; Fialkow, M.; Kirby, A.C.; Adams Waldorf, K.M.; Veazey, R.S.; Germann, A.; Briesen, H. von; McElrath, M.J.; Dezzutti, C.S.; Sinclair, E.; Baker, C.A.; Shacklett, B.L.; Gao, D.; Hladik, F.
Journal Article
2016CT-Automat für das Prüflabor - Ein schnelles Prüfsystem für die Qualitätssicherung
Porsch, Felix
Journal Article
2016CURe MODERN - French-German infrastructure inspection, urban and regional planning
Kurz, Jochen Horst; Moryson, Ralf Marcel; Prybyla, Davy; Chassard, Carsten; Wundsam, Timo; Exner, Jan-Philipp
Conference Paper
2016Customer-oriented production system for supplier companies in CTO
Dallasega, Patrick; Rally, Peter; Rauch, Erwin; Matt, Dominik T.
Journal Article, Conference Paper
2016D1.1 Initial framework for resilience assessment
Vollmer, Maike; Walther, Gerald; Jovanovic, Aleksandar; Schmid, Nicolas; Øien, Knut; Grøtan, Tor Olav; Choudhary, Amrita; Kokejl, Roswitha; Buhr, Katarina; Karlsson, Anja; Egloff, Rainer
Report
2016D1.1. ResiStand Handbook - The projects’ conceptual model
Löscher, Michael; Woitsch, Pertti; Zetten, Jolien van; Stolk, Dirk; Lee, Marcel van der; Bousché, Harold; Vollmer, Maike; Pastuszka, Hans-Martin; Heikkilä, Anna-Mari; Fuggini, Clemente; Genta, Simone
Report
2016D1.2 Analysis of existing assessment resilience approaches, indicators and data sources
Jovanovic, Aleksandar; Klimek, Peter; Choudhary, Amrita; Linkov, Igor; Øien, Knut; Schmid, Nicolas; Vollmer, Maike; Sanne, Johan; Andersson, Sofia Lovisa; Székely, Zoltán; Molarius, Riitta; Knape, Thomas; Barzelay, U.; Stanisic, M.; Walther, Gerald; Lieberz, Daniela
Report
2016D1.2 Lessons identified and learned from past Programming Initiatives
Zetten, Jolien van; Lau, Ying Ying; Liedtke, Christopher; Lindner, René; Fykse, Else-Marie; Pastuszka, Hans-Martin
Report
2016D3.1 Contact list of the end‐user community
Lee, Marcel van der; Petiet, Peter; Stolk, Dirk; Anson, Susan; Vollmer, Maike
Report
2016D3.2 Preliminary report on end‐user standardisation demands
Müller, Larissa; Linde-Frech, Isabelle; Vollmer, Maike; Walther, Gerald; Stolk, Dirk; Lee, Marcel van der; Fuggini, Clemente; García Alvarez, Sergio; Genta, Simone
Report
2016A DAC stage analog circuit generator for UDSM and FD-SOI technologies
Prautsch, Benjamin; Rao, Sunil; Eichler, Uwe; Puppala, Ajith; Reich, Torsten
Conference Paper
2016Damage initiation and evolution in silicon nitride under non-conforming lubricated hybrid rolling contact
Raga, R.; Khader, I.; Chlup, Z.; Kailer, A.
Journal Article
2016Data analysis of PEV charging events in rural and business environments - a load behaviour comparison
Triebke, Henriette; Göhler, Georg; Wagner, Sabine
Conference Paper
2016Dataset on underwater change detection
Radolko, Martin; Lukas, Uwe von; Farhadifard, Fahimeh
Conference Paper
2016Debond on command: Fast debonding by exothermic reaction due to microwave activation
Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkel, Andreas; Kahlmeyer, Martin; Böhm, Stefan
Conference Paper
2016Definition of requirements for reference experiments to determine and evaluate various damage mechanisms in fibre composites by acoustic emission
Hönig, Ulrike; Holder, Ulrich; Pietzsch, Alexander; Schulze, Eberhard; Frankenstein, Bernd; Schubert, Lars
Conference Paper
2016Degradation of silicon wafers at high temperatures for epitaxial deposition
Rachow, T.; Reber, S.; Janz, S.; Knapp, M.; Milenkovic, N.
Journal Article
2016Deliverable 6.1. Consumer behavior and social aspects of water consumption
Peters, Anja; Sartorius, Christian; Chatzigeorgakidis, Giorgos; Athanasiou, Spiros; Kupfer, Anna; Staake, Thorsten
Report
2016Deliverable 6.2 - Public part: Research agenda for security issues in land transport
Burbiel, Joachim; Grigoleit, Sonja; Ghazel, Mohamed
Report
2016Deliverable D2.1 - Societal and public sector needs analysis
Gaur, Aakanksha; Ferro, Enrico; Rodriguez, Nuria; Grigoleit, Sonja
Report
2016Deliverable D2.1. Stakeholder report: Identification & analysis
Erdmann, Lorenz; Eckartz, Katharina; Moller, Björn; Tercero Espinoza, Luis A.; Teufel, Benjamin; Fuchs, Maureen; Machacek, Erika; Thorsøe, Kisser; Petavratzi, Evi; Brown, Teresa; Voet, Ester van der; Falck, Eberhard; Bisevac, Vanja; Hofmeister, Tobias; Quental, Lídia; Katalin, Sári; Radwanek-Bak, Barbara; Arnbom, Jan-Olof
Report
2016Deliverable D2.3 - System Architecture and Technical Specifications
Polemi, Nineta; Papastergiou, Spyros; Karantjias, Athanassios; Drosos, Nikos; Gouvas, Panagiotis; Duzha, Armend; Bianchi, Manuel; Campana, Flavio; Erler, Timo; Schauer, Stefan; Mouratidis, Haris; Pavlidis, Michalis; Rekleitis, Evangelos
Report
2016Deliverable D3.1 - SONNETS innovation identification framework for the public sector
Markaki, Ourania; Koussouris, Sotirios; Lampathaki, Fenareti; Michalitsi, Ariadni; Gaur, Aakanksha; Grigoleit, Sonja
Report
2016Deliverable D4.1. Report on Background Risk Management/Assessment Systems Enhancement
König, Sandra; Kollmitzer, Christian; Latzenhofer, Martin; Schauer, Stefan; Gouvas, Panagiotis; Drosos, Nikos; Mouratidis, Haris; Pavlidis, Michalis; Rekleitis, Evangelos; Krantjias, Thanos; Papastergiou, Spyros; Patsakis, Constantinos; Polemi, Nieta; Glykos, Stamatios
Report
2016Deliverable D4.2. Report on Standards and Regulations Compliance
Duzha, Armend; Polemi, Nineta; Gouvas, Panagiotis; Karantjias, Athanasis; Papastergious, Spyros; Patsakis, Constantinos; Douligeris, Christios; Glykos, Stamatios; Exarchou, Georgios
Report
2016Deliverable D8.2 - Report on Dissemination and Communication Activities
Zacharias, Marios; Duzha, Armend; Buhl, Reiner; Papastergiou, Spyros; Papagiannopoulos, Yannis; Mouratidis, Haris; Canepa, Monica
Report
2016Demonstration of a 500 mJ InnoSlab-amplifier for future lidar applications
Löhring, J.; Strotkamp, M.; Elsen, F.; Kasemann, R.; Klein, J.; Traub, M.; Kochem, G.; Meissner, A.; Höfer, M.; Hoffmann, D.
Conference Paper
2016Density-based clustering algorithm for fault detection and identification in HVAC systems
Benndorf, G.; Réhault, N.
Conference Paper
2016Deriving HD maps for highly automated driving from vehicular probe data
Massow, Kay; Kwella, Birgit; Pfeifer, Niko; Häusler, Florian; Pontow, Jens; Radusch, Ilja; Hipp, Jochen; Dölitzscher, Frank; Haueis, Martin
Conference Paper
2016Description of transient material behaviour under constant and variable amplitude loading for cold formed steels by linear flow splitting
Tomasella, Alessio
Dissertation
2016Design and development of LLC DC/DC converter for fuel cell range extender application
Mahajan, A.; Reichert, S.
Conference Paper
2016Design and implementation of a spherical joint for mobile manipulators
Fröhlich, Tim; Reiser, Ulrich
Conference Paper
2016Design optimization and upscaling of a semi-submersible floating platform
Leimeister, M.; Bachynski, E.; Muskulus, M.; Thomas, P.
Presentation
2016Design parameter study of a CFRP T-joint under overpressure conditions due to ballistic impact
Sandoval Murillo, José L.; Ganzenmüller, Georg; Heimbs, Sebastian; May, Michael
Presentation
2016Detecting "self-healing" effects
Wanner, Matthias; Krawczyk, Katarzyna; Schauer, Thadeus; Lachery, E.; Peeterbroeck, S.; Poelman, M.; Schreiner, Claus; Stenzel, Volkmar; Cybik, M.; Mayer, Christian
Journal Article
2016Detection of assembly variations for automatic program adaptation in robotic welding systems
Kuss, Alexander; Schneider, Ulrich; Dietz, Thomas; Verl, Alexander
Conference Paper
2016Detection of hydrothermal aging in Cured-In-Place Pipes (CIPP) based on microwave system
Manavipour, Maryam; Sklarczyk, Christoph; Szielasko, Klaus; Kurz, Jochen Horst; Boller, Christian
Conference Paper
2016Detection of workpiece shape deviations for tool path adaptation in robotic deburring systems
Kuss, Alexander; Drust, Manuel; Verl, Alexander
Journal Article, Conference Paper
2016Determination of preload in bolts by ultrasound without referencing in unloaded state
Becker, Michael; Groß, Nadja; Herzer, Rüdiger
Conference Paper
2016Determination of the wrench-closure translational workspace in closed-form for cable-driven parallel robots
Pott, Andreas; Kraus, Werner
Conference Paper
2016Development of a SOFC/battery-hybrid system for distributed power generation in India
Pfeifer, Thomas; Hartmann, Mathias; Barthel, Markus; Baade, Jens; Näke, Ralf; Dosch, Christian
Conference Paper
2016Development of a technology for the production of reinforced aluminum foam absorbers
Rybandt, Susi; Hohlfeld, Jörg; Hipke, Thomas
Poster
2016Development of an artifact-free aneurysm clip
Brack, Alexander; Senger, Sebastian; Fischer, Gerrit; Janssen, Henning; Oertel, Joachim; Brecher, Christian
Journal Article
2016Development of an intelligent care cart and new supplies concepts for care homes and hospitals
Graf, Birgit; King, Ralf Simon; Schiller, Christian; Rößner, Andrea
Conference Paper
2016Development of patient-specific orbital floor implants made of shape memory alloys
Rotsch, Christian; Grunert, Ronny; Lichtenstein, Jürgen; Wagner, Maximilian; Essig, Harald; Posern, Susanna; Pabst, Friedemann; Hanus, Sybille; Reichmann, Volkmar; Drossel, Welf-Guntram
Presentation
2016Development of sintered bearings with minimal friction losses and maximum life time using infiltrated liquid crystalline lubricants
Amann, T.; Kailer, A.; Beyer-Faiß, S.; Stehr, W.; Metzger, B.
Journal Article
2016Development, characterization and evaluation of switchable façade elements
Pflug, Thibault
: Kuhn, Tilmann (Betreuer); Maurer, Christoph (Betreuer)
Dissertation
2016Diese Kombination aus Reinigen und Bewerten ist einzigartig
Gommel, Udo
Journal Article
2016Differences in compression load behaviour of aluminium foam between static and dynamical testing
Schneider, Frank; Vogel, R.; Gruß, Florian; Hipke, Thomas
Presentation
2016Diffusion behaviour of the acetaldehyde scavenger 2-aminobenzamide in polyethylene terephthalate for beverage bottles
Franz, Roland; Gmeiner, Margit; Gruner, Anita; Kemmer, Diana; Welle, Frank
Journal Article
2016Digital transformation - the future of value adding
Bauernhansl, Thomas
Presentation
2016Digitale Governance - Ein Diskussionspapier
Stemmer, Michael
Report
2016Digitale holografische 3D-Displays
Offenberg, David
Journal Article
2016Digitale Innovationen von Bürgern für Bürger - Design Thinking oder Citizen Science?
Koch, Matthias; Hess, Steffen; Hess, Anne; Magin, Dominik Pascal
Report
2016Digitale Transformation - vom digitalen Abbild zum autonomen System: Status und Perspektiven
Bauernhansl, Thomas
Presentation
2016Digitales Arbeiten. Motive und Wirkungen papierarmer Arbeitsweisen
Jurecic, Mitja; Rief, Stefan; Schullerus, Maren
: Bauer, Wilhelm (Hrsg.)
Study
2016Digitalisierung als Brücke zwischen Energieeffizienz und -flexibilität
Sauer, Alexander
Presentation
2016Digitalisierung im Leichtbau im Kontext Industrie 4.0
Bauernhansl, Thomas
Presentation
2016Digitalisierung im Mittelstand - Wege zu intelligenten Produkten, innovativen Geschäftsmodellen und einer vernetzen Fabrik
Bauernhansl, Thomas
Presentation
2016Digitalisierung im Tourismus in Bayern
Inninger, Wolfgang
Presentation
2016Digitalisierung in der Produktion - Anwendungsbeispiele aus der E³-Forschungsfabrik
Langer, Tino
Presentation
2016Digitalisierung: Chancen für den Mittelstand
Bauernhansl, Thomas
Presentation
2016Direct laser interference patterning and ultrafast laser-induced micro/nano structuring of current collectors for lithium-ion batteries
Zheng, Y.; An, Z.; Smyrek, Peter; Seifert, H.J.; Kunze, Tim; Lang, Valentin; Lasagni, Andrés-Fabián; Pfleging, Wilhelm
Conference Paper
2016Disruptive Innovationen
Bauernhansl, Thomas
Conference Paper
2016DQV - Data Quality Visualization
Gladisch, Stefan; Ruth, Thomas
Study
2016Drill-down analysis with equipment health monitoring
Krauel, Christopher; Weishäupl, Laura; Pfeffer, Markus
Presentation
2016Droop controlled operation of heat pumps on clustered distribution grids with high PV penetration
Dallmer-Zerbe, K.; Fischer, D.; Biener, W.; Wille-Haussmann, B.; Wittwer, C.
Conference Paper
2016DSAM lifetime measurements for the chiral bands in 194TI
Masiteng, P.L.; Pasternak, A.A.; Lawrie, E.A.; Shirinda, O.; Lawrie, J.J.; Bark, R.A.; Bvumbi, S.P.; Kheswa, N.Y.; Lindsay, R.; Lieder, E.O.; Lieder, R.M.; Madiba, T.E.; Mullins, S.M.; Murray, S.H.T.; Ndayishimye, J.; Ntshangase, S.S.; Papka, P.; Sharpey-Schafer, J.F.
Journal Article, Conference Paper
2016A dual center study to compare breath volatile organic compounds from smokers and non-smokers with and without COPD
Gaida, Arne; Holz, Olaf; Nell, Christoph; Schuchardt, Sven; Lavae-Mokhtari, Bianca; Kruse, Lena; Boas, Ursula; Langejuergen, Jens; Allers, Maria; Zimmermann, Stefan
Journal Article
2016Durchführung ganzheitlicher Energieeffizienzprojekte nach der Methodik des Total Energy Efficiency Management (TEEM)
Zimmermann, Fabian
Presentation
2016Durchgängiges mechatronisches Engineering für Sondermaschinen
Frank, Gernot
: Westkämper, Engelbert; Klemm, Peter
Dissertation
2016Durchgängigkeit in Wertschöpfungsketten von Industrie 4.0: Seamless Value Chains in Industrie 4.0
Fay, A.; Schröck, S.; Drumm, O.; Löwen, U.; Schertl, A.; Eckardt, R.; Gutermuth, G.; Krumsiek, D.; Makait, T.; Mersch, T.; Schindler, T.; Schleipen, Miriam
Conference Paper
2016Dwell and penetration of tungsten heavy alloy long-rod penetrators impacting unconfined finite-thickness silicon carbide ceramic targets
Behner, T.; Heine, A.; Wickert, M.
Journal Article
2016Dynamic Sizing of automatic and manual Frequency Restoration Reserves for different Product Lengths
Jost, D.; Braun, A.; Fritz, R.; Otterson, S.
Presentation
2016Dynamische Reifensimulation mit geometrisch exakten Schalen
Roller, Michael
: Betsch, P.; Müller, R.
Dissertation
2016E³-Produktion
Bauernhansl, Thomas; Bogdanov, Ivan; Spalt, Patrik
Journal Article
2016The Eco Lean Method - a combined approach for low cost economic and ecologic optimization in the manufacturing industry
Miehe, Robert; Bogdanov, Ivan; Schneider, Ralph; Hirsch, Marius; Bauernhansl, Thomas; Pawlik, Elzbieta; Horbal, Remigiusz
Journal Article, Conference Paper
2016Economic relevance and scientific action fields of Industrie 4.0
Bauernhansl, Thomas
Presentation
2016Economics of hydrothermal carbonization of biogas digestate in a hybrid AD-HTC plant
Suwelack, Kay; Dostert, Nadim; Wüst, Dominik; Kruse, Andrea
Conference Paper
2016Ecosystems, strategy and business models in the age of digitization - how the manufacturing industry is going to change its logic
Paulus-Rohmer, Dominik; Schatton, Heike; Bauernhansl, Thomas
Journal Article, Conference Paper
2016The effect of rod orientation on electrical anisotropy in silver nanowire networks for ultra-transparent electrodes
Ackermann, Thomas; Neuhaus, Raphael; Roth, Siegmar
Journal Article
2016Effects of policies on patenting in wind power technologies
Schleich, Joachim; Walz, Rainer; Ragwitz, Mario
Report
2016Effects of Retrofitting on the Operation and Deployment of Technologies within a Decentralized System
Saad Hussein, N.; Senkpiel, C.; Hollander, M. den
Conference Paper
2016The effects of speech intelligibility and temporal-spectral variability on performance and annoyance ratings
Liebl, Andreas; Assfalg, Alexander; Schlittmeier, Sabine
Journal Article
2016Effects of surface coatings on the joint formation during magnetic pulse welding in tube-to-cylinder configuration
Bellmann, Jörg; Lueg-Althoff, Jörn; Göbel, Gunther; Gies, Soeren; Beyer, Eckhard; Tekkaya, A. Erman
Conference Paper
2016Efficiency potentials and the extended regional infrastructure: Requirements for a management model
Kuch, Benjamin
Journal Article, Conference Paper
2016Efficient authorization authority certificate distribution in VANETs
Bittl, Sebastian; Roscher, Karsten
Conference Paper
2016Effizienter Einsatz von Bildsensoren mit integrierter Signalverarbeitung
Reichel, Peter
: Spallek, Rainer G. (Betreuer); Döge, Jens
Dissertation
2016Eigenschaftsanalyse an Umformmaschinen
Päßler, Thomas
Presentation
2016EILs - suitable substances for future energetic applications?
Schaller, Uwe; Keicher, Thomas; Krause, Horst; Schlechtriem, S.
Conference Paper
2016Einfluss der Eindickung von dichtereduziertem Sheet Moulding Compound auf die Formteilwelligkeit
Keckl, Christoph
: Henning, F.; Mitschang, P.
Dissertation
2016Einführung in die Prozesstechnologie bei der Vorbehandlung von Kunststoffsubstraten
Michels, Dirk
Presentation
2016Einkauf trifft Industrie 4.0
Henke, Michael; Schulte, Axel T.
Journal Article
2016Einsatz der kryogenen Kühlung zur Zerspanung von schwer spanbaren Materialien
Stoll, Andrea
Presentation
2016Einsatz piezoelektrischer Aktoren und Sensoren in der Zerspanungstechnologie
Bucht, Andre
Presentation
2016Einsatz von Skype im Unternehmen
Messerer, Thomas
Study
2016Einsatz von Smart Materials für Roboterapplikationen - eine Vision?
Bucht, Andre
Presentation
2016Elastomeric materials for all-optical fabrication of tunable volume diffraction gratings
Sakhno O.; Raybchun, A.; Wegener, W.
Presentation
2016Electrical Material Properties and Efficiency Limits of Compensated and Multicrystalline Silicon for Solar Cells
Schindler, Florian
: Weber, E.R.; Reindl, L.M.; Lausen, G.
Dissertation
2016Electrostatic self-assembly of diamond nanoparticles onto Al- and N-Polar sputtered aluminum nitride surfaces
Yoshikawa, Taro; Reusch, Markus; Zürbig, Verena; Cimalla, Volker; Lee, K.-H.; Kurzyp, M.; Arnault, J.-C.; Nebel, Christoph E.; Ambacher, Oliver; Lebedev, Vadim
Journal Article
2016Embedding security and privacy into the development and operation of cloud applications and services
Tran, Thanh Quang; Covaci, Stefan; Magedanz, Thomas; Gouvas, Panagiotis; Zafeiropoulos, Anastasios
Conference Paper
2016Die Emergenz (geteilter) Führungsstrukturen. Konzeptionelle Überlegungen zur sozialen Fundierung von Hierarchiegenese
Roth, Philip
Report
2016Emission spectroscopy on pyrotechnic mixtures
Knapp, Sebastian; Günthner, Christian; Kelzenberg, Stefan; Roth, Evelin; Raab, Angelika; Weiser, Volker
Conference Paper
2016Empirical cluster modeling revisited
Pichler, Peter
Conference Paper
2016Enabling laboratory EUV research with a compact exposure tool
Brose, S.; Danylyuk, S.; Tempeler, J.; Kim, Hyun-su; Loosen, P.; Juschkin, L.
Conference Paper
2016Enabling Solderability of PVD Al Rear Contacts on High-Efficiency Crystalline Silicon Solar Cells by Wet Chemical Treatment
Nagel, H.; Kamp, M.; Eberlein, D.; Kraft, A.; Bartsch, J.; Glatthaar, M.; Glunz, S.W.
Conference Paper
2016Energieeffizienter Betrieb von Kühlschmierstoff-Reinigungsanlagen mit Anschwemmfiltern
Rahäuser, Raphael
: Klemm, Peter (Hauptberichter); Weyrich, Michael (Mitberichter)
Dissertation
2016Energieeffizienz in der Green IT
Knermann, Christian
Presentation
2016Energieeffizienz und Industrie 4.0
Richter, Mark; Langer, Tino
Presentation
2016Energieeffizienz und Industrie 4.0: Aktuelle Entwicklungen
Richter, Mark; Langer, Tino; Putz, Matthias
Presentation
2016Energiemanagement - Anforderungen und Nutzen
Köse, Ekrem
Presentation
2016Energiespeicher für die industrielle Produktion. Aktuelle Entwicklungen und Anwendungsbeispiele
Richter, Mark
Presentation
2016Energiespeichersysteme für die industrielle Produktion
Richter, Mark
Presentation
2016Energy efficiency and industry 4.0. Current developments
Richter, Mark; Langer, Tino
Presentation
2016Energy efficiency in assembly systems
Weeber, Max; Frötschner, Björn; Böhner, Johannes; Steinhilper, Rolf
Journal Article, Conference Paper
2016Energy efficiency of cable-driven parallel robots
Kraus, Werner; Spiller, Alexander; Pott, Andreas
Conference Paper
2016Energy-Management-as-a-Service. Mobility aware energy management for a shared electric vehicle fleet
Ostermann, Julien; Kötter, Falko
Conference Paper
2016Engineering apps for advanced industrial engineering
Volkmann, Johannes Wilhelm; Landherr, Martin; Lucke, Dominik; Sacco, Marco; Lickefett, Michael; Westkämper, Engelbert
Journal Article, Conference Paper
2016Entwicklung ausfallsicherer Funktionen mit AUTOSAR
Schleiß, Philipp
Conference Paper
2016Entwicklung der In-situ Erhitzung von Organoblechen
Grützner, Raik; Mattheß, Danilo
Poster
2016Entwicklung einer Benutzerschnittstelle für die Bedienung von Prüfhardware zur Lichtmastenprüfung
Müller, Tobias
: Ganster, Michael
Bachelor Thesis
2016Entwicklung einer erweiterbaren C++-Klassenbibliothek zur Ansteuerung eines Ultraschallprüfsystems
Oswald, Jan
: Ganster, Michael
Bachelor Thesis
2016Entwicklung eines intelligenten Pflegewagens und neuer Versorgungskonzepte für stationäre Pflegeeinrichtungen
Graf, Birgit; King, Ralf Simon; Schiller, Christian; Friedrich, Michaela
Conference Paper
2016Entwicklung eines Multi-Domain Sprachmodells für das Archivsystem des Westdeutschen Rundfunks
Turzynski, Juliane
: Pörschmann, Christoph; Schmidt, Christoph Andreas
Bachelor Thesis
2016Entwicklung eines PVD-Metallisierungskonzeptes für industrielle rückseitenpassivierte und -kontaktierte Silicium-Solarzellen
Kumm, Julia
: Paul, O.; Weber, E.; Zacharias, M.
Dissertation
2016Entwicklung eines Sensorsystems und eines Verfahrens zur Berechnung der Roboterpose auf Basis von projizierten Strukturen
Drust, Manuel
: Bauernhansl, Thomas; Verl, Alexander (Hauptberichter); Kistner, Arnold (Mitberichter)
Dissertation
2016Entwicklung von SiSiC-Strukturkeramiken aus Reaktionsharzbeton
Kunze, Steffen
: Michaelis, Alexander (Gutachter); Hufenbach, Werner A. (Gutachter)
Dissertation
2016Entwicklungstrends in der Hartzerspanung - Fräsen von Hartmetall und Hartlegierungen
Hösel, Danny; Hochmuth, Carsten
Presentation
2016Equipment, material and processes for UV-DLP-based additive manufacturing of two-component ceramic green bodies and dense structures
Springer, Patrick; Schwarzer, Eric; Refle, Oliver; Richter, Hans-Jürgen
Conference Paper
2016Erfolg mit Elektromobilität
Lamberth-Cocca, Sabrina; Friedrich, Michaela
Study
2016Erweiterte Messsystemanalyse mittels statistischer Versuchsplanung. Anwendungsbeispiel anhand eines Lebensdauertests für Leistungselektronik
Hutzler, Aaron; Schletz, Andreas
Presentation
2016ESKAM - Skalierbare Module aus Antrieb und Achse
Milbrandt, Matthias
Presentation
2016Etablierung eines in vitro HSV-1 Infektionsmodells
Hogk, Ina
: Rupp, S.; Kontermann, R.
Dissertation
2016EU-Strukturfondspolitik
Bisevic, André
Dissertation
2016Evaluation der Verbundforschung im Bereich der "Naturwissenschaftlichen Grundlagenforschung". Endbericht
Dornbusch, Friedrich; Schmitz, Velina; Heimer, Thomas; Tafreschi, Darjusch; Treperman, Jérôme; Schulte, Anna-Julia; Notthoff, Claudia
Report
2016Evaluation of lightweight TPMs for automotive software updates over the air
Petri, Richard; Springer, Markus; Zelle, Daniel; McDonald, Ira; Fuchs, Andreas; Krauß, Christoph
Presentation
2016Evolution equations for the C(t)-integral and the crack-tip opening displacement CTOD for elastic-viscoplastic material behavior and temperature dependent material properties
Schweizer, C.
Journal Article
2016Exact method for the vehicle routing problem with mixed linehaul and backhaul customers, heterogeneous fleet, time window and manufacturing capacity
Oesterle, Jonathan; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Experimental and numerical study of high density filter textiles to determine permeability and retention properties under tensile stress
Rief, S.; Aibibu, D.; Kocaman, T.; Cherif, C.
Conference Paper
2016Experimental and numerical study on crack initiation under fretting fatigue loading
Luke, M.; Burdack, M.; Moroz, S.; Varfolomeev, I.
Journal Article
2016Experimental and simulative characterization of a fin and tubes heat exchanger with PCM for process heat applications
Neumann, H.; Seiler, D.; Schossig, P.; Gschwander, S.
Conference Paper
2016Experimental case studies acc. to ISO 14644-15: From ACC contamination being emitted from material and equipment via the planning phase to finally realized cleanroom settings
Keller, Markus; Gommel, Udo
Conference Paper
2016Experimental characterization of the out-of-plane shear strength of ultra-high molecular weight polyethylene composite by using the Split Hopkinson Bar Device
Ruiz-Ripoll, Maria Luisa; Millon, Oliver; Lässig, Torsten; Riedel, Werner
Presentation
2016Experimentelle Untersuchung von Werkzeugmaschinen - Ansprüche, Herausforderungen und Möglichkeiten
Richter, Carsten
Conference Paper
2016Exploiting the potential of OLED-based photo-organic sensors for biotechnological applications
Krujatz, F.; Hild, O.; Fehse, K.; Jahnel, M.; Werner, A.; Bley, T.
Journal Article
2016Exploring options for the harmonisation of renewable energy support policies in the EU using multi-criteria decision analysis
Steinhilber, Simone
: Wietschel, Martin; Geldermann, Jutta
Dissertation
2016Exploring the use of non-image-based ultrasound to detect the position of the residual femur within a stump
Chong, Sook-Yee; Röhrle, Oliver
Journal Article
2016Fabrication and characterization of a 20 MHz ultrasonic transducer using soft mold process
Günther, Paul; Gebhardt, Sylvia; Neubert, Holger; Herzog, Thomas; Heuer, Henning; Walter, Susan
Poster
2016Fabrication of periodic surface micropatterns on polymers using nickel stamps processed with direct laser interference patterning
Rank, Andreas; Kunze, Tim; Lasagni, Andrés-Fabián
Poster
2016Fabrication of sub-micron surface structures on copper, stainless steel and titanium using picosecond laser interference patterning
Bieda, Matthias; Siebold, Mathias; Lasagni, Andrés-Fabián
Journal Article
2016Fast and flexible space debris risk assessment for satellites
Gulde, Max; Kempf, Scott; Schäfer, Frank
Journal Article
2016Feasibility of Verify-on-Demand in VANETs
Bittl, Sebastian; Roscher, Karsten
Conference Paper
2016FEM simulation of delamination growth in metal-plastic compounds compared to digital image correlation
Saborowski, Erik; Scholze, Mario; Lindner, Thomas; Lampke, Thomas; Töberling, Gerd; Riedel, Frank
Conference Paper
2016Finite Element Simulation of Delamination Processes when Side Milling the Edges of Cross-Ply CFRP
Vazquez Martinez, Hector; Esch, Philipp; Patel, Krunal
Presentation
2016First-principles investigation of hydrogen interaction with TiC precipitates in α-Fe
Stefano, D. di; Nazarov, R.; Hickel, T.; Neugebauer, J.; Mrovec, M.; Elsässer, C.
Journal Article
2016Flexible and economic production of structural parts and assemblies for small produciton numbers
Mülleger, Andreas; Werner, Markus
Presentation
2016Flexo-printed busbarless solar cells for multi-wire interconnection
Lorenz, A.; Gredy, C.; Senne, A.; Beyer, S.; Yao, Y.; Papet, P.; Ufheil, J.; Reinecke, H.
Journal Article, Conference Paper
2016Flexoelectricity and the polarity of complex ferroelastic twin patterns
Salje, E.K.H.; Li, S.; Stengel, M.; Gumbsch, P.; Ding, X.
Journal Article
2016Formation of silicon nanocrystals in silicon carbide using flash lamp annealing
Weiss, Charlotte; Schnabel, Manuel; Prucnal, Slawomir; Hofmann, Johannes; Reichert, Andreas; Fehrenbach, Tobias; Skorupa, Wolfgang; Janz, Stefan
Journal Article
2016Fostering accessibility of OpenCourseWare with semantic technologies - a literature review
Elias, Mirette; Lohmann, Steffen; Auer, Sören
Conference Paper
2016Fostering international raw materials cooperation
Sturm, Flavius; Schimpf, Sven
Report
2016Four-junction wafer-bonded concentrator solar cells
Dimroth, Frank; Tibbits, Thomas N.D.; Niemeyer, Markus; Predan, Felix; Beutel, Paul; Karcher, Christian; Oliva, Eduard; Siefer, Gerald; Lackner, David; Fuß-Kailuweit, Peter; Bett, Andreas; Krause, Rainer; Drazek, Charlotte; Guiot, Eric; Wasselin, Jocelyne; Tauzin, Aurélie; Signamarcheix, Thomas
Journal Article
2016A framework for integration of additive manufacturing technologies in production networks
Spalt, Patrik; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Framework für die energieoptimale Ansteuerung von Werkzeugmaschinen
Schlechtendahl, Jan
: Verl, Alexander (Hauptberichter); Reuss, Hans-Christian (Mitberichter)
Dissertation
2016Fraunhofer-Institut für Graphische Datenverarbeitung. Jahresbericht 2015
: Fellner, Dieter W. (Hrsg.); Baier, Konrad (Red.); Ackeren, Janine van (Red.); Bornemann, Heidrun (Red.); Wehner, Detlef (Red.); Bumke, Carina; Boysens, Oliver; Egner, Juliane
Annual Report
2016Free contact angles in pitch bearings and their impact on contact and stress conditions
Schwack, F.; Stammler, M.; Flory, H.; Poll, G.
Presentation
2016From multifaceted information to coherent and well-founded suggestions for a land transport security research agenda: Proceedings and results of the FP7 project CARONTE
Burbiel, Joachim; Grigoleit, Sonja
Conference Paper
2016Fully organic Aerosoljet printed piezoelectric sensor
Starruß, Elisa; Greifzu, Moritz; Roch, Aljoscha; Dani, Ines; Leyens, Christoph
Poster
2016Functionally graded materials made by water-based multilayer technology
Scheithauer, Uwe; Schwarzer, Eric; Slawik, Tim; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander
Journal Article
2016Funktionsintegration in Werkzeuge und Formen durch generative Fertigungsverfahren - Anwendungsbeispiele und Ausblick
Müller, Bernhard; Gebauer, Mathias
Presentation
2016Future research and development fields for railway inspection
Hanke, Randolf; Bessert, Steffen; Niese, Frank; Schwender, Thomas
Conference Paper
2016Future Work Lab: Successful production work of tomorrow - experience, feel and shape
Hämmerle, Moritz; Pokorni, Bastian; Berthold, Maik; Zimmermann, Thilo
Poster
2016FutureHotel Building 2052
Borkmann, Vanessa; Klein, Sascha; Lambertus, Janina
Study
2016Gallium phosphide window layer for silicon solar cells
Feifel, M.; Rachow, T.; Benick, J.; Ohlmann, J.; Janz, S.; Hermle, M.; Dimroth, F.; Lackner, D.
Journal Article
2016Gamma irradiation test of Ge-doped single-mode optical fiber at cryogenic conditions
Kuhnhenn, Jochen; Schumann, Olaf Jochen; Weinand, Udo; Wolf, Raphael
Conference Paper
2016Eine ganz neue Form der Automatisierung
Dietz, Thomas; Fechter, Manuel
Journal Article
2016Ganzheitliche Bewertung der Eignung eines 6-achsigen Roboters für die aseptische Fertigung
Keller, Markus
Presentation
2016Ganzheitliche Methode zur Auslegung von Reinräumen mit definierter organischer Luftreinheit
Keller, Markus
: Verl, Alexander (Hauptberichter)
Dissertation
2016Gefrierschäume - Entwicklung von zellularen Strukturen für vielfältige Anwendungen
Ahlhelm, Matthias
: Michaelis, Alexander (Hrsg.); Heinrich, Jürgen (Betreuer); Moritz, Tassilo (Betreuer)
Dissertation
2016Generation dependence of ICT device IEMI vulnerability
Adami, Christian; Jörres, Benjamin; Jöster, Michael; Pusch, Thorsten; Suhrke, Michael; Taenzer, Achim
Conference Paper
2016Generator-based design of a 12-Bit DAC soft-IP in 28 nm FD-SOI
Prautsch, Benjamin; Rao, Sunil; Eichler, Uwe; Reich, Torsten
Presentation
2016A generic approach for detection of wear-out situations in machine subsystems
Paschke, Fabian; Bayer, Christian; Enge-Rosenblatt, Olaf
Conference Paper
2016Generic error identification in data sets
El Bekri, Nadia; Peinsipp, Byma
Conference Paper
2016Geometry optimization of branchings in vascular networks
Khamassi, J.; Bierwisch, C.; Pelz, P.
Journal Article
2016Gestaltung des digitalen Wandels: Ein Transformationsprojekt aus der Informationspraxis des Fraunhofer IESE
Göpfert, Brigitte
Presentation
2016Gestaltung von FGL-Aktoren für hohe Lasten
Weisheit, Linda; Pagel, Kenny; Junker, Tom; Senf, Björn; Bucht, Andre
Presentation
2016Gesundheit neu denken
: Bratan, Tanja; Henke, Klaus-Dirk; Kloepfer, Albrecht; Kurscheid, Clasrissa; Leidner, Rüdiger
Book
2016Global IT-Player Google, Facebook & Co: Fluch oder Segen?
Bantes, René
Presentation
2016Globale Verwendungsstrukturen der Magnetwerkstoffe Neodym und Dysprosium: Eine szenariobasierte Analyse der Auswirkung der Diffusion der Elektromobilität auf den Bedarf an Seltenen Erden
Glöser-Chahoud, Simon; Kühn, André; Tercero Espinoza, Luis A.
Report
2016Grain boundary segregation in sintered materials: Effect on densification and grain growth
Lay, Sabine; Guyon, Audrey; Chaix, Jean-Marc; Carry, Claude; Pötschke, Johannes
Conference Paper
2016Graphical Partially Observable Monte-Carlo Planning
Pfrommer, J.
Presentation
2016Green liquid propellant oxidizers basing on solutions of ADN and an in commercial hydrogen peroxide for hypergolic propellants
Weiser, Volker; Hürttlen, Jürgen; Schaller, Uwe; Imiolek, Andreas; Lity, André; Kelzenberg, Stefan
Conference Paper
2016Growth of Ga₂O₃ by furnace oxidation of GaN studied by perturbed angular correlations
Steffens, Michael; Vianden, Reiner; Pasquevich, Alberto F.
Poster
2016Grundlegende Anforderungen zur effizienten Raumdekontamination (u.a. Intensivstationen und OPs) mit Wasserstoffperoxid
Keller, Markus
Presentation
2016Guide to porting MPI applications to GPI-2
Machado, Rui; Rotaru, Tiberiu; Rahn, Mirko; Bartsch, Valeria
Report
2016Hardware and software framework for an open battery management system in safety-critical applications
Akdere, M.; Giegerich, M.; Wenger, M.; Schwarz, R.; Koffel, S.; Fühner, T.; Waldhör, S.; Wachtler, J.; Lorentz, V.R.H.; März, M.
Conference Paper
2016Herstellung und Einsatz von Wendeltiefbohrern zur Hartbearbeitung
Richarz, Sebastian
: Uhlmann, Eckart
Dissertation
2016Herstellung, Modifizierung und Charakterisierung von borcarbidbasierten Keramiken als Thermoelektrikum
Feng, Bing
: Michaelis, Alexander (Gutachter); Lippmann, Wolfgang (Gutachter); Kieback, Bernd
Dissertation
2016HF-release of sacrificial layers in CMOS-integrated MOEMS structures
Döring, Sebastian; Friedrichs, Martin; Pufe, Wolfram; Schulze, Matthias
Journal Article, Conference Paper
2016Hierarchical Hough forests for view-independent action recognition
Hilsenbeck, Barbara; Münch, David; Kieritz, Hilke; Hübner, Wolfgang; Arens, Michael
Conference Paper
2016High accurate robotic drilling with external sensor and compliance model-based compensation
Diaz Posada, Julian Ricardo; Schneider, Ulrich; Pidan, Sergej; Geravand, Milad; Stelzer, Patrick; Verl, Alexander
Conference Paper
2016High dynamic stiffness mechanical structures with nanostructured composite coatings deposited by high power impulse magnetron sputtering
Fu, Qilin; Lorite, Gabriela Simone; Rashid, M. Masud-Ur; Neuhaus, Raphael; Cada, Martin; Hubicka, Zdenek; Pitkänen, Olli; Selkälä, Tuula; Uusitalo, Juha; Glanz, Carsten; Kolaric, Ivica; Kordas, Krisztian; Nicolescu, Cornel Mihai; Toth, Geza
Journal Article
2016High endurance strategies for hafnium oxide based ferroelectric field effect transistor
Müller, J.; Polakowski, P.; Müller, S.; Mulaosmanovic, H.; Ocker, J.; Mikolajick, T.; Slesazeck, S.; Flachowsky, S.; Trentzsch, T.
Conference Paper
2016High performance silver polymer pastes for SHJ cells
Körner, Stefan; Waltinger, Andreas; Partsch, Uwe; Eberstein, Markus
Presentation
2016High precision and high aspect ratio laser drilling: Challenges and solutions
Uchtmann, H.; He, C.; Gillner, A.
Conference Paper
2016High-power operation of coherently coupled tapered laser diodes in an external cavity
Schimmel, G.; Doyen, I.; Janicot, S.; Hanna, M.; Georges, P.; Lucas-Leclin, G.; Decker, J.; Crump, P.; Erbert, G.; Kaunga-Nyirenda, S.; Moss, D.; Bull, S.; Larkins, E.C.; Witte, U.; Traub, M.
Conference Paper
2016Highly accurate thickness measurement of multi-layered automotive paints using terahertz technology
Krimi, Soufiene; Klier, Jens; Jonuscheit, Joachim; Freymann, Georg von; Urbansky, Ralph; Beigang, René
Journal Article
2016A holistic approach for quality oriented maintenance planning supported by data mining methods
Glawar, Robert; Kemeny, Zsolt; Nemeth, Tanja; Matyas, Kurt; Monostori, László; Sihn, Wilfried
Journal Article, Conference Paper
2016Hot spots sensitization and optical detonation measurements of emulsion explosives
Quaresma, J.; Campos, J.; Pimenta, J.; Ribeiro, A.; Mendes, R.; Gois, J.; Deimling, Lukas; Keicher, Thomas
Conference Paper
2016How to do it Wrong: Smartphone Antivirus and Security Applications Under Fire
Huber, Stephan; Rasthofer, Siegfried
Presentation
2016How to trigger mass market adoption of electric vehicles? Factors predicting interest in electric vehicles in Germany
Wesche, Julius P.; Plötz, Patrick; Dütschke, Elisabeth
Report
2016HPEM vulnerability of substation control systems as components of the Smart Grid
Lanzrath, Marian; Suhrke, Michael; Pusch, Thorsten; Adami, Christian; Jöster, Michael
Conference Paper
2016HPEM-Empfindlichkeit von intelligenten Stromzählern als Komponenten des Smart Grid
Lanzrath, Marian; Pusch, Thorsten; Jöster, Michael; Suhrke, Michael
Conference Paper
2016Hybrid multi-objective optimization method for solving simultaneously the line balancing, equipment and buffer sizing problems for hybrid assembly systems
Oesterle, Jonathan; Bauernhansl, Thomas; Amodeo, Lionel
Journal Article, Conference Paper
2016A hybrid optimization method for focused ultrasound plan computation
Scherrer, A.; Jakobsson, S.; Belyarev, A.; Hoffmann, A.; Bortz, M.; reit, X.-R.; Küfer, K.-H.
Report
2016Hybride Fertigungstechnik zur Erhöhung der Effizienz und Sicherheit in der spanenden Bearbeitung
Putz, Matthias
Presentation
2016Hybride Materialcharakterisierung von Stahlblech in Echtzeit
Youssef, Sargon; Veile, Ines; Szielasko, Klaus; Tschuncky, Ralf; Niese, Frank; Weikert-Müller, Miriam
Journal Article
2016HYDRA - Energieabsorption mit Hybridverbunden aus drapierfähigem Material und Aluminiumschaum
Rybandt, Susi; Hohlfeld, Jörg
Poster
2016Hydrodeoxygenation of bio-oils from Thermo-Catalytic Reforming - high energy efficient route to renewable gasoline and diesel
Neumann, Johannes; Hornung, Andreas; Schmitt, Nina; Jäger, Nils; Conti, Roberto; Apfelbacher, Andreas; Daschner, Robert
Presentation
2016Hydrothermal carbonization - a mathematical approach and its statistical application for the prediction of mass yields, energy content and degree of carbonization by process severity
Suwelack, Kay; Wüst, Dominik; Kruse, Andrea
Poster
2016Hygienic Design and building materials - CSM
Keller, Markus
Presentation
2016Hygrothermal analyses of ammonia refrigeration pipe insulation systems. Technical Paper #4
Hart, Gorden H.; Bludau, Christian
Presentation
2016Identifying and evaluating disruptive technologies using technology scanning
Schuh, Günther; Kabasci, Patrick; Drescher, Toni; Ryschka, Simon; Wetterney, Tim
Conference Paper
2016IEC61131 & Industrial Internet of Things - Bewährte Praxis mit zukunftsfähigen Technologien verbinden
Stiller, Michael; Langmann, Reinhard
Presentation
2016III-V multi-junction Metal-Wrap-Through (MWT) concentrator solar cells
Oliva, E.; Salvetat, T.; Jany, C.; Thibon, R.; Helmers, H.; Steiner, M.; Schachtner, M.; Beutel, P.; Klinger, V.; Moulet, J.; Dimroth, F.
Conference Paper
2016Impact of Nano Carbons for the 4th Industrial Revolution
Kolaric, Ivica
Presentation
2016The impact of participation within formal standardization on firm performance
Wakke, Paul; Blind, Knut; Ramel, Florian
Journal Article
2016The impact of ribbon properties on measured peel forces
Eitner, U.; Rendler, L.C.
Journal Article, Conference Paper
2016The impact of risks in renewable energy investments and the role of smart policies
Noothout, Paul; Jager, David de; Tesnière, Lucie; Rooijen, Sascha van; Karypidis, Nikolaos; Brückmann, Robert; Jirous, Filip; Breitschopf, Barbara; Angelopoulos, Dimitrios; Doukas, Haris; Konstantinaviciute, Inga; Resch, Gustav
Report
2016The impact of security by design on the success of open source software
Chehrazi, Golriz; Heimbach, Irina; Hinz, Oliver
Conference Paper
2016Implementierung einer Netzwerkschnittstelle in LS-DYNA zur gekoppelten Simulation
Kriechenbauer, Sebastian
Presentation
2016Implementierung eines kamera- und beschleunigungsbasierten Sensor-Tracking-Verfahrens für Magnetic Field Distortion-(MFD-)Messungen an großen Prüfobjekten
Tikamchue Tchamou, Wilfred
: Brück, Dietmar A.; Buchholz, Martin
Master Thesis
2016An improved approach for process monitoring in laser material processing
König, H.-G.; Pütsch, O.; Stollenwerk, J.; Loosen, P.
Conference Paper
2016Improving material efficiency for ultra-efficient factories in closed-loop value networks
Sheehan, Erin; Braun, Anja-Tatjana; Kuhlmann, Timm; Sauer, Alexander
Conference Paper, Journal Article
2016Improving the Consistency and Completeness of Safety Requirements Specifications
Assis, Pablo Oliveira Antonino de
Dissertation
2016Improving the manufacturing speed and the reproducibility of ionic CNT actuators by the use of screen printed electrodes
Bodny, Florian; Weiler, Manuel; Stübing, Julian; Neuhaus, Raphael; Glanz, Carsten; Kolaric, Ivica; Bauernhansl, Thomas
Poster
2016Improving the sustainability of fatty acid methyl esters (FAME - Biodiesel) - assessment of options for industry and agriculture
Jungmeier, Gerfried; Pucker, Johanna; Ernst, M.; Haselbacher, P.; Lesschen, Jan Peter; Kraft, Axel; Schulzke, Tim; Loo, Eibertus Nicolaas van
Conference Paper
2016In-situ ultrasonic testing of polymeric adhesive bonds exposed to complex mechanical and environmental loads
Rabe, Ute; Netzelmann, Udo; Hirsekorn, Sigrun
Conference Paper
2016In-Situ-Überwachung von Laserschweißprozessen mittels höherfrequenter Schallemissionen
Bastuck, Matthias
: Herrmann, Hans-Georg
Dissertation
2016Increase of capacity flexibility in manufacturing systems by substitution of product functions
Holtewert, Philipp; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Individuelle tätigkeitsunterstützende Werkzeuge für die Mikromontage (Projekt activTool)
Schlenker, Dirk; Meyer, Manfred
Presentation
2016Industrial Internet of Things
Heidrich, Mike; Luo, Jesse Jijun
Study
2016Industrie 4.0
Reschke, Stefan
Journal Article
2016Industrie 4.0 - Chancen für Wertschöpfung und Beschäftigung
Bauernhansl, Thomas
Presentation
2016Industrie 4.0 - Chancen und Herausforderungen für den Mittelstand
Bauernhansl, Thomas
Presentation
2016Industrie 4.0 - Chancen und Risiken für den Mittelstand
Bauernhansl, Thomas
Presentation
2016Industrie 4.0 - Chancen und Risiken für den Mittelstand
Bauernhansl, Thomas
Presentation
2016Industrie 4.0 - digital und energieeffizient in die Zukunft
Sauer, Alexander
Presentation
2016Industrie 4.0 - Opportunities for Pharmaceutical Industry
Bauernhansl, Thomas
Presentation
2016Industrie 4.0 - Positionsbestimmung und Praxisbeispiel
Erdmann, Ralf
Presentation
2016Industrie 4.0 - Das Internet der Dinge und die damit verbundene Chance für kleine und mittelständische Unternehmen
Bauernhansl, Thomas
Presentation
2016Industrie 4.0. Optimization of Value-Adding
Bauernhansl, Thomas
Presentation
2016Industrie 4.0. Production strategies and value-added chains
Bauernhansl, Thomas
Presentation
2016Industrie 4.0. Produktionsstrategien und Wertschöpfungsnetze
Bauernhansl, Thomas
Presentation
2016Industrie 4.0. Standort Deutschland im internationalen Kontext
Bauernhansl, Thomas
Presentation
2016Industrie 4.0: Wie Unternehmen ihre Daten heute sichern
Jung, Christian
Report
2016Industrielle Metallisierungskonzepte für siliziumbasierte Rückkontaktsolarzellen
Hendrichs, Max-Sebastian
Dissertation
2016Industry 4.0 - an economy based on the Internet of Things
Bauer, Wilhelm
Presentation
2016Industry 4.0 - A need for technical and organizational new thinking in the digital ecosystem of the future, supported by specific policy implications
Putz, Matthias
Presentation
2016inFARMING® | technical approaches for indoor horticultural systems of the future
Keuter, Volkmar
Presentation
2016The influence of Al4C3 nanoparticles on the physical and mechanical properties of metal matrix composites at high temperatures
Vorozhtsov, S.; Kolarik, V.; Promakhov, V.; Zhukov, I.; Vorozhtsov, A.; Kuchenreuther-Hummel, V.
Journal Article
2016Influence of buildings on HPEM vulnerability of it infrastructures
Jöster, Michael; Bausen, André; Pohlenz, Stefan; Pusch, Thorsten; Schaarschmidt, Martin; Suhrke, Michael
Conference Paper
2016Influence of charge size on enhanced blast explosives
Gerber, P.; Happ, A.
Abstract
2016Influence of Photovoltaic Module Mounting Systems on the Thermo-Mechanical Stresses in Solar Cells by FEM Modelling
Beinert, A.J.; Ebert, M.; Eitner, U.; Aktaa, J.
Conference Paper
2016Influence of selected coatings on the welding result during Magnetic Pulse Welding (MPW)
Bellmann, Jörg; Lueg-Althoff, Jörn
Presentation
2016Influence of the human factor on measurement results
Risse, Monika; Berky, Wolfram; Chmel, Sebastian; Friedrich, Hermann; Fuss, Giesela; Glabian, Jeannette; Köble, Theo; Rosenstock, Wolfgang; Schumann, Olaf; Kronholz, H.-L.
Presentation
2016The influence of the initial near-surface microstructure and imposed stress level on the running-in characteristics of lubricated steel contacts
Brink, A.; Lichtenberg, K.; Scherge, M.
Journal Article
2016Influence of various binders and oxidizers on the spectral emission of pyro-organic flares
Roth, E.; Weiser, Volker; Raab, Angelika; Lity, André
Conference Paper
2016Influence of Very Efficient Back Reflectors on the Quantum Efficiency of Solar Cells
Micha, D.N.; Walker, A.; Siefer, G.; Dimroth, F.; Bett, A.W.
Conference Paper
2016Innovationen und Trends heutiger Kunststofftechnologien
Scholz, Sebastian
Presentation
2016Innovative strategies to develop chemical categories using a combination of structural and toxicological properties
Batke, Monika; Gütlein, Martin; Partosch, Falko; Gundert-Remy, Ursula; Helma, Christoph; Kramer, Stefan; Maunz, Andreas; Seeland, Madeleine; Bitsch, Annette
Journal Article
2016Innovative Technologien für Ressourceneffizienz - Strategische Metalle und Mineralien
: Dürkoop, A.; Brandstetter, C.P.; Gräbe, G.; Rentsch, L.
Book
2016Innovative technologies as enabler for sorting of black plastics
Nüßler, Dirk; Gruna, R.; Brandt, C.; Küter, A.; Längle, T.; Kieninger, M.; Pohl, N.
Conference Paper
2016Insights from the German Compassionate Use Program of Nintedanib for the Treatment of Idiopathic Pulmonary Fibrosis
Bonella, Francesco; Kreuter, Michael; Hagmeyer, Lars; Neurohr, Claus; Keller, Claus; Kohlhaeufl, Martin J.; Müller-Quernheim, Joachim; Milger, Katrin; Prasse, Antje; Behr, J.; Hetzel, J.; Idzko, M.; Kardos, P.; Koch, A.; Markart, P.; Reichenberger, F.; Schumann, C.; Westhoff, M.; Windisch, W.
Journal Article
2016Insights into metastability of photovoltaic materials at the mesoscale through massive I-V analytics
Peshek, T.J.; Fada, J.S.; Hu, Y.; Xu, Y.; Elsaeiti, M.A.; Schnabel, E.; Köhl, M.; French, R.H.
Journal Article
2016Inspection of reflective surfaces with deflectometry
Burke, Jan
Conference Paper
2016Integrated assessment of emerging science and technologies as creating learning processes among assessment communities
Forsberg, Ellen-Marie; Ribeiro, Barbara; Heyen, Nils B.; Nielsen, Rasmus O.; Thorstensen, Erik; Bakker, Erik de; Klüver, Lars; Reiß, Thomas; Beekman, Volkert; Millar, Kate
Journal Article
2016An integrated modelling approach for spatial-aware federated simulation
Xie, J.; Kozik, R.; Flourenzou, N.
Conference Paper
2016Integrated Power and Data Transceiver Devices for Power-by-Light Systems - A Concept Study
Helmers, H.; Lackner, D.; Siefer, G.; Oliva, E.; Dimroth, F.; Bett, A.W.
Conference Paper
2016Integrating new technologies and materials by reengineering: Selected case study results
Klein, Melanie; Thorenz, Benjamin; Lehmann, Christian; Böhner, Johannes; Steinhilper, Rolf
Journal Article, Conference Paper
2016Integration Technologies for Smart Textiles
Aschenbrenner, Rolf
Presentation
2016Integration von AAL-Technik zur Notfallerkennung in die häusliche Umgebung
Getto, Sascha
Presentation
2016Intelligent zusammenspielende Komponenten ermöglichen neue Ausrichtung der Produktion
Hägele, Martin
Journal Article
2016Intelligente Werkstoffe für die minimalinvasive Versorgung von Orbitafrakturen
Rotsch, Christian; Grunert, Ronny; Posern, Susanna; Pabst, Friedemann
Presentation
2016Intelligentes Qualitätsmodul zur Inline-Qualitätskontrolle für die Additive Produktion der Zukunft
Fulga, Simina
Presentation
2016Interaction Optimization through Pen and Touch, Eye Tracking and Speech Control for the Multimodal Seismic Interpretation Workspace
Kemali, Mehmet Danyel
: Herder, Jens; Rilling, Stefan
Master Thesis
2016Interactive Storytelling & Audio Apps for HbbTV
Patz, Nico; Brennecke, Angela; Fuhrhop, Christian
Presentation
2016Interchangeable product designs for the increase of capacity flexibility in production systems
Holtewert, Philipp; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Interdisziplinäre Kabinenarchitekturen (INDIKAR). Schlussbericht
Riedl, Gerhard; Rösler, Doris; Stratbücker, Sebastian; Grün, Gunnar
Report
2016Interessengetriebene audiovisuelle Szenenexploration
Kühn, Benjamin
: Beyerer, Jürgen (Gutachter)
Dissertation
2016Interleukin-2 receptor and angiotensin-converting enzyme as markers for ocular sarcoidosis
Gundlach, Enken; Hoffmann, Michael Marcus; Prasse, Antje; Heinzelmann, Sonja; Ness, Thomas
Journal Article
2016Interview mit Dr. Bruno Gransche vom Fraunhofer ISI
Gransche, Bruno
Electronic Publication
2016Introducing process building blocks for designing human robot interaction work systems and calculating accurate cycle times
Schröter, Daniel; Kuhlang, Peter; Finsterbusch, Thomas; Kuhrke, Benjamin; Verl, Alexander
Journal Article, Conference Paper
2016Intuitive Erstellung von Störungsgeometrien in dreidimensionalen seismischen Volumendaten
Bender, Jan
: Fuhrmann, Arnulph; Rilling, Stefan
Bachelor Thesis
2016Inverse image modeling for defect detection and optical system characterization
Xu, Dongbo
: Erdmann, Andreas
Dissertation
2016Investigation of the dynamic behavior of a PU based adhesive using Split-Hopkinson Tensile and compression bars
Ledford, Noah; Paul, Hanna; Sauer, Martin; May, Michael
Presentation
2016Investigation of Thermomechanical Stress in Solar Cells with Multi Busbar Interconnection by Finite Element Modeling
Rendler, L.C.; Kraft, A.; Ebert, C.; Wiese, S.; Eitner, U.
Conference Paper
2016Investigation of UV-Induced Degradation of Different Types of WPVS Reference Solar Cells
Kröger, I.; Hohl-Ebinger, J.; Brachmann, S.; Winter, S.
Conference Paper
2016An investigation on the influence of loading rate on the fracture toughness of UHMW-PE composites
May, Michael; Lässig, Torsten; Hiermaier, Stefan
Presentation
2016Investigations on the frequency dependence of the delay spread in an UMi street canyon scenario
Peter, Michael; Weiler, Richard J.; Undi, Fabian; El-Kanawati, Farouk; Jaeckel, Stephan; Raschkowski, Leszek; Thiele, Lars; Sakaguchi, Kei; Keusgen, Wilhelm
Conference Paper
2016The IQmulus Urban Showcase: Automatic Tree Classification and Identification in Huge Mobile Mapping Point Clouds
Böhm, J.; Bredif, Mathieu; Gierlinger, Thomas; Krämer, Michel; Lindenbergh, R.; Liu, K.; Michel, Frank; Sirmacek, B.
Conference Paper
2016JOIN'EM - Dissimilar materials joining using magnetic pulse welding
Assuncao, Enrico; Coutinho, Luisa; Faes, Koen; Psyk, Verena
Presentation
2016Katalog von Empfehlungen zur Steigerung der Energieeffizienz für Beleuchtungszwecke
Boer, Jan de; Hubschneider, Carolin
Report
2016Keeping a factory in an energy-optimal state
Wahren, Sylvia; Colangelo, Eduardo; Sauer, Alexander; Mandel, Jörg; Siegert, Jörg
Conference Paper, Journal Article
2016Key optical components for spaceborne lasers
Löhring, J.; Winzen, M.; Faidel, H.; Miesner, J.; Plum, D.; Klein, J.; Fitzau, O.; Giesberts, M.; Brandenburg, W.; Seidel, A.; Schwanen, N.; Riesters, D.; Hengesbach, S.; Hoffmann, H.-D.
Conference Paper
2016Klassifikation von Fahrerzuständen und Nebentätigkeiten über Körperposen bei automatisierter Fahrt
Martin, Manuel; Diederichs, Frederik; Li, Kangxiong; Voit, Michael; Melcher, Vivien; Widlroither, Harald; Stiefelhagen, Rainer
Conference Paper
2016Klassische Steuerungstechnik im Zeitalter der Cloud
Stiller, Michael; Langmann, Reinhard
Presentation
2016Knowledge-driven scenario development for critical infrastructure protection
Xie, Jingquan; Theocharidou, Marianthi; Barbarin, Yohan
Conference Paper
2016Kognitive Großbearbeitungszentren - Verfügbarkeitssteigerung und Eigenschaftsabsicherung
Frieß, Uwe
Conference Paper
2016KOMMA: Modeling with RDF and linked data
Wenzel, Ken
Presentation
2016Komplettcharakterisierung der winkelselektiven Photovoltaik-Verglasung PVShade®
Wilson, H.R.; Sprenger, W.; Fath, K.; Erban, C.; Kuhn, T.E.
Journal Article
2016Konform temperierter Fluidmischer
Pohl, Markus; Gradmann, Rena; Scheithauer, Uwe; Eberstein, Markus
Poster
2016Kontaktlose Mikroschalter auf der Basis von Dünnschichten aus Aluminiumnitrid und nanokristallinem Diamant
Lang, Nicola
: Ambacher, Oliver
Dissertation
2016Kontextsensitive Beleuchtung: Entwicklung einer neuartigen Versuchseinrichtung und Bewertung der Nutzerakzeptanz
Hubschneider, Carolin; Fang, Yuan; Boer, Jan de
Conference Paper
2016Konzept und Implementierung einer I40-Komponente für Steuerungen aus der Cloud
Langmann, Reinhard; Shekhada, Dhavalkumar; Stiller, Michael
Conference Paper
2016Korrosionsschutz und Struktur von Polymerblends aus wasserbasierten Polymerdispersionen
Englert, Cornelia; Christ, Ulrich; Bremser, Wolfgang
Conference Paper
2016Krater vermeiden - so früh wie möglich
Niemeier, Wolfgang
Journal Article
2016Kunstgelenk - Netzwerk Endoprothetik: Eine Bestandsaufnahme
Grunert, Ronny; Rotsch, Christian; Hunger, Sandra; Funke, Kerstin; Werner, Michael; Müller, Marcel; Töppel, Thomas; Boden, Julian
Presentation
2016LANCA® - Characterization Factors for Life Cycle Impact Assessment. Version 2.0.
Bos, Ulrike; Horn, Rafael; Beck, Tabea; Lindner, Jan Paul; Fischer, Matthias
Book
2016Language modeling using semantic web & neural networks
Bhardwaj, Pallavi
Master Thesis
2016Laser - Geschichte und Geschichten
: Schumann, Frank (Red.); Pollack, Dieter (Red.); Wiedemann, Günter (Red.); Techel, Anja (Red.); Jäckel, Ralf (PR); Fortte, Pierre (Gestaltung)
Book
2016Laser beam welding of atmosphere aluminium die cast material using high frequency beam oscillation and brilliant beam sources
Dittrich, Dirk; Jahn, Axel; Standfuß, Jens; Beyer, Eckhard
Conference Paper
2016Laser remote cutting of battery materials - processes for the factory of the future
Baumann, Robert; Herwig, Patrick; Beyer, Eckhard
Poster
2016Laser Speckle Photometry (LSP) - optical sensor system for monitoring of material condition and processing
Cikalova, Ulana; Bendjus, Beatrice; Sudip, Shohag Roy; Chen, Lili
Conference Paper
2016Laserstrahl-Mehrlagen-Engstspalt-Schweißen von Alloy 617occ - Fertigen von Schlüsselkomponenten zukünftiger energieeffizienter und ressourcensparender Hochtemperatur-Prozesse
Keßler, Benjamin; Dittrich, Dirk; Brenner, Berndt; Standfuß, Jens; Beyer, Eckhard
Conference Paper
2016Das Lastenrad als regionales Mobilitätsangebot. Ergebnisbericht
Rüdiger, David; Kopka, Jan-Philip; Hohaus, Christian
Report
2016Latest development of laser cutting
Wetzig, Andreas; Herwig, Patrick; Hauptmann, Jan; Goppold, Cindy; Baumann, Robert; Fürst, Andreas; Rose, Michael; Pinder, Thomas; Mahrle, Achim; Beyer, Eckhard
Conference Paper
2016Leichtbaupotenzial langfaserverstärkter Thermoplaste (LFT) in Integralschaumbauweise hergestellt durch Schaumspritzgießen mit Dekompressionshub
Roch, Alexander
: Elsner, Peter; Drummer, D.; Henning, Frank
Dissertation
2016Der Lighting Retrofit Adviser des IEA-SHC Task 50
Boer, Jan de; Wössner, Simon; Fontoynont, Marc; Knoop, Martine; Paule, Bernhard; Kaempf, Jérôme; Dubois, Marie-Claude
Conference Paper
2016Load and failure behavior of human muscle samples in the context of proximal femur replacement
Schleifenbaum, Stefan; Schmidt, Michael; Möbius, Robert; Wolfskämpf, Thomas; Schröder, Christian; Grunert, Ronny; Hammer, Niels; Prietzel, Torsten
Journal Article
2016Logistikinnovationen Baden-Württemberg
: Bernecker, Tobias; Schwarz, Oliver; Winter, Elena; Raiber, Steffen
Study
2016Low-Delay Forwarding with Multiple Candidates for VANETs Using Multi-Criteria Decision Making
Roscher, Karsten; Jiru, Josef; Knorr, Rudi
Conference Paper
2016Low-temperature interconnection of PVD-aluminium metallization
Geipel, T.; Kumm, J.; Moeller, M.; Kroely, L.; Kraft, A.; Eitner, U.; Wolf, A.; Zhang, Z.; Wolfahrt, P.
Journal Article, Conference Paper
2016LTCC - packaging of a laser optical system for harsh environments
Ihle, Martin; Ziesche, Steffen; Beckert, Erik; Hornaff, Marcel
Conference Paper
2016Machine vision platform for non-destructive testing methods of fibre reinforced plastics
Effenberger, Ira; Felix, Thomas; Frommknecht, Andreas; Fulga, Simina; Springhoff, Axel
Conference Paper
2016Made in Germany 4.0
Putz, Matthias
Presentation
2016Magnetic pulse welding of tubes: Ensuring the stability of the inner diameter
Lueg-Althoff, Jörn; Bellmann, Jörg; Gies, Soeren; Schulze, Sebastian; Tekkaya, A. Erman; Beyer, Eckhard
Conference Paper
2016Magnetic pulse welding: Joining within microseconds - high strength forever
Bellmann, Jörg; Beyer, Eckhard; Lueg-Althoff, Jörn; Gies, Soeren; Tekkaya, A. Erman; Kirchhoff, Gunter; Schulze, Sebastian
Conference Paper
2016Magnetic pulse welding: Solutions for process monitoring within pulsed magnetic fields
Bellmann, Jörg; Lueg-Althoff, Jörn; Schulze, Sebastian; Gies, Soeren; Beyer, Eckhard; Tekkaya, A. Erman
Conference Paper
2016Magnetic susceptibility imaging as a new approach towards characterization and testing of para- and diamagnetic materials
Szielasko, Klaus; Gupta, Bhaawan; Kurz, Jochen Horst
Conference Paper
2016Magnetrecycling bei Pedelecs: Rahmenbedingungen und Akteure - Status Quo und Perspektiven
Eckartz, Katharina; Glöser-Chahoud, Simon; Ostertag, Katrin
Report
2016Making the implicit explicit: A look inside the implicit discount rate
Schleich, Joachim; Gassmann, Xavier; Faure, Corinne; Meissner, Thomas
Report
2016Making the implicit explicit: A look inside the implicit discount rate
Schleich, Joachim; Gassmann, Xavier; Faure, Corinne; Meissner, Thomas
Journal Article
2016Managing the complexity of critical infrastructures. A modelling and simulation approach
: Setola, Roberto; Rosato, Vittorio; Kyriakides, Elias; Rome, Erich
Book
2016Manufacturing and properties of polycrystalline WC-Co based cemented carbides
Pötschke, Johannes; Richter, Volkmar; Mayer, Markus
Conference Paper
2016Manufacturing knowledge for industrial robot systems: Review and synthesis of model architecture
Kuss, Alexander; Diaz Posada, Julian Ricardo; Hollmann, Rebecca; Dietz, Thomas; Hägele, Martin
Conference Paper
2016Mapping representations of speaker characteristics using deep learning
Tanuadji, Maureen
Master Thesis
2016Marktanteilsbildung von Containerliniendiensten
Gailus, Sven
: Jahn, Carlos (Hrsg.); Ihl, C.
Dissertation
2016Marktstudie zur Zerspanung von faserverstärkten Kunststoffen
Esch, Philipp; Schneider, Marco
Conference Paper
2016Mass flow measurements on airbag inflators
Arce, Yurrita P.; Klahn, Thorsten; Deimling, Lukas; Roussel Garcia, Raquel; Schreiber, Achim
Conference Paper
2016Material limits of silicon from state-of-the-art photoluminescence imaging techniques
Schindler, F.; Giesecke, J.; Michl, B.; Schön, J.; Krenckel, P.; Riepe, S.; Warta, W.; Schubert, M.C.
Conference Paper
2016Material- and energy-efficient production of ultra-transparent conductive films based on rodlike conductive nanoparticles
Ackermann, Thomas; Sahakalkan, Serhat; Boonen, Laura; Glanz, Carsten; Kolaric, Ivica
Poster
2016Mathematische Modellierung zur Optimierung der Wertschöpfungsverteilung nach quantitativen und qualitativen Kriterien in Produktionsnetzwerken der diskreten Fertigung
Prinz, Andrea
: Bauernhansl, Thomas; Hachenberger, Dirk
Dissertation
2016A maturity model for assessing industry 4.0 readiness and maturity of manufacturing enterprises
Schumacher, Andreas; Erol, Selim; Sihn, Wilfried
Journal Article, Conference Paper
2016Measurement of surface topographies in the nm-range for power chip technologies by a modified low-coherence interferometer
Taudt, Christopher; Baselt, Tobias; Nelsen, Bryan L.; Aßmann, Heiko; Greiner, Andreas; Koch, Edmund; Hartmann, Paul
Conference Paper
2016Mechanisms underlying epigenetic and transcriptional heterogeneity in Chinese hamster ovary (CHO) cell lines
Veith, Nathalie; Ziehr, Holger; MacLeod, Roderick A.F.; Reamon-Büttner, Stella Marie
Journal Article
2016Metallorganische-Gasphasenepitaxie von III/V-Mehrfachsolarzellen für die Konzentratoranwendung
Kellenbenz, René
Dissertation
2016Method for evaluating modularization potential in product design based on production time variety
Keckl, Stefan; Abou-Haydar, Antoin; Westkämper, Engelbert
Journal Article, Conference Paper
2016Methode zur Reduktion technischer Nebenzeiten in der spanenden Fertigung
Bosch, Thomas
: Klemm, Peter; Weyrich, Michael; Liewald, Mathias; Bauernhansl, Thomas; Verl, Alexander; Westkämper, Engelbert
Dissertation
2016Methode zur Unterstützung der Mitarbeiterpartizipation im Change Management der variantenreichen Serienproduktion durch Lernfabriken
Dinkelmann, Max
: Bauernhansl, Thomas; Abele, Eberhard
Dissertation
2016Mice produced by mitotic reprogramming of sperm injected into haploid parthenogenotes
Suzuki, Toru; Asami, Maki; Hoffmann, Martin; Lu, Xin; Guzvic, Miodrag; Klein, Christoph A.; Perry, Anthony C.F.
Journal Article
2016Micro-System: Gallium Nitride RF-Broad-Band High-Power Amplifier
Mußer, M.
: Ambacher, O. (Referent); Manoli, Y. (Betreuer)
Dissertation
2016Microcracks in silicon wafers I: Inline detection and implications of crack morphology on wafer strength
Demant, M.; Welschehold, T.; Oswald, M.; Bartsch, S.; Brox, T.; Schoenfelder, S.; Rein, S.
Journal Article
2016Microcracks in silicon wafers II: Implications on solar cell characteristics, statistics and physical origin
Demant, M.; Welschehold, T.; Kluska, S.; Rein, S.
Journal Article
2016Micromechanical finite element modeling of long fiber reinforced thermoplastics
Fliegener, Sascha
: Gumbsch, P.; Böhlke, T.
Dissertation
2016Microscopic Measurement and Analysis of the Soiling Behavior of Surfaces with Standardized and Real Dust - A Parameter Study
Klimm, E.; Ost, L.; Köhl, M.; Weiß, K.-A.
Journal Article, Conference Paper
2016Microsoft Kinect 2.0 in der Rehabilitation
Sliwinski, Gregorz; Werner, Michael; Heinke, Andreas; Malberg, Hagen; Sliwinski, Zbigniew
Abstract
2016Mikrostruktur- und mechanismusbasierte Werkstoffmodelle zur Beschreibung des Deformations- und Lebensdauerverhaltens von thermomechanisch beanspruchten Graugusswerkstoffen
Metzger, Mario
: Riedel, H.; Böhlke, T.; Seifert, T.
Dissertation
2016Mikrostruktursimulationen zur Ermittlung von Materialeigenschaften für Blechwerkstoffe und Anwendung in der Umformsimulation
Baiker, Maria
: Riedel, H.; Böhlke, T.; Liewald, M.
Dissertation
2016Mit dem Internet der Dinge vom Gebäude- zum Quartiersenergiemanagement
Bretschneider, Peter; Bernard, Thomas; Herzog, Reinhard; Tippmann, V.; Warweg, Oliver; Naumann, Steffi
Conference Paper
2016Mit dem Internet der Dinge vom Gebäude- zum Stadtteil-Energiemanagement
Bretschneider, Peter; Bernard, Thomas; Herzog, Reinhard; Tippmann, Volker; Warweg, Oliver; Naumann, Steffi
Conference Paper
2016Mit der Fehler-Prozess-Matrix (FPM) komplexe Montageprozesse nach Kosten, Qualität u. Produktivität optimieren
Schloske, Alexander
Presentation
2016MITIGATE - Deliverable D2.2 - Evidence-driven maritime supply chain risk assessment approach
Polemi, Nineta; Papastergiou, Spyridon; Karantzias, Athanassios; Georgiakodis, Fotios; Patsakis, Constantinos; Ntrigkogias, Christos; Schauer, Stefan; Latzenhofer, Martin; König, Sandra; Göllner, Johannes; Buhl, Reiner; Fiedler, Ralf; Bosse, Claudia; Mouratidis, Haris; Pavlidis, Michalis; Rekleitis, Evangelos
Report
2016Mobile Roboter mit Manipulator sicher konzipieren und einsetzen
Jacobs, Theo
Presentation
2016Model abstraction of 3D-integrated/interposer-based high performance systems for faster (thermal) simulation
Heinig, Andy; Papaioannou, Dimitrios; Fischbach, Robert
Conference Paper
2016A model for public fast charging infrastructure needs
Gnann, Till; Goldbach, Daniel; Jakobsson, Niklas; Plötz, Patrick; Bennehag, Anders; Sprei, Frances
Presentation
2016Modeling and simulation of ultrasonic testing - a practical guide by the Sub-Committee "Modeling and Imaging" within the DGZfP Committee of Experts on UT
Spies, Martin
Conference Paper
2016Modeling of dispersive millimeter-wave GaN HEMT devices for high power amplifier design
Schwantuschke, Dirk
: Kallfass, I. (Betreuer); Ambacher, Oliver (Hrsg.)
Dissertation
2016Modeling the post-implantation annealing of platinum
Badr, Elie; Pichler, Peter; Schmidt, Gerhard
Conference Paper
2016Modellbasierte Auslegung des Wälzschälprozesses
Bauer, Ruben
Conference Paper
2016Modellbasierte Fehlerdiagnoseverfahren zur Validierung von Simulationsmodellen dynamischer Systeme
Haffke, Björn
Dissertation
2016Modellbasierte Prozessoptimierung für das Mikrofräsen
Mahr, Frederik Felix
: Uhlmann, Eckart
Dissertation
2016Modellbasierte Softwareentwicklung für mobile Manipulatoren im industriellen Einsatz
Bubeck, Alexander
: Verl, Alexander (Hauptberichter); Hein, Björn (Mitberichter); Wagner, Stefan (Mitberichter)
Dissertation
2016Modellbasierte Untersuchung von Politikinstrumenten zur Förderung erneuerbarer Energien und Energieeffizienz im Gebäudebereich
Steinbach, Jan
Dissertation
2016Modellbasierter Entwurfsassistent zur Auslegung spezifischer Architektur- und Konfigurationseigenschaften von Kommunikationsnetzen mit Echtzeitanforderungen
Leßmann, Gunnar; Schneider, Daniel; Flatt, Holger; Schriegel, Sebastian; Jasperneite, Jürgen
Conference Paper
2016Modellierung des Verformungs- und Versagensverhaltens punktgeschweißter Mischverbindungen zwischen mikrolegierten und pressgehärteten Stählen
Burget, Sebastian
: Gumbsch, P.; Enzinger, N.
Dissertation
2016Modellierung von Anisotropieentwicklung und Rissausbreitung beim Sintern dünner keramischer Schichten
Rasp, Tobias
Dissertation
2016Modellierung von raum-zeitlichen Eigenschaften der Windenergieeinspeisung für wetterdatenbasierte Windleistungssimulationen
Knorr, K.
Dissertation
2016Modelling current filamentation in Circuit Simulation
Scharf, Patrick; Sohrmann, Christoph; Holland, Steffen
Presentation
2016Modelling dependencies to improve the cross-domain collaboration in the engineering process of special purpose machinery
Helbig, Tobias; Erler, Stefan; Westkämper, Engelbert; Hoos, Johannes
Journal Article, Conference Paper
2016Modelling grain growth in the framework of Rational Extended Thermodynamics
Kertsch, L.; Helm, D.
Journal Article
2016Modelling of effective minority carrier lifetime in 4H-SiC n-type epilayers
Kaminzky, Daniel; Kallinger, Birgit; Berwian, Patrick; Rommel, Mathias; Friedrich, Jochen
Conference Paper
2016Modelling of measurement data on the curing reaction of HTPB with isocyanate obtained by heat flow microcalorimetry and pressure decrease in closed vessel cells
Bohn, Manfred A.; Seyidoglu, Tijen; Mußbach, Günter
Conference Paper
2016Modelling the lean startup: A simulation tool for entrepreneurial growth decisions
Täuscher, Karl; Abdelkafi, Nizar
Presentation
2016Modellprädiktive Einzelraumregelung auf Basis empirischer Modelle
Paschke, Fabian; Franke, Matthias; Haufe, Jürgen
Conference Paper
2016Modified starch as potential water-based binder system for interior coatings
Gabriel, Christina; Wanner, Matthias; Wetzel, Hendrik; Radosta, Sylvia; Vorwerg, Waltraud
Presentation
2016Modified starch as potential water-based binder system for interior coatings
Gabriel, Christina; Wetzel, Hendrik; Radosta, Sylvia; Vorwerg, Waltraud
Presentation
2016Modified starch dispersion as water-based binder system for paints and varnishes
Gabriel, Christina; Wanner, Matthias; Wetzel, Hendrik; Radosta, Sylvia; Vorwerg, Waltraud
Presentation
2016Modified starch dispersions as water-based binder system for paints and varnishes
Gabriel, Christina; Wanner, Matthias; Wetzel, Hendrik; Radosta, Sylvia; Vorwerg, Waltraud
Journal Article
2016Modified starches for concentrated water-based binder systems with application in paints and varnishes
Gabriel, Christina; Wanner, Matthias; Wetzel, Hendrik; Radosta, Sylvia; Vorwerg, Waltraud
Presentation
2016Modifizierung der In-situ-Erhitzung für die sensorische Nutzung
Grützner, Raik; Mattheß, Danilo
Poster
2016Molecular dynamic simulation of collision-induced third-body formation in hydrogen-free diamond-like carbon asperities
Lautz, J. von; Pastewka, L.; Gumbsch, P.; Moseler, M.
Journal Article
2016Molecular dynamics simulation of cohesion within solid propellants
Nardai, Michael M.; Bohn, Manfred A.
Conference Paper
2016Monitoring of drying of cement screed with the help of ultra-wideband microwaves and air-coupled antennas
Manavipour, Maryam; Sklarczyk, Christoph; Szielasko, Klaus
Conference Paper
2016Mosaic modules for improved design options in building integrated photovoltaic modules
Ebert, M.; Mittag, M.; Fellmeth, T.; Spribille, A.; Mindehoud, T.; Gijzen, G.; Fath, K.; Hecker, R.; Eitner, U.
Conference Paper
2016MQTT-basierte Sensordatenerfassung als Voraussetzung für simulationsgestützte Datenanalysen in den Bereichen Industrie 4.0 und IoT
Schneider, André; Köhler, Andreas; Paschke, Fabian; Enge-Rosenblatt, Olaf; Bayer, Christian
Presentation
2016Multi-level energy demand optimizer system for machine tool controls
Schlechtendahl, Jan; Eberspächer, Philipp; Schraml, Philipp; Verl, Alexander; Abele, Eberhard
Journal Article, Conference Paper
2016Multi-pass-narrow-gap welding with high power diode laser for steel construction
Dittrich, Dirk; Standfuß, Jens; Strohbach, Robert
Presentation
2016Multi-platform application toolkit
Zwicklbauer, Miggi; Broadbent, Matthew; Dufourd, Jean-Claude; Fuhrhop, Christian; Miccoli, Stefano; Schiller, Fabian; Tuominen, Ville
Conference Paper
2016Multichannel analysis of medium grazing angle sea clutter for airborne microwave radar systems
Gracheva, Valeria
: Ender, J. (Gutachter); Loffeld, O. (Gutachter)
Dissertation
2016Multilagen-Mikrofluidikplattform für die Zellkultivierung mit integrierter Dickschichtsensorik
Busek, Mathias; Grünzner, Stefan; Franke, Volker; Steinfelder, Christian; Sonntag, Frank
Conference Paper
2016Multisensor-Messsystem für das robotergestützte Bohren
Kühnle, Jens; Frommknecht, Andreas
Presentation
2016Multivariate modeling of variability supporting non-gaussian and correlated parameters
Lange, André; Sohrmann, Christoph; Jancke, Roland; Haase, Joachim; Cheng, Binjie; Asenov, Asen; Schlichtmann, Ulf
Journal Article
2016Nachdämmung ("Aufdoppelung") alter Wärmedämmverbundsysteme an Wohngebäuden
Clausnitzer, Klaus-Dieter; Fette, Max; Janßen, Karen; Lösch, Stefan
Report
2016Natural circulation defrosting with propane in horizontal evaporators of large capacity air-to water heat pump
Oltersdorf, T.; Braungardt, S.; Sonner, C.; Dankwerth, C.; Malenkovic, I.; Miara, M.; Henning, H.M.
Conference Paper
2016NDT-based assessment of shrinkages and dross in heavy nodular cast iron components of wind energy turbines
Kurz, Jochen Horst; Manavipour, Maryam; Kopp, Melanie; Bruche, Dietmar; Pudovikov, Sergey; Tschuncky, Ralf; Szielasko, Klaus
Conference Paper
2016Neuartige Spannkonzepte mit aktiver Verzugskompensation beim Rührreibschweißen
Schulze, Sebastian
: Füssel, Uwe (Gutachter); Kupke, Michael (Gutachter); Göbel, Gunther (Betreuer); Standfuß, Jens (Betreuer); Brenner, Berndt (Betreuer)
Dissertation
2016Neuartiges Verfahren zum druckdichten Laserstrahlschweißen von Aluminium aus Atmosphären-Druckguss
Dittrich, Dirk; Standfuß, Jens; Jahn, Axel
Conference Paper
2016Neue Methoden der Technologiefrühaufklärung: Zur Verknüpfung von Contents Analytics, Bibliometrie und Visualisierung
Bantes, René; John, Marcus
Presentation
2016New approaches in nondestructive characterisation of the interface in metal - CFRP hybrid structures
Herrmann, Hans-Georg; Schwarz, Michael; Summa, Jannik
Conference Paper
2016New concept for magnetocaloric heat pumps based on thermal diodes and latent heat transfer
Bartholomé, Kilian; Hess, Tobias; Mahlke, Andreas; König, Jan D.
Conference Paper
2016New concepts for friction stir welding of 3D shells
Schulze, Sebastian; Grimm, Andreas; Eger, René; Göbel, Gunther; Standfuß, Jens; Beyer, Eckhard
Presentation
2016New material routes to polymeric solid electrolytes
Meyer, Wolfdietrich; Asaftei, Simona; Grothe, Dorian; Janietz, Silvia
Poster
2016New Method to define Material Removal Characteristics in PECM - Pulsed Electro Chemical Machining
Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Wertheim, Rafael; Edelmann, Jan; Schubert, Andreas; Putz, Matthias
Presentation
2016New vacuum coating technologies for metal strips and foils
Metzner, Christoph; Heinß, Jens-Peter; Scheffel, Bert; Morgner, Henry
Conference Paper
2016Niedrigdimensionale Modelle zur Simulation des dynamischen Verhaltens von Werkzeugmaschinen unter Berücksichtigung der Pose
Wintering, Jens Hermann
: Uhlmann, Eckart
Dissertation
2016Non-destructive testing of green sanitary ceramics by microwaves and an active thermographic technique
Walle, Günter; Sklarczyk, Christoph; Netzelmann, Udo
Conference Paper
2016Non-isolating DC/DC converter for a fuel cell powered aircraft
Kreutzer, O.; Billmann, M.; Maerz, M.; Lange, A.
Conference Paper
2016Nondestructive cell evaluation techniques in SOFC stack manufacturing
Wunderlich, Christian
Conference Paper
2016Nondestructive characterization of ageing phenomena in heat resistant steels by means of micromagnetic techniques
Rabung, Madalina; Kopp, Melanie; Tschuncky, Ralf; Kuhn, Bernd; Uchimoto, Tetsuya
Conference Paper
2016Nondestructive materials characterization and testing of casting materials
Veile, Ines; Tschuncky, Ralf; Weikert-Müller, Miriam; Bruche, Dietmar; Weber, Fabian; Kopp, Melanie; Szielasko, Klaus
Conference Paper
2016Nondestructive testing systems with magnetic flux leakage (MFL)
Youssef, Sargon; Szielasko, Klaus; Kurz, Jochen Horst; Tschuncky, Ralf
Conference Paper
2016Nonproliferative and proliferative lesions of the rat and mouse skeletal tissues (bones, joints, and teeth)
Fossey, Stacey; Vahle, John; Long, Philip; Schelling, Scott; Ernst, Heinrich; Boyce, Rogely Waite; Jolette, Jacquelin; Bolon, Brad; Bendele, Alison; Rinke, Matthias; Healy, Laura; High, Wanda; Roth, Daniel Robert; Boyle, Michael; Leininger, Joel
Journal Article
2016A novel concept for wearable, modular and soft support systems used in industrial environments
Otten, Bernward; Stelzer, Patrick; Weidner, Robert; Argubi-Wollesen, Andreas; Wulfsberg, Jens Peter
Conference Paper
2016A novel control algorithm for grid-connected inverters improving power quality using voltage control and virtual impedance
Reichert, S.; Stickan, B.
Conference Paper
2016A novel electrostatic micro-actuator class and its application potential for optical MEMS
Schenk, Harald; Conrad, Holger; Gaudet, Matthieu; Uhlig, Sebastian; Kaiser, Bert; Langa, Sergiu; Stolz, Michael; Schimmanz, Klaus
Conference Paper
2016A novel piezoelectric fibre patch transducer for shear horizontal wave modes
Köhler, Bernd; Gaul, Tobias; Schubert, Frank; Lieske, Uwe
Conference Paper
2016Novel wavefront sensing strategies for strong atmospheric turbulence
Stein, Karin; Gladysz, Szymon; Zepp, Andreas; Anzuola, Esdras; Segel, Max
Presentation
2016Nucleation of PCMs in confined geometries
Hagelstein, G.; Gschwander, S.
Conference Paper
2016Numerical exploration into the potential of tungsten reinforced CuCrZr matrix composites
Hohe, J.; Fliegener, S.; Findeisen, C.; Reiser, J.; Widak, V.; Rieth, M.
Journal Article
2016Oberflächenanalytik zur Qualitätskontrolle in der Medizintechnik
Haupt, Michael
Presentation
2016Offshore foundation monitoring by guided waves - challenges and perspectives
Weihnacht, Bianca; Frankenstein, Bernd; Gaul, Tobias; Neubeck, Robert; Schubert, Lars
Conference Paper
2016Das ÖFIT-Trendsonar der IT-Sicherheit
Opiela, Nicole; Hoepner, Petra; Weber, Mike
Report
2016Ökologische und ökonomische Effekte einer Regionalisierung der Automobilzulieferer - ein systemdynamisches Wirkungsmodell
Kühn, André
Dissertation
2016On determination of focal laws for linear phased array probes as to the active and passive element size
Gommlich, Andreas; Schubert, Frank
Conference Paper
2016On the design of passive resonant circuits to measure local pulse wave velocity in a stent
Schächtele, Jonathan
Journal Article
2016On the effect of artificial distortions on objective performance measures for dialog enhancement
Torcoli, Matteo; Uhle, Christian
Conference Paper
2016On the feasibility of the Chevron Notch Beam method to measure fracture toughness of fine-grained zirconia ceramics
Kailer, A.; Stephan, M.
Journal Article
2016On- and offline ultrasonic characterization and inspection of additively manufactured components
Spies, Martin; Rieder, Hans; Bamberg, Joachim; Henkel, Benjamin
Conference Paper
2016On- and offline ultrasonic inspection of additively manufactured components
Rieder, Hans; Spies, Martin; Bamberg, Joachim; Henkel, Benjamin
Conference Paper
2016OPC UA als Basistechnologie zur Orchestrierung von Produktionssystemen: Orchestrierung von Diensten der Komponenten in Produktionssystemen mit Hilfe von OPC UA
Schleipen, Miriam; Pfrommer, J.
Conference Paper
2016Open, flexible and extensible battery management system for lithium-ion batteries in mobile and stationary applications
Giegerich, M.; Akdere, M.; Freund, C.; Fühner, T.; Grosch, J.L.; Koffel, S.; Schwarz, R.; Waldhör, S.; Wenger, M.; Lorentz, V.R.H.; März, M.
Conference Paper
2016OpSimEval - Ziele, Ergebnisse, Status & nächste Schritte
Marten, Frank; Braun, M.
Presentation
2016Optimal configuration of manufacturing cells for high flexibility and cost reduction by component substitution
Holtewert, Philipp; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Optimal provision of primary frequency control with battery systems by exploiting all degrees of freedom within regulation
Hollinger, Raphael; Diazgranados, Luis M.; Wittwer, Christof; Engel, Bernd
Journal Article, Conference Paper
2016Optimierungsmodell zur Planung der direkten Wiederverwendung bei der Vermietung mobiler und langlebiger Investitionsgüter in Closed-Loop Supply Chains
Braun, Anja-Tatjana
: Bauernhansl, Thomas (Hauptberichter); Tilebein, Meike (Mitberichter)
Dissertation
2016Optimized Grain Size of Seed Plates for High Performance Multicrystalline Silicon
Krenckel, P.; Riepe, S.; Schindler, F.; Strauch, T.
Conference Paper
2016Optimized solder alloy for glass-to-metal joints by simultaneous soldering and anodic bonding
Malfait, W.J.; Klemencic, R.; Lang, B.; Rist, T.; Klucka, M.; Zajacz, Z.; Koebel, M.M.
Journal Article
2016Optische Größenvermessung von Holzpartikeln für die WPC-Herstellung
Plinke, B.; Benthien, J.T.; Krause, A.; Krause, K.C.; Schirp, A.; Teuber, L.
Journal Article
2016OptPlanEnergie - an optimization and scheduling platform for the energy-efficient production of tempered glass
Baumann, Frank; Wilson, Heike; Seidel, Stephan; Franke, Matthias; Gromnitza, Ulrike
Conference Paper
2016Overall commissioning effectiveness: Systematic identification of value-added shares in material supply
Adolph, Siri; Kübler, Patrick; Metternich, Joachim; Abele, Eberhard
Journal Article, Conference Paper
2016An overview of mechanisms for improving software architecture understandability
Zakrzewski, Sophie
: Rombach, H. Dieter (Supervisor); Weitzel, Balthasar (Supervisor)
Bachelor Thesis
2016Ozonbasierte Reinigungs- und Konditionierungsverfahren für die Herstellung hocheffizienter Silizium Solarzellen
Moldovan, Anamaria
: Rühe, J.; Weber, E.
Dissertation
2016Panel Level Embedding for Power and Sensor Applications
Aschenbrenner, Rolf
Presentation
2016Parametrization and validation of lithium ion battery cell models
Gulbins, Matthias; Markwirth, Thomas; Haase, Joachim; Melcher, Andreas; Lei, Boxia; Rohde, Magnus; Ziebert, Carlos; Seifert, H.J.; Verhaag, Benno
Poster
2016Particle properties and crystal structure of ADN-prills
Heintz, Thomas; Herrmann, Michael; Leisinger, Karlfred; Reinhard, Werner
Conference Paper
2016Partnerselektionslogiken im Innovationsprozess. Empirische Befunde zur Bedeutung von sozio-materiellen Handlungskontexten für die praktischen Konstitution von informellen Konsultationsnetzwerken in F&E
Roth, Philip
Report
2016Pathogens inactivated by low-energy-electron irradiation maintain antigenic properties and induce protective immune responses
Fertey, Jasmin; Bayer, Lea; Grunwald, Thomas; Pohl, Alexandra; Beckmann, Jana; Gotzmann, Gaby; Portillo Casado, Javier; Schönfelder, Jessy; Rögner, Frank-Holm; Wetzel, Christiane; Thoma, Martin; Bailer, Susanne M.; Hiller, Ekkehard; Rupp, Steffen; Ulbert, Sebastian
Journal Article
2016A patient-specific foot model for the estimate of ankle joint forces in patients with juvenile idiopathic arthritis
Prinold, Joe A.I.; Mazzà, Claudia; Marco, Roberto di; Hannah, Iain; Malattia, Clara; Magni-Manzoni, Silvia; Petrarca, Maurizio; Ronchetti, Anna B.; Tanturri De Horatio, Laura; Dijkhuizen, Pieter E.H. van; Wesarg, Stefan; Viceconti, Marco
Journal Article
2016PC1Dmod 6.2 - improved simulation of c-Si devices with updates on device physics and user interface
Haug, H.; Greulich, J.
Journal Article, Conference Paper
2016Penetration tests a turning point in security practices? Organizational challenges and implications in a software development team
Türpe, Sven; Kocksch, Laura; Poller, Andreas
Conference Paper
2016Performance of df/dt-based Inertia Control during Emergency Islanding
Duckwitz, Daniel
Conference Paper
2016Personal air vehicles
Grigoleit, Sonja
Journal Article
2016PEV-charging in rural and business environments. A user behaviour and demand comparison
Wagner, Sabine; Klausmann, Florian; Lange, Ralph; Göhler, Georg; Triebke, Henriette; Schmidt, Sarah; Edel, Fabian
Presentation
2016Pflegewagen werden intelligent
Graf, Birgit; King, Ralf Simon
Journal Article
2016Photovoltaic Development Standardizing Based on Roadmaps and Technology Readiness Levels
Baliozian, P.; Mourad, S.; Morse, D.; Kim, S.; Friedrich, L.; Preu, R.
Conference Paper
2016Physical layer link modeling for mobile ad-hoc networks (MANET)
Fischer, Jörg
: Greil, P.; Heuberger, Albert; Koch, W.
Dissertation
2016Piezobasierte Zusatzachsen für hybride Bearbeitungsverfahren
Bucht, Andre; Pagel, Kenny; Ullrich, Markus; Kunze, Holger; Drossel, Welf-Guntram
Presentation
2016Planning method for the design of flexible as well as economic assembly and logistics processes in the automotive industry
Küber, Christian; Westkämper, Engelbert; Keller, Bernd; Jacobi, Hans-Friedrich
Journal Article, Conference Paper
2016Planning of workstations in a modular automotive assembly system
Kern, Wolfgang; Rusitschka, Fabian; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Plant phenotyping using probabilistic topic models: Uncovering the hyperspectral language of plants
Wahabzada, M.; Mahlein, A.-K.; Bauckhage, C.; Steiner, U.; Oerke, E.-C.; Kersting, K.
Journal Article
2016Poly(Epichlorohydrin-CO-1,2-Epoxyhexane) - a promising precursor for an energetic azido polymer for cast-cure processing
Hafner, Sven; Keicher, Thomas; Klapötke, Thomas M.
Conference Paper
2016Porosity determination of carbon fiber reinforced plastics (CFRP) in aviation applications using ultrasound without a back wall echo
Kurz, Jochen Horst; Rabe, Ute
Conference Paper
2016Positioning glass: Investigating display positions of monocular optical see-through head-mounted display
Chua, Soon Hau; Perrault, Simon T.; Matthies, Denys J.C.; Zhao, Shengdong
Conference Paper
2016Post-Quantum-Kryptografie
Ruhlig, Klaus
Journal Article
2016Potential controlled tribological behavior of water-based ionic liquids
Amann, T.; Dold, C.; Kailer, A.
Conference Paper
2016Potential gain through implementation of astigmatic corrected heliostats
Rooyen, W. van de; Schöttl, P.; Bern, G.; Heimsath, A.; Nitz, P.; Dinter, F.; Harms, T.M.
Conference Paper
2016Potentiale des BIM-basierten Entwurfs und Betriebs in der Gebäudeautomation
Stenzel, Pit
Presentation
2016Potenziale durch Digitalisierung in Produktion und Intralogistik - Einblick in aktuelle Entwicklungen
Langer, Tino
Presentation
2016Potenziale einer innovativen Stadt-Logistik in Bottrop
Stütz, Sebastian; Siedlarek, Laura; Auffermann, Christiane
: Clausen, Uwe (Hrsg.)
Study
2016Potenziale hybrider Zerspanungsprozesse
Hochmuth, Carsten
Presentation
2016Power System Restoration. How could wind energy generators be included into today's restoration plans?
Becker, H.; Mende, D.; Hennig, T.; Akbulut, A.; Hofmann, L.
Conference Paper
2016Praxisbericht über die lichttechnische Planung mit Sonnenschutz- und Tageslichtlenksystemen
Wössner, Simon; Budde, Eike; Boer, Jan de; Witzel, Daniel; Seegers, Marco; Polle, Dieter
Conference Paper
2016Pre-treatment of organic residues for optimized biogas production
Weger, Andreas; Wiesgickl, Sonja; Jung, Rolf; Stenzel, Fabian; Hornung, Andreas
Presentation
2016Precipitate growth in multi-component systems with stress relaxation by diffusion and creep
Svoboda, J.; Fischer, F.D.; Riedel, H.; Kozeschnik, E.
Journal Article
2016Predictive maintenance in forming machines
Wabner, Markus; Singer, Adrian
Presentation
2016Present status of Roll-to-Roll fabrication for OLED lighting
Stanel, Michael; Wanski, Tomasz; Mogck, Stefan
Conference Paper
2016Prevalidation of the ex-vivo model PCLS for prediction of respiratory toxicity
Hess, A.; Wang-Lauenstein, Lan; Braun, Armin; Kolle, S.N.; Landsiedel, Robert; Liebsch, M.; Ma-Hock, Lan; Pirow, R.; Schneider, X.; Steinfath, M.; Vogel, S.; Martin, C.; Sewald, Katherina
Journal Article
2016Preventing pass-the-hash and similar impersonation attacks in enterprise infrastructures
Oberle, Alexander; Larbig, Pedro; Marx, Ronald; Weber, Frank G.; Scheuermann, Dirk; Fages, Daniel; Thomas, Fabien
Conference Paper
2016Prioritization in incremental requirements engineering
Riegel, Norman
: Rombach, Dieter (Prüfer); Daneva, Maya (Prüfer)
Dissertation
2016Privacy-respecting smart video surveillance based on usage control enforcement
Birnstill, Pascal
: Beyerer, Jürgen (Gutachter)
Dissertation
2016A probabilistic constitutive model for closed-cell foams
Beckmann, C.; Hohe, J.
Journal Article
2016Process analysis for magnetic pulse welding of aluminium-copper joints
Psyk, Verena; Scheffler, Christian; Linnemann, Maik; Landgrebe, Dirk
Presentation
2016Process & machine development for the integration of conductive paths inside a 3D printed microsystem
Günthel, Jessica; Holzinger, Dieter; Birch, Richard; Refle, Oliver
Conference Paper
2016Process characteristics in high-precision laser metal deposition using wire and powder
Brückner, Frank; Riede, Mirko; Marquardt, Franz; Willner, Robin; Seidel, André; Thieme, Sebastian; Leyens, Christoph; Beyer, Eckhard
Conference Paper
2016Process for preforming continuous fibre-reinforced thermoplastic semi-finished products
Mittmann, Anne; Naumann, Mario; Kroll, Lothar
Poster
2016Process steam and chilled water production with CPC-collectors, steam jet ejector chiller and latent heat storages
Joemann, Michael; Oezcan, Tunay; Kauffeld, Michael; Pollerberg, Clemens
Journal Article, Conference Paper
2016Processing line for stacked DE-actuator modules
Wegener, Michael; Biedermann, Miriam; Seidel, Sven-Oliver; Krüger, Hartmut
Poster
2016PRODUCTION TECHNOLOGY in the new World of Data - in a direct Line to the Product
Putz, Matthias
Presentation
2016Prototyping smart city applications over large scale M2M testbed
Mukudu, Nyasha; Ventura, Neco; Mwangama, Joyce; Elmangoush, Asma; Steinke, Ronald; Magedanz, Thomas
Conference Paper
2016Prozesse durch Digitalisierung nachhaltig optimieren
Tüllmann, Carina; Prasse, Christian; Sagner, Denise; Piastowski, Helena
Report
2016Prozessverbesserung durch Fragmentierte Anwendung von Scrum & Co.
Diebold, Philipp; Zehler, Thomas; Schmitt, Anna; Simon, Frank; Kruse, Birger
Report
2016Public-private partnerships in research and innovation: Trends and international perspectives
: Koschatzky, Knut (Hrsg.); Stahlecker, Thomas (Hrsg.)
Book
2016A PVT collector concept with variable film insulation and low-emissivity coating
Lämmle, M.; Thoma, C.; Hermann, M.
Journal Article, Conference Paper
2016Qualität 4.0 für die additive Fertigung der Zukunft. Intelligente Qualitätssicherung und Optimierung
Fulga, Simina
Presentation
2016Qualitative und quantitative tageslichttechnische Fassadenplanung
Wössner, Simon; Budde, Eike; Boer, Jan de; Witzel, Daniel; Seegers, Marco
Conference Paper
2016Quality rating of silicon wafers - a pattern recognition approach
Demant, Matthias
: Weber, E.; Brox, T.
Dissertation
2016Quantifying resilience for resilience engineering of socio technical systems
Häring, Ivo; Ebenhöch, Stefan; Stolz, Alexander
Journal Article
2016Quantitative Betriebsmittelbedarfsplanung für die getaktete Fließfertigung
Dinse, Jakob
: Stark, Rainer
Dissertation
2016Quantitative Darstellung der Wirkungen landnutzender Prozesse auf die Biodiversität in Ökobilanzen
Lindner, Jan Paul
: Mehra, Schew-Ram; Birkmann, Jörn; Sedlbauer, Klaus (Hrsg.); Leistner, Philipp (Hrsg.)
Dissertation
2016Quantum cascade laser based active hyperspectral imaging for standoff detection of chemicals on surfaces
Hugger, Stefan; Fuchs, Frank; Jarvis, J.P.; Yang, Q.K.; Rattunde, M.; Ostendorf, R.; Schilling, C.; Draid, R.; Bronner, W.; Aidam, R.; Wagner, J.; Tybussek, Thorsten; Rieblinger, Klaus
Conference Paper
2016Querwalzen von Leichtmetallen
Steger, Jürgen
Conference Paper
2016Radiation tests on optical materials
Höffgen, Stefan; Kuhnhenn, Jochen
Presentation
2016Rating of CPV modules: Results of module round robins
Steiner, Marc; Siefer, Gerald; Baudrit, Mathieu; Askins, Stephen; Domínguez, César; Antón, Ignacio; Roca, Francesco; Fucci, Raffaele; Cancro, Carmine; Romano, Antonio; Graditi, Giorgio; Pugliatti, Paola Maria; Stefano, Agnese di; Kenny, Robert; Norton, Matthew; Minuto, Alessandro; Morabito, Paolo; Muller, Matthew; Riley, Daniel; Pratt, Larry
Conference Paper
2016RAWIS: The next generation of automated inspection systems for railway wheels
Knam, Andreas; Schwender, Thomas; Kappes, Wolfgang; Baumgarten, Rolf
Conference Paper
2016Real-time schedule optimization in shared electric vehicle fleets
Kötter, Falko; Ostermann, Julien
Conference Paper
2016Recent advances and applications of external Cavity-QCLs towards hyperspectral imaging for standoff detection and real-time spectroscopic sensing of chemicals
Ostendorf, R.; Butschek, L.; Hugger, S.; Fuchs, F.; Yang, Q.; Jarvis, J.; Schilling, C.; Rattunde, M.; Merten, A.; Grahmann, J.; Boskovic, D.; Tybussek, T.; Rieblinger, K.; Wagner, J.
Journal Article
2016Referenzarchitektur für die Kommunikation im IIoT
Heidrich, Mike
Presentation
2016Ein Referenzmodell für Server Based Computing Infrastrukturen und dessen Anwendung für das Kapazitätsmanagement
Knermann, Christian
: Müller-Clostermann, Bruno (Gutachter); Echtle, Klaus (Gutachter)
Dissertation
2016Regulatory barriers for the circular economy
Barneveld, Joost van; Veen, Geert van der; Enenkel, Kathrin; Mooren, Caro; Talman-Gross, Larissa; Eckartz, Katharina; Ostertag, Katrin; Duque-Ciceri, Natalia; Fischer, Tamara; Gama, Margarida; Scheidt, Lutz; Wilts, Henning; Schäfer, Lukas; Fischer, Susanne
Report
2016Reinigungsverfahren. Produkt- und Teilereinigung im Reinraum
Metzmacher, Max
Presentation
2016Relative densities and void ratios derived from CPT data using in situ field calibration
Biryaltseva, T.; Mörz, T.; Brandt, S.; Kreiter, S.; Gerdes, U.; Ossig, B.
Conference Paper
2016Relative density prediction based on in-situ and laboratory measurements of shear wave velocity
Biryaltseva, T.; Lunne, T.; Kreiter, S.; Mörz, T.
Conference Paper
2016Reliable message forwarding in VANETs for delay-sensitive applications
Roscher, Karsten; Maierbacher, Gerhard
Conference Paper
2016Remanufacturing process assessment - a holistic approach
Butzer, Steffen; Schötz, Sebastian; Steinhilper, Rolf
Journal Article, Conference Paper
2016Remote laser vibrometry for wind turbine blades
Kaufmann, Ilja; Scherer-Klöckling, Clemens; Lutzmann, Peter; Scherer-Negenborn, Norbert; Ebert, Reinhard
Journal Article
2016Representation of optical power variation from parabolic trough, linear fresnel and Scheffler-reflector concentrating collectors for solar process heat systems
Rooyen, D.W. van; Heimsath, A.
Conference Paper
2016Resource Efficient Production - Meeting Research and Industry Challenges in the E³-Production Concept
Putz, Matthias
Presentation
2016Resource optimized product design - assessment of a product's life cycle resource efficiency by combining LCA and PLM in the product development
Ko, Nathanael; Graf, Roberta; Buchert, Tom; Kim, Marcus; Wehner, Daniel
Journal Article, Conference Paper
2016Ressourceneffiziente Erzeugung ultra-transparenter Elektroden durch perkolierende Nanostrukturen
Ackermann, Thomas
: Westkämper, Engelbert (Hauptberichter); Frühauf, Norbert (Mitberichter)
Dissertation
2016Ressourceneffizienz durch Industrie 4.0
Sauer, Alexander
Presentation
2016Retrofit of multi-family homes with central heat recovery ventilation, learnings from three case studies
Coydon, F.; Herkel, S.; Henning, H.-M.
Conference Paper
2016Review of standardization opportunities in smart industrial components
Gonçalves, Gil; Wolny, Patricia; Meyer, Tanja
Presentation
2016Rheological investigations of paraffin based phase change slurry using a pipe viscosimeter
Kappels, Tobias; Hanu, Lucian George; Pollerberg, Clemens
Conference Paper
2016Rixels: Towards secure interactive 3D graphics in engineering clouds
Altenhofen, Christian; Dietrich, Andreas; Stork, André; Fellner, Dieter W.
Journal Article
2016Roadmapping in der Praxis
Abele, Thomas; Hammann, Gerhard; Kaiser, Ulrich; Kröller, Alexander; Phaal, Rob; Schimpf, Sven; Thielmann, Axel; Warschat, Joachim
: Schimpf, Sven (Hrsg.)
Conference Proceedings
2016Roboter-Schwärme
Huppertz, Guido
Journal Article
2016Robuste adaptive Sensornetze für die Zustandsüberwachung (Condition Monitoring) an Bauwerken - RadCoM -
Enge-Rosenblatt, Olaf; Frotzscher, Andreas; Priwitzer, Holger; Splitt, Ingmar
Report
2016Röntgenanalyse der Pyxis von Bierfeld, Gemeinde Nonnweiler, Flur "Vor dem Erker", Fundstelle 5
Schorr, Christian; Fritsch, Thomas
Journal Article
2016Room segmentation: Survey, implementation, and analysis
Bormann, Richard; Jordan, Florian; Wenzhe, Li; Hampp, Joshua; Hägele, Martin
Conference Paper
2016A round robin test on flash thermography
Rothbart, Nick; Maierhofer, Christiane; Goldammer, Matthias; Hohlstein, Felix; Koch, Joachim; Kryukov, Igor; Mahler, Guido; Stotter, Bernhard; Walle, Günter; Oswald-Tranta, Beate; Sengebusch, Martin
Conference Paper
2016ROUNDTABLE: INDUSTRIE 4.0 - Definition, Chancen und Risiken
Schröder, Andreas
Presentation
2016RTI-potential at interfaces between logistics and freight transport in Austria
Stein, Sandra; Brunnthaller, Georg; Dörr, Heinz; Romstorfer, Andreas; Marsch, Viktoria; Pöchtrager, Siegfried; Strobel, Christine; Sajovitz, Pia; Hörl, Bardo; Berkowitsch, Claudia; Wanjek, Monika
Journal Article, Conference Paper
2016Sandwich manufacturing with foam core and coversheets out of aluminum - a new process without rolling
Holders, Karsten; Hohlfeld, Jörg; Hipke, Thomas
Presentation
2016Sandwich structures consisting of aluminum foam core and fiber reinforced plastic top layers
Drebenstedt, Claudia; Rybandt, Susi; Drossel, Welf-Guntram; Trautmann, Maik; Wagner, Guntram
Presentation
2016Schaltbare Heatpipe mit strukturintegrierter Formgedächtnisaktorik
Schneider, Dorothea; Lauer, Martin; Ohsenbrügge, Christoph
Study
2016School of the future: Auf dem Weg zur Nullenergie bei gleichzeitig hohem Raumkomfort
Erhorn-Kluttig, Heike; Doster, Sarah; Erhorn, Hans
Book
2016School of the future: Towards zero emission with high performance indoor environment
Erhorn-Kluttig, Heike; Doster, Sarah; Erhorn, Hans
Book
2016Screen-printed metallization concepts for large-area back-contact back-junction silicon solar cells
Hendrichs, M.; Padilla, M.; Walter, J.; Clement, F.; Rech, B.
Journal Article
2016Security analysis of OpenDayLight, ONOS, RoseMary and RYU SDN controllers
Arbettu, Ramachandra Kamath; Khondoker, Rahamatullah; Bayarou, Kpatcha; Weber, Frank
Conference Paper
2016Security Research Conference. 11th Future Security
: Ambacher, Oliver (Ed.); Wagner, Joachim (Ed.); Quay, Rüdiger (Ed.)
Conference Proceedings
2016SeismoPen: Pulse recognition via a smart pen
Matthies, Denys J.C.; Haescher, Marian; Bieber, Gerald; Salomon, Ralf; Urban, Bodo
Conference Paper
2016Sektorübergreifende Modellierung und Optimierung eines zukünftigen deutschen Energiesystems unter Berücksichtigung von Energieeffizienzmaßnahmen im Gebäudesektor
Palzer, Andreas
: Henning, Hans-Martin; Fichtner, Wolf
Dissertation
2016Selbstlokalisation eines Mikroflugsystems mit Laserscannern zur 3D-Kartierung von Innenräumen
Knipp, Kalle
: Joppich, Wolfgang; Rothe, Irene
Bachelor Thesis
2016Self-pierce riveting of materials with limited ductility investigated with the Bai-Wierzbicki damage model in GISSMO
Hofmann, Martin; Andersson, Robert; Wallmersperger, Thomas; Jäckel, Mathias; Landgrebe, Dirk
Presentation
2016Semantic Publishing Challenge: Bootstrapping a Value Chain for Scientific Data
Vahdati, Sahar; Dimou, Anastasia; Lange, Christoph; Iorio, Angelo di
Conference Paper
2016A sensitivity analysis of the stepwise measurement procedure for the characterization of large area PV modules
Rapp, C.; Steiner, M.; Siefer, G.; Bett, A.W.
Journal Article
2016Sensor and control concept for a wearable robot for manual load handling assistance
Stelzer, Patrick; Otten, Bernward; Kraus, Werner; Pott, Andreas
Conference Paper
2016Sensor glove for an intuitive human-machine interface for exoskeletons as manual load handling assistance
Stelzer, Patrick; Kraus, Werner; Pott, Andreas
Conference Paper
2016Sensorless control for active damping of torsional vibrations in wind turbine drivetrains with doubly-fed induction generator
Wenske, J.; Beckert, U.
Conference Paper
2016Shared E-Fleet - Fahrzeugflotten wirtschaftlich betreiben und gemeinsam nutzen
: Renner, Thomas (Hrsg.); Tippelskirch, Matthias von (Hrsg.)
Study
2016Sicherheit, Funktionalität und Wertschöpfung - die Schlüssel zur fokussierten Risikoanalyse
Schloske, Alexander
Presentation
2016Silver grid finger corrosion on snail track affected PV modules - investigation on degradation products and mechanisms
Duerr, I.; Bierbaum, J.; Metzger, J.; Richter, J.; Philipp, D.
Journal Article, Conference Paper
2016Simplified S/C vulnerability assessments at component level in early design phase at ESA's CDF
Kempf, S.; Schäfer, F.; Cardone, T.; Ferreira, I; Gerene, S.; Destefanis, R.; Grassi, L.
Conference Paper
2016Simulating the effect of production lot sizes on material and energy efficiency
Sheehan, Erin; Kuhlmann, Timm; Sauer, Alexander
Journal Article, Conference Paper
2016Simulating wafer bow for integrated capacitors using a multiscale approach
Wright, Alan; Krach, Florian; Thielen, Nils; Grünler, Saeideh; Erlbacher, Tobias; Pichler, Peter
Conference Paper
2016Simulation für die Praxis: Effiziente Gestaltung für Beschichtungen
Schwanzer, Peter; Schmid, Klaus
Presentation
2016Simulation of double base propellant combustion using the ICT-cellular-combustion-algorithm
Wurster, Sebastian
Conference Paper
2016Simulation of elastic properties of spacer fabrics and its effective permeability at different compression states
Fassbender, A.; Orlik, J.; Pietsch, K.; Rief, S.; Shamanskiy, A.
Conference Paper
2016Simulation of electromagnetic inspection techniques using FEM analysis
Gabi, Yasmine; Wolter, Bernd; Kern, Rolf; Conrad, Christian; Gerbershagen, Andreas
Conference Paper
2016Simulation of silicon-dot-based single-electron memory devices
Klüpfel, Fabian Johannes; Burenkov, Alexander; Lorenz, Jürgen
Conference Paper
2016Simulation of ultrasonic inspection of complex components using a 3D-FDTD-approach
Pandala, Abishek; Balasubramaniam, Krishnan; Spies, Martin
Conference Paper
2016Simulation-based assessment and optimization of the energy consumption in multi variant production
Kruse, Andreas; Uhlemann, Thomas H.-J.; Steinhilper, Rolf
Conference Paper, Journal Article
2016Simultaneous electrochemical impedance spectroscopy and localized surface plasmon resonance in a microfluidic chip: New insights into the spatial origin of the signal
Lazar, Jaroslav; Rosencrantz, Ruben R.; Elling, Lothar; Schnakenberg, Uwe
Journal Article
2016Simultaneous frequency stabilization and high-power dense wavelength division multiplexing (HP-DWDM) using an external cavity based on volume Bragg gratings (VBGs)
Hengesbach, S.; Klein, S.; Holly, C.; Witte, U.; Traub, M.; Hoffmann, D.
Conference Paper
2016Situation-based methodology for planning the commissioning of special machinery using bayesian networks
Poeschl, Sebastian; Wirth, Frank; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Skype for Business - Eine Einschätzung
Messerer, Thomas
Study
2016Small-disturbance voltage stability of OLTC & decentralized reactive power dropp control
Dallmer-Zerbe, K.; Berardo, D.; Salman, A.; Wille-Haussmann, B.
Conference Paper
2016Smart Home
Kohlhoff, Jürgen
Journal Article
2016The smart learning approach - a mobile learning companion application
Krauss, Christopher; Merceron, Agathe; An, Truong-Sinh; Zwicklbauer, Miggi; Arbanowski, Stefan
Conference Paper
2016Smart Production Systems
Zorn, Wolfgang
Presentation
2016Smart Production und Modularisierung
Putz, Matthias
Presentation
2016Smart Tools for Smart Design - Eine interdisziplinäre Projektidee
Weisheit, Linda
Presentation
2016Smart-TV und Privatheit
Ghiglieri, Marco; Hansen, Marit; Nebel, Maxi; Pörschke, Julia V.; Fhom, Hervais S.
: Zoche, Peter (Hrsg.)
Report
2016SmartMove: A smartwatch algorithm to distinguish between high- and low-amplitude motions as well as doffed-states by utilizing noise and sleep
Haescher, Marian; Trimpop, John; Bieber, Gerald; Urban, Bodo
Conference Paper
2016Smuggling radioactive material - a demonstration exercise in the framework of EU-project EDEN
Chmel, Sebastian; Friedrich, Hermann; Glabian, Jeannette; Köble, Theo; Risse, Monika; Ossowski, Stefan; Schumann, Olaf; Dominicis, Luigi de; Palucci, Antonio; Hetterley, Colin; Jordan, Derek
Conference Paper
2016Social Acceptance of Alternative Mobility Systems in Tunis
Kilian-Yasin, Katharina; Wöhr, Melanie; Tangour, Cyrine; Fournier, Guy
Journal Article, Conference Paper
2016Socially responsible research processes for sustainability transformation: An integrated assessment framework
Daedlow, Katrin; Podhora, Aranka; Winkelmann, Markus; Kopfmüller, Jürgen; Walz, Rainer; Helming, Katharina
Journal Article
2016Softwarelösungen für das Energiemanagement von morgen
Sauer, Alexander; Weckmann, Sebastian; Zimmermann, Fabian
: Spaeth, Birgit (Red.); Willig, Viola (Red.)
Study
2016Solar cells with 20% efficiency and lifetime evaluation of epitaxial wafers
Drießen, M.; Amiri, D.; Milenkovic, N.; Steinhauser, B.; Lindekugel, S.; Benick, J.; Reber, S.; Janz, S.
Journal Article, Conference Paper
2016Spatial-aware iterative integration of crisis management information systems
Sojeva, Betim; Xie, Jingquan
Conference Paper
2016Spatially resolved scatter measurement of diffractive micromirror arrays
Sicker, Cornelius; Heber, Jörg; Berndt, Dirk
Journal Article
2016Spectrum sensing infrastructure support for IEEE 1900.6b sensing-assisted spectrum databases
Bochow, Bernd; Holland, Oliver; Katzis, Konstantinos
Conference Paper
2016Spontaneous malignant craniopharyngioma in an aged Wistar rat
Heinrichs, Martin; Ernst, Heinrich
Journal Article
2016SPS Konzept zur Steuerung eines Prüfroboters und eines zerstörungsfreien Prüfverfahren-Datenaufnahmesystems am Beispiel Thermographie
Zins, Werner
: Valeske, Bernd; Ehlen, Andreas; Finckbohner, Michael
Bachelor Thesis
2016Stability of global climate cooperation under uncertainty
Kersting, Jan
Book
2016Stakeholders´ Requirements and Reference Scenarios. Deliverable D2.1
Diamantopoulou, Vasiliki; Mouratidis, Haralambos; Pavlidis, Michalis; Rekleitis, Evangelos
Report
2016Standardized assessment of meteorological data from FINO platforms
Bastigkeit, I.; Bégué, F.; Frühmann, R.; Gates, L.; Herklotz, K.; Leiding, T.; Müller, S.; Neumann, T.; Schwenk, P.; Sedlatschek, R.; Senet, C.; Tinz, B.; Wilts, F.
Poster
2016State-of-the-art and status of offshore wind energy in Europe
Wingerde, Arno van
Presentation
2016Statistical Delay Bound for WirelessHART Networks
Petreska, Neda; Al-Zubaidy, Hussein; Staehle, Barbara; Knorr, Rudi; Gross, James
Conference Paper
2016Steigerung der Energieeffizienz in der Automationstechnik. Die erfolgversprechendsten Ansätze
Zimmermann, Fabian
Presentation
2016Stellungnahme zur öffentlichen Anhörung des Haushalts- und Finanzausschusses
Rebeggiani, Luca
Report
2016Strukturbasierte Registrierung von Kamera-Laser-Punktwolken
Berninger, Nils Axel Georg
: Surmann, Hartmut (Prüfer); Worst, Rainer (Prüfer)
Master Thesis
2016Study of SEM preparation artefacts with correlative microscopy: Cell shrinkage of adherent cells by HMDS-drying
Katsen-Globa, Alisa; Puetz, Norbert; Gepp, Michael M.; Neubauer, Julia C.; Zimmermann, Heiko
Journal Article
2016Studying Dynamics of User Behavior. Heterocedastic Time Series Forecasting and Clustering of Inhomogeneous Poisson Process
Cvejoski, Kostadin
: Bauckhage, Christian; Wrobel, Stefan
Master Thesis
2016Success with electric mobility
Lamberth-Cocca, Sabrina; Friedrich, Michaela
Study
2016Sudden cardiac arrest and the role of crowd tasking apps for risk mitigation
Wurster, Simone; Fiedrich, Frank; Klafft, Michael; Bohn, Andreas
Conference Paper
2016Superkondensatoren als Puffersysteme zur Speicherung von elektrischer Energie in Automobilanwendungen - SkiPper
Neuhaus, Raphael; Glanz, Carsten
Report
2016Supporting new strategic models of science-industry R&D collaboration - a review of global experiences
Kroll, Henning
Report
2016Supporting product configuration in application engineering using EXConfig
Zhang, Bo; Becker, Martin
Report
2016Surface inspection and remanence imaging with magnetic field distortion measurement
Youssef, Sargon; Szielasko, Klaus; Sourkov, Alexander; Gupta, Bhaawan; Youssef, Amir
Conference Paper
2016Surface modification of polyethylene terephthalate (PET) and oxide coated PET for adhesion improvement
Fichtner, Juliane; Beck, Tobias; Simon, Frank
Conference Paper
2016Surface, near-surface and volume inspection of cast components using complementary NDT approaches
Spies, Martin; Rieder, Hans; Rauhaut, Markus; Kreier, Peter
Conference Paper
2016Susceptibility, vulnerability, and averaged risk analysis for resilience enhancement of urban areas
Fischer, Kai; Häring, Ivo; Riedel, Werner; Vogelbacher, Georg; Hiermaier, Stefan
Journal Article
2016Symposium Anodisieren - Oxidschichten von hart bis smart 2016
: Michaelis, Alexander; Schneider, Michael
Conference Proceedings
2016Synthese und Charakterisierung von Epoxy/Acrylat Core-Shell Dispersionen und ihre Eignung für Korrosionsschutzbeschichtungen
Kommer, Daniel; Christ, Ulrich; Bremser, Wolfgang
Conference Paper
2016System design of programmable 4f phase modulation techniques for rapid intensity shaping - a conceptual comparison
Roth, Matthias; Heber, Jörg; Janschek, Klaus
Conference Paper
2016Systematische Betrachtung nichtfunktionaler Anforderungen beim Entwurf von I4.0 Service-Infrastrukturen
Denzer, R.; Sutschet, Gerhard
Conference Paper
2016Szenariobasierte Bewertung der Zukunftsrelevanz von Nachhaltigkeitstechnologien
Berner, Simon; Dönitz, Ewa; Westhofen, Aline; Moller, Björn
Journal Article
2016Tackling unwanted proteolysis in plant production hosts used for molecular farming
Mandal, Manoj K.; Ahvari, Houtan; Schillberg, Stefan; Schiermeyer, Andreas
Journal Article
2016Tailored composite transducers based on piezoceramic fibres and pearls
Hohlfeld, Kai; Neumeister, Peter; Michaelis, Alexander; Gebhardt, Sylvia
Conference Paper
2016Taking the step towards a more dynamic view on raw material criticality: An indicator based analysis for Germany and Japan
Glöser-Chahoud, Simon; Tercero Espinoza, Luis A.; Walz, Rainer; Faulstich, Martin
Journal Article
2016Tangible industry 4.0: A scenario-based approach to learning for the future of production
Erol, Selim; Jäger, Andreas; Hold, Philipp; Ott, Karl; Sihn, Wilfried
Journal Article, Conference Paper
2016Target system based design of quality control strategies in global production networks
Arndt, Tobias; Lemmerer, Christina; Sihn, Wilfried; Lanza, Gisela
Journal Article, Conference Paper
2016Task-Specific Architecture Documentation for Developers
Rost, Dominik; Naab, Matthias
Report
2016Tear-tensile-strength study of biomimetic photo-elastomers
Spielmann-Emden, Eckhardt; Hennig, Kathleen; Meyer, Wolfdietrich
Poster
2016Techno-economic modeling and analysis of redox flow battery systems
Noack, Jens; Wietschel, Lars; Roznyatovskaya, Nataliya; Pinkwart, Karsten; Tübke, Jens
Journal Article
2016Technological development of low-carbon power technology and stability of international climate cooperation
Duscha, Vicki; Kersting, Jan; Peterson, Sonja; Schleich, Joachim; Weitzel, Matthias
Book
2016Das Technologieakzeptanzmodell für kartenbasierte Lernspiele in der Bildauswertung
Streicher, Alexander; Lehmann, E.
Conference Paper
2016Technologien der Industrie 4.0
Bauernhansl, Thomas
Presentation
2016Technologien zur zuverlässigen und effizienten Prüfung von Unterwasser-Tragstrukturen an Offshore-Windenergieanlagen
Weihnacht, Bianca
Report
2016Technologies for micro- and precision machining applications
Kugler, Till; Blau, Peter; Edelmann, Jan; Eckert, Udo; Koriath, Hans-Joachim; Bogachev, Yuri P.; Sakharova, Olga P.
Presentation
2016Technology readiness of SOFC stacks technology - A review
Wunderlich, Christian
Conference Paper
2016Teilvorhaben des Fraunhofer ISI im Verbundprojekt "VIVA KMU" im Verbundprojekt "Entwicklungsperspektiven des Industriellen Mittelstands: Veränderte Innovationsmuster für neue Herausforderungen Deutscher KMU (VIVA KMU). Schlussbericht
Jäger, Angela; Weidner, Nadia; Som, Oliver
Report
2016Temperature and spatially resolved investigations of the microstructure of gun propellants by means of x-ray diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Fietzek, Harald; Böhnlein-Mauß, Jutta; Kaiser, M.
Conference Paper
2016Temperature control of an SThM micro-probe with an heat source estimator and a lock-in measurement
Lenczner, Michel; Yang, Bin; Cogan, Scott D.; Domas, Stêphane; Ke, D.; Couturier, Raphaël; Renault, D.; Köhler, Bernd; Janus, Pawel
Conference Paper
2016Temperature gradient reduction in high-power battery systems using prismatic cells combined with Phase-Change Sheets and Graphite foils
Gepp, M.; Reisenweber, H.; Lorentz, V.R.H.; März, M.
Conference Paper
2016Ten years of product line engineering at danfoss: Lessons learned and way ahead
Fogdal, Thomas; Scherrebeck, Helene; Kuusela, Juha; Becker, Martin; Zhang, Bo
Report
2016Test facility for investigation of impact-initiated bimetallic compounds
Schreiber, Achim; Klahn, Thorsten; Zilly, Andreas; Deimling, Lukas; Schuch, Michael
Conference Paper
2016Test System Architectures using Advanced Standardized Test Languages
Rennoch, Axel
Presentation
2016Testing of CFRP at high strain rates with the Split Hopkinson Tension Bar - Evaluation of testing quality
Paul, Hanna; Ledford, Noah; Mohrmann, Richard; May, Michael
Presentation
2016Testing ultrasonic SH waves to estimate the quality of adhesive bonds in small hybrid structures
Quirin, Steven; Neuhaus, Selina; Herrmann, Hans-Georg
Conference Paper
2016Texture characterization with semantic attributes: Database and algorithm
Bormann, Richard; Esslinger, Dominik; Hundsdörfer, Daniel; Hägele, Martin; Vincze, Markus
Conference Paper
2016Theoretische und experimentelle Untersuchungen zu Stofftransport und Druckverlust in geschütteten und strukturierten Festbetten
Reichelt, Erik
: Lange, Rüdiger (Gutachter); Landmesser, Holger (Gutachter); Michaelis, Alexander (Ed.)
Dissertation
2016Thermal direct joining of metal of fiber reinforced thermoplastic components
Klotzbach, Annett; Langer, Maurice; Pautzsch, Robert; Standfuß, Jens; Beyer, Eckhard
Conference Paper
2016Thermal direct joining of metal-polymer connections
Klotzbach, Annett; Langer, Maurice; Zimmermann, Frieder; Standfuß, Jens; Beyer, Eckhard
Presentation
2016The thermal infrared visual object tracking VOT-TIR2016 challenge results
Felsberg, Michael; Kristian, Matej; Matas, Jiri; Arens, Michael; Krah, Sebastian; Becker, Stefan; Hübner, Wolfgang; et. al.
Conference Paper
2016Thermisch-elektrochemische in-operando Untersuchungen zur lokalen Wärmeentwicklung in Lithiumionenbatteriezellen
Heubner, Christian
: Michaelis, Alexander
Dissertation
2016Thermisches Verhalten rund um die Werkzeugmaschine
 
Conference Proceedings
2016Thermoelectric PEDOT:PSS and single-walled carbon nanotubes composites for printing applications
Leisten, Judith; Stepien, Lukas; Roch, Aljoscha; Dani, Ines; Leyens, Christoph
Presentation
2016Thermography assisted characterisation of production-induced defects in CFRP and their influence on the mechanical behaviour
Summa, Jannik; Schwarz, Michael; Bernarding, Simon; Herrmann, Hans-Georg
Conference Paper
2016Thermogravimetric analysis of molybdenum oxide (MoO3) decomposition
Knapp, Sebastian; Eisenreich, Norbert; Kuchenreuther-Hummel, Veronika; Kelzenberg, Stefan; Koleczko, Andreas; Schuppler, Heike
Conference Paper
2016Thermomanagement im Formenwerkzeugbau mit den Möglichkeiten generativer Fertigung
Rädel, Thomas
Conference Paper
2016Thermomechanical characterization of 22MnB5 steels with special emphasis on stress relaxation and creep behavior
Uppaluri, R.; Helm, D.
Journal Article
2016Thinking outside the box - from the air cleanliness to product contamination
Keller, Markus
Presentation
2016Time efficient nondestructive characterization of customized magneto-optical thin layers for industrial use
Rabung, Madalina; Kopp, Melanie; Szielasko, Klaus; Sheikh Amiri, Meisam
Conference Paper
2016Tiotropium respimat® versus hHndiHaler®: Comparison of bronchodilator efficacy of various doses in clinical trials
Calverley, Peter M.A.; Könen-Bergmann, Michael; Richard, Frank; Bell, Susan; Hohlfeld, Jens M.
Journal Article
2016TiSiCN nanocomposite hard coatings by CVD
Höhn, Mandy; Endler, Ingolf; Matthey, Björn
Conference Paper
2016To what extent may we accept manufacturing-related microscopic defects in cast steel?
Veile, Ines; Tempel, Peter; Weikert-Müller, Miriam
Conference Paper
2016Towards a 300 WP p-Type HIP-MWT-Module - Simulation, Experimental Results and Costs
Spribille, A.; Savisalo, T.; Kraft, A.; Eberlein, D.; Ebert, M.; Fellmeth, T.; Nold, S.; Pantsar, H.; Clement, F.
Conference Paper
2016Towards a novel ultra-high viscosity alginate scaffold for cardiac tissue engineering
Fischer, B.; Gepp, M.M.; Schulz, A.; Dobringer, J.; Vásquez, J.; Gentile, L.; Zimmermann, H.
Poster
2016Towards a rule-based manufacturing integration assistant
Wieland, Matthias; Hirmer, Pascal; Steimle, Frank; Gröger, Christoph; Mitschang, Bernhard; Rehder, Eike; Lucke, Dominik; Abdul Rahman, Omar; Bauernhansl, Thomas
Journal Article, Conference Paper
2016Towards an identification of European indoor environments' impact on health and performance
Grün, Gunnar; Urlaub, Susanne
Report
2016Towards automated aim determination of a social media group: A survey as baseline
Wogatzke, Christian
: Khondoker, Rahamatullah
Term paper
2016Towards flexible and dependable E/E-architectures for future vehicles
Weiß, Gereon; Schleiß, Philipp; Drabek, Christian
Conference Paper
2016Towards industrial exploitation of innovative and harmonized production systems
Calà, Ambra; Foehr, Matthias; Rohrmus, Dominik R.; Weinert, Nils; Meyer, Olha; Taisch, Marco; Boschi, Filippo; Fantini, Paola Maria; Perlo, Pietro; Petrali, Pierluigi; Vallhagen, Johan
Conference Paper
2016Towards modelling of innovation systems: An integrated TIS-MLP approach for wind turbines
Walz, Rainer; Köhler, Jonathan; Lerch, Christian
Report
2016Towards the simulation of manufacturing effects on multi-layered filter media
Kabel, Matthias; Kirsch, Ralf; Staub, Sarah
Conference Paper
2016Transformation of the EFQM approach from business towards operations excellence
Jäger, Andreas; Matyas, Kurt
Journal Article
2016Transient I-V Measurement Set-up for Photovoltaic Laser Power Converters under Monochromatic Irradiance
Reichmuth, S.K.; Helmers, H.; Garza, C.E.; Vahle, D.; Boer, M. de; Stevens, L.; Mundus, M.; Helmers, H.; Bett, A.W.; Siefer, G.
Conference Paper
2016Transparent front side contact pastes for high efficiency SHJ-solar cells
Körner, Stefan; Waltinger, Andreas; Eberstein, Markus
Presentation
2016Transverse pump-probe microscopy of moving breakdown, filamentation and self-organized absorption in alkali aluminosilicate glass using ultrashort pulse laser
Grossmann, D.; Reininghaus, M.; Kalupka, C.; Kumkar, M.; Poprawe, R.
Journal Article
2016Triboelektrische Nanogeneratoren
Langner, Ramona
Journal Article
2016Trockenfunkenerosives Feinbohren von Hochleistungswerkstoffen
Schimmelpfennig, Tassilo-Maria
: Uhlmann, Eckart
Dissertation
2016Troubleshooting wireless coexistence problems in the industrial internet of things
Wetzker, Ulf; Splitt, Ingmar; Zimmerling, Marco; Boano, Carlo Alberto; Römer, Kay
Conference Paper
2016Tuning synthetic semiflexible networks by bending stiffness
Schuldt, Carsten; Schnauß, Jörg; Händler, Tina; Glaser, Martin; Lorenz, Jessica; Golde, Tom; Käs, Josef A.; Smith, David M.
Journal Article
2016Two-dimensional low-coherence interferometry for the characterization of nanometer-wafer-topographies
Taudt, Christopher; Baselt, Tobias; Nelsen, Bryan; Aßmann, Heiko; Greiner, Andreas; Koch, Edmund; Hartmann, Peter
Conference Paper
2016Two-photon polymerization of a branched hollow fiber structure with predefined circular pores
Bieda, Matthias; Bouchard, Felix; Lasagni, Andrés-Fabián
Journal Article
2016Die Ultraeffizienzfabrik (UltraEff-UP) - Ressourcenschonende Produktionstechnologien ohne Emissionen im urbanen Umfeld
Mandel, Jörg; Schließmann, Ursula; Lentes, Joachim; Stender, Siegfried
Report
2016Die Ultraeffizienzfabrik. Spannungsfeld zwischen Produktions-, Energie-und Materialeffizienz
Sauer, Alexander
Presentation
2016Die Ultraeffizienzfabrik. Verlustfrei produzieren im urbanen Umfeld
Sauer, Alexander
Presentation
2016Ultrashort laser pulses for electrical characterization of solar cells
Mundus, Markus
: Willeke, G.; Dekorsy, T.
Dissertation
2016Umgebungskartenschätzung aus Sidescan-Sonardaten für ein autonomes Unterwasserfahrzeug
Woock, Philipp
: Beyerer, Jürgen (Gutachter)
Dissertation
2016Der Umsatz-Nachhaltigkeitsindex
Miehe, Robert; Wiedenmann, Marc; Bauernhansl, Thomas
Journal Article
2016Umsetzung von Normen in einem Forschungsinstitut - Sichere Aufbewahrung und Lagerung radioaktiver Stoffe nach DIN 25422
Köble, Theo; Weinand, Udo
Conference Paper
2016Umweltschutzgerechte Verwertung nicht etablierter Stoffströme in Abfallverbrennungsanlagen
Faulstich, Martin; Vodegel, Stefan; Fedianina, Elena; Franke, Matthias; Degener, Peter; Aigner, Jonathan; Reh, Katharina
Report
2016Understanding the "regional policy mix" - A classification and analysis of European regions' support policies
Kroll, Henning
Report
2016Unified compliance modeling and management using compliance descriptors
Kötter, Falko; Kintz, Maximilien; Kochanowski, Monika; Fehling, Christoph; Gildein, Philipp; Leymann, Frank; Weisbecker, Anette
Conference Paper
2016Universal lab-on-a-chip platform for complex, perfused 3D cell cultures
Sonntag, Frank; Schmieder, Florian; Ströbel, Joachim; Grünzner, Stefan; Busek, Mathias; Steege, Tobias; Polk, Christoph; Klotzbach, Udo; Günther, K.
Conference Paper
2016Unterstützung der Methodenplanung beim Tiefziehen von Blechformteilen auf Servo-Spindelpressen mit variablen Bewegungsverläufen
Kriechenbauer, Sebastian
Conference Paper
2016Untersuchung von Umformverfahren zur endabmessungsgerechten Fertigung von Magneten
Bergmann, Markus; Böhm, Andrea; Drossel, Welf-Guntram
Presentation
2016Untersuchungen zur Eignung mikrohydraulischer Antriebe für die minimal invasive Chirurgie
Cuntz, Timo
: Verl, Alexander (Hauptberichter); Stallkamp, Jan (Mitberichter); Maier, Thomas (Mitberichter)
Dissertation
2016Usage of analytical services in industry today and tomorrow
Colangelo, Eduardo; Bauernhansl, Thomas
Journal Article, Conference Paper
2016The use of mindmapping software for patent search and management
Dirnberger, Dietmar
Journal Article
2016The use of what-if analysis to improve the management of crisis situations
Rome, Erich; Doll, Thomas; Rilling, Stefan; Sojeva, Betim; Voss, Norman; Xie, Jingquan
Book Article
2016Using nondestructive testing methods to characterise production-induced defects in a metal-CFRP hybrid structure
Schwarz, Michael; Summa, Jannik; Herrmann, Hans-Georg
Conference Paper
2016Using trajectories derived by dense optical flows as a spatial component in background subtraction
Radolko, Martin; Farhadifard, Fahimeh
Conference Paper
2016Utilizing wind-turbine failure and operating data for root-cause analysis
Fischer, Katharina
Presentation
2016Vaccination against heart attack?. Editorial
Storsberg, Joachim; Brown, Mark A.; Schmidt, Christian
Journal Article
2016Vacuum plasma treatment and coating of fluoropolymer webs - challenges and applications
Steiner, Cindy; Fahlteich, John
Conference Paper
2016Validation of an ultrasonic-phased-array-method for testing of circumferential welds at thin-walled pipes
Hillmann, Susanne; Schubert, Frank; Schiller-Bechert, David-Maximilian; Bor, Zsolt
Conference Paper
2016Value-focused design of lean production systems based on a system dynamics approach
Drews, Tom; Molenda, Paul; Oechsle, Oliver; Steinhilper, Rolf
Journal Article, Conference Paper
2016Variability mechanisms and lessons learned in practice
Zhang, Bo; Duszynski, Slawomir; Becker, Martin
Report
2016Vectorization of road data extracted from aerial and UAV imagery
Bulatov, Dimitri; Häufel, Gisela; Pohl, Melanie
Conference Paper
2016VEMASinnovativ - eine Plattform für die Digitalisierung und Automatisierung der Industrie
Weidlich, Dieter
Presentation
2016Verfahren zur schnellen, digitalen Modellbildung für Inspektions- und Reengineeringprozesse
Grosser, Hendrik
: Stark, R.
Dissertation
2016Verlustfrei und hocheffizient Spritzlackieren...
Ondratschek, Dieter
Journal Article
2016Vernetzte Daten, Dinge und Dienste - Cyber-Physical-System
Bauernhansl, Thomas
Presentation
2016Verteilte Simulation mehrachsiger magnetischer Positionssensorsysteme
Bretschneider, Jörg; Wang, Xuehao; Neudeck, Willi
Conference Paper
2016Virtual testing of dual-phase steels: Effect of martensite morphology on plastic flow behavior
Pagenkopf, J.; Butz, A.; Wenk, M.; Helm, D.
Journal Article
2016The visual object tracking VOT2016 challenge results
Kristan, Matej; Leonardis, Ales; Matas, Jiri; Becker, Stefan; Krah, Sebastian; Hübner, Wolsgang; Arens, Michael; et. al.
Conference Paper
2016Visualization to support identification, exploitation, and fusion of data and information delivered from heterogeneous sources in ISR
Jamboti, Kavyshree; Camp, Florian van de; Kuwertz, Achim; Haferkorn, Daniel; Eck, Ralf; Grasemann, Gunther
Conference Paper
2016Visualizing global trade flows of copper. An examination of copper contained in international trade flows in 2014
Tercero Espinoza, Luis A.; Soulier, Marcel; Haag, Stefan
Report
2016Von der Produktidee der Maschine bis zur Qualifizierung für hygienische Anwendungen
Keller, Markus
Presentation
2016Von Landesexzellenzinitiativen zu Vernetzung, Digitalisierung, Industrie 4.0
Putz, Matthias; Klimant, Philipp
Presentation
2016Vorentwicklung zur einseitigen berührungslosen und zerstörungsfreien Prüfung von Werkstoffen, durch Optimierung der piezoelektrischen Signalanregung von Luftschallwandlereinheiten mittels optischer Messverfahren
Böttger, David
: Brück, Dietmar A.; Valeske, Bernd
Master Thesis
2016Was ist uns "Sicherheit" wert - und Sicherheit wovor?
Wiemken, Uwe
Report
2016Water adsorption behaviour of CAU-10-H
Fröhlich, D.; Pantatosaki, E.; Kolokathis, P.D.; Markey, K.; Reinsch, H.; Baumgartner, M.; Veen, M.A. van der; Vos, D.E. de; Stock, N.; Papadopoulos, G.K.; Henninger, S.K.; Janiak, C.
Journal Article
2016Water-based starch ester dispersions as binder system in paints and varnishes
Gabriel, Christina; Wanner, Matthias; Wetzel, Hendrik; Radosta, Sylvia; Vorwerg, Waltraud
Poster
2016Wear@Work - a new approach for data acquisition using wearables
Bauer, Dennis; Wutzke, Rolf; Bauernhansl, Thomas
Journal Article, Conference Paper
2016WeaRelaxAble: A wearable system to enhance stress resistance using various kinds of feedback stimuli
Klamet, Josephin; Matthies, Denys J.C.; Minge, Michael
Conference Paper
2016Wege zur Stärkung der wirtschaftlichen Verwertung aus der Wissenschaft
Lehmann, Harald; Schmitz, Velina; Kehrer, Julian; Preissler, Steffen; Preissler, Anzhela; Riemer, Annamaria; Rockel, Jens; Zirkova, Inga
Study
2016Welchen Einfluss wird Industrie 4.0 auf unsere Fabriken und Fabrikplanung haben?
Bauernhansl, Thomas; Dombrowski, Uwe
Presentation
2016Werker der Zukunft: Assistenz im Zeitalter von Industrie 4.0
Aehnelt, Mario; Müller, Andreas
Conference Paper
2016Werkstoffcharakterisierung und Bauteilanalyse mittels optischer Dehnungsanalyse
Müller, Roland
Presentation
2016Wet machining of CFRP
Schneider, Marco; Gebhardt, Andreas; Beckenlechner, Robert
Conference Paper
2016WGP-Standpunkt Industrie 4.0
Bauernhansl, Thomas; Krüger, Jörg; Reinhart, Gunther; Schuh, Günther
: Abele, Eberhard (Hrsg.)
Report
2016What you see is what you get
Sel, Saadettin; Brown, Mark A.; Storsberg, Joachim; Schmidt, Christian
Journal Article
2016Whole model empirical validation on a full-scale building
Strachan, Paul; Svehla, Katalin; Heusler, Ingo; Kersken, Matthias
Journal Article
2016Wie nachhaltig ist das Fairphone 2? - Ergebnisse einer Expertenbefragung
Schischke, Karsten; Proske, Marina; Sommer, Philipp; Trinks, Tina
Study
2016Wild barley introgression library HEB-25 and sensor-based high-throughput phenotyping in field
Draba, Vera; Herzig, Paul; Klück, Hans-Christian; Brauch, Dominic; Maurer, Andreas; Seiffert, Udo; Mock, Hans-Peter; Pillen, Klaus
Poster
2016Willingness to pay for electromobility: An investigation among owners of energy-efficient houses
Jacobs, Leif; Laurenz, Karolyn; Keuchel, Stephan; Thiel, Christoph
Journal Article, Conference Paper
2016Windheizung 2.0 - Energiespeicherung und Stromnetzregelung mit hocheffizienten Gebäuden
Sinnesbichler, Herbert; Kersken, Matthias; Pazold, Matthias; Lenz, Katrin; Erhorn, Hans; Erhorn-Kluttig, Heike; Schumacher, Patrick; Doster, Sarah; Jäger, Michael; Antretter, Florian; Schmidt, Dietrich
Report
2016Wir sind die Technologieberater und Querdenker
Bauernhansl, Thomas; Demont, Anja; Schaeffer, Christoph; Hörcher, Günter
Journal Article
2016Wissensbasierte probabilistische Modellierung für die Situationsanalyse am Beispiel der maritimen Überwachung
Fischer, Yvonne
: Beyerer, Jürgen (Erster Gutachter)
Dissertation
2016Workflow for Automatic i-Vector based Speaker Identification on German Parliament Speakers
Åkermark, Gunnar
: Kraetzschmar, G.K.; Plöger, P.; Stein, D.
Master Thesis
2016Workspace and interference analysis of cable-driven parallel robots with an unlimited rotation axis
Pott, Andreas; Miermeister, Philipp
Conference Paper
2016Young Researchers Symposium, YRS 2016. Proceedings
 
Conference Proceedings
2016Zerstörungsfreie Materialcharakterisierung und Fehlerprüfung von Gusskomponenten
Veile, Ines; Tschuncky, Ralf; Bruche, Dietmar; Kopp, Melanie; Szielasko, Klaus
Journal Article
2016Zerstörungsfreie Materialcharakterisierung und Zustandsbewertung von Beton- und Stahlkomponenten im Bauwesen
Szielasko, Klaus; Youssef, Sargon; Moryson, Ralf M.; Niese, Frank; Rabe, Ute; Herrmann, Hans-Georg
Conference Paper
2016Zukunft des deutschen Maschinen- und Anlagenbaus. Vor welcher technologischen Zukunft stehen wir?
Bauernhansl, Thomas
Presentation
2016Zur Bemessung von zyklisch innendruckbeanspruchten Bauteilen aus Gusseisenwerkstoffen mit Kerbgrundkonzepten
Schönborn, Steffen
Dissertation
2016Zur Verwendung von durch Spaltprofilieren hergestellten Blechstrukturen als wälzbeanspruchte Oberflächen im Vergleich zum Ausgangszustand
Karin, Ivan
Dissertation